summaryrefslogtreecommitdiffstats
path: root/drivers/opp
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@linaro.org>2021-01-21 07:42:09 +0100
committerViresh Kumar <viresh.kumar@linaro.org>2021-02-02 05:57:55 +0100
commit386ba854d9f3163aed0119b167a874169410d8bc (patch)
treeac0ed36a63ba4c771e74cbe9b536a8c0ed8b0259 /drivers/opp
parentopp: Keep track of currently programmed OPP (diff)
downloadlinux-386ba854d9f3163aed0119b167a874169410d8bc.tar.xz
linux-386ba854d9f3163aed0119b167a874169410d8bc.zip
opp: Split _set_opp() out of dev_pm_opp_set_rate()
The _set_opp() helper will be used for devices which don't change their frequency (like power domains, etc.) later on, prepare for that by breaking the generic part out of dev_pm_opp_set_rate(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
Diffstat (limited to 'drivers/opp')
-rw-r--r--drivers/opp/core.c126
1 files changed, 71 insertions, 55 deletions
diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index c77d8ae89836..2c8939d18783 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -998,72 +998,27 @@ static int _disable_opp_table(struct device *dev, struct opp_table *opp_table)
return ret;
}
-/**
- * dev_pm_opp_set_rate() - Configure new OPP based on frequency
- * @dev: device for which we do this operation
- * @target_freq: frequency to achieve
- *
- * This configures the power-supplies to the levels specified by the OPP
- * corresponding to the target_freq, and programs the clock to a value <=
- * target_freq, as rounded by clk_round_rate(). Device wanting to run at fmax
- * provided by the opp, should have already rounded to the target OPP's
- * frequency.
- */
-int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+static int _set_opp(struct device *dev, struct opp_table *opp_table,
+ struct dev_pm_opp *opp, unsigned long freq)
{
- struct opp_table *opp_table;
- unsigned long freq, old_freq, temp_freq;
- struct dev_pm_opp *old_opp, *opp;
+ struct dev_pm_opp *old_opp;
+ unsigned long old_freq;
int ret;
- opp_table = _find_opp_table(dev);
- if (IS_ERR(opp_table)) {
- dev_err(dev, "%s: device opp doesn't exist\n", __func__);
- return PTR_ERR(opp_table);
- }
-
- if (unlikely(!target_freq)) {
- ret = _disable_opp_table(dev, opp_table);
- goto put_opp_table;
- }
-
- freq = clk_round_rate(opp_table->clk, target_freq);
- if ((long)freq <= 0)
- freq = target_freq;
-
- /*
- * For IO devices which require an OPP on some platforms/SoCs
- * while just needing to scale the clock on some others
- * we look for empty OPP tables with just a clock handle and
- * scale only the clk. This makes dev_pm_opp_set_rate()
- * equivalent to a clk_set_rate()
- */
- if (!_get_opp_count(opp_table)) {
- ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
- goto put_opp_table;
- }
+ if (unlikely(!opp))
+ return _disable_opp_table(dev, opp_table);
/* Find the currently set OPP if we don't know already */
if (unlikely(!opp_table->current_opp))
_find_current_opp(dev, opp_table);
- temp_freq = freq;
- opp = _find_freq_ceil(opp_table, &temp_freq);
- if (IS_ERR(opp)) {
- ret = PTR_ERR(opp);
- dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
- __func__, freq, ret);
- goto put_opp_table;
- }
-
old_opp = opp_table->current_opp;
old_freq = old_opp->rate;
/* Return early if nothing to do */
if (opp_table->enabled && old_opp == opp) {
dev_dbg(dev, "%s: OPPs are same, nothing to do\n", __func__);
- ret = 0;
- goto put_opp;
+ return 0;
}
dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__,
@@ -1073,7 +1028,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
if (freq >= old_freq) {
ret = _set_required_opps(dev, opp_table, opp, true);
if (ret)
- goto put_opp;
+ return ret;
}
if (opp_table->set_opp) {
@@ -1107,8 +1062,69 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
}
}
-put_opp:
- dev_pm_opp_put(opp);
+ return ret;
+}
+
+/**
+ * dev_pm_opp_set_rate() - Configure new OPP based on frequency
+ * @dev: device for which we do this operation
+ * @target_freq: frequency to achieve
+ *
+ * This configures the power-supplies to the levels specified by the OPP
+ * corresponding to the target_freq, and programs the clock to a value <=
+ * target_freq, as rounded by clk_round_rate(). Device wanting to run at fmax
+ * provided by the opp, should have already rounded to the target OPP's
+ * frequency.
+ */
+int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+ struct opp_table *opp_table;
+ unsigned long freq = 0, temp_freq;
+ struct dev_pm_opp *opp = NULL;
+ int ret;
+
+ opp_table = _find_opp_table(dev);
+ if (IS_ERR(opp_table)) {
+ dev_err(dev, "%s: device's opp table doesn't exist\n", __func__);
+ return PTR_ERR(opp_table);
+ }
+
+ if (target_freq) {
+ /*
+ * For IO devices which require an OPP on some platforms/SoCs
+ * while just needing to scale the clock on some others
+ * we look for empty OPP tables with just a clock handle and
+ * scale only the clk. This makes dev_pm_opp_set_rate()
+ * equivalent to a clk_set_rate()
+ */
+ if (!_get_opp_count(opp_table)) {
+ ret = _generic_set_opp_clk_only(dev, opp_table->clk, target_freq);
+ goto put_opp_table;
+ }
+
+ freq = clk_round_rate(opp_table->clk, target_freq);
+ if ((long)freq <= 0)
+ freq = target_freq;
+
+ /*
+ * The clock driver may support finer resolution of the
+ * frequencies than the OPP table, don't update the frequency we
+ * pass to clk_set_rate() here.
+ */
+ temp_freq = freq;
+ opp = _find_freq_ceil(opp_table, &temp_freq);
+ if (IS_ERR(opp)) {
+ ret = PTR_ERR(opp);
+ dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
+ __func__, freq, ret);
+ goto put_opp_table;
+ }
+ }
+
+ ret = _set_opp(dev, opp_table, opp, freq);
+
+ if (target_freq)
+ dev_pm_opp_put(opp);
put_opp_table:
dev_pm_opp_put_opp_table(opp_table);
return ret;