Merge branch 'remotes/lorenzo/pci/keystone'

  - Move IRQ register address computation inside macros (Kishon Vijay
    Abraham I)

  - Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I)

  - Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham
    I)

  - Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon
    Vijay Abraham I)

  - Add dwc support for platforms with custom MSI controllers (Kishon Vijay
    Abraham I)

  - Add keystone-specific MSI controller (Kishon Vijay Abraham I)

  - Remove dwc host_ops previously used for keystone-specific MSI (Kishon
    Vijay Abraham I)

  - Skip dwc default MSI init if platform has custom MSI controller (Kishon
    Vijay Abraham I)

  - Implement .start_link() and .stop_link() for keystone endpoint support
    (Kishon Vijay Abraham I)

  - Add keystone "reg-names" DT binding (Kishon Vijay Abraham I)

  - Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon
    Vijay Abraham I)

  - Get keystone register resources from DT by name, not index (Kishon
    Vijay Abraham I)

  - Get DT resources in .probe() to prepare for endpoint support (Kishon
    Vijay Abraham I)

  - Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration
    (Kishon Vijay Abraham I)

  - Explicitly set keystone to host mode (Kishon Vijay Abraham I)

  - Document DT "atu" reg-names requirement for DesignWare core >= 4.80
    (Kishon Vijay Abraham I)

  - Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon
    Vijay Abraham I)

  - Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon
    Vijay Abraham I)

  - Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham
    I)

  - Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham
    I)

  - Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I)

  - Reset keystone PHYs before enabling them (Kishon Vijay Abraham I)

  - Make of_pci_get_max_link_speed() available to endpoint drivers as well
    as host drivers (Kishon Vijay Abraham I)

  - Add keystone support for DT "max-link-speed" property (Kishon Vijay
    Abraham I)

  - Add endpoint library support for BAR buffer alignment (Kishon Vijay
    Abraham I)

  - Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I)

  - Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay
    Abraham I)

  - Add dwc hooks for dbi/dbi2 that share the same address space (Kishon
    Vijay Abraham I)

  - Add keystone support for TI AM654x in endpoint mode (Kishon Vijay
    Abraham I)

  - Configure designware endpoints to advertise smallest resizable BAR
    (1MB) (Kishon Vijay Abraham I)

  - Align designware endpoint ATU windows for raising MSIs (Kishon Vijay
    Abraham I)

  - Add endpoint test support for TI AM654x (Kishon Vijay Abraham I)

  - Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I)

* remotes/lorenzo/pci/keystone:
  misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test
  misc: pci_endpoint_test: Add support to test PCI EP in AM654x
  PCI: designware-ep: Use aligned ATU window for raising MSI interrupts
  PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size
  PCI: keystone: Add support for PCIe EP in AM654x Platforms
  dt-bindings: PCI: Add PCI EP DT binding documentation for AM654
  PCI: dwc: Add callbacks for accessing dbi2 address space
  PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset
  PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops
  PCI: endpoint: Add support to specify alignment for buffers allocated to BARs
  PCI: keystone: Add support to set the max link speed from DT
  PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
  PCI: keystone: Invoke phy_reset() API before enabling PHY
  PCI: keystone: Add support for PCIe RC in AM654x Platforms
  dt-bindings: PCI: Add PCI RC DT binding documentation for AM654
  PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64
  PCI: dwc: Fix ATU identification for designware version >= 4.80
  PCI: dwc: Enable iATU unroll for endpoint too
  dt-bindings: PCI: Document "atu" reg-names
  PCI: keystone: Explicitly set the PCIe mode
  dt-bindings: PCI: Add dt-binding to configure PCIe mode
  PCI: keystone: Move resources initialization to prepare for EP support
  PCI: keystone: Use platform_get_resource_byname() to get memory resources
  PCI: keystone: Perform host initialization in a single function
  dt-bindings: PCI: keystone: Add "reg-names" binding information
  PCI: keystone: Cleanup error_irq configuration
  PCI: keystone: Add start_link()/stop_link() dw_pcie_ops
  PCI: dwc: Remove default MSI initialization for platform specific MSI chips
  PCI: dwc: Remove Keystone specific dw_pcie_host_ops
  PCI: keystone: Use Keystone specific msi_irq_chip
  PCI: dwc: Add support to use non default msi_irq_chip
  PCI: keystone: Cleanup ks_pcie_msi_irq_handler()
  PCI: keystone: Use hwirq to get the MSI IRQ number offset
  PCI: keystone: Add separate functions for configuring MSI and legacy interrupt
  PCI: keystone: Cleanup interrupt related macros

# Conflicts:
#	drivers/pci/controller/dwc/pcie-designware.h

1 files changed, 23 insertions, 21 deletions

diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 67376cf45880..73d5adec0a28 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -15,6 +15,7 @@
 #include <linux/of_pci.h>
 #include "pci.h"
 
+#ifdef CONFIG_PCI
 void pci_set_of_node(struct pci_dev *dev)
 {
 	if (!dev->bus->dev.of_node)
@@ -203,27 +204,6 @@ int of_get_pci_domain_nr(struct device_node *node)
 EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
 
 /**
- * This function will try to find the limitation of link speed by finding
- * a property called "max-link-speed" of the given device node.
- *
- * @node: device tree node with the max link speed information
- *
- * Returns the associated max link speed from DT, or a negative value if the
- * required property is not found or is invalid.
- */
-int of_pci_get_max_link_speed(struct device_node *node)
-{
-	u32 max_link_speed;
-
-	if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
-	    max_link_speed > 4)
-		return -EINVAL;
-
-	return max_link_speed;
-}
-EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);
-
-/**
  * of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only
  *                           is present and valid
  */
@@ -543,3 +523,25 @@ int pci_parse_request_of_pci_ranges(struct device *dev,
 	return err;
 }
 
+#endif /* CONFIG_PCI */
+
+/**
+ * This function will try to find the limitation of link speed by finding
+ * a property called "max-link-speed" of the given device node.
+ *
+ * @node: device tree node with the max link speed information
+ *
+ * Returns the associated max link speed from DT, or a negative value if the
+ * required property is not found or is invalid.
+ */
+int of_pci_get_max_link_speed(struct device_node *node)
+{
+	u32 max_link_speed;
+
+	if (of_property_read_u32(node, "max-link-speed", &max_link_speed) ||
+	    max_link_speed > 4)
+		return -EINVAL;
+
+	return max_link_speed;
+}
+EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed);