diff options
author | Ralf Baechle <ralf@linux-mips.org> | 2005-10-10 15:51:27 +0200 |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-10-19 00:03:48 +0200 |
commit | dcbf8477567c312c9f0512545d07e05175d740a4 (patch) | |
tree | f3eab7df501b02de7bf09bc6b5c0b62cbabe27af /drivers/net | |
parent | [PATCH] ne: Support for RBHMA4500 eval board. (diff) | |
download | linux-dcbf8477567c312c9f0512545d07e05175d740a4.tar.xz linux-dcbf8477567c312c9f0512545d07e05175d740a4.zip |
[PATCH] mipsnet: Virtual ethernet driver for MIPSsim.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
drivers/net/Kconfig | 8 +
drivers/net/Makefile | 1
drivers/net/mipsnet.c | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/mipsnet.h | 127 +++++++++++++++++
4 files changed, 507 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/Kconfig | 8 | ||||
-rw-r--r-- | drivers/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/mipsnet.c | 371 | ||||
-rw-r--r-- | drivers/net/mipsnet.h | 127 |
4 files changed, 507 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0a30368d2efc..5148d47492a0 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -475,6 +475,14 @@ config SGI_IOC3_ETH_HW_TX_CSUM the moment only acceleration of IPv4 is supported. This option enables offloading for checksums on transmit. If unsure, say Y. +config MIPS_SIM_NET + tristate "MIPS simulator Network device (EXPERIMENTAL)" + depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL + help + The MIPSNET device is a simple Ethernet network device which is + emulated by the MIPS Simulator. + If you are not using a MIPSsim or are unsure, say N. + config SGI_O2MACE_ETH tristate "SGI O2 MACE Fast Ethernet support" depends on NET_ETHERNET && SGI_IP32=y diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 4c9477cb2127..1a84e0435f64 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -167,6 +167,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o obj-$(CONFIG_MIPS_GT96100ETH) += gt96100eth.o obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o +obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o obj-$(CONFIG_DECLANCE) += declance.o obj-$(CONFIG_ATARILANCE) += atarilance.o diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c new file mode 100644 index 000000000000..f79f7ee72ab8 --- /dev/null +++ b/drivers/net/mipsnet.c @@ -0,0 +1,371 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define DEBUG + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/sched.h> +#include <linux/etherdevice.h> +#include <linux/netdevice.h> +#include <asm/io.h> +#include <asm/mips-boards/simint.h> + +#include "mipsnet.h" /* actual device IO mapping */ + +#define MIPSNET_VERSION "2005-06-20" + +#define mipsnet_reg_address(dev, field) (dev->base_addr + field_offset(field)) + +struct mipsnet_priv { + struct net_device_stats stats; +}; + +static struct platform_device *mips_plat_dev; + +static char mipsnet_string[] = "mipsnet"; + +/* + * Copy data from the MIPSNET rx data port + */ +static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata, + int len) +{ + uint32_t available_len = inl(mipsnet_reg_address(dev, rxDataCount)); + if (available_len < len) + return -EFAULT; + + for (; len > 0; len--, kdata++) { + *kdata = inb(mipsnet_reg_address(dev, rxDataBuffer)); + } + + return inl(mipsnet_reg_address(dev, rxDataCount)); +} + +static inline ssize_t mipsnet_put_todevice(struct net_device *dev, + struct sk_buff *skb) +{ + int count_to_go = skb->len; + char *buf_ptr = skb->data; + struct mipsnet_priv *mp = netdev_priv(dev); + + pr_debug("%s: %s(): telling MIPSNET txDataCount(%d)\n", + dev->name, __FUNCTION__, skb->len); + + outl(skb->len, mipsnet_reg_address(dev, txDataCount)); + + pr_debug("%s: %s(): sending data to MIPSNET txDataBuffer(%d)\n", + dev->name, __FUNCTION__, skb->len); + + for (; count_to_go; buf_ptr++, count_to_go--) { + outb(*buf_ptr, mipsnet_reg_address(dev, txDataBuffer)); + } + + mp->stats.tx_packets++; + mp->stats.tx_bytes += skb->len; + + return skb->len; +} + +static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev) +{ + pr_debug("%s:%s(): transmitting %d bytes\n", + dev->name, __FUNCTION__, skb->len); + + /* Only one packet at a time. Once TXDONE interrupt is serviced, the + * queue will be restarted. + */ + netif_stop_queue(dev); + mipsnet_put_todevice(dev, skb); + + return 0; +} + +static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t count) +{ + struct sk_buff *skb; + size_t len = count; + struct mipsnet_priv *mp = netdev_priv(dev); + + if (!(skb = alloc_skb(len + 2, GFP_KERNEL))) { + mp->stats.rx_dropped++; + return -ENOMEM; + } + + skb_reserve(skb, 2); + if (ioiocpy_frommipsnet(dev, skb_put(skb, len), len)) + return -EFAULT; + + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + pr_debug("%s:%s(): pushing RXed data to kernel\n", + dev->name, __FUNCTION__); + netif_rx(skb); + + mp->stats.rx_packets++; + mp->stats.rx_bytes += len; + + return count; +} + +static irqreturn_t +mipsnet_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + + irqreturn_t retval = IRQ_NONE; + uint64_t interruptFlags; + + if (irq == dev->irq) { + pr_debug("%s:%s(): irq %d for device\n", + dev->name, __FUNCTION__, irq); + + retval = IRQ_HANDLED; + + interruptFlags = + inl(mipsnet_reg_address(dev, interruptControl)); + pr_debug("%s:%s(): intCtl=0x%016llx\n", dev->name, + __FUNCTION__, interruptFlags); + + if (interruptFlags & MIPSNET_INTCTL_TXDONE) { + pr_debug("%s:%s(): got TXDone\n", + dev->name, __FUNCTION__); + outl(MIPSNET_INTCTL_TXDONE, + mipsnet_reg_address(dev, interruptControl)); + // only one packet at a time, we are done. + netif_wake_queue(dev); + } else if (interruptFlags & MIPSNET_INTCTL_RXDONE) { + pr_debug("%s:%s(): got RX data\n", + dev->name, __FUNCTION__); + mipsnet_get_fromdev(dev, + inl(mipsnet_reg_address(dev, rxDataCount))); + pr_debug("%s:%s(): clearing RX int\n", + dev->name, __FUNCTION__); + outl(MIPSNET_INTCTL_RXDONE, + mipsnet_reg_address(dev, interruptControl)); + + } else if (interruptFlags & MIPSNET_INTCTL_TESTBIT) { + pr_debug("%s:%s(): got test interrupt\n", + dev->name, __FUNCTION__); + // TESTBIT is cleared on read. + // And takes effect after a write with 0 + outl(0, mipsnet_reg_address(dev, interruptControl)); + } else { + pr_debug("%s:%s(): no valid fags 0x%016llx\n", + dev->name, __FUNCTION__, interruptFlags); + // Maybe shared IRQ, just ignore, no clearing. + retval = IRQ_NONE; + } + + } else { + printk(KERN_INFO "%s: %s(): irq %d for unknown device\n", + dev->name, __FUNCTION__, irq); + retval = IRQ_NONE; + } + return retval; +} //mipsnet_interrupt() + +static int mipsnet_open(struct net_device *dev) +{ + int err; + pr_debug("%s: mipsnet_open\n", dev->name); + + err = request_irq(dev->irq, &mipsnet_interrupt, + SA_SHIRQ, dev->name, (void *) dev); + + if (err) { + pr_debug("%s: %s(): can't get irq %d\n", + dev->name, __FUNCTION__, dev->irq); + release_region(dev->base_addr, MIPSNET_IO_EXTENT); + return err; + } + + pr_debug("%s: %s(): got IO region at 0x%04lx and irq %d for dev.\n", + dev->name, __FUNCTION__, dev->base_addr, dev->irq); + + + netif_start_queue(dev); + + // test interrupt handler + outl(MIPSNET_INTCTL_TESTBIT, + mipsnet_reg_address(dev, interruptControl)); + + + return 0; +} + +static int mipsnet_close(struct net_device *dev) +{ + pr_debug("%s: %s()\n", dev->name, __FUNCTION__); + netif_stop_queue(dev); + return 0; +} + +static struct net_device_stats *mipsnet_get_stats(struct net_device *dev) +{ + struct mipsnet_priv *mp = netdev_priv(dev); + + return &mp->stats; +} + +static void mipsnet_set_mclist(struct net_device *dev) +{ + // we don't do anything + return; +} + +static int __init mipsnet_probe(struct device *dev) +{ + struct net_device *netdev; + int err; + + netdev = alloc_etherdev(sizeof(struct mipsnet_priv)); + if (!netdev) { + err = -ENOMEM; + goto out; + } + + dev_set_drvdata(dev, netdev); + + netdev->open = mipsnet_open; + netdev->stop = mipsnet_close; + netdev->hard_start_xmit = mipsnet_xmit; + netdev->get_stats = mipsnet_get_stats; + netdev->set_multicast_list = mipsnet_set_mclist; + + /* + * TODO: probe for these or load them from PARAM + */ + netdev->base_addr = 0x4200; + netdev->irq = MIPSCPU_INT_BASE + MIPSCPU_INT_MB0 + + inl(mipsnet_reg_address(netdev, interruptInfo)); + + // Get the io region now, get irq on open() + if (!request_region(netdev->base_addr, MIPSNET_IO_EXTENT, "mipsnet")) { + pr_debug("%s: %s(): IO region {start: 0x%04lux, len: %d} " + "for dev is not availble.\n", netdev->name, + __FUNCTION__, netdev->base_addr, MIPSNET_IO_EXTENT); + err = -EBUSY; + goto out_free_netdev; + } + + /* + * Lacking any better mechanism to allocate a MAC address we use a + * random one ... + */ + random_ether_addr(netdev->dev_addr); + + err = register_netdev(netdev); + if (err) { + printk(KERN_ERR "MIPSNet: failed to register netdev.\n"); + goto out_free_region; + } + + return 0; + +out_free_region: + release_region(netdev->base_addr, MIPSNET_IO_EXTENT); + +out_free_netdev: + free_netdev(netdev); + +out: + return err; +} + +static int __devexit mipsnet_device_remove(struct device *device) +{ + struct net_device *dev = dev_get_drvdata(device); + + unregister_netdev(dev); + release_region(dev->base_addr, MIPSNET_IO_EXTENT); + free_netdev(dev); + dev_set_drvdata(device, NULL); + + return 0; +} + +static struct device_driver mipsnet_driver = { + .name = mipsnet_string, + .bus = &platform_bus_type, + .probe = mipsnet_probe, + .remove = __devexit_p(mipsnet_device_remove), +}; + +static void mipsnet_platform_release(struct device *device) +{ + struct platform_device *pldev; + + /* free device */ + pldev = to_platform_device(device); + kfree(pldev); +} + +static int __init mipsnet_init_module(void) +{ + struct platform_device *pldev; + int err; + + printk(KERN_INFO "MIPSNet Ethernet driver. Version: %s. " + "(c)2005 MIPS Technologies, Inc.\n", MIPSNET_VERSION); + + if (driver_register(&mipsnet_driver)) { + printk(KERN_ERR "Driver registration failed\n"); + err = -ENODEV; + goto out; + } + + if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL))) { + err = -ENOMEM; + goto out_unregister_driver; + } + + memset (pldev, 0, sizeof (*pldev)); + pldev->name = mipsnet_string; + pldev->id = 0; + pldev->dev.release = mipsnet_platform_release; + + if (platform_device_register(pldev)) { + err = -ENODEV; + goto out_free_pldev; + } + + if (!pldev->dev.driver) { + /* + * The driver was not bound to this device, there was + * no hardware at this address. Unregister it, as the + * release fuction will take care of freeing the + * allocated structure + */ + platform_device_unregister (pldev); + } + + mips_plat_dev = pldev; + + return 0; + +out_free_pldev: + kfree(pldev); + +out_unregister_driver: + driver_unregister(&mipsnet_driver); +out: + return err; +} + +static void __exit mipsnet_exit_module(void) +{ + pr_debug("MIPSNet Ethernet driver exiting\n"); + + driver_unregister(&mipsnet_driver); +} + +module_init(mipsnet_init_module); +module_exit(mipsnet_exit_module); diff --git a/drivers/net/mipsnet.h b/drivers/net/mipsnet.h new file mode 100644 index 000000000000..878535953cb1 --- /dev/null +++ b/drivers/net/mipsnet.h @@ -0,0 +1,127 @@ +// +// <COPYRIGHT CLASS="1B" YEAR="2005"> +// Unpublished work (c) MIPS Technologies, Inc. All rights reserved. +// Unpublished rights reserved under the copyright laws of the U.S.A. and +// other countries. +// +// PROPRIETARY / SECRET CONFIDENTIAL INFORMATION OF MIPS TECHNOLOGIES, INC. +// FOR INTERNAL USE ONLY. +// +// Under no circumstances (contract or otherwise) may this information be +// disclosed to, or copied, modified or used by anyone other than employees +// or contractors of MIPS Technologies having a need to know. +// </COPYRIGHT> +// +//++ +// File: MIPS_Net.h +// +// Description: +// The definition of the emulated MIPSNET device's interface. +// +// Notes: This include file needs to work from a Linux device drivers. +// +//-- +// + +#ifndef __MIPSNET_H +#define __MIPSNET_H + +/* + * Id of this Net device, as seen by the core. + */ +#define MIPS_NET_DEV_ID ((uint64_t) \ + ((uint64_t)'M'<< 0)| \ + ((uint64_t)'I'<< 8)| \ + ((uint64_t)'P'<<16)| \ + ((uint64_t)'S'<<24)| \ + ((uint64_t)'N'<<32)| \ + ((uint64_t)'E'<<40)| \ + ((uint64_t)'T'<<48)| \ + ((uint64_t)'0'<<56)) + +/* + * Net status/control block as seen by sw in the core. + * (Why not use bit fields? can't be bothered with cross-platform struct + * packing.) + */ +typedef struct _net_control_block { + /// dev info for probing + /// reads as MIPSNET%d where %d is some form of version + uint64_t devId; /*0x00 */ + + /* + * read only busy flag. + * Set and cleared by the Net Device to indicate that an rx or a tx + * is in progress. + */ + uint32_t busy; /*0x08 */ + + /* + * Set by the Net Device. + * The device will set it once data has been received. + * The value is the number of bytes that should be read from + * rxDataBuffer. The value will decrease till 0 until all the data + * from rxDataBuffer has been read. + */ + uint32_t rxDataCount; /*0x0c */ +#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16) + + /* + * Settable from the MIPS core, cleared by the Net Device. + * The core should set the number of bytes it wants to send, + * then it should write those bytes of data to txDataBuffer. + * The device will clear txDataCount has been processed (not necessarily sent). + */ + uint32_t txDataCount; /*0x10 */ + + /* + * Interrupt control + * + * Used to clear the interrupted generated by this dev. + * Write a 1 to clear the interrupt. (except bit31). + * + * Bit0 is set if it was a tx-done interrupt. + * Bit1 is set when new rx-data is available. + * Until this bit is cleared there will be no other RXs. + * + * Bit31 is used for testing, it clears after a read. + * Writing 1 to this bit will cause an interrupt to be generated. + * To clear the test interrupt, write 0 to this register. + */ + uint32_t interruptControl; /*0x14 */ +#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0)) +#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1)) +#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31)) +#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT) + + /* + * Readonly core-specific interrupt info for the device to signal the core. + * The meaning of the contents of this field might change. + */ + /*###\todo: the whole memIntf interrupt scheme is messy: the device should have + * no control what so ever of what VPE/register set is being used. + * The MemIntf should only expose interrupt lines, and something in the + * config should be responsible for the line<->core/vpe bindings. + */ + uint32_t interruptInfo; /*0x18 */ + + /* + * This is where the received data is read out. + * There is more data to read until rxDataReady is 0. + * Only 1 byte at this regs offset is used. + */ + uint32_t rxDataBuffer; /*0x1c */ + + /* + * This is where the data to transmit is written. + * Data should be written for the amount specified in the txDataCount register. + * Only 1 byte at this regs offset is used. + */ + uint32_t txDataBuffer; /*0x20 */ +} MIPS_T_NetControl; + +#define MIPSNET_IO_EXTENT 0x40 /* being generous */ + +#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field) + +#endif /* __MIPSNET_H */ |