Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate interrupt related code in irq.c (Ilpo Järvinen)

   - Reduce kernel size by replacing sysfs resource macros with
     functions (Ilpo Järvinen)

   - Reduce kernel size by compiling sysfs support only when
     CONFIG_SYSFS=y (Lukas Wunner)

   - Avoid using Extended Tags on 3ware-9650SE Root Port to work around
     an apparent hardware defect (Jörg Wedekind)

  Resource management:

   - Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)

   - Move pci_iomap.c and other PCI-specific devres code to drivers/pci
     (Philipp Stanner)

   - Consolidate PCI devres code in devres.c (Philipp Stanner)

  Power management:

   - Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
     know how to return correctly to D0, and remove previous quirk that
     wasn't as specific (Daniel Drake)

   - Allow runtime PM when the driver enables it but doesn't need any
     runtime PM callbacks (Raag Jadav)

   - Drain runtime-idle callbacks before driver removal to avoid races
     between .remove() and .runtime_idle(), which caused intermittent
     page faults when the rtsx .runtime_idle() accessed registers that
     its .remove() had already unmapped (Rafael J. Wysocki)

  Virtualization:

   - Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
     with VFIO, e.g., for professional audio software on many Apple
     machines, at the cost of leaking state between VMs (Edmund Raile)

  Error handling:

   - Print all logged TLP Prefixes, not just the first, after AER or DPC
     errors (Ilpo Järvinen)

   - Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
     still don't advertise a legal size (Paul Menzel)

   - Ignore expected DPC Surprise Down errors on hot removal (Smita
     Koralahalli)

   - Block runtime suspend while handling AER errors to avoid races that
     prevent the device form being resumed from D3hot (Stanislaw
     Gruszka)

  Peer-to-peer DMA:

   - Use atomic XA allocation in RCU read section (Christophe JAILLET)

  ASPM:

   - Collect bits of ASPM-related code that we need even without
     CONFIG_PCIEASPM into aspm.c (David E. Box)

   - Save/restore L1 PM Substates config for suspend/resume (David E.
     Box)

   - Update save_save when ASPM config is changed, so a .slot_reset()
     during error recovery restores the changed config, not the
     .probe()-time config (Vidya Sagar)

  Endpoint framework:

   - Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)

   - Clean up endpoint BAR descriptions (Niklas Cassel)

   - Fix ntb_register_device() name leak in error path (Yang Yingliang)

   - Return actual error code for pci_vntb_probe() failure (Yang
     Yingliang)

  Broadcom STB PCIe controller driver:

   - Fix MDIO write polling, which previously never waited for
     completion (Jonathan Bell)

  Cadence PCIe endpoint driver:

   - Clear the ARI "Next Function Number" of last function (Jasko-EXT
     Wojciech)

  Freescale i.MX6 PCIe controller driver:

   - Simplify by replacing switch statements with function pointers for
     different hardware variants (Frank Li)

   - Simplify by using clk_bulk*() API (Frank Li)

   - Remove redundant DT clock and reg/reg-name details (Frank Li)

   - Add i.MX95 DT and driver support for both Root Complex and Endpoint
     mode (Frank Li)

  Microsoft Hyper-V host bridge driver:

   - Reduce memory usage by limiting ring buffer size to 16KB instead of
     4 pages (Michael Kelley)

  Qualcomm PCIe controller driver:

   - Add X1E80100 DT and driver support (Abel Vesa)

   - Add DT 'required-opps' for SoCs that require a minimum performance
     level (Johan Hovold)

   - Make DT 'msi-map-mask' optional, depending on how MSI interrupts
     are mapped (Johan Hovold)

   - Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
     configuration isn't tuned correctly for L0s (Johan Hovold)

   - Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
     separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
     SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
     Kozlowski)

   - Enable BDF to SID translation by disabling bypass mode (Manivannan
     Sadhasivam)

   - Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
     Sarkar)

  Synopsys DesignWare PCIe controller driver:

   - Allocate 64-bit MSI address if no 32-bit address is available (Ajay
     Agarwal)

   - Fix endpoint Resizable BAR to actually advertise the required 1MB
     size (Niklas Cassel)

  MicroSemi Switchtec management driver:

   - Release resources if the .probe() fails (Christophe JAILLET)

  Miscellaneous:

   - Make pcie_port_bus_type const (Ricardo B. Marliere)"

* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
  PCI/ASPM: Update save_state when configuration changes
  PCI/ASPM: Disable L1 before configuring L1 Substates
  PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
  PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
  PCI: hv: Fix ring buffer size calculation
  PCI: dwc: endpoint: Fix advertised resizable BAR size
  PCI: cadence: Clear the ARI Capability Next Function Number of the last function
  PCI: dwc: Strengthen the MSI address allocation logic
  PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
  PCI: qcom: Add X1E80100 PCIe support
  dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
  PCI: qcom: Enable BDF to SID translation properly
  PCI/AER: Generalize TLP Header Log reading
  PCI/AER: Use explicit register size for PCI_ERR_CAP
  PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
  dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
  dt-bindings: PCI: qcom: Allow 'required-opps'
  PCI/AER: Block runtime suspend when handling errors
  PCI/ASPM: Move pci_save_ltr_state() to aspm.c
  PCI/ASPM: Always build aspm.c
  ...

1 files changed, 48 insertions, 7 deletions

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index bfc56f7bee1c..17fed1846847 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -31,9 +31,6 @@ bool pcie_cap_has_rtctl(const struct pci_dev *dev);
 
 /* Functions internal to the PCI core code */
 
-int pci_create_sysfs_dev_files(struct pci_dev *pdev);
-void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
-void pci_cleanup_rom(struct pci_dev *dev);
 #ifdef CONFIG_DMI
 extern const struct attribute_group pci_dev_smbios_attr_group;
 #endif
@@ -97,7 +94,6 @@ void pci_msi_init(struct pci_dev *dev);
 void pci_msix_init(struct pci_dev *dev);
 bool pci_bridge_d3_possible(struct pci_dev *dev);
 void pci_bridge_d3_update(struct pci_dev *dev);
-void pci_bridge_reconfigure_ltr(struct pci_dev *dev);
 int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type);
 
 static inline void pci_wakeup_event(struct pci_dev *dev)
@@ -152,7 +148,7 @@ static inline int pci_proc_detach_bus(struct pci_bus *bus) { return 0; }
 /* Functions for PCI Hotplug drivers to use */
 int pci_hp_add_bridge(struct pci_dev *dev);
 
-#ifdef HAVE_PCI_LEGACY
+#if defined(CONFIG_SYSFS) && defined(HAVE_PCI_LEGACY)
 void pci_create_legacy_files(struct pci_bus *bus);
 void pci_remove_legacy_files(struct pci_bus *bus);
 #else
@@ -185,10 +181,22 @@ static inline int pci_no_d1d2(struct pci_dev *dev)
 	return (dev->no_d1d2 || parent_dstates);
 
 }
+
+#ifdef CONFIG_SYSFS
+int pci_create_sysfs_dev_files(struct pci_dev *pdev);
+void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
 extern const struct attribute_group *pci_dev_groups[];
+extern const struct attribute_group *pci_dev_attr_groups[];
 extern const struct attribute_group *pcibus_groups[];
-extern const struct device_type pci_dev_type;
 extern const struct attribute_group *pci_bus_groups[];
+#else
+static inline int pci_create_sysfs_dev_files(struct pci_dev *pdev) { return 0; }
+static inline void pci_remove_sysfs_dev_files(struct pci_dev *pdev) { }
+#define pci_dev_groups NULL
+#define pci_dev_attr_groups NULL
+#define pcibus_groups NULL
+#define pci_bus_groups NULL
+#endif
 
 extern unsigned long pci_hotplug_io_size;
 extern unsigned long pci_hotplug_mmio_size;
@@ -404,7 +412,7 @@ struct aer_err_info {
 
 	unsigned int status;		/* COR/UNCOR Error Status */
 	unsigned int mask;		/* COR/UNCOR Error Mask */
-	struct aer_header_log_regs tlp;	/* TLP Header */
+	struct pcie_tlp_log tlp;	/* TLP Header */
 };
 
 int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info);
@@ -563,16 +571,28 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 
 bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
 int pcie_retrain_link(struct pci_dev *pdev, bool use_lt);
+
+/* ASPM-related functionality we need even without CONFIG_PCIEASPM */
+void pci_save_ltr_state(struct pci_dev *dev);
+void pci_restore_ltr_state(struct pci_dev *dev);
+void pci_configure_aspm_l1ss(struct pci_dev *dev);
+void pci_save_aspm_l1ss_state(struct pci_dev *dev);
+void pci_restore_aspm_l1ss_state(struct pci_dev *dev);
+
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
 void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked);
 void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
+void pci_configure_ltr(struct pci_dev *pdev);
+void pci_bridge_reconfigure_ltr(struct pci_dev *pdev);
 #else
 static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
 static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
 static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { }
 static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
+static inline void pci_configure_ltr(struct pci_dev *pdev) { }
+static inline void pci_bridge_reconfigure_ltr(struct pci_dev *pdev) { }
 #endif
 
 #ifdef CONFIG_PCIE_ECRC
@@ -793,6 +813,27 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
 #endif
 
 /*
+ * Managed PCI resources.  This manages device on/off, INTx/MSI/MSI-X
+ * on/off and BAR regions.  pci_dev itself records MSI/MSI-X status, so
+ * there's no need to track it separately.  pci_devres is initialized
+ * when a device is enabled using managed PCI device enable interface.
+ *
+ * TODO: Struct pci_devres and find_pci_dr() only need to be here because
+ * they're used in pci.c.  Port or move these functions to devres.c and
+ * then remove them from here.
+ */
+struct pci_devres {
+	unsigned int enabled:1;
+	unsigned int pinned:1;
+	unsigned int orig_intx:1;
+	unsigned int restore_intx:1;
+	unsigned int mwi:1;
+	u32 region_mask;
+};
+
+struct pci_devres *find_pci_dr(struct pci_dev *pdev);
+
+/*
  * Config Address for PCI Configuration Mechanism #1
  *
  * See PCI Local Bus Specification, Revision 3.0,