Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 145 insertions, 0 deletions

diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
new file mode 100644
index 000000000000..731010e0e6f6
--- /dev/null
+++ b/drivers/parport/Kconfig
@@ -0,0 +1,145 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Parport configuration.
+#
+
+menu "Parallel port support"
+
+config PARPORT
+	tristate "Parallel port support"
+	---help---
+	  If you want to use devices connected to your machine's parallel port
+	  (the connector at the computer with 25 holes), e.g. printer, ZIP
+	  drive, PLIP link (Parallel Line Internet Protocol is mainly used to
+	  create a mini network by connecting the parallel ports of two local
+	  machines) etc., then you need to say Y here; please read
+	  <file:Documentation/parport.txt> and
+	  <file:drivers/parport/BUGS-parport>.
+
+	  For extensive information about drivers for many devices attaching
+	  to the parallel port see <http://www.torque.net/linux-pp.html> on
+	  the WWW.
+
+	  It is possible to share a single parallel port among several devices
+	  and it is safe to compile all the corresponding drivers into the
+	  kernel. To compile parallel port support as a module, choose M here:
+	  the module will be called parport.
+	  If you have more than one parallel port and want to specify which
+	  port and IRQ to be used by this driver at module load time, take a
+	  look at <file:Documentation/parport.txt>.
+
+	  If unsure, say Y.
+
+config PARPORT_PC
+	tristate "PC-style hardware"
+	depends on PARPORT && (!SPARC64 || PCI) && (!SPARC32 || BROKEN)
+	---help---
+	  You should say Y here if you have a PC-style parallel port. All
+	  IBM PC compatible computers and some Alphas have PC-style
+	  parallel ports.  PA-RISC owners should only say Y here if they
+	  have a SuperIO parallel port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called parport_pc.
+
+	  If unsure, say Y.
+
+config PARPORT_SERIAL
+	tristate "Multi-IO cards (parallel and serial)"
+	depends on SERIAL_8250 && PARPORT_PC && PCI
+	help
+	  This adds support for multi-IO PCI cards that have parallel and
+	  serial ports.  You should say Y or M here.  If you say M, the module
+	  will be called parport_serial.
+
+config PARPORT_PC_FIFO
+	bool "Use FIFO/DMA if available (EXPERIMENTAL)"
+	depends on PARPORT_PC && EXPERIMENTAL
+	help
+	  Many parallel port chipsets provide hardware that can speed up
+	  printing. Say Y here if you want to take advantage of that.
+
+	  As well as actually having a FIFO, or DMA capability, the kernel
+	  will need to know which IRQ the parallel port has.  By default,
+	  parallel port interrupts will not be used, and so neither will the
+	  FIFO.  See <file:Documentation/parport.txt> to find out how to
+	  specify which IRQ/DMA to use.
+
+config PARPORT_PC_SUPERIO
+	bool "SuperIO chipset support (EXPERIMENTAL)"
+	depends on PARPORT_PC && EXPERIMENTAL
+	help
+	  Saying Y here enables some probes for Super-IO chipsets in order to
+	  find out things like base addresses, IRQ lines and DMA channels.  It
+	  is safe to say N.
+
+config PARPORT_PC_PCMCIA
+	tristate "Support for PCMCIA management for PC-style ports"
+	depends on PARPORT!=n && (PCMCIA!=n && PARPORT_PC=m && PARPORT_PC || PARPORT_PC=y && PCMCIA)
+	help
+	  Say Y here if you need PCMCIA support for your PC-style parallel
+	  ports. If unsure, say N.
+
+config PARPORT_NOT_PC
+	bool
+
+config PARPORT_ARC
+	tristate "Archimedes hardware"
+	depends on ARM && PARPORT
+	select PARPORT_NOT_PC
+
+config PARPORT_AMIGA
+	tristate "Amiga builtin port"
+	depends on AMIGA && PARPORT
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port hardware on
+	  Amiga machines. This code is also available as a module (say M),
+	  called parport_amiga. If in doubt, saying N is the safe plan.
+
+config PARPORT_MFC3
+	tristate "Multiface III parallel port"
+	depends on ZORRO && PARPORT
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need parallel port support for the MFC3 card.
+	  This code is also available as a module (say M), called
+	  parport_mfc3. If in doubt, saying N is the safe plan.
+
+config PARPORT_ATARI
+	tristate "Atari hardware"
+	depends on ATARI && PARPORT
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port hardware on
+	  Atari machines. This code is also available as a module (say M),
+	  called parport_atari. If in doubt, saying N is the safe plan.
+
+config PARPORT_GSC
+	tristate
+	default GSC
+	depends on PARPORT
+
+config PARPORT_SUNBPP
+	tristate "Sparc hardware (EXPERIMENTAL)"
+	depends on SBUS && PARPORT && EXPERIMENTAL
+	select PARPORT_NOT_PC
+	help
+	  This driver provides support for the bidirectional parallel port
+	  found on many Sun machines. Note that many of the newer Ultras
+	  actually have pc style hardware instead.
+
+config PARPORT_1284
+	bool "IEEE 1284 transfer modes"
+	depends on PARPORT
+	help
+	  If you have a printer that supports status readback or device ID, or
+	  want to use a device that uses enhanced parallel port transfer modes
+	  such as EPP and ECP, say Y here to enable advanced IEEE 1284
+	  transfer modes. Also say Y if you want device ID information to
+	  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+
+endmenu
+