summaryrefslogtreecommitdiffstats
path: root/drivers/nfc
diff options
context:
space:
mode:
authorJohan Hovold <johan@kernel.org>2019-08-05 12:00:55 +0200
committerDavid S. Miller <davem@davemloft.net>2019-08-05 19:25:48 +0200
commitc3953a3c2d3175d2f9f0304c9a1ba89e7743c5e4 (patch)
tree07c316120fb7552531896ab03187c67b4038fada /drivers/nfc
parentnet/socket: fix GCC8+ Wpacked-not-aligned warnings (diff)
downloadlinux-c3953a3c2d3175d2f9f0304c9a1ba89e7743c5e4.tar.xz
linux-c3953a3c2d3175d2f9f0304c9a1ba89e7743c5e4.zip
NFC: nfcmrvl: fix gpio-handling regression
Fix two reset-gpio sanity checks which were never converted to use gpio_is_valid(), and make sure to use -EINVAL to indicate a missing reset line also for the UART-driver module parameter and for the USB driver. This specifically prevents the UART and USB drivers from incidentally trying to request and use gpio 0, and also avoids triggering a WARN() in gpio_to_desc() during probe when no valid reset line has been specified. Fixes: e33a3f84f88f ("NFC: nfcmrvl: allow gpio 0 for reset signalling") Reported-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Tested-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org>
Diffstat (limited to 'drivers/nfc')
-rw-r--r--drivers/nfc/nfcmrvl/main.c4
-rw-r--r--drivers/nfc/nfcmrvl/uart.c4
-rw-r--r--drivers/nfc/nfcmrvl/usb.c1
3 files changed, 5 insertions, 4 deletions
diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
index e65d027b91fa..529be35ac178 100644
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -244,7 +244,7 @@ void nfcmrvl_chip_reset(struct nfcmrvl_private *priv)
/* Reset possible fault of previous session */
clear_bit(NFCMRVL_PHY_ERROR, &priv->flags);
- if (priv->config.reset_n_io) {
+ if (gpio_is_valid(priv->config.reset_n_io)) {
nfc_info(priv->dev, "reset the chip\n");
gpio_set_value(priv->config.reset_n_io, 0);
usleep_range(5000, 10000);
@@ -255,7 +255,7 @@ void nfcmrvl_chip_reset(struct nfcmrvl_private *priv)
void nfcmrvl_chip_halt(struct nfcmrvl_private *priv)
{
- if (priv->config.reset_n_io)
+ if (gpio_is_valid(priv->config.reset_n_io))
gpio_set_value(priv->config.reset_n_io, 0);
}
diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c
index 9a22056e8d9e..e5a622ce4b95 100644
--- a/drivers/nfc/nfcmrvl/uart.c
+++ b/drivers/nfc/nfcmrvl/uart.c
@@ -26,7 +26,7 @@
static unsigned int hci_muxed;
static unsigned int flow_control;
static unsigned int break_control;
-static unsigned int reset_n_io;
+static int reset_n_io = -EINVAL;
/*
** NFCMRVL NCI OPS
@@ -231,5 +231,5 @@ MODULE_PARM_DESC(break_control, "Tell if UART driver must drive break signal.");
module_param(hci_muxed, uint, 0);
MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one.");
-module_param(reset_n_io, uint, 0);
+module_param(reset_n_io, int, 0);
MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal.");
diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c
index 945cc903d8f1..888e298f610b 100644
--- a/drivers/nfc/nfcmrvl/usb.c
+++ b/drivers/nfc/nfcmrvl/usb.c
@@ -305,6 +305,7 @@ static int nfcmrvl_probe(struct usb_interface *intf,
/* No configuration for USB */
memset(&config, 0, sizeof(config));
+ config.reset_n_io = -EINVAL;
nfc_info(&udev->dev, "intf %p id %p\n", intf, id);