Merge tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.21

 *) Change phy set_mode ops to take both mode and setmode as arguments
 *) Add phy_configure() and phy_validate() API's mostly used for MIPI D-PHY
 *) Add helpers to get default values of parameters define in MIPI D-PHY spec
 *) Add driver for TI's CPSW Port PHY Interface Mode selection
 *) Add driver for Cadence Sierra PHY used with USB and PCIe
 *) Add driver for Freescale i.MX8MQ USB3 PHY
 *) Fixes QMP PHY bindings to allow the clocks provided by the PHY to be
    pointed at in device tree
 *) Fix for using fully specified regions (in device tree) for configuring
    the second lane in dual lane PHYs in QMP PHY
 *) Add support for Allwinner H6 USB2 PHY in phy-sun4i-usb driver
 *) Update phy-rcar-gen3-usb driver to follow the hardware manual
 *) Add support for fine grained power management in mapphone-mdm6600 driver

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (30 commits)
  phy: qcom-qmp: Expose provided clocks to DT
  dt-bindings: phy-qcom-qmp: Move #clock-cells to child
  phy: qcom-qmp: Utilize fully-specified DT registers
  dt-bindings: phy-qcom-qmp: Fix register underspecification
  phy: ti: fix semicolon.cocci warnings
  phy: dphy: Add configuration helpers
  phy: Add MIPI D-PHY configuration options
  phy: Add configuration interface
  phy: Add MIPI D-PHY mode
  phy: add driver for Freescale i.MX8MQ USB3 PHY
  dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY
  phy: Use of_node_name_eq for node name comparisons
  net: ethernet: ti: cpsw: add support for port interface mode selection phy
  dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy
  phy: ti: introduce phy-gmii-sel driver
  dt-bindings: phy: add cpsw port interface mode selection phy bindings
  phy: mvebu-cp110-comphy: fix spelling in structure name
  phy: mapphone-mdm6600: Improve phy related runtime PM calls
  phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure
  phy: cadence: Add driver for Sierra PHY
  ...

3 files changed, 22 insertions, 25 deletions

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 125ea99418df..4551ec134494 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1165,28 +1165,13 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port)
  */
 static int mvpp22_comphy_init(struct mvpp2_port *port)
 {
-	enum phy_mode mode;
 	int ret;
 
 	if (!port->comphy)
 		return 0;
 
-	switch (port->phy_interface) {
-	case PHY_INTERFACE_MODE_SGMII:
-	case PHY_INTERFACE_MODE_1000BASEX:
-		mode = PHY_MODE_SGMII;
-		break;
-	case PHY_INTERFACE_MODE_2500BASEX:
-		mode = PHY_MODE_2500SGMII;
-		break;
-	case PHY_INTERFACE_MODE_10GKR:
-		mode = PHY_MODE_10GKR;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = phy_set_mode(port->comphy, mode);
+	ret = phy_set_mode_ext(port->comphy, PHY_MODE_ETHERNET,
+			       port->phy_interface);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 3238b9ee42f3..3edb6082c670 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -472,7 +472,6 @@ static int ocelot_port_open(struct net_device *dev)
 {
 	struct ocelot_port *port = netdev_priv(dev);
 	struct ocelot *ocelot = port->ocelot;
-	enum phy_mode phy_mode;
 	int err;
 
 	/* Enable receiving frames on the port, and activate auto-learning of
@@ -484,12 +483,8 @@ static int ocelot_port_open(struct net_device *dev)
 			 ANA_PORT_PORT_CFG, port->chip_port);
 
 	if (port->serdes) {
-		if (port->phy_mode == PHY_INTERFACE_MODE_SGMII)
-			phy_mode = PHY_MODE_SGMII;
-		else
-			phy_mode = PHY_MODE_QSGMII;
-
-		err = phy_set_mode(port->serdes, phy_mode);
+		err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET,
+				       port->phy_mode);
 		if (err) {
 			netdev_err(dev, "Could not set mode of SerDes\n");
 			return err;
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 500f7ed8c58c..94e5e5b791ec 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -26,6 +26,7 @@
 #include <linux/netdevice.h>
 #include <linux/net_tstamp.h>
 #include <linux/phy.h>
+#include <linux/phy/phy.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
@@ -387,6 +388,7 @@ struct cpsw_slave_data {
 	int		phy_if;
 	u8		mac_addr[ETH_ALEN];
 	u16		dual_emac_res_vlan;	/* Reserved VLAN for DualEMAC */
+	struct phy	*ifphy;
 };
 
 struct cpsw_platform_data {
@@ -1510,7 +1512,12 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 	phy_start(slave->phy);
 
 	/* Configure GMII_SEL register */
-	cpsw_phy_sel(cpsw->dev, slave->phy->interface, slave->slave_num);
+	if (!IS_ERR(slave->data->ifphy))
+		phy_set_mode_ext(slave->data->ifphy, PHY_MODE_ETHERNET,
+				 slave->data->phy_if);
+	else
+		cpsw_phy_sel(cpsw->dev, slave->phy->interface,
+			     slave->slave_num);
 }
 
 static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)
@@ -3147,6 +3154,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		if (strcmp(slave_node->name, "slave"))
 			continue;
 
+		slave_data->ifphy = devm_of_phy_get(&pdev->dev, slave_node,
+						    NULL);
+		if (!IS_ENABLED(CONFIG_TI_CPSW_PHY_SEL) &&
+		    IS_ERR(slave_data->ifphy)) {
+			ret = PTR_ERR(slave_data->ifphy);
+			dev_err(&pdev->dev,
+				"%d: Error retrieving port phy: %d\n", i, ret);
+			return ret;
+		}
+
 		slave_data->phy_node = of_parse_phandle(slave_node,
 							"phy-handle", 0);
 		parp = of_get_property(slave_node, "phy_id", &lenp);