Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "SoC specific code is generally used for older platforms that don't
  (yet) use device tree to do the same things.

   - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
     from NXP. At the moment this is still incomplete as other portions
     are merged through different trees.

   - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
     gets removed, now the Arm NOMMU platforms are limited to the
     Cortex-M family of microcontrollers

   - Two old PXA boards get removed, along with corresponding driver
     bits.

   - Continued cleanup of the Intel IXP4xx platforms, removing some
     remnants of the old board files.

   - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung

   - CPU idle support for AT91

   - A system controller driver for Polarfire"

* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: remove support for NOMMU ARMv4/v5
  ARM: PXA: fix up decompressor code
  soc: microchip: make mpfs_sys_controller_put static
  ARM: pxa: remove Intel Imote2 and Stargate 2 boards
  ARM: mmp: Fix failure to remove sram device
  ARM: mstar: Select ARM_ERRATA_814220
  soc: add microchip polarfire soc system controller
  ARM: at91: Kconfig: select PM_OPP
  ARM: at91: PM: add cpu idle support for sama7g5
  ARM: at91: ddr: fix typo to align with datasheet naming
  ARM: at91: ddr: align macro definitions
  ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
  ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
  ARM: ixp4xx: Drop all common code
  ARM: ixp4xx: Drop custom DMA coherency and bouncing
  ARM: ixp4xx: Remove feature bit accessors
  net: ixp4xx_hss: Check features using syscon
  net: ixp4xx_eth: Drop platform data support
  soc: ixp4xx-npe: Access syscon regs using regmap
  soc: ixp4xx: Add features from regmap helper
  ...

5 files changed, 45 insertions, 87 deletions

diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index 0e878fa6e322..b33f64c54b0e 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -20,9 +20,9 @@ if NET_VENDOR_XSCALE
 
 config IXP4XX_ETH
 	tristate "Intel IXP4xx Ethernet support"
-	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR && OF
 	select PHYLIB
-	select OF_MDIO if OF
+	select OF_MDIO
 	select NET_PTP_CLASSIFY
 	help
 	  Say Y here if you want to use built-in Ethernet ports
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index df77a22d1b81..d947955621ee 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -30,7 +30,6 @@
 #include <linux/of.h>
 #include <linux/of_mdio.h>
 #include <linux/phy.h>
-#include <linux/platform_data/eth_ixp4xx.h>
 #include <linux/platform_device.h>
 #include <linux/ptp_classify.h>
 #include <linux/slab.h>
@@ -38,6 +37,11 @@
 #include <linux/soc/ixp4xx/npe.h>
 #include <linux/soc/ixp4xx/qmgr.h>
 #include <linux/soc/ixp4xx/cpu.h>
+#include <linux/types.h>
+
+#define IXP4XX_ETH_NPEA		0x00
+#define IXP4XX_ETH_NPEB		0x10
+#define IXP4XX_ETH_NPEC		0x20
 
 #include "ixp46x_ts.h"
 
@@ -147,6 +151,16 @@ typedef void buffer_t;
 #define free_buffer_irq kfree
 #endif
 
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+	u8 phy;		/* MII PHY ID, 0 - 31 */
+	u8 rxq;		/* configurable, currently 0 - 31 only */
+	u8 txreadyq;
+	u8 hwaddr[6];
+	u8 npe;		/* NPE instance used by this interface */
+	bool has_mdio;	/* If this instance has an MDIO bus */
+};
+
 struct eth_regs {
 	u32 tx_control[2], __res1[2];		/* 000 */
 	u32 rx_control[2], __res2[2];		/* 010 */
@@ -1366,7 +1380,6 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
 	.ndo_validate_addr = eth_validate_addr,
 };
 
-#ifdef CONFIG_OF
 static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
 {
 	struct device_node *np = dev->of_node;
@@ -1417,12 +1430,6 @@ static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
 
 	return plat;
 }
-#else
-static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
-{
-	return NULL;
-}
-#endif
 
 static int ixp4xx_eth_probe(struct platform_device *pdev)
 {
@@ -1434,49 +1441,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
 	struct port *port;
 	int err;
 
-	if (np) {
-		plat = ixp4xx_of_get_platdata(dev);
-		if (!plat)
-			return -ENODEV;
-	} else {
-		plat = dev_get_platdata(dev);
-		if (!plat)
-			return -ENODEV;
-		plat->npe = pdev->id;
-		switch (plat->npe) {
-		case IXP4XX_ETH_NPEA:
-			/* If the MDIO bus is not up yet, defer probe */
-			break;
-		case IXP4XX_ETH_NPEB:
-			/* On all except IXP43x, NPE-B is used for the MDIO bus.
-			 * If there is no NPE-B in the feature set, bail out,
-			 * else we have the MDIO bus here.
-			 */
-			if (!cpu_is_ixp43x()) {
-				if (!(ixp4xx_read_feature_bits() &
-				      IXP4XX_FEATURE_NPEB_ETH0))
-					return -ENODEV;
-				/* Else register the MDIO bus on NPE-B */
-				plat->has_mdio = true;
-			}
-			break;
-		case IXP4XX_ETH_NPEC:
-			/* IXP43x lacks NPE-B and uses NPE-C for the MDIO bus
-			 * access, if there is no NPE-C, no bus, nothing works,
-			 * so bail out.
-			 */
-			if (cpu_is_ixp43x()) {
-				if (!(ixp4xx_read_feature_bits() &
-				      IXP4XX_FEATURE_NPEC_ETH))
-					return -ENODEV;
-				/* Else register the MDIO bus on NPE-B */
-				plat->has_mdio = true;
-			}
-			break;
-		default:
-			return -ENODEV;
-		}
-	}
+	plat = ixp4xx_of_get_platdata(dev);
+	if (!plat)
+		return -ENODEV;
 
 	if (!(ndev = devm_alloc_etherdev(dev, sizeof(struct port))))
 		return -ENOMEM;
@@ -1530,21 +1497,7 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
 	udelay(50);
 
-	if (np) {
-		phydev = of_phy_get_and_connect(ndev, np, ixp4xx_adjust_link);
-	} else {
-		phydev = mdiobus_get_phy(mdio_bus, plat->phy);
-		if (!phydev) {
-			err = -ENODEV;
-			dev_err(dev, "could not connect phydev (%d)\n", err);
-			goto err_free_mem;
-		}
-		err = phy_connect_direct(ndev, phydev, ixp4xx_adjust_link,
-					 PHY_INTERFACE_MODE_MII);
-		if (err)
-			goto err_free_mem;
-
-	}
+	phydev = of_phy_get_and_connect(ndev, np, ixp4xx_adjust_link);
 	if (!phydev) {
 		err = -ENODEV;
 		dev_err(dev, "no phydev\n");
diff --git a/drivers/net/ethernet/xscale/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c
index 39234852e01b..1f382777aa5a 100644
--- a/drivers/net/ethernet/xscale/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -16,7 +16,6 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/platform_device.h>
 #include <linux/soc/ixp4xx/cpu.h>
-#include <mach/ixp4xx-regs.h>
 
 #include "ixp46x_ts.h"
 
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 592a8389fc5a..140780ac1745 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -293,7 +293,8 @@ config SLIC_DS26522
 config IXP4XX_HSS
 	tristate "Intel IXP4xx HSS (synchronous serial port) support"
 	depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
-	depends on ARCH_IXP4XX
+	depends on ARCH_IXP4XX && OF
+	select MFD_SYSCON
 	help
 	  Say Y here if you want to use built-in HSS ports
 	  on IXP4xx processor.
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 0b7d9f2f2b8b..863c3e34e136 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -16,8 +16,10 @@
 #include <linux/hdlc.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/poll.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/gpio/consumer.h>
 #include <linux/of.h>
@@ -1389,9 +1391,28 @@ static int ixp4xx_hss_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct net_device *ndev;
 	struct device_node *np;
+	struct regmap *rmap;
 	struct port *port;
 	hdlc_device *hdlc;
 	int err;
+	u32 val;
+
+	/*
+	 * Go into the syscon and check if we have the HSS and HDLC
+	 * features available, else this will not work.
+	 */
+	rmap = syscon_regmap_lookup_by_compatible("syscon");
+	if (IS_ERR(rmap))
+		return dev_err_probe(dev, PTR_ERR(rmap),
+				     "failed to look up syscon\n");
+
+	val = cpu_ixp4xx_features(rmap);
+
+	if ((val & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
+	    (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) {
+		dev_err(dev, "HDLC and HSS feature unavailable in platform\n");
+		return -ENODEV;
+	}
 
 	np = dev->of_node;
 
@@ -1516,25 +1537,9 @@ static struct platform_driver ixp4xx_hss_driver = {
 	.probe		= ixp4xx_hss_probe,
 	.remove		= ixp4xx_hss_remove,
 };
-
-static int __init hss_init_module(void)
-{
-	if ((ixp4xx_read_feature_bits() &
-	     (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
-	    (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
-		return -ENODEV;
-
-	return platform_driver_register(&ixp4xx_hss_driver);
-}
-
-static void __exit hss_cleanup_module(void)
-{
-	platform_driver_unregister(&ixp4xx_hss_driver);
-}
+module_platform_driver(ixp4xx_hss_driver);
 
 MODULE_AUTHOR("Krzysztof Halasa");
 MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:ixp4xx_hss");
-module_init(hss_init_module);
-module_exit(hss_cleanup_module);