net/wan: dscc4: remove broken dscc4 driver

Using static analysis, I discovered that the "dpriv->pci_priv->pdev"
pointer is always NULL.  This pointer was supposed to be initialized
during probe and is essential for the driver to work.  It would be easy
to add a "ppriv->pdev = pdev;" to dscc4_found1() but this driver has
been broken since before we started using git and no one has complained
so probably we should just remove it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 0 insertions, 2072 deletions

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 09fdd619ac67..dd1a147f2971 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -267,20 +267,6 @@ config FARSYNC
 	  To compile this driver as a module, choose M here: the
 	  module will be called farsync.
 
-config DSCC4
-	tristate "Etinc PCISYNC serial board support"
-	depends on HDLC && PCI && m
-	help
-	  Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
-	  DSCC4 chipset.
-
-	  This is supposed to work with the four port card. Take a look at
-	  <http://www.cogenit.fr/dscc4/> for further information about the
-	  driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dscc4.
-
 config FSL_UCC_HDLC
 	tristate "Freescale QUICC Engine HDLC support"
 	depends on HDLC
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 9532e69fda87..701f5d2fe3b6 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
 obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
 obj-$(CONFIG_COSA)		+= cosa.o
 obj-$(CONFIG_FARSYNC)		+= farsync.o
-obj-$(CONFIG_DSCC4)             += dscc4.o
 obj-$(CONFIG_X25_ASY)		+= x25_asy.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
deleted file mode 100644
index fa78d2b14136..000000000000
--- a/drivers/net/wan/dscc4.c
+++ /dev/null
@@ -1,2057 +0,0 @@
-/*
- * drivers/net/wan/dscc4/dscc4.c: a DSCC4 HDLC driver for Linux
- *
- * This software may be used and distributed according to the terms of the
- * GNU General Public License.
- *
- * The author may be reached as romieu@cogenit.fr.
- * Specific bug reports/asian food will be welcome.
- *
- * Special thanks to the nice people at CS-Telecom for the hardware and the
- * access to the test/measure tools.
- *
- *
- *                             Theory of Operation
- *
- * I. Board Compatibility
- *
- * This device driver is designed for the Siemens PEB20534 4 ports serial
- * controller as found on Etinc PCISYNC cards. The documentation for the
- * chipset is available at http://www.infineon.com:
- * - Data Sheet "DSCC4, DMA Supported Serial Communication Controller with
- * 4 Channels, PEB 20534 Version 2.1, PEF 20534 Version 2.1";
- * - Application Hint "Management of DSCC4 on-chip FIFO resources".
- * - Errata sheet DS5 (courtesy of Michael Skerritt).
- * Jens David has built an adapter based on the same chipset. Take a look
- * at http://www.afthd.tu-darmstadt.de/~dg1kjd/pciscc4 for a specific
- * driver.
- * Sample code (2 revisions) is available at Infineon.
- *
- * II. Board-specific settings
- *
- * Pcisync can transmit some clock signal to the outside world on the
- * *first two* ports provided you put a quartz and a line driver on it and
- * remove the jumpers. The operation is described on Etinc web site. If you
- * go DCE on these ports, don't forget to use an adequate cable.
- *
- * Sharing of the PCI interrupt line for this board is possible.
- *
- * III. Driver operation
- *
- * The rx/tx operations are based on a linked list of descriptors. The driver
- * doesn't use HOLD mode any more. HOLD mode is definitely buggy and the more
- * I tried to fix it, the more it started to look like (convoluted) software
- * mutation of LxDA method. Errata sheet DS5 suggests to use LxDA: consider
- * this a rfc2119 MUST.
- *
- * Tx direction
- * When the tx ring is full, the xmit routine issues a call to netdev_stop.
- * The device is supposed to be enabled again during an ALLS irq (we could
- * use HI but as it's easy to lose events, it's fscked).
- *
- * Rx direction
- * The received frames aren't supposed to span over multiple receiving areas.
- * I may implement it some day but it isn't the highest ranked item.
- *
- * IV. Notes
- * The current error (XDU, RFO) recovery code is untested.
- * So far, RDO takes his RX channel down and the right sequence to enable it
- * again is still a mystery. If RDO happens, plan a reboot. More details
- * in the code (NB: as this happens, TX still works).
- * Don't mess the cables during operation, especially on DTE ports. I don't
- * suggest it for DCE either but at least one can get some messages instead
- * of a complete instant freeze.
- * Tests are done on Rev. 20 of the silicium. The RDO handling changes with
- * the documentation/chipset releases.
- *
- * TODO:
- * - test X25.
- * - use polling at high irq/s,
- * - performance analysis,
- * - endianness.
- *
- * 2001/12/10	Daniela Squassoni  <daniela@cyclades.com>
- * - Contribution to support the new generic HDLC layer.
- *
- * 2002/01	Ueimor
- * - old style interface removal
- * - dscc4_release_ring fix (related to DMA mapping)
- * - hard_start_xmit fix (hint: TxSizeMax)
- * - misc crapectomy.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/cache.h>
-#include <asm/byteorder.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-
-#include <linux/if_arp.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/hdlc.h>
-#include <linux/mutex.h>
-
-/* Version */
-static const char version[] = "$Id: dscc4.c,v 1.173 2003/09/20 23:55:34 romieu Exp $ for Linux\n";
-static int debug;
-static int quartz;
-
-#ifdef CONFIG_DSCC4_PCI_RST
-static DEFINE_MUTEX(dscc4_mutex);
-static u32 dscc4_pci_config_store[16];
-#endif
-
-#define	DRV_NAME	"dscc4"
-
-#undef DSCC4_POLLING
-
-/* Module parameters */
-
-MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>");
-MODULE_DESCRIPTION("Siemens PEB20534 PCI Controller");
-MODULE_LICENSE("GPL");
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug,"Enable/disable extra messages");
-module_param(quartz, int, 0);
-MODULE_PARM_DESC(quartz,"If present, on-board quartz frequency (Hz)");
-
-/* Structures */
-
-struct thingie {
-	int define;
-	u32 bits;
-};
-
-struct TxFD {
-	__le32 state;
-	__le32 next;
-	__le32 data;
-	__le32 complete;
-	u32 jiffies; /* Allows sizeof(TxFD) == sizeof(RxFD) + extra hack */
-		     /* FWIW, datasheet calls that "dummy" and says that card
-		      * never looks at it; neither does the driver */
-};
-
-struct RxFD {
-	__le32 state1;
-	__le32 next;
-	__le32 data;
-	__le32 state2;
-	__le32 end;
-};
-
-#define DUMMY_SKB_SIZE		64
-#define TX_LOW			8
-#define TX_RING_SIZE		32
-#define RX_RING_SIZE		32
-#define TX_TOTAL_SIZE		TX_RING_SIZE*sizeof(struct TxFD)
-#define RX_TOTAL_SIZE		RX_RING_SIZE*sizeof(struct RxFD)
-#define IRQ_RING_SIZE		64		/* Keep it a multiple of 32 */
-#define TX_TIMEOUT		(HZ/10)
-#define DSCC4_HZ_MAX		33000000
-#define BRR_DIVIDER_MAX		64*0x00004000	/* Cf errata DS5 p.10 */
-#define dev_per_card		4
-#define SCC_REGISTERS_MAX	23		/* Cf errata DS5 p.4 */
-
-#define SOURCE_ID(flags)	(((flags) >> 28) & 0x03)
-#define TO_SIZE(state)		(((state) >> 16) & 0x1fff)
-
-/*
- * Given the operating range of Linux HDLC, the 2 defines below could be
- * made simpler. However they are a fine reminder for the limitations of
- * the driver: it's better to stay < TxSizeMax and < RxSizeMax.
- */
-#define TO_STATE_TX(len)	cpu_to_le32(((len) & TxSizeMax) << 16)
-#define TO_STATE_RX(len)	cpu_to_le32((RX_MAX(len) % RxSizeMax) << 16)
-#define RX_MAX(len)		((((len) >> 5) + 1) << 5)	/* Cf RLCR */
-#define SCC_REG_START(dpriv)	(SCC_START+(dpriv->dev_id)*SCC_OFFSET)
-
-struct dscc4_pci_priv {
-        __le32 *iqcfg;
-        int cfg_cur;
-        spinlock_t lock;
-        struct pci_dev *pdev;
-
-        struct dscc4_dev_priv *root;
-        dma_addr_t iqcfg_dma;
-	u32 xtal_hz;
-};
-
-struct dscc4_dev_priv {
-        struct sk_buff *rx_skbuff[RX_RING_SIZE];
-        struct sk_buff *tx_skbuff[TX_RING_SIZE];
-
-        struct RxFD *rx_fd;
-        struct TxFD *tx_fd;
-        __le32 *iqrx;
-        __le32 *iqtx;
-
-	/* FIXME: check all the volatile are required */
-        volatile u32 tx_current;
-        u32 rx_current;
-        u32 iqtx_current;
-        u32 iqrx_current;
-
-        volatile u32 tx_dirty;
-        volatile u32 ltda;
-        u32 rx_dirty;
-        u32 lrda;
-
-        dma_addr_t tx_fd_dma;
-        dma_addr_t rx_fd_dma;
-        dma_addr_t iqtx_dma;
-        dma_addr_t iqrx_dma;
-
-	u32 scc_regs[SCC_REGISTERS_MAX]; /* Cf errata DS5 p.4 */
-
-        struct dscc4_pci_priv *pci_priv;
-        spinlock_t lock;
-
-        int dev_id;
-	volatile u32 flags;
-	u32 timer_help;
-
-	unsigned short encoding;
-	unsigned short parity;
-	struct net_device *dev;
-	sync_serial_settings settings;
-	void __iomem *base_addr;
-	u32 __pad __attribute__ ((aligned (4)));
-};
-
-/* GLOBAL registers definitions */
-#define GCMDR   0x00
-#define GSTAR   0x04
-#define GMODE   0x08
-#define IQLENR0 0x0C
-#define IQLENR1 0x10
-#define IQRX0   0x14
-#define IQTX0   0x24
-#define IQCFG   0x3c
-#define FIFOCR1 0x44
-#define FIFOCR2 0x48
-#define FIFOCR3 0x4c
-#define FIFOCR4 0x34
-#define CH0CFG  0x50
-#define CH0BRDA 0x54
-#define CH0BTDA 0x58
-#define CH0FRDA 0x98
-#define CH0FTDA 0xb0
-#define CH0LRDA 0xc8
-#define CH0LTDA 0xe0
-
-/* SCC registers definitions */
-#define SCC_START	0x0100
-#define SCC_OFFSET      0x80
-#define CMDR    0x00
-#define STAR    0x04
-#define CCR0    0x08
-#define CCR1    0x0c
-#define CCR2    0x10
-#define BRR     0x2C
-#define RLCR    0x40
-#define IMR     0x54
-#define ISR     0x58
-
-#define GPDIR	0x0400
-#define GPDATA	0x0404
-#define GPIM	0x0408
-
-/* Bit masks */
-#define EncodingMask	0x00700000
-#define CrcMask		0x00000003
-
-#define IntRxScc0	0x10000000
-#define IntTxScc0	0x01000000
-
-#define TxPollCmd	0x00000400
-#define RxActivate	0x08000000
-#define MTFi		0x04000000
-#define Rdr		0x00400000
-#define Rdt		0x00200000
-#define Idr		0x00100000
-#define Idt		0x00080000
-#define TxSccRes	0x01000000
-#define RxSccRes	0x00010000
-#define TxSizeMax	0x1fff		/* Datasheet DS1 - 11.1.1.1 */
-#define RxSizeMax	0x1ffc		/* Datasheet DS1 - 11.1.2.1 */
-
-#define Ccr0ClockMask	0x0000003f
-#define Ccr1LoopMask	0x00000200
-#define IsrMask		0x000fffff
-#define BrrExpMask	0x00000f00
-#define BrrMultMask	0x0000003f
-#define EncodingMask	0x00700000
-#define Hold		cpu_to_le32(0x40000000)
-#define SccBusy		0x10000000
-#define PowerUp		0x80000000
-#define Vis		0x00001000
-#define FrameOk		(FrameVfr | FrameCrc)
-#define FrameVfr	0x80
-#define FrameRdo	0x40
-#define FrameCrc	0x20
-#define FrameRab	0x10
-#define FrameAborted	cpu_to_le32(0x00000200)
-#define FrameEnd	cpu_to_le32(0x80000000)
-#define DataComplete	cpu_to_le32(0x40000000)
-#define LengthCheck	0x00008000
-#define SccEvt		0x02000000
-#define NoAck		0x00000200
-#define Action		0x00000001
-#define HiDesc		cpu_to_le32(0x20000000)
-
-/* SCC events */
-#define RxEvt		0xf0000000
-#define TxEvt		0x0f000000
-#define Alls		0x00040000
-#define Xdu		0x00010000
-#define Cts		0x00004000
-#define Xmr		0x00002000
-#define Xpr		0x00001000
-#define Rdo		0x00000080
-#define Rfs		0x00000040
-#define Cd		0x00000004
-#define Rfo		0x00000002
-#define Flex		0x00000001
-
-/* DMA core events */
-#define Cfg		0x00200000
-#define Hi		0x00040000
-#define Fi		0x00020000
-#define Err		0x00010000
-#define Arf		0x00000002
-#define ArAck		0x00000001
-
-/* State flags */
-#define Ready		0x00000000
-#define NeedIDR		0x00000001
-#define NeedIDT		0x00000002
-#define RdoSet		0x00000004
-#define FakeReset	0x00000008
-
-/* Don't mask RDO. Ever. */
-#ifdef DSCC4_POLLING
-#define EventsMask	0xfffeef7f
-#else
-#define EventsMask	0xfffa8f7a
-#endif
-
-/* Functions prototypes */
-static void dscc4_rx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
-static void dscc4_tx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
-static int dscc4_found1(struct pci_dev *, void __iomem *ioaddr);
-static int dscc4_init_one(struct pci_dev *, const struct pci_device_id *ent);
-static int dscc4_open(struct net_device *);
-static netdev_tx_t dscc4_start_xmit(struct sk_buff *,
-					  struct net_device *);
-static int dscc4_close(struct net_device *);
-static int dscc4_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static int dscc4_init_ring(struct net_device *);
-static void dscc4_release_ring(struct dscc4_dev_priv *);
-static void dscc4_tx_timeout(struct net_device *);
-static irqreturn_t dscc4_irq(int irq, void *dev_id);
-static int dscc4_hdlc_attach(struct net_device *, unsigned short, unsigned short);
-static int dscc4_set_iface(struct dscc4_dev_priv *, struct net_device *);
-#ifdef DSCC4_POLLING
-static int dscc4_tx_poll(struct dscc4_dev_priv *, struct net_device *);
-#endif
-
-static inline struct dscc4_dev_priv *dscc4_priv(struct net_device *dev)
-{
-	return dev_to_hdlc(dev)->priv;
-}
-
-static inline struct net_device *dscc4_to_dev(struct dscc4_dev_priv *p)
-{
-	return p->dev;
-}
-
-static void scc_patchl(u32 mask, u32 value, struct dscc4_dev_priv *dpriv,
-			struct net_device *dev, int offset)
-{
-	u32 state;
-
-	/* Cf scc_writel for concern regarding thread-safety */
-	state = dpriv->scc_regs[offset >> 2];
-	state &= ~mask;
-	state |= value;
-	dpriv->scc_regs[offset >> 2] = state;
-	writel(state, dpriv->base_addr + SCC_REG_START(dpriv) + offset);
-}
-
-static void scc_writel(u32 bits, struct dscc4_dev_priv *dpriv,
-		       struct net_device *dev, int offset)
-{
-	/*
-	 * Thread-UNsafe.
-	 * As of 2002/02/16, there are no thread racing for access.
-	 */
-	dpriv->scc_regs[offset >> 2] = bits;
-	writel(bits, dpriv->base_addr + SCC_REG_START(dpriv) + offset);
-}
-
-static inline u32 scc_readl(struct dscc4_dev_priv *dpriv, int offset)
-{
-	return dpriv->scc_regs[offset >> 2];
-}
-
-static u32 scc_readl_star(struct dscc4_dev_priv *dpriv, struct net_device *dev)
-{
-	/* Cf errata DS5 p.4 */
-	readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR);
-	return readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR);
-}
-
-static inline void dscc4_do_tx(struct dscc4_dev_priv *dpriv,
-			       struct net_device *dev)
-{
-	dpriv->ltda = dpriv->tx_fd_dma +
-                      ((dpriv->tx_current-1)%TX_RING_SIZE)*sizeof(struct TxFD);
-	writel(dpriv->ltda, dpriv->base_addr + CH0LTDA + dpriv->dev_id*4);
-	/* Flush posted writes *NOW* */
-	readl(dpriv->base_addr + CH0LTDA + dpriv->dev_id*4);
-}
-
-static inline void dscc4_rx_update(struct dscc4_dev_priv *dpriv,
-				   struct net_device *dev)
-{
-	dpriv->lrda = dpriv->rx_fd_dma +
-		      ((dpriv->rx_dirty - 1)%RX_RING_SIZE)*sizeof(struct RxFD);
-	writel(dpriv->lrda, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
-}
-
-static inline unsigned int dscc4_tx_done(struct dscc4_dev_priv *dpriv)
-{
-	return dpriv->tx_current == dpriv->tx_dirty;
-}
-
-static inline unsigned int dscc4_tx_quiescent(struct dscc4_dev_priv *dpriv,
-					      struct net_device *dev)
-{
-	return readl(dpriv->base_addr + CH0FTDA + dpriv->dev_id*4) == dpriv->ltda;
-}
-
-static int state_check(u32 state, struct dscc4_dev_priv *dpriv,
-		       struct net_device *dev, const char *msg)
-{
-	int ret = 0;
-
-	if (debug > 1) {
-		if (SOURCE_ID(state) != dpriv->dev_id) {
-			printk(KERN_DEBUG "%s (%s): Source Id=%d, state=%08x\n",
-			       dev->name, msg, SOURCE_ID(state), state);
-			ret = -1;
-		}
-		if (state & 0x0df80c00) {
-			printk(KERN_DEBUG "%s (%s): state=%08x (UFO alert)\n",
-			       dev->name, msg, state);
-			ret = -1;
-		}
-	}
-	return ret;
-}
-
-static void dscc4_tx_print(struct net_device *dev,
-			   struct dscc4_dev_priv *dpriv,
-			   char *msg)
-{
-	printk(KERN_DEBUG "%s: tx_current=%02d tx_dirty=%02d (%s)\n",
-	       dev->name, dpriv->tx_current, dpriv->tx_dirty, msg);
-}
-
-static void dscc4_release_ring(struct dscc4_dev_priv *dpriv)
-{
-	struct device *d = &dpriv->pci_priv->pdev->dev;
-	struct TxFD *tx_fd = dpriv->tx_fd;
-	struct RxFD *rx_fd = dpriv->rx_fd;
-	struct sk_buff **skbuff;
-	int i;
-
-	dma_free_coherent(d, TX_TOTAL_SIZE, tx_fd, dpriv->tx_fd_dma);
-	dma_free_coherent(d, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma);
-
-	skbuff = dpriv->tx_skbuff;
-	for (i = 0; i < TX_RING_SIZE; i++) {
-		if (*skbuff) {
-			dma_unmap_single(d, le32_to_cpu(tx_fd->data),
-					 (*skbuff)->len, DMA_TO_DEVICE);
-			dev_kfree_skb(*skbuff);
-		}
-		skbuff++;
-		tx_fd++;
-	}
-
-	skbuff = dpriv->rx_skbuff;
-	for (i = 0; i < RX_RING_SIZE; i++) {
-		if (*skbuff) {
-			dma_unmap_single(d, le32_to_cpu(rx_fd->data),
-					 RX_MAX(HDLC_MAX_MRU),
-					 DMA_FROM_DEVICE);
-			dev_kfree_skb(*skbuff);
-		}
-		skbuff++;
-		rx_fd++;
-	}
-}
-
-static inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv,
-				 struct net_device *dev)
-{
-	unsigned int dirty = dpriv->rx_dirty%RX_RING_SIZE;
-	struct device *d = &dpriv->pci_priv->pdev->dev;
-	struct RxFD *rx_fd = dpriv->rx_fd + dirty;
-	const int len = RX_MAX(HDLC_MAX_MRU);
-	struct sk_buff *skb;
-	dma_addr_t addr;
-
-	skb = dev_alloc_skb(len);
-	if (!skb)
-		goto err_out;
-
-	skb->protocol = hdlc_type_trans(skb, dev);
-	addr = dma_map_single(d, skb->data, len, DMA_FROM_DEVICE);
-	if (dma_mapping_error(d, addr))
-		goto err_free_skb;
-
-	dpriv->rx_skbuff[dirty] = skb;
-	rx_fd->data = cpu_to_le32(addr);
-	return 0;
-
-err_free_skb:
-	dev_kfree_skb_any(skb);
-err_out:
-	rx_fd->data = 0;
-	return -1;
-}
-
-/*
- * IRQ/thread/whatever safe
- */
-static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv,
-			      struct net_device *dev, char *msg)
-{
-	s8 i = 0;
-
-	do {
-		if (!(scc_readl_star(dpriv, dev) & SccBusy)) {
-			printk(KERN_DEBUG "%s: %s ack (%d try)\n", dev->name,
-			       msg, i);
-			goto done;
-		}
-		schedule_timeout_uninterruptible(msecs_to_jiffies(100));
-		rmb();
-	} while (++i > 0);
-	netdev_err(dev, "%s timeout\n", msg);
-done:
-	return (i >= 0) ? i : -EAGAIN;
-}
-
-static int dscc4_do_action(struct net_device *dev, char *msg)
-{
-	void __iomem *ioaddr = dscc4_priv(dev)->base_addr;
-	s16 i = 0;
-
-	writel(Action, ioaddr + GCMDR);
-	ioaddr += GSTAR;
-	do {
-		u32 state = readl(ioaddr);
-
-		if (state & ArAck) {
-			netdev_dbg(dev, "%s ack\n", msg);
-			writel(ArAck, ioaddr);
-			goto done;
-		} else if (state & Arf) {
-			netdev_err(dev, "%s failed\n", msg);
-			writel(Arf, ioaddr);
-			i = -1;
-			goto done;
-	}
-		rmb();
-	} while (++i > 0);
-	netdev_err(dev, "%s timeout\n", msg);
-done:
-	return i;
-}
-
-static inline int dscc4_xpr_ack(struct dscc4_dev_priv *dpriv)
-{
-	int cur = dpriv->iqtx_current%IRQ_RING_SIZE;
-	s8 i = 0;
-
-	do {
-		if (!(dpriv->flags & (NeedIDR | NeedIDT)) ||
-		    (dpriv->iqtx[cur] & cpu_to_le32(Xpr)))
-			break;
-		smp_rmb();
-		schedule_timeout_uninterruptible(msecs_to_jiffies(100));
-	} while (++i > 0);
-
-	return (i >= 0 ) ? i : -EAGAIN;
-}
-
-#if 0 /* dscc4_{rx/tx}_reset are both unreliable - more tweak needed */
-static void dscc4_rx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dpriv->pci_priv->lock, flags);
-	/* Cf errata DS5 p.6 */
-	writel(0x00000000, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
-	scc_patchl(PowerUp, 0, dpriv, dev, CCR0);
-	readl(dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
-	writel(MTFi|Rdr, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
-	writel(Action, dpriv->base_addr + GCMDR);
-	spin_unlock_irqrestore(&dpriv->pci_priv->lock, flags);
-}
-
-#endif
-
-#if 0
-static void dscc4_tx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
-{
-	u16 i = 0;
-
-	/* Cf errata DS5 p.7 */
-	scc_patchl(PowerUp, 0, dpriv, dev, CCR0);
-	scc_writel(0x00050000, dpriv, dev, CCR2);
-	/*
-	 * Must be longer than the time required to fill the fifo.
-	 */
-	while (!dscc4_tx_quiescent(dpriv, dev) && ++i) {
-		udelay(1);
-		wmb();
-	}
-
-	writel(MTFi|Rdt, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
-	if (dscc4_do_action(dev, "Rdt") < 0)
-		netdev_err(dev, "Tx reset failed\n");
-}
-#endif
-
-/* TODO: (ab)use this function to refill a completely depleted RX ring. */
-static inline void dscc4_rx_skb(struct dscc4_dev_priv *dpriv,
-				struct net_device *dev)
-{
-	struct RxFD *rx_fd = dpriv->rx_fd + dpriv->rx_current%RX_RING_SIZE;
-	struct device *d = &dpriv->pci_priv->pdev->dev;
-	struct sk_buff *skb;
-	int pkt_len;
-
-	skb = dpriv->rx_skbuff[dpriv->rx_current++%RX_RING_SIZE];
-	if (!skb) {
-		printk(KERN_DEBUG "%s: skb=0 (%s)\n", dev->name, __func__);
-		goto refill;
-	}
-	pkt_len = TO_SIZE(le32_to_cpu(rx_fd->state2));
-	dma_unmap_single(d, le32_to_cpu(rx_fd->data),
-			 RX_MAX(HDLC_MAX_MRU), DMA_FROM_DEVICE);
-	if ((skb->data[--pkt_len] & FrameOk) == FrameOk) {
-		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += pkt_len;
-		skb_put(skb, pkt_len);
-		if (netif_running(dev))
-			skb->protocol = hdlc_type_trans(skb, dev);
-		netif_rx(skb);
-	} else {
-		if (skb->data[pkt_len] & FrameRdo)
-			dev->stats.rx_fifo_errors++;
-		else if (!(skb->data[pkt_len] & FrameCrc))
-			dev->stats.rx_crc_errors++;
-		else if ((skb->data[pkt_len] & (FrameVfr | FrameRab)) !=
-			 (FrameVfr | FrameRab))
-			dev->stats.rx_length_errors++;
-		dev->stats.rx_errors++;
-		dev_kfree_skb_irq(skb);
-	}
-refill:
-	while ((dpriv->rx_dirty - dpriv->rx_current) % RX_RING_SIZE) {
-		if (try_get_rx_skb(dpriv, dev) < 0)
-			break;
-		dpriv->rx_dirty++;
-	}
-	dscc4_rx_update(dpriv, dev);
-	rx_fd->state2 = 0x00000000;
-	rx_fd->end = cpu_to_le32(0xbabeface);
-}
-
-static void dscc4_free1(struct pci_dev *pdev)
-{
-	struct dscc4_pci_priv *ppriv;
-	struct dscc4_dev_priv *root;
-	int i;
-
-	ppriv = pci_get_drvdata(pdev);
-	root = ppriv->root;
-
-	for (i = 0; i < dev_per_card; i++)
-		unregister_hdlc_device(dscc4_to_dev(root + i));
-
-	for (i = 0; i < dev_per_card; i++)
-		free_netdev(root[i].dev);
-	kfree(root);
-	kfree(ppriv);
-}
-
-static int dscc4_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	struct dscc4_pci_priv *priv;
-	struct dscc4_dev_priv *dpriv;
-	void __iomem *ioaddr;
-	int i, rc;
-
-	printk(KERN_DEBUG "%s", version);
-
-	rc = pci_enable_device(pdev);
-	if (rc < 0)
-		goto out;
-
-	rc = pci_request_region(pdev, 0, "registers");
-	if (rc < 0) {
-		pr_err("can't reserve MMIO region (regs)\n");
-	        goto err_disable_0;
-	}
-	rc = pci_request_region(pdev, 1, "LBI interface");
-	if (rc < 0) {
-		pr_err("can't reserve MMIO region (lbi)\n");
-	        goto err_free_mmio_region_1;
-	}
-
-	ioaddr = pci_ioremap_bar(pdev, 0);
-	if (!ioaddr) {
-		pr_err("cannot remap MMIO region %llx @ %llx\n",
-		       (unsigned long long)pci_resource_len(pdev, 0),
-		       (unsigned long long)pci_resource_start(pdev, 0));
-		rc = -EIO;
-		goto err_free_mmio_regions_2;
-	}
-	printk(KERN_DEBUG "Siemens DSCC4, MMIO at %#llx (regs), %#llx (lbi), IRQ %d\n",
-	        (unsigned long long)pci_resource_start(pdev, 0),
-	        (unsigned long long)pci_resource_start(pdev, 1), pdev->irq);
-
-	/* Cf errata DS5 p.2 */
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xf8);
-	pci_set_master(pdev);
-
-	rc = dscc4_found1(pdev, ioaddr);
-	if (rc < 0)
-	        goto err_iounmap_3;
-
-	priv = pci_get_drvdata(pdev);
-
-	rc = request_irq(pdev->irq, dscc4_irq, IRQF_SHARED, DRV_NAME, priv->root);
-	if (rc < 0) {
-		pr_warn("IRQ %d busy\n", pdev->irq);
-		goto err_release_4;
-	}
-
-	/* power up/little endian/dma core controlled via lrda/ltda */
-	writel(0x00000001, ioaddr + GMODE);
-	/* Shared interrupt queue */
-	{
-		u32 bits;
-
-		bits = (IRQ_RING_SIZE >> 5) - 1;
-		bits |= bits << 4;
-		bits |= bits << 8;
-		bits |= bits << 16;
-		writel(bits, ioaddr + IQLENR0);
-	}
-	/* Global interrupt queue */
-	writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1);
-
-	rc = -ENOMEM;
-
-	priv->iqcfg = (__le32 *)dma_alloc_coherent(&pdev->dev,
-		IRQ_RING_SIZE*sizeof(__le32), &priv->iqcfg_dma, GFP_KERNEL);
-	if (!priv->iqcfg)
-		goto err_free_irq_5;
-	writel(priv->iqcfg_dma, ioaddr + IQCFG);
-
-	/*
-	 * SCC 0-3 private rx/tx irq structures
-	 * IQRX/TXi needs to be set soon. Learned it the hard way...
-	 */
-	for (i = 0; i < dev_per_card; i++) {
-		dpriv = priv->root + i;
-		dpriv->iqtx = (__le32 *)dma_alloc_coherent(&pdev->dev,
-			IRQ_RING_SIZE*sizeof(u32), &dpriv->iqtx_dma,
-			GFP_KERNEL);
-		if (!dpriv->iqtx)
-			goto err_free_iqtx_6;
-		writel(dpriv->iqtx_dma, ioaddr + IQTX0 + i*4);
-	}
-	for (i = 0; i < dev_per_card; i++) {
-		dpriv = priv->root + i;
-		dpriv->iqrx = (__le32 *)dma_alloc_coherent(&pdev->dev,
-			IRQ_RING_SIZE*sizeof(u32), &dpriv->iqrx_dma,
-			GFP_KERNEL);
-		if (!dpriv->iqrx)
-			goto err_free_iqrx_7;
-		writel(dpriv->iqrx_dma, ioaddr + IQRX0 + i*4);
-	}
-
-	/* Cf application hint. Beware of hard-lock condition on threshold. */
-	writel(0x42104000, ioaddr + FIFOCR1);
-	//writel(0x9ce69800, ioaddr + FIFOCR2);
-	writel(0xdef6d800, ioaddr + FIFOCR2);
-	//writel(0x11111111, ioaddr + FIFOCR4);
-	writel(0x18181818, ioaddr + FIFOCR4);
-	// FIXME: should depend on the chipset revision
-	writel(0x0000000e, ioaddr + FIFOCR3);
-
-	writel(0xff200001, ioaddr + GCMDR);
-
-	rc = 0;
-out:
-	return rc;
-
-err_free_iqrx_7:
-	while (--i >= 0) {
-		dpriv = priv->root + i;
-		dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32),
-				  dpriv->iqrx, dpriv->iqrx_dma);
-	}
-	i = dev_per_card;
-err_free_iqtx_6:
-	while (--i >= 0) {
-		dpriv = priv->root + i;
-		dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32),
-				  dpriv->iqtx, dpriv->iqtx_dma);
-	}
-	dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32), priv->iqcfg,
-			  priv->iqcfg_dma);
-err_free_irq_5:
-	free_irq(pdev->irq, priv->root);
-err_release_4:
-	dscc4_free1(pdev);
-err_iounmap_3:
-	iounmap (ioaddr);
-err_free_mmio_regions_2:
-	pci_release_region(pdev, 1);
-err_free_mmio_region_1:
-	pci_release_region(pdev, 0);
-err_disable_0:
-	pci_disable_device(pdev);
-	goto out;
-};
-
-/*
- * Let's hope the default values are decent enough to protect my
- * feet from the user's gun - Ueimor
- */
-static void dscc4_init_registers(struct dscc4_dev_priv *dpriv,
-				 struct net_device *dev)
-{
-	/* No interrupts, SCC core disabled. Let's relax */
-	scc_writel(0x00000000, dpriv, dev, CCR0);
-
-	scc_writel(LengthCheck | (HDLC_MAX_MRU >> 5), dpriv, dev, RLCR);
-
-	/*
-	 * No address recognition/crc-CCITT/cts enabled
-	 * Shared flags transmission disabled - cf errata DS5 p.11
-	 * Carrier detect disabled - cf errata p.14
-	 * FIXME: carrier detection/polarity may be handled more gracefully.
-	 */
-	scc_writel(0x02408000, dpriv, dev, CCR1);
-
-	/* crc not forwarded - Cf errata DS5 p.11 */
-	scc_writel(0x00050008 & ~RxActivate, dpriv, dev, CCR2);
-	// crc forwarded
-	//scc_writel(0x00250008 & ~RxActivate, dpriv, dev, CCR2);
-}
-
-static inline int dscc4_set_quartz(struct dscc4_dev_priv *dpriv, int hz)
-{
-	int ret = 0;
-
-	if ((hz < 0) || (hz > DSCC4_HZ_MAX))
-		ret = -EOPNOTSUPP;
-	else
-		dpriv->pci_priv->xtal_hz = hz;
-
-	return ret;
-}
-
-static const struct net_device_ops dscc4_ops = {
-	.ndo_open       = dscc4_open,
-	.ndo_stop       = dscc4_close,
-	.ndo_start_xmit = hdlc_start_xmit,
-	.ndo_do_ioctl   = dscc4_ioctl,
-	.ndo_tx_timeout = dscc4_tx_timeout,
-};
-
-static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
-{
-	struct dscc4_pci_priv *ppriv;
-	struct dscc4_dev_priv *root;
-	int i, ret = -ENOMEM;
-
-	root = kcalloc(dev_per_card, sizeof(*root), GFP_KERNEL);
-	if (!root)
-		goto err_out;
-
-	for (i = 0; i < dev_per_card; i++) {
-		root[i].dev = alloc_hdlcdev(root + i);
-		if (!root[i].dev)
-			goto err_free_dev;
-	}
-
-	ppriv = kzalloc(sizeof(*ppriv), GFP_KERNEL);
-	if (!ppriv)
-		goto err_free_dev;
-
-	ppriv->root = root;
-	spin_lock_init(&ppriv->lock);
-
-	for (i = 0; i < dev_per_card; i++) {
-		struct dscc4_dev_priv *dpriv = root + i;
-		struct net_device *d = dscc4_to_dev(dpriv);
-		hdlc_device *hdlc = dev_to_hdlc(d);
-
-	        d->base_addr = (unsigned long)ioaddr;
-	        d->irq = pdev->irq;
-		d->netdev_ops = &dscc4_ops;
-		d->watchdog_timeo = TX_TIMEOUT;
-		SET_NETDEV_DEV(d, &pdev->dev);
-
-		dpriv->dev_id = i;
-		dpriv->pci_priv = ppriv;
-		dpriv->base_addr = ioaddr;
-		spin_lock_init(&dpriv->lock);
-
-		hdlc->xmit = dscc4_start_xmit;
-		hdlc->attach = dscc4_hdlc_attach;
-
-		dscc4_init_registers(dpriv, d);
-		dpriv->parity = PARITY_CRC16_PR0_CCITT;
-		dpriv->encoding = ENCODING_NRZ;
-	
-		ret = dscc4_init_ring(d);
-		if (ret < 0)
-			goto err_unregister;
-
-		ret = register_hdlc_device(d);
-		if (ret < 0) {
-			pr_err("unable to register\n");
-			dscc4_release_ring(dpriv);
-			goto err_unregister;
-	        }
-	}
-
-	ret = dscc4_set_quartz(root, quartz);
-	if (ret < 0)
-		goto err_unregister;
-
-	pci_set_drvdata(pdev, ppriv);
-	return ret;
-
-err_unregister:
-	while (i-- > 0) {
-		dscc4_release_ring(root + i);
-		unregister_hdlc_device(dscc4_to_dev(root + i));
-	}
-	kfree(ppriv);
-	i = dev_per_card;
-err_free_dev:
-	while (i-- > 0)
-		free_netdev(root[i].dev);
-	kfree(root);
-err_out:
-	return ret;
-};
-
-static void dscc4_tx_timeout(struct net_device *dev)
-{
-	/* FIXME: something is missing there */
-}
-
-static int dscc4_loopback_check(struct dscc4_dev_priv *dpriv)
-{
-	sync_serial_settings *settings = &dpriv->settings;
-
-	if (settings->loopback && (settings->clock_type != CLOCK_INT)) {
-		struct net_device *dev = dscc4_to_dev(dpriv);
-
-		netdev_info(dev, "loopback requires clock\n");
-		return -1;
-	}
-	return 0;
-}
-
-#ifdef CONFIG_DSCC4_PCI_RST
-/*
- * Some DSCC4-based cards wires the GPIO port and the PCI #RST pin together
- * so as to provide a safe way to reset the asic while not the whole machine
- * rebooting.
- *
- * This code doesn't need to be efficient. Keep It Simple
- */
-static void dscc4_pci_reset(struct pci_dev *pdev, void __iomem *ioaddr)
-{
-	int i;
-
-	mutex_lock(&dscc4_mutex);
-	for (i = 0; i < 16; i++)
-		pci_read_config_dword(pdev, i << 2, dscc4_pci_config_store + i);
-
-	/* Maximal LBI clock divider (who cares ?) and whole GPIO range. */
-	writel(0x001c0000, ioaddr + GMODE);
-	/* Configure GPIO port as output */
-	writel(0x0000ffff, ioaddr + GPDIR);
-	/* Disable interruption */
-	writel(0x0000ffff, ioaddr + GPIM);
-
-	writel(0x0000ffff, ioaddr + GPDATA);
-	writel(0x00000000, ioaddr + GPDATA);
-
-	/* Flush posted writes */
-	readl(ioaddr + GSTAR);
-
-	schedule_timeout_uninterruptible(msecs_to_jiffies(100));
-
-	for (i = 0; i < 16; i++)
-		pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]);
-	mutex_unlock(&dscc4_mutex);
-}
-#else
-#define dscc4_pci_reset(pdev,ioaddr)	do {} while (0)
-#endif /* CONFIG_DSCC4_PCI_RST */
-
-static int dscc4_open(struct net_device *dev)
-{
-	struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
-	int ret = -EAGAIN;
-
-	if ((dscc4_loopback_check(dpriv) < 0))
-		goto err;
-
-	if ((ret = hdlc_open(dev)))
-		goto err;
-
-	/*
-	 * Due to various bugs, there is no way to reliably reset a
-	 * specific port (manufacturer's dependent special PCI #RST wiring
-	 * apart: it affects all ports). Thus the device goes in the best
-	 * silent mode possible at dscc4_close() time and simply claims to
-	 * be up if it's opened again. It still isn't possible to change
-	 * the HDLC configuration without rebooting but at least the ports
-	 * can be up/down ifconfig'ed without killing the host.
-	 */
-	if (dpriv->flags & FakeReset) {
-		dpriv->flags &= ~FakeReset;
-		scc_patchl(0, PowerUp, dpriv, dev, CCR0);
-		scc_patchl(0, 0x00050000, dpriv, dev, CCR2);
-		scc_writel(EventsMask, dpriv, dev, IMR);
-		netdev_info(dev, "up again\n");
-		goto done;
-	}
-
-	/* IDT+IDR during XPR */
-	dpriv->flags = NeedIDR | NeedIDT;
-
-	scc_patchl(0, PowerUp | Vis, dpriv, dev, CCR0);
-
-	/*
-	 * The following is a bit paranoid...
-	 *
-	 * NB: the datasheet "...CEC will stay active if the SCC is in
-	 * power-down mode or..." and CCR2.RAC = 1 are two different
-	 * situations.
-	 */
-	if (scc_readl_star(dpriv, dev) & SccBusy) {
-		netdev_err(dev, "busy - try later\n");
-		ret = -EAGAIN;
-		goto err_out;
-	} else
-		netdev_info(dev, "available - good\n");
-
-	scc_writel(EventsMask, dpriv, dev, IMR);
-
-	/* Posted write is flushed in the wait_ack loop */
-	scc_writel(TxSccRes | RxSccRes, dpriv, dev, CMDR);
-
-	if ((ret = dscc4_wait_ack_cec(dpriv, dev, "Cec")) < 0)
-		goto err_disable_scc_events;
-
-	/*
-	 * I would expect XPR near CE completion (before ? after ?).
-	 * At worst, this code won't see a late XPR and people
-	 * will have to re-issue an ifconfig (this is harmless).
-	 * WARNING, a really missing XPR usually means a hardware
-	 * reset is needed. Suggestions anyone ?
-	 */
-	if ((ret = dscc4_xpr_ack(dpriv)) < 0) {
-		pr_err("XPR timeout\n");
-		goto err_disable_scc_events;
-	}
-	
-	if (debug > 2)
-		dscc4_tx_print(dev, dpriv, "Open");
-
-done:
-	netif_start_queue(dev);
-
-	netif_carrier_on(dev);
-
-	return 0;
-
-err_disable_scc_events:
-	scc_writel(0xffffffff, dpriv, dev, IMR);
-	scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0);
-err_out:
-	hdlc_close(dev);
-err:
-	return ret;
-}
-
-#ifdef DSCC4_POLLING
-static int dscc4_tx_poll(struct dscc4_dev_priv *dpriv, struct net_device *dev)
-{
-	/* FIXME: it's gonna be easy (TM), for sure */
-}
-#endif /* DSCC4_POLLING */
-
-static netdev_tx_t dscc4_start_xmit(struct sk_buff *skb,
-					  struct net_device *dev)
-{
-	struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
-	struct device *d = &dpriv->pci_priv->pdev->dev;
-	struct TxFD *tx_fd;
-	dma_addr_t addr;
-	int next;
-
-	addr = dma_map_single(d, skb->data, skb->len, DMA_TO_DEVICE);
-	if (dma_mapping_error(d, addr)) {
-		dev_kfree_skb_any(skb);
-		dev->stats.tx_dropped++;
-		return NETDEV_TX_OK;
-	}
-
-	next = dpriv->tx_current%TX_RING_SIZE;
-	dpriv->tx_skbuff[next] = skb;
-	tx_fd = dpriv->tx_fd + next;
-	tx_fd->state = FrameEnd | TO_STATE_TX(skb->len);
-	tx_fd->data = cpu_to_le32(addr);
-	tx_fd->complete = 0x00000000;
-	tx_fd->jiffies = jiffies;
-	mb();
-
-#ifdef DSCC4_POLLING
-	spin_lock(&dpriv->lock);
-	while (dscc4_tx_poll(dpriv, dev));
-	spin_unlock(&dpriv->lock);
-#endif
-
-	if (debug > 2)
-		dscc4_tx_print(dev, dpriv, "Xmit");
-	/* To be cleaned(unsigned int)/optimized. Later, ok ? */
-	if (!((++dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE))
-		netif_stop_queue(dev);
-
-	if (dscc4_tx_quiescent(dpriv, dev))
-		dscc4_do_tx(dpriv, dev);
-
-	return NETDEV_TX_OK;
-}
-
-static int dscc4_close(struct net_device *dev)
-{
-	struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
-
-	netif_stop_queue(dev);
-
-	scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0);
-	scc_patchl(0x00050000, 0, dpriv, dev, CCR2);
-	scc_writel(0xffffffff, dpriv, dev, IMR);
-
-	dpriv->flags |= FakeReset;
-
-	hdlc_close(dev);
-
-	return 0;
-}
-
-static inline int dscc4_check_clock_ability(int port)
-{
-	int ret = 0;
-
-#ifdef CONFIG_DSCC4_PCISYNC
-	if (port >= 2)
-		ret = -1;
-#endif
-	return ret;
-}
-
-/*
- * DS1 p.137: "There are a total of 13 different clocking modes..."
- *                                  ^^
- * Design choices:
- * - by default, assume a clock is provided on pin RxClk/TxClk (clock mode 0a).
- *   Clock mode 3b _should_ work but the testing seems to make this point
- *   dubious (DIY testing requires setting CCR0 at 0x00000033).
- *   This is supposed to provide least surprise "DTE like" behavior.
- * - if line rate is specified, clocks are assumed to be locally generated.
- *   A quartz must be available (on pin XTAL1). Modes 6b/7b are used. Choosing
- *   between these it automagically done according on the required frequency
- *   scaling. Of course some rounding may take place.
- * - no high speed mode (40Mb/s). May be trivial to do but I don't have an
- *   appropriate external clocking device for testing.
- * - no time-slot/clock mode 5: shameless laziness.
- *
- * The clock signals wiring can be (is ?) manufacturer dependent. Good luck.
- *
- * BIG FAT WARNING: if the device isn't provided enough clocking signal, it
- * won't pass the init sequence. For example, straight back-to-back DTE without
- * external clock will fail when dscc4_open() (<- 'ifconfig hdlcx xxx') is
- * called.
- *
- * Typos lurk in datasheet (missing divier in clock mode 7a figure 51 p.153
- * DS0 for example)
- *
- * Clock mode related bits of CCR0:
- *     +------------ TOE: output TxClk (0b/2b/3a/3b/6b/7a/7b only)
- *     | +---------- SSEL: sub-mode select 0 -> a, 1 -> b
- *     | | +-------- High Speed: say 0
- *     | | | +-+-+-- Clock Mode: 0..7
- *     | | | | | |
- * -+-+-+-+-+-+-+-+
- * x|x|5|4|3|2|1|0| lower bits
- *
- * Division factor of BRR: k = (N+1)x2^M (total divider = 16xk in mode 6b)
- *            +-+-+-+------------------ M (0..15)
- *            | | | |     +-+-+-+-+-+-- N (0..63)
- *    0 0 0 0 | | | | 0 0 | | | | | |
- * ...-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *    f|e|d|c|b|a|9|8|7|6|5|4|3|2|1|0| lower bits
- *
- */
-static int dscc4_set_clock(struct net_device *dev, u32 *bps, u32 *state)
-{
-	struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
-	int ret = -1;
-	u32 brr;
-
-	*state &= ~Ccr0ClockMask;
-	if (*bps) { /* Clock generated - required for DCE */
-		u32 n = 0, m = 0, divider;
-		int xtal;
-
-		xtal = dpriv->pci_priv->xtal_hz;
-		if (!xtal)
-			goto done;
-		if (dscc4_check_clock_ability(dpriv->dev_id) < 0)
-			goto done;
-		divider = xtal / *bps;
-		if (divider > BRR_DIVIDER_MAX) {
-			divider >>= 4;
-			*state |= 0x00000036; /* Clock mode 6b (BRG/16) */
-		} else
-			*state |= 0x00000037; /* Clock mode 7b (BRG) */
-		if (divider >> 22) {
-			n = 63;
-			m = 15;
-		} else if (divider) {
-			/* Extraction of the 6 highest weighted bits */
-			m = 0;
-			while (0xffffffc0 & divider) {
-				m++;
-				divider >>= 1;
-			}
-			n = divider;
-		}
-		brr = (m << 8) | n;
-		divider = n << m;
-		if (!(*state & 0x00000001)) /* ?b mode mask => clock mode 6b */
-			divider <<= 4;
-		*bps = xtal / divider;
-	} else {
-		/*
-		 * External clock - DTE
-		 * "state" already reflects Clock mode 0a (CCR0 = 0xzzzzzz00).
-		 * Nothing more to be done
-		 */
-		brr = 0;
-	}
-	scc_writel(brr, dpriv, dev, BRR);
-	ret = 0;
-done:
-	return ret;
-}
-
-static int dscc4_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
-	struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
-	const size_t size = sizeof(dpriv->settings);
-	int ret = 0;
-
-        if (dev->flags & IFF_UP)
-                return -EBUSY;
-
-	if (cmd != SIOCWANDEV)
-		return -EOPNOTSUPP;
-
-	switch(ifr->ifr_settings.type) {
-	case IF_GET_IFACE:
-		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
-		if (ifr->ifr_settings.size < size) {
-			ifr->ifr_settings.size = size; /* data size wanted */
-			return -ENOBUFS;
-		}
-		if (copy_to_user(line, &dpriv->settings, size))
-			return -EFAULT;
-		break;
-
-	case IF_IFACE_SYNC_SERIAL:
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-
-		if (dpriv->flags & FakeReset) {
-			netdev_info(dev, "please reset the device before this command\n");
-			return -EPERM;
-		}
-		if (copy_from_user(&dpriv->settings, line, size))
-			return -EFAULT;
-		ret = dscc4_set_iface(dpriv, dev);
-		break;
-
-	default:
-		ret = hdlc_ioctl(dev, ifr, cmd);
-		break;
-	}
-
-	return ret;
-}
-
-static int dscc4_match(const struct thingie *p, int value)
-{
-	int i;
-
-	for (i = 0; p[i].define != -1; i++) {
-		if (value == p[i].define)
-			break;
-	}
-	if (p[i].define == -1)
-		return -1;
-	else
-		return i;
-}
-
-static int dscc4_clock_setting(struct dscc4_dev_priv *dpriv,
-			       struct net_device *dev)
-{
-	sync_serial_settings *settings = &dpriv->settings;
-	int ret = -EOPNOTSUPP;
-	u32 bps, state;
-
-	bps = settings->clock_rate;
-	state = scc_readl(dpriv, CCR0);
-	if (dscc4_set_clock(dev, &bps, &state) < 0)
-		goto done;
-	if (bps) { /* DCE */
-		printk(KERN_DEBUG "%s: generated RxClk (DCE)\n", dev->name);
-		if (settings->clock_rate != bps) {
-			printk(KERN_DEBUG "%s: clock adjusted (%08d -> %08d)\n",
-				dev->name, settings->clock_rate, bps);
-			settings->clock_rate = bps;
-		}
-	} else { /* DTE */
-		state |= PowerUp | Vis;
-		printk(KERN_DEBUG "%s: external RxClk (DTE)\n", dev->name);
-	}
-	scc_writel(state, dpriv, dev, CCR0);
-	ret = 0;
-done:
-	return ret;
-}
-
-static int dscc4_encoding_setting(struct dscc4_dev_priv *dpriv,
-				  struct net_device *dev)
-{
-	static const struct thingie encoding[] = {
-		{ ENCODING_NRZ,		0x00000000 },
-		{ ENCODING_NRZI,	0x00200000 },
-		{ ENCODING_FM_MARK,	0x00400000 },
-		{ ENCODING_FM_SPACE,	0x00500000 },
-		{ ENCODING_MANCHESTER,	0x00600000 },
-		{ -1,			0}
-	};
-	int i, ret = 0;
-
-	i = dscc4_match(encoding, dpriv->encoding);
-	if (i >= 0)
-		scc_patchl(EncodingMask, encoding[i].bits, dpriv, dev, CCR0);
-	else
-		ret = -EOPNOTSUPP;
-	return ret;
-}
-
-static int dscc4_loopback_setting(struct dscc4_dev_priv *dpriv,
-				  struct net_device *dev)
-{
-	sync_serial_settings *settings = &dpriv->settings;
-	u32 state;
-
-	state = scc_readl(dpriv, CCR1);
-	if (settings->loopback) {
-		printk(KERN_DEBUG "%s: loopback\n", dev->name);
-		state |= 0x00000100;
-	} else {
-		printk(KERN_DEBUG "%s: normal\n", dev->name);
-		state &= ~0x00000100;
-	}
-	scc_writel(state, dpriv, dev, CCR1);
-	return 0;
-}
-
-static int dscc4_crc_setting(struct dscc4_dev_priv *dpriv,
-			     struct net_device *dev)
-{
-	static const struct thingie crc[] = {
-		{ PARITY_CRC16_PR0_CCITT,	0x00000010 },
-		{ PARITY_CRC16_PR1_CCITT,	0x00000000 },
-		{ PARITY_CRC32_PR0_CCITT,	0x00000011 },
-		{ PARITY_CRC32_PR1_CCITT,	0x00000001 }
-	};
-	int i, ret = 0;
-
-	i = dscc4_match(crc, dpriv->parity);
-	if (i >= 0)
-		scc_patchl(CrcMask, crc[i].bits, dpriv, dev, CCR1);
-	else
-		ret = -EOPNOTSUPP;
-	return ret;
-}
-
-static int dscc4_set_iface(struct dscc4_dev_priv *dpriv, struct net_device *dev)
-{
-	struct {
-		int (*action)(struct dscc4_dev_priv *, struct net_device *);
-	} *p, do_setting[] = {
-		{ dscc4_encoding_setting },
-		{ dscc4_clock_setting },
-		{ dscc4_loopback_setting },
-		{ dscc4_crc_setting },
-		{ NULL }
-	};
-	int ret = 0;
-
-	for (p = do_setting; p->action; p++) {
-		if ((ret = p->action(dpriv, dev)) < 0)
-			break;
-	}
-	return ret;
-}
-
-static irqreturn_t dscc4_irq(int irq, void *token)
-{
-	struct dscc4_dev_priv *root = token;
-	struct dscc4_pci_priv *priv;
-	struct net_device *dev;
-	void __iomem *ioaddr;
-	u32 state;
-	unsigned long flags;
-	int i, handled = 1;
-
-	priv = root->pci_priv;
-	dev = dscc4_to_dev(root);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	ioaddr = root->base_addr;
-
-	state = readl(ioaddr + GSTAR);
-	if (!state) {
-		handled = 0;
-		goto out;
-	}
-	if (debug > 3)
-		printk(KERN_DEBUG "%s: GSTAR = 0x%08x\n", DRV_NAME, state);
-	writel(state, ioaddr + GSTAR);
-
-	if (state & Arf) {
-		netdev_err(dev, "failure (Arf). Harass the maintainer\n");
-		goto out;
-	}
-	state &= ~ArAck;
-	if (state & Cfg) {
-		if (debug > 0)
-			printk(KERN_DEBUG "%s: CfgIV\n", DRV_NAME);
-		if (priv->iqcfg[priv->cfg_cur++%IRQ_RING_SIZE] & cpu_to_le32(Arf))
-			netdev_err(dev, "CFG failed\n");
-		if (!(state &= ~Cfg))
-			goto out;
-	}
-	if (state & RxEvt) {
-		i = dev_per_card - 1;
-		do {
-			dscc4_rx_irq(priv, root + i);
-		} while (--i >= 0);
-		state &= ~RxEvt;
-	}
-	if (state & TxEvt) {
-		i = dev_per_card - 1;
-		do {
-			dscc4_tx_irq(priv, root + i);
-		} while (--i >= 0);
-		state &= ~TxEvt;
-	}
-out:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return IRQ_RETVAL(handled);
-}
-
-static void dscc4_tx_irq(struct dscc4_pci_priv *ppriv,
-				struct dscc4_dev_priv *dpriv)
-{
-	struct net_device *dev = dscc4_to_dev(dpriv);
-	u32 state;
-	int cur, loop = 0;
-
-try:
-	cur = dpriv->iqtx_current%IRQ_RING_SIZE;
-	state = le32_to_cpu(dpriv->iqtx[cur]);
-	if (!state) {
-		if (debug > 4)
-			printk(KERN_DEBUG "%s: Tx ISR = 0x%08x\n", dev->name,
-			       state);
-		if ((debug > 1) && (loop > 1))
-			printk(KERN_DEBUG "%s: Tx irq loop=%d\n", dev->name, loop);
-		if (loop && netif_queue_stopped(dev))
-			if ((dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE)
-				netif_wake_queue(dev);
-
-		if (netif_running(dev) && dscc4_tx_quiescent(dpriv, dev) &&
-		    !dscc4_tx_done(dpriv))
-				dscc4_do_tx(dpriv, dev);
-		return;
-	}
-	loop++;
-	dpriv->iqtx[cur] = 0;
-	dpriv->iqtx_current++;
-
-	if (state_check(state, dpriv, dev, "Tx") < 0)
-		return;
-
-	if (state & SccEvt) {
-		if (state & Alls) {
-			struct sk_buff *skb;
-			struct TxFD *tx_fd;
-
-			if (debug > 2)
-				dscc4_tx_print(dev, dpriv, "Alls");
-			/*
-			 * DataComplete can't be trusted for Tx completion.
-			 * Cf errata DS5 p.8
-			 */
-			cur = dpriv->tx_dirty%TX_RING_SIZE;
-			tx_fd = dpriv->tx_fd + cur;
-			skb = dpriv->tx_skbuff[cur];
-			if (skb) {
-				dma_unmap_single(&ppriv->pdev->dev,
-						 le32_to_cpu(tx_fd->data),
-						 skb->len, DMA_TO_DEVICE);
-				if (tx_fd->state & FrameEnd) {
-					dev->stats.tx_packets++;
-					dev->stats.tx_bytes += skb->len;
-				}
-				dev_consume_skb_irq(skb);
-				dpriv->tx_skbuff[cur] = NULL;
-				++dpriv->tx_dirty;
-			} else {
-				if (debug > 1)
-					netdev_err(dev, "Tx: NULL skb %d\n",
-						   cur);
-			}
-			/*
-			 * If the driver ends sending crap on the wire, it
-			 * will be way easier to diagnose than the (not so)
-			 * random freeze induced by null sized tx frames.
-			 */
-			tx_fd->data = tx_fd->next;
-			tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE);
-			tx_fd->complete = 0x00000000;
-			tx_fd->jiffies = 0;
-
-			if (!(state &= ~Alls))
-				goto try;
-		}
-		/*
-		 * Transmit Data Underrun
-		 */
-		if (state & Xdu) {
-			netdev_err(dev, "Tx Data Underrun. Ask maintainer\n");
-			dpriv->flags = NeedIDT;
-			/* Tx reset */
-			writel(MTFi | Rdt,
-			       dpriv->base_addr + 0x0c*dpriv->dev_id + CH0CFG);
-			writel(Action, dpriv->base_addr + GCMDR);
-			return;
-		}
-		if (state & Cts) {
-			netdev_info(dev, "CTS transition\n");
-			if (!(state &= ~Cts)) /* DEBUG */
-				goto try;
-		}
-		if (state & Xmr) {
-			/* Frame needs to be sent again - FIXME */
-			netdev_err(dev, "Tx ReTx. Ask maintainer\n");
-			if (!(state &= ~Xmr)) /* DEBUG */
-				goto try;
-		}
-		if (state & Xpr) {
-			void __iomem *scc_addr;
-			unsigned long ring;
-			unsigned int i;
-
-			/*
-			 * - the busy condition happens (sometimes);
-			 * - it doesn't seem to make the handler unreliable.
-			 */
-			for (i = 1; i; i <<= 1) {
-				if (!(scc_readl_star(dpriv, dev) & SccBusy))
-					break;
-			}
-			if (!i)
-				netdev_info(dev, "busy in irq\n");
-
-			scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
-			/* Keep this order: IDT before IDR */
-			if (dpriv->flags & NeedIDT) {
-				if (debug > 2)
-					dscc4_tx_print(dev, dpriv, "Xpr");
-				ring = dpriv->tx_fd_dma +
-				       (dpriv->tx_dirty%TX_RING_SIZE)*
-				       sizeof(struct TxFD);
-				writel(ring, scc_addr + CH0BTDA);
-				dscc4_do_tx(dpriv, dev);
-				writel(MTFi | Idt, scc_addr + CH0CFG);
-				if (dscc4_do_action(dev, "IDT") < 0)
-					goto err_xpr;
-				dpriv->flags &= ~NeedIDT;
-			}
-			if (dpriv->flags & NeedIDR) {
-				ring = dpriv->rx_fd_dma +
-				       (dpriv->rx_current%RX_RING_SIZE)*
-				       sizeof(struct RxFD);
-				writel(ring, scc_addr + CH0BRDA);
-				dscc4_rx_update(dpriv, dev);
-				writel(MTFi | Idr, scc_addr + CH0CFG);
-				if (dscc4_do_action(dev, "IDR") < 0)
-					goto err_xpr;
-				dpriv->flags &= ~NeedIDR;
-				smp_wmb();
-				/* Activate receiver and misc */
-				scc_writel(0x08050008, dpriv, dev, CCR2);
-			}
-		err_xpr:
-			if (!(state &= ~Xpr))
-				goto try;
-		}
-		if (state & Cd) {
-			if (debug > 0)
-				netdev_info(dev, "CD transition\n");
-			if (!(state &= ~Cd)) /* DEBUG */
-				goto try;
-		}
-	} else { /* ! SccEvt */
-		if (state & Hi) {
-#ifdef DSCC4_POLLING
-			while (!dscc4_tx_poll(dpriv, dev));
-#endif
-			netdev_info(dev, "Tx Hi\n");
-			state &= ~Hi;
-		}
-		if (state & Err) {
-			netdev_info(dev, "Tx ERR\n");
-			dev->stats.tx_errors++;
-			state &= ~Err;
-		}
-	}
-	goto try;
-}
-
-static void dscc4_rx_irq(struct dscc4_pci_priv *priv,
-				    struct dscc4_dev_priv *dpriv)
-{
-	struct net_device *dev = dscc4_to_dev(dpriv);
-	u32 state;
-	int cur;
-
-try:
-	cur = dpriv->iqrx_current%IRQ_RING_SIZE;
-	state = le32_to_cpu(dpriv->iqrx[cur]);
-	if (!state)
-		return;
-	dpriv->iqrx[cur] = 0;
-	dpriv->iqrx_current++;
-
-	if (state_check(state, dpriv, dev, "Rx") < 0)
-		return;
-
-	if (!(state & SccEvt)){
-		struct RxFD *rx_fd;
-
-		if (debug > 4)
-			printk(KERN_DEBUG "%s: Rx ISR = 0x%08x\n", dev->name,
-			       state);
-		state &= 0x00ffffff;
-		if (state & Err) { /* Hold or reset */
-			printk(KERN_DEBUG "%s: Rx ERR\n", dev->name);
-			cur = dpriv->rx_current%RX_RING_SIZE;
-			rx_fd = dpriv->rx_fd + cur;
-			/*
-			 * Presume we're not facing a DMAC receiver reset.
-			 * As We use the rx size-filtering feature of the
-			 * DSCC4, the beginning of a new frame is waiting in
-			 * the rx fifo. I bet a Receive Data Overflow will
-			 * happen most of time but let's try and avoid it.
-			 * Btw (as for RDO) if one experiences ERR whereas
-			 * the system looks rather idle, there may be a
-			 * problem with latency. In this case, increasing
-			 * RX_RING_SIZE may help.
-			 */
-			//while (dpriv->rx_needs_refill) {
-				while (!(rx_fd->state1 & Hold)) {
-					rx_fd++;
-					cur++;
-					if (!(cur = cur%RX_RING_SIZE))
-						rx_fd = dpriv->rx_fd;
-				}
-				//dpriv->rx_needs_refill--;
-				try_get_rx_skb(dpriv, dev);
-				if (!rx_fd->data)
-					goto try;
-				rx_fd->state1 &= ~Hold;
-				rx_fd->state2 = 0x00000000;
-				rx_fd->end = cpu_to_le32(0xbabeface);
-			//}
-			goto try;
-		}
-		if (state & Fi) {
-			dscc4_rx_skb(dpriv, dev);
-			goto try;
-		}
-		if (state & Hi ) { /* HI bit */
-			netdev_info(dev, "Rx Hi\n");
-			state &= ~Hi;
-			goto try;
-		}
-	} else { /* SccEvt */
-		if (debug > 1) {
-			//FIXME: verifier la presence de tous les evenements
-			static struct {
-				u32 mask;
-				const char *irq_name;
-			} evts[] = {
-				{ 0x00008000, "TIN"},
-				{ 0x00000020, "RSC"},
-				{ 0x00000010, "PCE"},
-				{ 0x00000008, "PLLA"},
-				{ 0, NULL}
-			}, *evt;
-
-			for (evt = evts; evt->irq_name; evt++) {
-				if (state & evt->mask) {
-					printk(KERN_DEBUG "%s: %s\n",
-					       dev->name, evt->irq_name);
-					if (!(state &= ~evt->mask))
-						goto try;
-				}
-			}
-		} else {
-			if (!(state &= ~0x0000c03c))
-				goto try;
-		}
-		if (state & Cts) {
-			netdev_info(dev, "CTS transition\n");
-			if (!(state &= ~Cts)) /* DEBUG */
-				goto try;
-		}
-		/*
-		 * Receive Data Overflow (FIXME: fscked)
-		 */
-		if (state & Rdo) {
-			struct RxFD *rx_fd;
-			void __iomem *scc_addr;
-			int cur;
-
-			//if (debug)
-			//	dscc4_rx_dump(dpriv);
-			scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
-
-			scc_patchl(RxActivate, 0, dpriv, dev, CCR2);
-			/*
-			 * This has no effect. Why ?
-			 * ORed with TxSccRes, one sees the CFG ack (for
-			 * the TX part only).
-			 */
-			scc_writel(RxSccRes, dpriv, dev, CMDR);
-			dpriv->flags |= RdoSet;
-
-			/*
-			 * Let's try and save something in the received data.
-			 * rx_current must be incremented at least once to
-			 * avoid HOLD in the BRDA-to-be-pointed desc.
-			 */
-			do {
-				cur = dpriv->rx_current++%RX_RING_SIZE;
-				rx_fd = dpriv->rx_fd + cur;
-				if (!(rx_fd->state2 & DataComplete))
-					break;
-				if (rx_fd->state2 & FrameAborted) {
-					dev->stats.rx_over_errors++;
-					rx_fd->state1 |= Hold;
-					rx_fd->state2 = 0x00000000;
-					rx_fd->end = cpu_to_le32(0xbabeface);
-				} else
-					dscc4_rx_skb(dpriv, dev);
-			} while (1);
-
-			if (debug > 0) {
-				if (dpriv->flags & RdoSet)
-					printk(KERN_DEBUG
-					       "%s: no RDO in Rx data\n", DRV_NAME);
-			}
-#ifdef DSCC4_RDO_EXPERIMENTAL_RECOVERY
-			/*
-			 * FIXME: must the reset be this violent ?
-			 */
-#warning "FIXME: CH0BRDA"
-			writel(dpriv->rx_fd_dma +
-			       (dpriv->rx_current%RX_RING_SIZE)*
-			       sizeof(struct RxFD), scc_addr + CH0BRDA);
-			writel(MTFi|Rdr|Idr, scc_addr + CH0CFG);
-			if (dscc4_do_action(dev, "RDR") < 0) {
-				netdev_err(dev, "RDO recovery failed(RDR)\n");
-				goto rdo_end;
-			}
-			writel(MTFi|Idr, scc_addr + CH0CFG);
-			if (dscc4_do_action(dev, "IDR") < 0) {
-				netdev_err(dev, "RDO recovery failed(IDR)\n");
-				goto rdo_end;
-			}
-		rdo_end:
-#endif
-			scc_patchl(0, RxActivate, dpriv, dev, CCR2);
-			goto try;
-		}
-		if (state & Cd) {
-			netdev_info(dev, "CD transition\n");
-			if (!(state &= ~Cd)) /* DEBUG */
-				goto try;
-		}
-		if (state & Flex) {
-			printk(KERN_DEBUG "%s: Flex. Ttttt...\n", DRV_NAME);
-			if (!(state &= ~Flex))
-				goto try;
-		}
-	}
-}
-
-/*
- * I had expected the following to work for the first descriptor
- * (tx_fd->state = 0xc0000000)
- * - Hold=1 (don't try and branch to the next descripto);
- * - No=0 (I want an empty data section, i.e. size=0);
- * - Fe=1 (required by No=0 or we got an Err irq and must reset).
- * It failed and locked solid. Thus the introduction of a dummy skb.
- * Problem is acknowledged in errata sheet DS5. Joy :o/
- */
-static struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv)
-{
-	struct sk_buff *skb;
-
-	skb = dev_alloc_skb(DUMMY_SKB_SIZE);
-	if (skb) {
-		struct device *d = &dpriv->pci_priv->pdev->dev;
-		int last = dpriv->tx_dirty%TX_RING_SIZE;
-		struct TxFD *tx_fd = dpriv->tx_fd + last;
-		dma_addr_t addr;
-
-		skb->len = DUMMY_SKB_SIZE;
-		skb_copy_to_linear_data(skb, version,
-					strlen(version) % DUMMY_SKB_SIZE);
-		addr = dma_map_single(d, skb->data, DUMMY_SKB_SIZE,
-				      DMA_TO_DEVICE);
-		if (dma_mapping_error(d, addr)) {
-			dev_kfree_skb_any(skb);
-			return NULL;
-		}
-		tx_fd->state = FrameEnd | TO_STATE_TX(DUMMY_SKB_SIZE);
-		tx_fd->data = cpu_to_le32(addr);
-		dpriv->tx_skbuff[last] = skb;
-	}
-	return skb;
-}
-
-static int dscc4_init_ring(struct net_device *dev)
-{
-	struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
-	struct device *d = &dpriv->pci_priv->pdev->dev;
-	struct TxFD *tx_fd;
-	struct RxFD *rx_fd;
-	void *ring;
-	int i;
-
-	ring = dma_alloc_coherent(d, RX_TOTAL_SIZE, &dpriv->rx_fd_dma,
-				  GFP_KERNEL);
-	if (!ring)
-		goto err_out;
-	dpriv->rx_fd = rx_fd = (struct RxFD *) ring;
-
-	ring = dma_alloc_coherent(d, TX_TOTAL_SIZE, &dpriv->tx_fd_dma,
-				  GFP_KERNEL);
-	if (!ring)
-		goto err_free_dma_rx;
-	dpriv->tx_fd = tx_fd = (struct TxFD *) ring;
-
-	memset(dpriv->tx_skbuff, 0, sizeof(struct sk_buff *)*TX_RING_SIZE);
-	dpriv->tx_dirty = 0xffffffff;
-	i = dpriv->tx_current = 0;
-	do {
-		tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE);
-		tx_fd->complete = 0x00000000;
-	        /* FIXME: NULL should be ok - to be tried */
-	        tx_fd->data = cpu_to_le32(dpriv->tx_fd_dma);
-		(tx_fd++)->next = cpu_to_le32(dpriv->tx_fd_dma +
-					(++i%TX_RING_SIZE)*sizeof(*tx_fd));
-	} while (i < TX_RING_SIZE);
-
-	if (!dscc4_init_dummy_skb(dpriv))
-		goto err_free_dma_tx;
-
-	memset(dpriv->rx_skbuff, 0, sizeof(struct sk_buff *)*RX_RING_SIZE);
-	i = dpriv->rx_dirty = dpriv->rx_current = 0;
-	do {
-		/* size set by the host. Multiple of 4 bytes please */
-	        rx_fd->state1 = HiDesc;
-	        rx_fd->state2 = 0x00000000;
-	        rx_fd->end = cpu_to_le32(0xbabeface);
-	        rx_fd->state1 |= TO_STATE_RX(HDLC_MAX_MRU);
-		// FIXME: return value verifiee mais traitement suspect
-		if (try_get_rx_skb(dpriv, dev) >= 0)
-			dpriv->rx_dirty++;
-		(rx_fd++)->next = cpu_to_le32(dpriv->rx_fd_dma +
-					(++i%RX_RING_SIZE)*sizeof(*rx_fd));
-	} while (i < RX_RING_SIZE);
-
-	return 0;
-
-err_free_dma_tx:
-	dma_free_coherent(d, TX_TOTAL_SIZE, ring, dpriv->tx_fd_dma);
-err_free_dma_rx:
-	dma_free_coherent(d, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma);
-err_out:
-	return -ENOMEM;
-}
-
-static void dscc4_remove_one(struct pci_dev *pdev)
-{
-	struct dscc4_pci_priv *ppriv;
-	struct dscc4_dev_priv *root;
-	void __iomem *ioaddr;
-	int i;
-
-	ppriv = pci_get_drvdata(pdev);
-	root = ppriv->root;
-
-	ioaddr = root->base_addr;
-
-	dscc4_pci_reset(pdev, ioaddr);
-
-	free_irq(pdev->irq, root);
-	dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32), ppriv->iqcfg,
-			  ppriv->iqcfg_dma);
-	for (i = 0; i < dev_per_card; i++) {
-		struct dscc4_dev_priv *dpriv = root + i;
-
-		dscc4_release_ring(dpriv);
-		dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32),
-				  dpriv->iqrx, dpriv->iqrx_dma);
-		dma_free_coherent(&pdev->dev, IRQ_RING_SIZE*sizeof(u32),
-				  dpriv->iqtx, dpriv->iqtx_dma);
-	}
-
-	dscc4_free1(pdev);
-
-	iounmap(ioaddr);
-
-	pci_release_region(pdev, 1);
-	pci_release_region(pdev, 0);
-
-	pci_disable_device(pdev);
-}
-
-static int dscc4_hdlc_attach(struct net_device *dev, unsigned short encoding,
-	unsigned short parity)
-{
-	struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
-
-	if (encoding != ENCODING_NRZ &&
-	    encoding != ENCODING_NRZI &&
-	    encoding != ENCODING_FM_MARK &&
-	    encoding != ENCODING_FM_SPACE &&
-	    encoding != ENCODING_MANCHESTER)
-		return -EINVAL;
-
-	if (parity != PARITY_NONE &&
-	    parity != PARITY_CRC16_PR0_CCITT &&
-	    parity != PARITY_CRC16_PR1_CCITT &&
-	    parity != PARITY_CRC32_PR0_CCITT &&
-	    parity != PARITY_CRC32_PR1_CCITT)
-		return -EINVAL;
-
-        dpriv->encoding = encoding;
-        dpriv->parity = parity;
-	return 0;
-}
-
-#ifndef MODULE
-static int __init dscc4_setup(char *str)
-{
-	int *args[] = { &debug, &quartz, NULL }, **p = args;
-
-	while (*p && (get_option(&str, *p) == 2))
-		p++;
-	return 1;
-}
-
-__setup("dscc4.setup=", dscc4_setup);
-#endif
-
-static const struct pci_device_id dscc4_pci_tbl[] = {
-	{ PCI_VENDOR_ID_SIEMENS, PCI_DEVICE_ID_SIEMENS_DSCC4,
-	        PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0,}
-};
-MODULE_DEVICE_TABLE(pci, dscc4_pci_tbl);
-
-static struct pci_driver dscc4_driver = {
-	.name		= DRV_NAME,
-	.id_table	= dscc4_pci_tbl,
-	.probe		= dscc4_init_one,
-	.remove		= dscc4_remove_one,
-};
-
-module_pci_driver(dscc4_driver);