tree-wide: fix comment/printk typos

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

30 files changed, 39 insertions, 39 deletions

diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index e9ad16f00b56..4a6f0eac8b12 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -4947,7 +4947,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
 		memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
 		memset(&ilt, 0, sizeof(struct bnx2x_ilt));
 
-		/* initalize dummy TM client */
+		/* initialize dummy TM client */
 		ilt_cli.start = 0;
 		ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
 		ilt_cli.client_num = ILT_CLIENT_TM;
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 1cefe489a955..245220af9feb 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1604,7 +1604,7 @@
    (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
 #define MISC_REG_SW_TIMER_RELOAD_VAL_4				 0xa2fc
 /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
-   in this register. addres 0 - timer 1; address 1 - timer 2, ...  address 7 -
+   in this register. address 0 - timer 1; address 1 - timer 2, ...  address 7 -
    timer 8 */
 #define MISC_REG_SW_TIMER_VAL					 0xa5c0
 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 881914bc4e9c..106718c1be5b 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -840,7 +840,7 @@ static int ad_lacpdu_send(struct port *port)
 	lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
 
 	memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
-	/* Note: source addres is set to be the member's PERMANENT address,
+	/* Note: source address is set to be the member's PERMANENT address,
 	   because we use it to identify loopback lacpdus in receive. */
 	memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
 	lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -881,7 +881,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
 	marker_header = (struct bond_marker_header *)skb_put(skb, length);
 
 	memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
-	/* Note: source addres is set to be the member's PERMANENT address,
+	/* Note: source address is set to be the member's PERMANENT address,
 	   because we use it to identify loopback MARKERs in receive. */
 	memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
 	marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -1916,7 +1916,7 @@ int bond_3ad_bind_slave(struct slave *slave)
 		return -1;
 	}
 
-	//check that the slave has not been intialized yet.
+	//check that the slave has not been initialized yet.
 	if (SLAVE_AD_INFO(slave).port.slave != slave) {
 
 		// port initialization
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 63ebf76d2390..8a43c7e19701 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -556,7 +556,7 @@ struct chelsio_vpd_t {
 #define EEPROM_MAX_POLL   4
 
 /*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
  * written to the Control register. The hardware device will set the flag to a
  * one when 4B have been transferred to the Data register.
  */
diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c
index a8766fb2f9ab..e13b7fe9d082 100644
--- a/drivers/net/cxgb3/mc5.c
+++ b/drivers/net/cxgb3/mc5.c
@@ -318,7 +318,7 @@ static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
 
 /*
  * Initialization that requires the OS and protocol layers to already
- * be intialized goes here.
+ * be initialized goes here.
  */
 int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
 		unsigned int nroutes)
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 3a6adf0b3e9d..0b197043bc34 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -607,7 +607,7 @@ struct t3_vpd {
  *
  *	Read a 32-bit word from a location in VPD EEPROM using the card's PCI
  *	VPD ROM capability.  A zero is written to the flag bit when the
- *	addres is written to the control register.  The hardware device will
+ *	address is written to the control register.  The hardware device will
  *	set the flag to 1 when 4 bytes have been read into the data register.
  */
 int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data)
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index ecd9f6c6bcd5..5e820f4e68b9 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -41,7 +41,7 @@ struct e1000_hw;
 struct e1000_hw_stats;
 
 /* Enumerated types specific to the e1000 hardware */
-/* Media Access Controlers */
+/* Media Access Controllers */
 typedef enum {
 	e1000_undefined = 0,
 	e1000_82542_rev2_0,
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4686c3983fc3..1b8a43a29c01 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2194,7 +2194,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 	 * addresses take precedence to avoid disabling unicast filtering
 	 * when possible.
 	 *
-	 * RAR 0 is used for the station MAC adddress
+	 * RAR 0 is used for the station MAC address
 	 * if there are not 14 addresses, go ahead and clear the filters
 	 */
 	i = 1;
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 7236f1a53ba0..a655beb69320 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -300,7 +300,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 
 	/*
 	 * Ensure that the inter-port SWSM.SMBI lock bit is clear before
-	 * first NVM or PHY acess. This should be done for single-port
+	 * first NVM or PHY access. This should be done for single-port
 	 * devices, and for one port only on dual-port devices so that
 	 * for those devices we can still use the SMBI lock to synchronize
 	 * inter-port accesses to the PHY & NVM.
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index e3374d9a2472..38c84ba3e3c1 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -321,7 +321,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	}
 
 	/*
-	 * Reset the PHY before any acccess to it.  Doing so, ensures that
+	 * Reset the PHY before any access to it.  Doing so, ensures that
 	 * the PHY is in a known good state before we read/write PHY registers.
 	 * The generic reset is sufficient here, because we haven't determined
 	 * the PHY type yet.
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 3d3dc0c82355..b9bff5ba009f 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2976,7 +2976,7 @@ s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
 }
 
 /**
- *  e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
+ *  e1000_get_phy_addr_for_hv_page - Get PHY address based on page
  *  @page: page to be accessed
  **/
 static u32 e1000_get_phy_addr_for_hv_page(u32 page)
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 7c826319ee5a..dbaec546c428 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1760,7 +1760,7 @@ module_param_array(io, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
 module_param_array(mem, int, NULL, 0);
 module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
 MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
 MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
 MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 4dc39e5f0156..77fcf4459161 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -30,7 +30,7 @@
  *     or the type-DO IR port.
  *
  * IrDA chip set list from Toshiba Computer Engineering Corp.
- * model			method	maker	controler		Version 
+ * model			method	maker	controller		Version 
  * Portege 320CT	FIR,SIR Toshiba Oboe(Triangle) 
  * Portege 3010CT	FIR,SIR Toshiba Oboe(Sydney) 
  * Portege 3015CT	FIR,SIR Toshiba Oboe(Sydney) 
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 0bd8fbb5bfd0..05e6b8cafb39 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1078,7 +1078,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
 
 	/*
 	 * The defaults in the HW for RX PB 1-7 are not zero and so should be
-	 * intialized to zero for non DCB mode otherwise actual total RX PB
+	 * initialized to zero for non DCB mode otherwise actual total RX PB
 	 * would be bigger than programmed and filter space would run into
 	 * the PB 0 region.
 	 */
@@ -1169,7 +1169,7 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
 
 	/*
 	 * The defaults in the HW for RX PB 1-7 are not zero and so should be
-	 * intialized to zero for non DCB mode otherwise actual total RX PB
+	 * initialized to zero for non DCB mode otherwise actual total RX PB
 	 * would be bigger than programmed and filter space would run into
 	 * the PB 0 region.
 	 */
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 9f8e7027b0b3..661ed1ff4c2e 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -238,7 +238,7 @@ static int temac_dma_bd_init(struct net_device *ndev)
 		goto out;
 	}
 	/* allocate the tx and rx ring buffer descriptors. */
-	/* returns a virtual addres and a physical address. */
+	/* returns a virtual address and a physical address. */
 	lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
 					 sizeof(*lp->tx_bd_v) * TX_BD_NUM,
 					 &lp->tx_bd_p, GFP_KERNEL);
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 581836867098..5976d1d51df1 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -36,7 +36,7 @@
    Rev 1.07.06 Nov.  7 2000 Jeff Garzik <jgarzik@pobox.com> some bug fix and cleaning
    Rev 1.07.05 Nov.  6 2000 metapirat<metapirat@gmx.de> contribute media type select by ifconfig
    Rev 1.07.04 Sep.  6 2000 Lei-Chun Chang added ICS1893 PHY support
-   Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E eqaulizer workaround rule
+   Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule
    Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1
    Rev 1.07    Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring
    Rev 1.06.04 Feb. 11 2000 Jeff Garzik <jgarzik@pobox.com> softnet and init for kernel 2.4
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 8b3dc1eb4015..474652a2f70d 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -12,7 +12,7 @@
 /*
  * RX HW/SW interaction overview
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * There are 2 types of RX communication channels betwean driver and NIC.
+ * There are 2 types of RX communication channels between driver and NIC.
  * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming
  * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds
  * info about buffer's location, size and ID. An ID field is used to identify a
@@ -821,7 +821,7 @@ static void bdx_setmulti(struct net_device *ndev)
 		}
 
 		/* use PMF to accept first MAC_MCST_NUM (15) addresses */
-		/* TBD: sort addreses and write them in ascending order
+		/* TBD: sort addresses and write them in ascending order
 		 * into RX_MAC_MCST regs. we skip this phase now and accept ALL
 		 * multicast frames throu IMF */
 		/* accept the rest of addresses throu IMF */
@@ -1346,7 +1346,7 @@ static void print_rxfd(struct rxf_desc *rxfd)
 /*
  * TX HW/SW interaction overview
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * There are 2 types of TX communication channels betwean driver and NIC.
+ * There are 2 types of TX communication channels between driver and NIC.
  * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets
  * 2) TX Data Fifo - TXD - holds descriptors of full buffers.
  *
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 55f3a3e667a9..e625f9530cf9 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1309,7 +1309,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case SIOCGIFHWADDR:
-		/* Get hw addres */
+		/* Get hw address */
 		memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
 		ifr.ifr_hwaddr.sa_family = tun->dev->type;
 		if (copy_to_user(argp, &ifr, ifreq_len))
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 9890d4d596d0..654295816a39 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -1695,7 +1695,7 @@ struct vxge_hw_device_stats_sw_err {
  * struct vxge_hw_device_stats - Contains HW per-device statistics,
  * including hw.
  * @devh: HW device handle.
- * @dma_addr: DMA addres of the %hw_info. Given to device to fill-in the stats.
+ * @dma_addr: DMA address of the %hw_info. Given to device to fill-in the stats.
  * @hw_info_dmah: DMA handle used to map hw statistics onto the device memory
  *                space.
  * @hw_info_dma_acch: One more DMA handle used subsequently to free the
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index d45b08d1dbc9..94ff9b02e28e 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -125,7 +125,7 @@ static u32 dscc4_pci_config_store[16];
 /* Module parameters */
 
 MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>");
-MODULE_DESCRIPTION("Siemens PEB20534 PCI Controler");
+MODULE_DESCRIPTION("Siemens PEB20534 PCI Controller");
 MODULE_LICENSE("GPL");
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug,"Enable/disable extra messages");
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index cdedab46ba21..bcb483fdc4d9 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -280,7 +280,7 @@ int i2400m_check_mac_addr(struct i2400m *i2400m)
 			result);
 		goto error;
 	}
-	/* Extract MAC addresss */
+	/* Extract MAC address */
 	ddi = (void *) skb->data;
 	BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address));
 	d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n",
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 59ac7705e76e..8cde3a52d225 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -698,7 +698,7 @@ enum i2400m_bm_cmd_flags {
  * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
  *     rom after reading the MAC address. This is quite a dirty hack,
  *     if you ask me -- the device requires the bootrom to be
- *     intialized after reading the MAC address.
+ *     initialized after reading the MAC address.
  */
 enum i2400m_bri {
 	I2400M_BRI_SOFT       = 1 << 1,
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index ca79ecd832fd..2a246d13b520 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1063,7 +1063,7 @@
 /*
  * EEPROM command register
  */
-#define AR5K_EEPROM_CMD		0x6008			/* Register Addres */
+#define AR5K_EEPROM_CMD		0x6008			/* Register Address */
 #define AR5K_EEPROM_CMD_READ	0x00000001	/* EEPROM read */
 #define AR5K_EEPROM_CMD_WRITE	0x00000002	/* EEPROM write */
 #define AR5K_EEPROM_CMD_RESET	0x00000004	/* EEPROM reset */
@@ -1083,7 +1083,7 @@
 /*
  * EEPROM config register
  */
-#define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
+#define AR5K_EEPROM_CFG			0x6010			/* Register Address */
 #define AR5K_EEPROM_CFG_SIZE		0x00000003		/* Size determination override */
 #define AR5K_EEPROM_CFG_SIZE_AUTO	0
 #define AR5K_EEPROM_CFG_SIZE_4KBIT	1
@@ -1125,7 +1125,7 @@
  * Second station id register (Upper 16 bits of MAC address + PCU settings)
  */
 #define AR5K_STA_ID1			0x8004			/* Register Address */
-#define	AR5K_STA_ID1_ADDR_U16		0x0000ffff	/* Upper 16 bits of MAC addres */
+#define	AR5K_STA_ID1_ADDR_U16		0x0000ffff	/* Upper 16 bits of MAC address */
 #define AR5K_STA_ID1_AP			0x00010000	/* Set AP mode */
 #define AR5K_STA_ID1_ADHOC		0x00020000	/* Set Ad-Hoc mode */
 #define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting */
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 0dc33b65e86b..be4828167012 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -1919,7 +1919,7 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev)
 	b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL);
 }
 
-/* Intialize B/G PHY power control */
+/* Initialize B/G PHY power control */
 static void b43_phy_init_pctl(struct b43_wldev *dev)
 {
 	struct ssb_bus *bus = dev->dev->bus;
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index 35033dd342ce..28e477d01587 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -153,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev)
 	phy->calibrated = 1;
 }
 
-/* intialize B PHY power control
+/* initialize B PHY power control
  * as described in http://bcm-specs.sipsolutions.net/InitPowerControl
  */
 static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev)
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 7c7f7dcb1b1e..972b738c0e4a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -107,7 +107,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv,
 	/*
 	 * XXX: The MAC address in the command buffer is often changed from
 	 * the original sent to the device. That is, the MAC address
-	 * written to the command buffer often is not the same MAC adress
+	 * written to the command buffer often is not the same MAC address
 	 * read from the command buffer when the command returns. This
 	 * issue has not yet been resolved and this debugging is left to
 	 * observe the problem.
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 2c8cc954d1b6..ec2c75d77cea 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -630,7 +630,7 @@ islpci_alloc_memory(islpci_private *priv)
 	printk(KERN_DEBUG "islpci_alloc_memory\n");
 #endif
 
-	/* remap the PCI device base address to accessable */
+	/* remap the PCI device base address to accessible */
 	if (!(priv->device_base =
 	      ioremap(pci_resource_start(priv->pdev, 0),
 		      ISL38XX_PCI_MEM_SIZE))) {
@@ -709,7 +709,7 @@ islpci_alloc_memory(islpci_private *priv)
 				   PCI_DMA_FROMDEVICE);
 		if (!priv->pci_map_rx_address[counter]) {
 			/* error mapping the buffer to device
-			   accessable memory address */
+			   accessible memory address */
 			printk(KERN_ERR "failed to map skb DMA'able\n");
 			goto out_free;
 		}
@@ -773,7 +773,7 @@ islpci_free_memory(islpci_private *priv)
 		priv->data_low_rx[counter] = NULL;
 	}
 
-	/* Free the acces control list and the WPA list */
+	/* Free the access control list and the WPA list */
 	prism54_acl_clean(&priv->acl);
 	prism54_wpa_bss_ie_clean(priv);
 	mgt_clean(priv);
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 2fc52bc2d7dd..d44f8e20cce0 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -450,7 +450,7 @@ islpci_eth_receive(islpci_private *priv)
 				   MAX_FRAGMENT_SIZE_RX + 2,
 				   PCI_DMA_FROMDEVICE);
 		if (unlikely(!priv->pci_map_rx_address[index])) {
-			/* error mapping the buffer to device accessable memory address */
+			/* error mapping the buffer to device accessible memory address */
 			DEBUG(SHOW_ERROR_MESSAGES,
 			      "Error mapping DMA address\n");
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c3c206a97d54..a7d3f4c3ee0d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -274,7 +274,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	intf->beacon = entry;
 
 	/*
-	 * The MAC adddress must be configured after the device
+	 * The MAC address must be configured after the device
 	 * has been initialized. Otherwise the device can reset
 	 * the MAC registers.
 	 * The BSSID address must only be configured in AP mode,
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index ee82df62e646..3e5befe4d03b 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -192,7 +192,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
 }
 
 /*
- * Get Ethernet MAC addresss.
+ * Get Ethernet MAC address.
  *
  * WARNING: We switch to FPAGE0 and switc back again.
  *          Making sure there is no other WL function beening called by ISR.