diff options
| author | Bruce Allan <bruce.w.allan@intel.com> | 2010-09-22 19:15:08 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-09-23 05:41:18 +0200 |
| commit | 8395ae8303255b31a8625035fc98391c88b0c257 (patch) | |
| tree | 176950114d1368f87949026d626690031e85628f /drivers/net | |
| parent | xfrm4: strip ECN bits from tos field (diff) | |
| download | linux-8395ae8303255b31a8625035fc98391c88b0c257.tar.xz linux-8395ae8303255b31a8625035fc98391c88b0c257.zip | |
e1000e: 82577/8/9 issues with device in Sx
When going to Sx, disable gigabit in PHY (e1000_oem_bits_config_ich8lan)
in addition to the MAC before configuring PHY wakeup otherwise the PHY
configuration writes might be missed. Also write the LED configuration
and SMBus address to the PHY registers (e1000_oem_bits_config_ich8lan and
e1000_write_smbus_addr, respectively). The reset is no longer needed
since re-auto-negotiation is forced in e1000_oem_bits_config_ich8lan and
leaving it in causes issues with auto-negotiating the link.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 47 |
1 files changed, 39 insertions, 8 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 63930d12711c..822de4830c67 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -125,6 +125,7 @@ /* SMBus Address Phy Register */ #define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_MASK 0x007F #define HV_SMB_ADDR_PEC_EN 0x0200 #define HV_SMB_ADDR_VALID 0x0080 @@ -895,6 +896,34 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) } /** + * e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states + * @hw: pointer to the HW structure + * + * Assumes semaphore already acquired. + * + **/ +static s32 e1000_write_smbus_addr(struct e1000_hw *hw) +{ + u16 phy_data; + u32 strap = er32(STRAP); + s32 ret_val = 0; + + strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; + + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data); + if (ret_val) + goto out; + + phy_data &= ~HV_SMB_ADDR_MASK; + phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT); + phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data); + +out: + return ret_val; +} + +/** * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration * @hw: pointer to the HW structure * @@ -970,12 +999,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) * When both NVM bits are cleared, SW will configure * them instead. */ - data = er32(STRAP); - data &= E1000_STRAP_SMBUS_ADDRESS_MASK; - reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; - reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; - ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, - reg_data); + ret_val = e1000_write_smbus_addr(hw); if (ret_val) goto out; @@ -3460,13 +3484,20 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) { u32 phy_ctrl; + s32 ret_val; phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); - if (hw->mac.type >= e1000_pchlan) - e1000_phy_hw_reset_ich8lan(hw); + if (hw->mac.type >= e1000_pchlan) { + e1000_oem_bits_config_ich8lan(hw, true); + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return; + e1000_write_smbus_addr(hw); + hw->phy.ops.release(hw); + } } /** |