Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...

1 files changed, 86 insertions, 29 deletions

diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index ce1543a584a3..729d5a101d62 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -119,6 +119,10 @@ struct mvebu_pcie_port {
 	u32 port;
 	u32 lane;
 	int devfn;
+	unsigned int mem_target;
+	unsigned int mem_attr;
+	unsigned int io_target;
+	unsigned int io_attr;
 	struct clk *clk;
 	struct mvebu_sw_pci_bridge bridge;
 	struct device_node *dn;
@@ -303,10 +307,9 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
 			    (port->bridge.iolimitupper << 16)) -
 			    iobase);
 
-	mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base,
-					  port->iowin_size,
-					  iobase,
-					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr,
+					  port->iowin_base, port->iowin_size,
+					  iobase);
 
 	pci_ioremap_io(iobase, port->iowin_base);
 }
@@ -338,10 +341,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
 		(((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
 		port->memwin_base;
 
-	mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base,
-					  port->memwin_size,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr,
+				    port->memwin_base, port->memwin_size);
 }
 
 /*
@@ -636,6 +637,8 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 
 	for (i = 0; i < pcie->nports; i++) {
 		struct mvebu_pcie_port *port = &pcie->ports[i];
+		if (!port->base)
+			continue;
 		mvebu_pcie_setup_hw(port);
 	}
 
@@ -730,12 +733,54 @@ mvebu_pcie_map_registers(struct platform_device *pdev,
 	return devm_ioremap_resource(&pdev->dev, &regs);
 }
 
+#define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
+#define    DT_TYPE_IO                 0x1
+#define    DT_TYPE_MEM32              0x2
+#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
+#define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
+
+static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
+			      unsigned long type, int *tgt, int *attr)
+{
+	const int na = 3, ns = 2;
+	const __be32 *range;
+	int rlen, nranges, rangesz, pna, i;
+
+	range = of_get_property(np, "ranges", &rlen);
+	if (!range)
+		return -EINVAL;
+
+	pna = of_n_addr_cells(np);
+	rangesz = pna + na + ns;
+	nranges = rlen / sizeof(__be32) / rangesz;
+
+	for (i = 0; i < nranges; i++) {
+		u32 flags = of_read_number(range, 1);
+		u32 slot = of_read_number(range, 2);
+		u64 cpuaddr = of_read_number(range + na, pna);
+		unsigned long rtype;
+
+		if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
+			rtype = IORESOURCE_IO;
+		else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
+			rtype = IORESOURCE_MEM;
+
+		if (slot == PCI_SLOT(devfn) && type == rtype) {
+			*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
+			*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
+			return 0;
+		}
+
+		range += rangesz;
+	}
+
+	return -ENOENT;
+}
+
 static int __init mvebu_pcie_probe(struct platform_device *pdev)
 {
 	struct mvebu_pcie *pcie;
 	struct device_node *np = pdev->dev.of_node;
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
 	struct device_node *child;
 	int i, ret;
 
@@ -746,29 +791,25 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 
 	pcie->pdev = pdev;
 
-	if (of_pci_range_parser_init(&parser, np))
+	/* Get the PCIe memory and I/O aperture */
+	mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
+	if (resource_size(&pcie->mem) == 0) {
+		dev_err(&pdev->dev, "invalid memory aperture size\n");
 		return -EINVAL;
+	}
 
-	/* Get the I/O and memory ranges from DT */
-	for_each_of_pci_range(&parser, &range) {
-		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
-		if (restype == IORESOURCE_IO) {
-			of_pci_range_to_resource(&range, np, &pcie->io);
-			of_pci_range_to_resource(&range, np, &pcie->realio);
-			pcie->io.name = "I/O";
-			pcie->realio.start = max_t(resource_size_t,
-						   PCIBIOS_MIN_IO,
-						   range.pci_addr);
-			pcie->realio.end = min_t(resource_size_t,
-						 IO_SPACE_LIMIT,
-						 range.pci_addr + range.size);
-		}
-		if (restype == IORESOURCE_MEM) {
-			of_pci_range_to_resource(&range, np, &pcie->mem);
-			pcie->mem.name = "MEM";
-		}
+	mvebu_mbus_get_pcie_io_aperture(&pcie->io);
+	if (resource_size(&pcie->io) == 0) {
+		dev_err(&pdev->dev, "invalid I/O aperture size\n");
+		return -EINVAL;
 	}
 
+	pcie->realio.flags = pcie->io.flags;
+	pcie->realio.start = PCIBIOS_MIN_IO;
+	pcie->realio.end = min_t(resource_size_t,
+				  IO_SPACE_LIMIT,
+				  resource_size(&pcie->io));
+
 	/* Get the bus range */
 	ret = of_pci_parse_bus_range(np, &pcie->busn);
 	if (ret) {
@@ -816,6 +857,22 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 		if (port->devfn < 0)
 			continue;
 
+		ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_MEM,
+					 &port->mem_target, &port->mem_attr);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for mem window\n",
+				port->port, port->lane);
+			continue;
+		}
+
+		ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO,
+					 &port->io_target, &port->io_attr);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for io window\n",
+				port->port, port->lane);
+			continue;
+		}
+
 		port->base = mvebu_pcie_map_registers(pdev, child, port);
 		if (IS_ERR(port->base)) {
 			dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",