Merge commit 'v2.6.26' into bkl-removal

14 files changed, 292 insertions, 96 deletions

diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index ec8f7002b09d..39bb96b413ef 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -178,8 +178,7 @@ static int pci_vpd_pci22_read(struct pci_dev *dev, int pos, int size,
 	int ret;
 	int begin, end, i;
 
-	if (pos < 0 || pos > PCI_VPD_PCI22_SIZE ||
-	    size > PCI_VPD_PCI22_SIZE  - pos)
+	if (pos < 0 || pos > vpd->base.len || size > vpd->base.len  - pos)
 		return -EINVAL;
 	if (size == 0)
 		return 0;
@@ -223,8 +222,8 @@ static int pci_vpd_pci22_write(struct pci_dev *dev, int pos, int size,
 	u32 val;
 	int ret;
 
-	if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || pos & 3 ||
-	    size > PCI_VPD_PCI22_SIZE - pos || size < 4)
+	if (pos < 0 || pos > vpd->base.len || pos & 3 ||
+	    size > vpd->base.len - pos || size < 4)
 		return -EINVAL;
 
 	val = (u8) *buf++;
@@ -255,11 +254,6 @@ out:
 	return 4;
 }
 
-static int pci_vpd_pci22_get_size(struct pci_dev *dev)
-{
-	return PCI_VPD_PCI22_SIZE;
-}
-
 static void pci_vpd_pci22_release(struct pci_dev *dev)
 {
 	kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
@@ -268,7 +262,6 @@ static void pci_vpd_pci22_release(struct pci_dev *dev)
 static struct pci_vpd_ops pci_vpd_pci22_ops = {
 	.read = pci_vpd_pci22_read,
 	.write = pci_vpd_pci22_write,
-	.get_size = pci_vpd_pci22_get_size,
 	.release = pci_vpd_pci22_release,
 };
 
@@ -284,6 +277,7 @@ int pci_vpd_pci22_init(struct pci_dev *dev)
 	if (!vpd)
 		return -ENOMEM;
 
+	vpd->base.len = PCI_VPD_PCI22_SIZE;
 	vpd->base.ops = &pci_vpd_pci22_ops;
 	spin_lock_init(&vpd->lock);
 	vpd->cap = cap;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 648596d469f6..91156f85a926 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -700,9 +700,10 @@ cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
 				cleanup_p2p_bridge, NULL, NULL);
 
-	if (!(bridge = acpiphp_handle_to_bridge(handle)))
-		return AE_OK;
-	cleanup_bridge(bridge);
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (bridge)
+		cleanup_bridge(bridge);
+
 	return AE_OK;
 }
 
@@ -715,9 +716,19 @@ static void remove_bridge(acpi_handle handle)
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
 				(u32)1, cleanup_p2p_bridge, NULL, NULL);
 
+	/*
+	 * On root bridges with hotplug slots directly underneath (ie,
+	 * no p2p bridge inbetween), we call cleanup_bridge(). 
+	 *
+	 * The else clause cleans up root bridges that either had no
+	 * hotplug slots at all, or had a p2p bridge underneath.
+	 */
 	bridge = acpiphp_handle_to_bridge(handle);
 	if (bridge)
 		cleanup_bridge(bridge);
+	else
+		acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+					   handle_hotplug_event_bridge);
 }
 
 static struct pci_dev * get_apic_pci_info(acpi_handle handle)
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 925ba16355ce..a11021e8ce37 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -619,6 +619,7 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
 int pci_hp_register (struct hotplug_slot *slot)
 {
 	int result;
+	struct hotplug_slot *tmp;
 
 	if (slot == NULL)
 		return -ENODEV;
@@ -630,7 +631,11 @@ int pci_hp_register (struct hotplug_slot *slot)
 		return -EINVAL;
 	}
 
-	/* this can fail if we have already registered a slot with the same name */
+	/* Check if we have already registered a slot with the same name. */
+	tmp = get_slot_from_name(slot->name);
+	if (tmp)
+		return -EEXIST;
+
 	slot->kobj.kset = pci_hotplug_slots_kset;
 	result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL,
 				      "%s", slot->name);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 8264a7680435..79c9ddaad3fb 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -97,6 +97,7 @@ struct controller {
 	u8 cap_base;
 	struct timer_list poll_timer;
 	volatile int cmd_busy;
+	unsigned int no_cmd_complete:1;
 };
 
 #define INT_BUTTON_IGNORE		0
@@ -135,6 +136,7 @@ struct controller {
 #define PWR_LED_PRSN	0x00000010
 #define HP_SUPR_RM_SUP	0x00000020
 #define EMI_PRSN	0x00020000
+#define NO_CMD_CMPL_SUP	0x00040000
 
 #define ATTN_BUTTN(ctrl)	((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
 #define POWER_CTRL(ctrl)	((ctrl)->slot_cap & PWR_CTRL_PRSN)
@@ -143,13 +145,14 @@ struct controller {
 #define PWR_LED(ctrl)		((ctrl)->slot_cap & PWR_LED_PRSN)
 #define HP_SUPR_RM(ctrl)	((ctrl)->slot_cap & HP_SUPR_RM_SUP)
 #define EMI(ctrl)		((ctrl)->slot_cap & EMI_PRSN)
+#define NO_CMD_CMPL(ctrl)	((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
 
 extern int pciehp_sysfs_enable_slot(struct slot *slot);
 extern int pciehp_sysfs_disable_slot(struct slot *slot);
-extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_attention_button(struct slot *p_slot);
+  extern u8 pciehp_handle_switch_change(struct slot *p_slot);
+extern u8 pciehp_handle_presence_change(struct slot *p_slot);
+extern u8 pciehp_handle_power_fault(struct slot *p_slot);
 extern int pciehp_configure_device(struct slot *p_slot);
 extern int pciehp_unconfigure_device(struct slot *p_slot);
 extern void pciehp_queue_pushbutton_work(struct work_struct *work);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 43d8ddb2d679..48a2ed378914 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -254,7 +254,11 @@ static int init_slots(struct controller *ctrl)
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
 		retval = pci_hp_register(hotplug_slot);
 		if (retval) {
-			err ("pci_hp_register failed with error %d\n", retval);
+			err("pci_hp_register failed with error %d\n", retval);
+			if (retval == -EEXIST)
+				err("Failed to register slot because of name "
+				    "collision. Try \'pciehp_slot_with_bus\' "
+				    "module option.\n");
 			goto error_info;
 		}
 		/* create additional sysfs entries */
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 0a7aa628e955..96a5d55a4983 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -55,16 +55,13 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type)
 	return 0;
 }
 
-u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_attention_button(struct slot *p_slot)
 {
-	struct slot *p_slot;
 	u32 event_type;
 
 	/* Attention Button Change */
 	dbg("pciehp:  Attention button interrupt received.\n");
 
-	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
 	/*
 	 *  Button pressed - See if need to TAKE ACTION!!!
 	 */
@@ -76,18 +73,15 @@ u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
 	return 0;
 }
 
-u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_switch_change(struct slot *p_slot)
 {
-	struct slot *p_slot;
 	u8 getstatus;
 	u32 event_type;
 
 	/* Switch Change */
 	dbg("pciehp:  Switch interrupt received.\n");
 
-	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-
 	if (getstatus) {
 		/*
 		 * Switch opened
@@ -107,17 +101,14 @@ u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
 	return 1;
 }
 
-u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_presence_change(struct slot *p_slot)
 {
-	struct slot *p_slot;
 	u32 event_type;
 	u8 presence_save;
 
 	/* Presence Change */
 	dbg("pciehp:  Presence/Notify input change.\n");
 
-	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
 	/* Switch is open, assume a presence change
 	 * Save the presence state
 	 */
@@ -141,16 +132,13 @@ u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
 	return 1;
 }
 
-u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_power_fault(struct slot *p_slot)
 {
-	struct slot *p_slot;
 	u32 event_type;
 
 	/* power fault */
 	dbg("pciehp:  Power fault interrupt received.\n");
 
-	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
 	if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
 		/*
 		 * power fault Cleared
@@ -163,7 +151,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
 		 */
 		info("Power fault on Slot(%s)\n", p_slot->name);
 		event_type = INT_POWER_FAULT;
-		info("power fault bit %x set\n", hp_slot);
+		info("power fault bit %x set\n", 0);
 	}
 
 	queue_interrupt_event(p_slot, event_type);
@@ -186,6 +174,13 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot)
 		}
 	}
 
+	/*
+	 * After turning power off, we must wait for at least 1 second
+	 * before taking any action that relies on power having been
+	 * removed from the slot/adapter.
+	 */
+	msleep(1000);
+
 	if (PWR_LED(ctrl))
 		pslot->hpc_ops->green_led_off(pslot);
 
@@ -289,6 +284,13 @@ static int remove_board(struct slot *p_slot)
 		}
 	}
 
+	/*
+	 * After turning power off, we must wait for at least 1 second
+	 * before taking any action that relies on power having been
+	 * removed from the slot/adapter.
+	 */
+	msleep(1000);
+
 	if (PWR_LED(ctrl))
 		/* turn off Green LED */
 		p_slot->hpc_ops->green_led_off(p_slot);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 891f81a0400c..79f104963166 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -247,14 +247,38 @@ static inline void pciehp_free_irq(struct controller *ctrl)
 		free_irq(ctrl->pci_dev->irq, ctrl);
 }
 
-static inline int pcie_wait_cmd(struct controller *ctrl)
+static inline int pcie_poll_cmd(struct controller *ctrl)
+{
+	u16 slot_status;
+	int timeout = 1000;
+
+	if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+		if (slot_status & CMD_COMPLETED)
+			goto completed;
+	for (timeout = 1000; timeout > 0; timeout -= 100) {
+		msleep(100);
+		if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+			if (slot_status & CMD_COMPLETED)
+				goto completed;
+	}
+	return 0;	/* timeout */
+
+completed:
+	pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+	return timeout;
+}
+
+static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
 {
 	int retval = 0;
 	unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
 	unsigned long timeout = msecs_to_jiffies(msecs);
 	int rc;
 
-	rc = wait_event_interruptible_timeout(ctrl->queue,
+	if (poll)
+		rc = pcie_poll_cmd(ctrl);
+	else
+		rc = wait_event_interruptible_timeout(ctrl->queue,
 					      !ctrl->cmd_busy, timeout);
 	if (!rc)
 		dbg("Command not completed in 1000 msec\n");
@@ -286,12 +310,28 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
 		goto out;
 	}
 
-	if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) {
-		/* After 1 sec and CMD_COMPLETED still not set, just
-		   proceed forward to issue the next command according
-		   to spec.  Just print out the error message */
-		dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
-		    __func__);
+	if (slot_status & CMD_COMPLETED) {
+		if (!ctrl->no_cmd_complete) {
+			/*
+			 * After 1 sec and CMD_COMPLETED still not set, just
+			 * proceed forward to issue the next command according
+			 * to spec. Just print out the error message.
+			 */
+			dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
+			    __func__);
+		} else if (!NO_CMD_CMPL(ctrl)) {
+			/*
+			 * This controller semms to notify of command completed
+			 * event even though it supports none of power
+			 * controller, attention led, power led and EMI.
+			 */
+			dbg("%s: Unexpected CMD_COMPLETED. Need to wait for "
+			    "command completed event.\n", __func__);
+			ctrl->no_cmd_complete = 0;
+		} else {
+			dbg("%s: Unexpected CMD_COMPLETED. Maybe the "
+			    "controller is broken.\n", __func__);
+		}
 	}
 
 	retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
@@ -315,8 +355,18 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
 	/*
 	 * Wait for command completion.
 	 */
-	if (!retval)
-		retval = pcie_wait_cmd(ctrl);
+	if (!retval && !ctrl->no_cmd_complete) {
+		int poll = 0;
+		/*
+		 * if hotplug interrupt is not enabled or command
+		 * completed interrupt is not enabled, we need to poll
+		 * command completed event.
+		 */
+		if (!(slot_ctrl & HP_INTR_ENABLE) ||
+		    !(slot_ctrl & CMD_CMPL_INTR_ENABLE))
+			poll = 1;
+                retval = pcie_wait_cmd(ctrl, poll);
+	}
  out:
 	mutex_unlock(&ctrl->ctrl_lock);
 	return retval;
@@ -704,13 +754,6 @@ static int hpc_power_off_slot(struct slot * slot)
 	}
 	dbg("%s: SLOTCTRL %x write cmd %x\n",
 	    __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
-
-	/*
-	 * After turning power off, we must wait for at least 1 second
-	 * before taking any action that relies on power having been
-	 * removed from the slot/adapter.
-	 */
-	msleep(1000);
  out:
 	if (changed)
 		pcie_unmask_bad_dllp(ctrl);
@@ -722,6 +765,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 {
 	struct controller *ctrl = (struct controller *)dev_id;
 	u16 detected, intr_loc;
+	struct slot *p_slot;
 
 	/*
 	 * In order to guarantee that all interrupt events are
@@ -756,21 +800,38 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 		wake_up_interruptible(&ctrl->queue);
 	}
 
+	if (!(intr_loc & ~CMD_COMPLETED))
+		return IRQ_HANDLED;
+
+	/*
+	 * Return without handling events if this handler routine is
+	 * called before controller initialization is done. This may
+	 * happen if hotplug event or another interrupt that shares
+	 * the IRQ with pciehp arrives before slot initialization is
+	 * done after interrupt handler is registered.
+	 *
+	 * FIXME - Need more structural fixes. We need to be ready to
+	 * handle the event before installing interrupt handler.
+	 */
+	p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+	if (!p_slot || !p_slot->hpc_ops)
+		return IRQ_HANDLED;
+
 	/* Check MRL Sensor Changed */
 	if (intr_loc & MRL_SENS_CHANGED)
-		pciehp_handle_switch_change(0, ctrl);
+		pciehp_handle_switch_change(p_slot);
 
 	/* Check Attention Button Pressed */
 	if (intr_loc & ATTN_BUTTN_PRESSED)
-		pciehp_handle_attention_button(0, ctrl);
+		pciehp_handle_attention_button(p_slot);
 
 	/* Check Presence Detect Changed */
 	if (intr_loc & PRSN_DETECT_CHANGED)
-		pciehp_handle_presence_change(0, ctrl);
+		pciehp_handle_presence_change(p_slot);
 
 	/* Check Power Fault Detected */
 	if (intr_loc & PWR_FAULT_DETECTED)
-		pciehp_handle_power_fault(0, ctrl);
+		pciehp_handle_power_fault(p_slot);
 
 	return IRQ_HANDLED;
 }
@@ -1028,6 +1089,12 @@ static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
 static int pcie_init_hardware_part1(struct controller *ctrl,
 				    struct pcie_device *dev)
 {
+	/* Clear all remaining event bits in Slot Status register */
+	if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
+		err("%s: Cannot write to SLOTSTATUS register\n", __func__);
+		return -1;
+	}
+
 	/* Mask Hot-plug Interrupt Enable */
 	if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
 		err("%s: Cannot mask hotplug interrupt enable\n", __func__);
@@ -1040,16 +1107,6 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev)
 {
 	u16 cmd, mask;
 
-	/*
-	 * We need to clear all events before enabling hotplug interrupt
-	 * notification mechanism in order for hotplug controler to
-	 * generate interrupts.
-	 */
-	if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
-		err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
-		return -1;
-	}
-
 	cmd = PRSN_DETECT_ENABLE;
 	if (ATTN_BUTTN(ctrl))
 		cmd |= ATTN_BUTTN_ENABLE;
@@ -1116,6 +1173,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
 	dbg("  Power Indicator      : %3s\n", PWR_LED(ctrl)    ? "yes" : "no");
 	dbg("  Hot-Plug Surprise    : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
 	dbg("  EMI Present          : %3s\n", EMI(ctrl)        ? "yes" : "no");
+	dbg("  Comamnd Completed    : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
 	pciehp_readw(ctrl, SLOTSTATUS, &reg16);
 	dbg("Slot Status            : 0x%04x\n", reg16);
 	pciehp_readw(ctrl, SLOTSTATUS, &reg16);
@@ -1147,6 +1205,15 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev)
 	mutex_init(&ctrl->ctrl_lock);
 	init_waitqueue_head(&ctrl->queue);
 	dbg_ctrl(ctrl);
+	/*
+	 * Controller doesn't notify of command completion if the "No
+	 * Command Completed Support" bit is set in Slot Capability
+	 * register or the controller supports none of power
+	 * controller, attention led, power led and EMI.
+	 */
+	if (NO_CMD_CMPL(ctrl) ||
+	    !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
+	    ctrl->no_cmd_complete = 1;
 
 	info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
 	     pdev->vendor, pdev->device,
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index e32148a8fa12..779c5db71be4 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -18,8 +18,12 @@
 #include "rpadlpar.h"
 
 #define DLPAR_KOBJ_NAME       "control"
-#define ADD_SLOT_ATTR_NAME    "add_slot"
-#define REMOVE_SLOT_ATTR_NAME "remove_slot"
+
+/* Those two have no quotes because they are passed to __ATTR() which
+ * stringifies the argument (yuck !)
+ */
+#define ADD_SLOT_ATTR_NAME    add_slot
+#define REMOVE_SLOT_ATTR_NAME remove_slot
 
 #define MAX_DRC_NAME_LEN 64
 
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 1648076600fc..97848654652a 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -162,6 +162,10 @@ static int init_slots(struct controller *ctrl)
 		retval = pci_hp_register(slot->hotplug_slot);
 		if (retval) {
 			err("pci_hp_register failed with error %d\n", retval);
+			if (retval == -EEXIST)
+				err("Failed to register slot because of name "
+                                    "collision. Try \'shpchp_slot_with_bus\' "
+				    "module option.\n");
 			goto error_info;
 		}
 
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 72cf61ed8f96..e1637bd82b8e 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -181,7 +181,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
 	   any need to change it. */
 	struct mempolicy *oldpol;
 	cpumask_t oldmask = current->cpus_allowed;
-	int node = pcibus_to_node(dev->bus);
+	int node = dev_to_node(&dev->dev);
 
 	if (node >= 0) {
 		node_to_cpumask_ptr(nodecpumask, node);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 271d41cc05ab..9c718583a237 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -489,13 +489,13 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr,
  * @kobj: kobject for mapping
  * @attr: struct bin_attribute for the file being mapped
  * @vma: struct vm_area_struct passed into the mmap
+ * @write_combine: 1 for write_combine mapping
  *
  * Use the regular PCI mapping routines to map a PCI resource into userspace.
- * FIXME: write combining?  maybe automatic for prefetchable regions?
  */
 static int
 pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
-		  struct vm_area_struct *vma)
+		  struct vm_area_struct *vma, int write_combine)
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
 						       struct device, kobj));
@@ -518,7 +518,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
 	vma->vm_pgoff += start >> PAGE_SHIFT;
 	mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
 
-	return pci_mmap_page_range(pdev, vma, mmap_type, 0);
+	return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
+}
+
+static int
+pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr,
+		     struct vm_area_struct *vma)
+{
+	return pci_mmap_resource(kobj, attr, vma, 0);
+}
+
+static int
+pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr,
+		     struct vm_area_struct *vma)
+{
+	return pci_mmap_resource(kobj, attr, vma, 1);
 }
 
 /**
@@ -541,9 +555,46 @@ pci_remove_resource_files(struct pci_dev *pdev)
 			sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
 			kfree(res_attr);
 		}
+
+		res_attr = pdev->res_attr_wc[i];
+		if (res_attr) {
+			sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+			kfree(res_attr);
+		}
 	}
 }
 
+static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
+{
+	/* allocate attribute structure, piggyback attribute name */
+	int name_len = write_combine ? 13 : 10;
+	struct bin_attribute *res_attr;
+	int retval;
+
+	res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC);
+	if (res_attr) {
+		char *res_attr_name = (char *)(res_attr + 1);
+
+		if (write_combine) {
+			pdev->res_attr_wc[num] = res_attr;
+			sprintf(res_attr_name, "resource%d_wc", num);
+			res_attr->mmap = pci_mmap_resource_wc;
+		} else {
+			pdev->res_attr[num] = res_attr;
+			sprintf(res_attr_name, "resource%d", num);
+			res_attr->mmap = pci_mmap_resource_uc;
+		}
+		res_attr->attr.name = res_attr_name;
+		res_attr->attr.mode = S_IRUSR | S_IWUSR;
+		res_attr->size = pci_resource_len(pdev, num);
+		res_attr->private = &pdev->resource[num];
+		retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+	} else
+		retval = -ENOMEM;
+
+	return retval;
+}
+
 /**
  * pci_create_resource_files - create resource files in sysfs for @dev
  * @dev: dev in question
@@ -557,31 +608,19 @@ static int pci_create_resource_files(struct pci_dev *pdev)
 
 	/* Expose the PCI resources from this device as files */
 	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		struct bin_attribute *res_attr;
 
 		/* skip empty resources */
 		if (!pci_resource_len(pdev, i))
 			continue;
 
-		/* allocate attribute structure, piggyback attribute name */
-		res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
-		if (res_attr) {
-			char *res_attr_name = (char *)(res_attr + 1);
-
-			pdev->res_attr[i] = res_attr;
-			sprintf(res_attr_name, "resource%d", i);
-			res_attr->attr.name = res_attr_name;
-			res_attr->attr.mode = S_IRUSR | S_IWUSR;
-			res_attr->size = pci_resource_len(pdev, i);
-			res_attr->mmap = pci_mmap_resource;
-			res_attr->private = &pdev->resource[i];
-			retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
-			if (retval) {
-				pci_remove_resource_files(pdev);
-				return retval;
-			}
-		} else {
-			return -ENOMEM;
+		retval = pci_create_attr(pdev, i, 0);
+		/* for prefetchable resources, create a WC mappable file */
+		if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH)
+			retval = pci_create_attr(pdev, i, 1);
+
+		if (retval) {
+			pci_remove_resource_files(pdev);
+			return retval;
 		}
 	}
 	return 0;
@@ -697,9 +736,9 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 		attr = kzalloc(sizeof(*attr), GFP_ATOMIC);
 		if (attr) {
 			pdev->vpd->attr = attr;
-			attr->size = pdev->vpd->ops->get_size(pdev);
+			attr->size = pdev->vpd->len;
 			attr->attr.name = "vpd";
-			attr->attr.mode = S_IRUGO | S_IWUSR;
+			attr->attr.mode = S_IRUSR | S_IWUSR;
 			attr->read = pci_read_vpd;
 			attr->write = pci_write_vpd;
 			retval = sysfs_create_bin_file(&pdev->dev.kobj, attr);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 0a497c1b4227..00408c97e5fc 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -21,11 +21,11 @@ extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
 struct pci_vpd_ops {
 	int (*read)(struct pci_dev *dev, int pos, int size, char *buf);
 	int (*write)(struct pci_dev *dev, int pos, int size, const char *buf);
-	int (*get_size)(struct pci_dev *dev);
 	void (*release)(struct pci_dev *dev);
 };
 
 struct pci_vpd {
+	unsigned int len;
 	struct pci_vpd_ops *ops;
 	struct bin_attribute *attr; /* descriptor for sysfs VPD entry */
 };
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 61fedb2448b6..f82495583e63 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -506,6 +506,23 @@ static void free_link_state(struct pci_dev *pdev)
 	pdev->link_state = NULL;
 }
 
+static int pcie_aspm_sanity_check(struct pci_dev *pdev)
+{
+	struct pci_dev *child_dev;
+	int child_pos;
+
+	/*
+	 * Some functions in a slot might not all be PCIE functions, very
+	 * strange. Disable ASPM for the whole slot
+	 */
+	list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
+		child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+		if (!child_pos)
+			return -EINVAL;
+	}
+	return 0;
+}
+
 /*
  * pcie_aspm_init_link_state: Initiate PCI express link state.
  * It is called after the pcie and its children devices are scaned.
@@ -526,6 +543,9 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
 	if (list_empty(&pdev->subordinate->devices))
 		goto out;
 
+	if (pcie_aspm_sanity_check(pdev))
+		goto out;
+
 	mutex_lock(&aspm_lock);
 
 	link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index dabb563f51d9..338a3f94b4d4 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1670,6 +1670,48 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
 
+/*
+ * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
+ * VPD end tag will hang the device.  This problem was initially
+ * observed when a vpd entry was created in sysfs
+ * ('/sys/bus/pci/devices/<id>/vpd').   A read to this sysfs entry
+ * will dump 32k of data.  Reading a full 32k will cause an access
+ * beyond the VPD end tag causing the device to hang.  Once the device
+ * is hung, the bnx2 driver will not be able to reset the device.
+ * We believe that it is legal to read beyond the end tag and
+ * therefore the solution is to limit the read/write length.
+ */
+static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
+{
+	/*  Only disable the VPD capability for 5706, 5708, and 5709 rev. A */
+	if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+	    (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+	    ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
+	     (dev->revision & 0xf0) == 0x0)) {
+		if (dev->vpd)
+			dev->vpd->len = 0x80;
+	}
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+			 PCI_DEVICE_ID_NX2_5706,
+			 quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+			 PCI_DEVICE_ID_NX2_5706S,
+			 quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+			 PCI_DEVICE_ID_NX2_5708,
+			 quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+			 PCI_DEVICE_ID_NX2_5708S,
+			 quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+			 PCI_DEVICE_ID_NX2_5709,
+			 quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+			 PCI_DEVICE_ID_NX2_5709S,
+			 quirk_brcm_570x_limit_vpd);
+
 #ifdef CONFIG_PCI_MSI
 /* Some chipsets do not support MSI. We cannot easily rely on setting
  * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
@@ -1685,6 +1727,7 @@ static void __init quirk_disable_all_msi(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
 
 /* Disable MSI on chipsets that are known to not support it */