pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device

pcmcia_enable_device() now replaces pcmcia_request_configuration().
Instead of config_req_t, all necessary flags are either passed as
a parameter to pcmcia_enable_device(), or (in rare circumstances)
set in struct pcmcia_device -> flags.

With the last remaining user of include/pcmcia/cs.h gone, remove
all references.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

19 files changed, 53 insertions, 106 deletions

diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 4b670b3da378..8abce76367f8 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -87,7 +87,6 @@ earlier 3Com products.
 #include <linux/bitops.h>
 #include <linux/mii.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -280,7 +279,7 @@ static int tc574_probe(struct pcmcia_device *link)
 	spin_lock_init(&lp->window_lock);
 	link->resource[0]->end = 32;
 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
-	link->conf.Attributes = CONF_ENABLE_IRQ;
+	link->config_flags |= CONF_ENABLE_IRQ;
 	link->config_index = 1;
 
 	dev->netdev_ops = &el3_netdev_ops;
@@ -351,7 +350,7 @@ static int tc574_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 6549e2c496a0..34195c407fb2 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -41,7 +41,6 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -216,7 +215,7 @@ static int tc589_probe(struct pcmcia_device *link)
     link->resource[0]->end = 16;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 
-    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->config_flags |= CONF_ENABLE_IRQ;
     link->config_index = 1;
 
     dev->netdev_ops = &el3_netdev_ops;
@@ -293,7 +292,7 @@ static int tc589_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 2c273ce6a5d8..f361d2865e34 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -39,7 +39,6 @@
 #include <linux/mii.h>
 #include "../8390.h"
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -166,7 +165,7 @@ static int axnet_probe(struct pcmcia_device *link)
     info = PRIV(dev);
     info->p_dev = link;
     link->priv = dev;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->config_flags |= CONF_ENABLE_IRQ;
 
     dev->netdev_ops = &axnet_netdev_ops;
 
@@ -332,11 +331,12 @@ static int axnet_config(struct pcmcia_device *link)
 
     if (!link->irq)
 	    goto failed;
-    
+
+    link->config_flags |= CONF_ENABLE_IRQ;
     if (resource_size(link->resource[1]) == 8)
-	link->conf.Attributes |= CONF_ENABLE_SPKR;
+	link->config_flags |= CONF_ENABLE_SPKR;
     
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index a58eafed42a5..039731bddc27 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -43,7 +43,6 @@
 #include <linux/arcdevice.h>
 #include <linux/com20020.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -160,7 +159,7 @@ static int com20020_probe(struct pcmcia_device *p_dev)
 
     p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
     p_dev->resource[0]->end = 16;
-    p_dev->conf.Attributes = CONF_ENABLE_IRQ;
+    p_dev->config_flags |= CONF_ENABLE_IRQ;
 
     info->dev = dev;
     p_dev->priv = info;
@@ -281,7 +280,7 @@ static int com20020_config(struct pcmcia_device *link)
 
     dev->irq = link->irq;
 
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 23f5333d8029..f6865adb126d 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -49,7 +49,6 @@
 #include <linux/ioport.h>
 #include <linux/crc32.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -252,7 +251,7 @@ static int fmvj18x_probe(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
     /* General socket configuration */
-    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->config_flags |= CONF_ENABLE_IRQ;
 
     dev->netdev_ops = &fjn_netdev_ops;
     dev->watchdog_timeo = TX_TIMEOUT;
@@ -431,7 +430,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
     ret = pcmcia_request_irq(link, fjn_interrupt);
     if (ret)
 	    goto failed;
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index feedeeb17a52..b298a3d98dc8 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -57,7 +57,6 @@
 #include <linux/trdevice.h>
 #include <linux/ibmtr.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -152,7 +151,7 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
 
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[0]->end = 4;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->config_flags |= CONF_ENABLE_IRQ;
     link->config_regs = PRESENT_OPTION;
 
     info->dev = dev;
@@ -269,7 +268,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
 		    resource_size(link->resource[3]));
     ti->sram_phys = link->resource[3]->start;
 
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 98c4a6976045..51bf76de6499 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -146,7 +146,6 @@ Include Files
 #include <linux/ioport.h>
 #include <linux/bitops.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -460,7 +459,7 @@ static int nmclan_probe(struct pcmcia_device *link)
     spin_lock_init(&lp->bank_lock);
     link->resource[0]->end = 32;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->config_flags |= CONF_ENABLE_IRQ;
     link->config_index = 1;
     link->config_regs = PRESENT_OPTION;
 
@@ -649,7 +648,7 @@ static int nmclan_config(struct pcmcia_device *link)
   ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
   if (ret)
 	  goto failed;
-  ret = pcmcia_request_configuration(link, &link->conf);
+  ret = pcmcia_enable_device(link);
   if (ret)
 	  goto failed;
 
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 68c46751f84f..4a3b6a43550f 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -42,7 +42,6 @@
 #include <linux/mii.h>
 #include "../8390.h"
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -260,7 +259,7 @@ static int pcnet_probe(struct pcmcia_device *link)
     info->p_dev = link;
     link->priv = dev;
 
-    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->config_flags |= CONF_ENABLE_IRQ;
 
     dev->netdev_ops = &pcnet_netdev_ops;
 
@@ -560,13 +559,13 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
 		return NULL;
 
 	if (resource_size(link->resource[1]) == 8)
-		link->conf.Attributes |= CONF_ENABLE_SPKR;
+		link->config_flags |= CONF_ENABLE_SPKR;
 
 	if ((link->manf_id == MANFID_IBM) &&
 	    (link->card_id == PRODID_IBM_HOME_AND_AWAY))
 		link->config_index |= 0x10;
 
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		return NULL;
 
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 59f5034e8d93..8c16ba672012 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -44,7 +44,6 @@
 #include <linux/jiffies.h>
 #include <linux/firmware.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -326,7 +325,7 @@ static int smc91c92_probe(struct pcmcia_device *link)
     spin_lock_init(&smc->lock);
     link->resource[0]->end = 16;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->config_flags |= CONF_ENABLE_IRQ;
 
     /* The SMC91c92-specific entries in the device structure. */
     dev->netdev_ops = &smc_netdev_ops;
@@ -444,7 +443,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
     unsigned int offset;
     int i;
 
-    link->conf.Attributes |= CONF_ENABLE_SPKR;
+    link->config_flags |= CONF_ENABLE_SPKR;
     link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[1]->end = 8;
 
@@ -637,7 +636,7 @@ static int osi_config(struct pcmcia_device *link)
     static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
     int i, j;
 
-    link->conf.Attributes |= CONF_ENABLE_SPKR;
+    link->config_flags |= CONF_ENABLE_SPKR;
     link->resource[0]->end = 64;
     link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[1]->end = 8;
@@ -862,7 +861,7 @@ static int smc91c92_config(struct pcmcia_device *link)
     i = pcmcia_request_irq(link, smc_interrupt);
     if (i)
 	    goto config_failed;
-    i = pcmcia_request_configuration(link, &link->conf);
+    i = pcmcia_enable_device(link);
     if (i)
 	    goto config_failed;
 
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 1c8ebf2df0c0..7a4a99b73d17 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -82,7 +82,6 @@
 #include <linux/bitops.h>
 #include <linux/mii.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -529,7 +528,7 @@ xirc2ps_probe(struct pcmcia_device *link)
     link->priv = dev;
 
     /* General socket configuration */
-    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->config_flags |= CONF_ENABLE_IRQ;
     link->config_index = 1;
 
     /* Fill in card specific entries */
@@ -811,9 +810,6 @@ xirc2ps_config(struct pcmcia_device * link)
     if (local->modem) {
 	int pass;
 
-	if (do_sound)
-	    link->conf.Attributes |= CONF_ENABLE_SPKR;
-
 	link->resource[1]->end = 8;
 	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	if (local->dingo) {
@@ -863,7 +859,11 @@ xirc2ps_config(struct pcmcia_device * link)
      * This actually configures the PCMCIA socket -- setting up
      * the I/O windows and the interrupt mapping.
      */
-    if ((err=pcmcia_request_configuration(link, &link->conf)))
+    link->config_flags |= CONF_ENABLE_IRQ;
+    if (do_sound)
+	    link->config_flags |= CONF_ENABLE_SPKR;
+
+    if ((err = pcmcia_enable_device(link)))
 	goto config_error;
 
     if (local->dingo) {
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 40f9ed760bb3..5939d0c7a5c8 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -32,7 +32,6 @@
 #include <linux/timer.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -96,15 +95,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
 
 	dev_dbg(&p_dev->dev, "airo_attach()\n");
 
-	/*
-	  General socket configuration defaults can go here.  In this
-	  client, we assume very little, and rely on the CIS for almost
-	  everything.  In most clients, many details (i.e., number, sizes,
-	  and attributes of IO windows) are fixed by the nature of the
-	  device, and can be hard-wired here.
-	*/
-	p_dev->conf.Attributes = 0;
-
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
 	if (!local) {
@@ -158,7 +148,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->config_flags |= CONF_ENABLE_SPKR;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
@@ -167,7 +157,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -229,7 +219,7 @@ static int airo_config(struct pcmcia_device *link)
 	  the I/O windows and the interrupt mapping, and putting the
 	  card and host interface into "Memory and IO" mode.
 	*/
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 8b75158caed7..080266eba985 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -42,7 +42,6 @@
 #include <linux/moduleparam.h>
 #include <linux/device.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -106,15 +105,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 
 	dev_dbg(&p_dev->dev, "atmel_attach()\n");
 
-	/*
-	  General socket configuration defaults can go here.  In this
-	  client, we assume very little, and rely on the CIS for almost
-	  everything.  In most clients, many details (i.e., number, sizes,
-	  and attributes of IO windows) are fixed by the nature of the
-	  device, and can be hard-wired here.
-	*/
-	p_dev->conf.Attributes = 0;
-
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
 	if (!local) {
@@ -175,7 +165,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->config_flags |= CONF_ENABLE_SPKR;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
@@ -184,7 +174,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -242,7 +232,7 @@ static int atmel_config(struct pcmcia_device *link)
 	  the I/O windows and the interrupt mapping, and putting the
 	  card and host interface into "Memory and IO" mode.
 	*/
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 138b26fcc75c..61abab1f1c7c 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -26,7 +26,6 @@
 #include <linux/ssb/ssb.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -72,7 +71,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 
 	err = -ENODEV;
 
-	dev->conf.Attributes = CONF_ENABLE_IRQ;
+	dev->config_flags |= CONF_ENABLE_IRQ;
 
 	dev->resource[2]->flags |=  WIN_ENABLE | WIN_DATA_WIDTH_16 |
 			 WIN_USE_WAIT;
@@ -89,7 +88,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	if (!dev->irq)
 		goto err_disable;
 
-	res = pcmcia_request_configuration(dev, &dev->conf);
+	res = pcmcia_enable_device(dev);
 	if (res != 0)
 		goto err_disable;
 
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 5704d3f9e1b7..5b0b5828b3cf 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -12,7 +12,6 @@
 #include <linux/wireless.h>
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -484,7 +483,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->config_flags |= CONF_ENABLE_SPKR;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
@@ -510,7 +509,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 		p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
@@ -590,7 +589,7 @@ static int prism2_config(struct pcmcia_device *link)
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed_unlock;
 
@@ -605,8 +604,7 @@ static int prism2_config(struct pcmcia_device *link)
 	if (link->vpp)
 		printk(", Vpp %d.%d", link->vpp / 10,
 		       link->vpp % 10);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq);
+	printk(", irq %d", link->irq);
 	if (link->resource[0])
 		printk(" & %pR", link->resource[0]);
 	if (link->resource[1])
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 814b7faaa365..6020c19b1bdb 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -28,7 +28,6 @@
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -806,7 +805,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
 	p_dev->resource[0]->end = cfg->io.win[0].len;
 
 	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	if (cfg->io.nwin != 1) {
@@ -835,14 +834,11 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	card->p_dev = p_dev;
 	p_dev->priv = card;
 
-	p_dev->conf.Attributes = 0;
-
 	if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
 		lbs_pr_err("error in pcmcia_loop_config\n");
 		goto out1;
 	}
 
-
 	/*
 	 * Allocate an interrupt line.  Note that this does not assign
 	 * a handler to the interrupt, unless the 'Handler' member of
@@ -865,9 +861,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
+	ret = pcmcia_enable_device(p_dev);
 	if (ret) {
-		lbs_pr_err("error in pcmcia_request_configuration\n");
+		lbs_pr_err("error in pcmcia_enable_device\n");
 		goto out2;
 	}
 
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 1147d6bd4733..00316a1a1092 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -117,13 +116,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* General socket configuration defaults can go here.  In this
-	 * client, we assume very little, and rely on the CIS for
-	 * almost everything.  In most clients, many details (i.e.,
-	 * number, sizes, and attributes of IO windows) are fixed by
-	 * the nature of the device, and can be hard-wired here. */
-	link->conf.Attributes = 0;
-
 	return orinoco_cs_config(link);
 }				/* orinoco_cs_attach */
 
@@ -187,7 +179,7 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -266,7 +258,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 20b08ab87655..ca2c6c0c5576 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -25,7 +25,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -179,13 +178,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* General socket configuration defaults can go here.  In this
-	 * client, we assume very little, and rely on the CIS for
-	 * almost everything.  In most clients, many details (i.e.,
-	 * number, sizes, and attributes of IO windows) are fixed by
-	 * the nature of the device, and can be hard-wired here. */
-	link->conf.Attributes = 0;
-
 	return spectrum_cs_config(link);
 }				/* spectrum_cs_attach */
 
@@ -249,7 +241,7 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -329,7 +321,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 7fb66cc1e9fd..1457f34efa9a 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -46,7 +46,6 @@
 #include <linux/ethtool.h>
 #include <linux/ieee80211.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -318,7 +317,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
-	p_dev->conf.Attributes = CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 	p_dev->config_index = 1;
 
 	p_dev->priv = dev;
@@ -413,7 +412,7 @@ static int ray_config(struct pcmcia_device *link)
 	/* This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 3947cf8e63c5..101b6ffd560e 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
 
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -1888,7 +1887,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	p_dev->resource[0]->flags	= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
-	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
+	p_dev->config_flags	= CONF_ENABLE_IRQ;
 	p_dev->config_index	= 1;
 
 	dev = alloc_etherdev(sizeof(struct wl3501_card));
@@ -1954,7 +1953,7 @@ static int wl3501_config(struct pcmcia_device *link)
 	/* This actually configures the PCMCIA socket -- setting up the I/O
 	 * windows and the interrupt mapping.  */
 
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;