Merge tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Omap fixes and minor defconfig updates that would be good to
get in before -rc1.

* tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
  ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
  ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
  ARM: OMAP2+: devices: remove duplicated include from devices.c
  ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
  ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
  ARM: OMAP2+: Remove obsolete Makefile line
  ARM: OMAP5: Enable Cortex A15 errata 798181
  ARM: scu: provide inline dummy functions when SCU is not present
  ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4
  ARM: OMAP2+: timer: initialize before using oh_name

Signed-off-by: Olof Johansson <olof@lixom.net>

Add/move/change conflicts in arch/arm/mach-omap2/Kconfig resolved.

1 files changed, 29 insertions, 4 deletions

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7d68aeebf56b..e85d23044ae0 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1022,6 +1022,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
 
 /*
  *	Serverworks CSB5 IDE does not fully support native mode
@@ -1832,7 +1834,6 @@ static void quirk_e100_interrupt(struct pci_dev *dev)
 	u16 command, pmcsr;
 	u8 __iomem *csr;
 	u8 cmd_hi;
-	int pm;
 
 	switch (dev->device) {
 	/* PCI IDs taken from drivers/net/e100.c */
@@ -1870,9 +1871,8 @@ static void quirk_e100_interrupt(struct pci_dev *dev)
 	 * Check that the device is in the D0 power state. If it's not,
 	 * there is no point to look any further.
 	 */
-	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-	if (pm) {
-		pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+	if (dev->pm_cap) {
+		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
 			return;
 	}
@@ -2865,6 +2865,31 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
 
 
+/*
+ * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.  To
+ * work around this, query the size it should be configured to by the device and
+ * modify the resource end to correspond to this new size.
+ */
+static void quirk_intel_ntb(struct pci_dev *dev)
+{
+	int rc;
+	u8 val;
+
+	rc = pci_read_config_byte(dev, 0x00D0, &val);
+	if (rc)
+		return;
+
+	dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1;
+
+	rc = pci_read_config_byte(dev, 0x00D1, &val);
+	if (rc)
+		return;
+
+	dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
+
 static ktime_t fixup_debug_start(struct pci_dev *dev,
 				 void (*fn)(struct pci_dev *dev))
 {