diff options
| author | Mark A. Greer <mgreer@animalcreek.com> | 2014-08-08 02:41:43 +0200 |
|---|---|---|
| committer | Samuel Ortiz <sameo@linux.intel.com> | 2014-09-01 00:06:55 +0200 |
| commit | 772079eb77587e0242752fa67685a8132d899f79 (patch) | |
| tree | 95a2cf8ec54431093321b6f3f3e0ec5381007f96 /drivers/nfc/trf7970a.c | |
| parent | NFC: trf7970a: Document the 'vin-voltage-override' DTS property (diff) | |
| download | linux-772079eb77587e0242752fa67685a8132d899f79.tar.xz linux-772079eb77587e0242752fa67685a8132d899f79.zip | |
NFC: trf7970a: Move IRQ Status Read quirk to device tree
The quirk indicating whether the trf7970a has
the "IRQ Status Read" erratum or not is currently
implemented using the 'driver_data' member of the
'spi_device_id' structure. That requires the
driver to be modified to turn the quirk off when
a version of the trf7970a that doesn't have the
erratum is being used. To fix that, create a
new device tree property called
'irq-status-read-quirk' that indicates that the
trf7970a being used has the erratum.
While at it, rename 'TRF7970A_QUIRK_IRQ_STATUS_READ_ERRATA'
to 'TRF7970A_QUIRK_IRQ_STATUS_READ' to make it
less of an eyesore.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/nfc/trf7970a.c')
| -rw-r--r-- | drivers/nfc/trf7970a.c | 11 |
1 files changed, 6 insertions, 5 deletions
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index 5355d0e4c045..3cc7001d7d2f 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -132,7 +132,7 @@ /* Erratum: When reading IRQ Status register on trf7970a, we must issue a * read continuous command for IRQ Status and Collision Position registers. */ -#define TRF7970A_QUIRK_IRQ_STATUS_READ_ERRATA BIT(0) +#define TRF7970A_QUIRK_IRQ_STATUS_READ BIT(0) /* Direct commands */ #define TRF7970A_CMD_IDLE 0x00 @@ -424,7 +424,7 @@ static int trf7970a_read_irqstatus(struct trf7970a *trf, u8 *status) addr = TRF7970A_IRQ_STATUS | TRF7970A_CMD_BIT_RW; - if (trf->quirks & TRF7970A_QUIRK_IRQ_STATUS_READ_ERRATA) { + if (trf->quirks & TRF7970A_QUIRK_IRQ_STATUS_READ) { addr |= TRF7970A_CMD_BIT_CONTINUOUS; ret = spi_write_then_read(trf->spi, &addr, 1, buf, 2); } else { @@ -1260,7 +1260,6 @@ static int trf7970a_get_vin_voltage_override(struct device_node *np, static int trf7970a_probe(struct spi_device *spi) { struct device_node *np = spi->dev.of_node; - const struct spi_device_id *id = spi_get_device_id(spi); struct trf7970a *trf; int uvolts, autosuspend_delay, ret; @@ -1276,11 +1275,13 @@ static int trf7970a_probe(struct spi_device *spi) trf->state = TRF7970A_ST_OFF; trf->dev = &spi->dev; trf->spi = spi; - trf->quirks = id->driver_data; spi->mode = SPI_MODE_1; spi->bits_per_word = 8; + if (of_property_read_bool(np, "irq-status-read-quirk")) + trf->quirks |= TRF7970A_QUIRK_IRQ_STATUS_READ; + /* There are two enable pins - both must be present */ trf->en_gpio = of_get_named_gpio(np, "ti,enable-gpios", 0); if (!gpio_is_valid(trf->en_gpio)) { @@ -1478,7 +1479,7 @@ static const struct dev_pm_ops trf7970a_pm_ops = { }; static const struct spi_device_id trf7970a_id_table[] = { - { "trf7970a", TRF7970A_QUIRK_IRQ_STATUS_READ_ERRATA }, + { "trf7970a", 0 }, { } }; MODULE_DEVICE_TABLE(spi, trf7970a_id_table); |