Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

8 files changed, 9 insertions, 9 deletions

diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 3bc72d18b121..8f3faf343f75 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -351,7 +351,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
 	 * To handle different BIOS behavior, we look for _OSC on a root
 	 * bridge preferentially (according to PCI fw spec). Later for
 	 * OSHP within the scope of the hotplug controller and its parents,
-	 * upto the host bridge under which this controller exists.
+	 * up to the host bridge under which this controller exists.
 	 */
 	handle = acpi_find_root_bridge_handle(pdev);
 	if (handle) {
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index e610cfe4f07b..2f67e9bc2f96 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -585,7 +585,7 @@ static void remove_bridge(acpi_handle handle)
 
 	/*
 	 * On root bridges with hotplug slots directly underneath (ie,
-	 * no p2p bridge inbetween), we call cleanup_bridge(). 
+	 * no p2p bridge between), we call cleanup_bridge(). 
 	 *
 	 * The else clause cleans up root bridges that either had no
 	 * hotplug slots at all, or had a p2p bridge underneath.
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index ef7411c660b9..758adb5f47fd 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -290,7 +290,7 @@ static int is_php_dn(struct device_node *dn, const int **indexes,
  * @dn: device node of slot
  *
  * This subroutine will register a hotplugable slot with the
- * PCI hotplug infrastructure. This routine is typicaly called
+ * PCI hotplug infrastructure. This routine is typically called
  * during boot time, if the hotplug slots are present at boot time,
  * or is called later, by the dlpar add code, if the slot is
  * being dynamically added during runtime.
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 7da3bef60d87..505c1c7075f0 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -2265,7 +2265,7 @@ int __init init_dmars(void)
 		/*
 		 * TBD:
 		 * we could share the same root & context tables
-		 * amoung all IOMMU's. Need to Split it later.
+		 * among all IOMMU's. Need to Split it later.
 		 */
 		ret = iommu_alloc_root_entry(iommu);
 		if (ret) {
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index a22557b20283..3607faf28a4d 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -289,7 +289,7 @@ int free_irte(int irq)
  * source validation type
  */
 #define SVT_NO_VERIFY		0x0  /* no verification is required */
-#define SVT_VERIFY_SID_SQ	0x1  /* verify using SID and SQ fiels */
+#define SVT_VERIFY_SID_SQ	0x1  /* verify using SID and SQ fields */
 #define SVT_VERIFY_BUS		0x2  /* verify bus of request-id */
 
 /*
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 7914951ef29a..9606e599a475 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -391,7 +391,7 @@ reserve_iova(struct iova_domain *iovad,
 				break;
 	}
 
-	/* We are here either becasue this is the first reserver node
+	/* We are here either because this is the first reserver node
 	 * or need to insert remaining non overlap addr range
 	 */
 	iova = __insert_new_range(iovad, pfn_lo, pfn_hi);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index a8a277a2e0d0..f8deb3e380a2 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -645,7 +645,7 @@ pci_adjust_legacy_attr(struct pci_bus *b, enum pci_mmap_state mmap_type)
  * a per-bus basis.  This routine creates the files and ties them into
  * their associated read, write and mmap files from pci-sysfs.c
  *
- * On error unwind, but don't propogate the error to the caller
+ * On error unwind, but don't propagate the error to the caller
  * as it is ok to set up the PCI bus without these files.
  */
 void pci_create_legacy_files(struct pci_bus *b)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bd80f6378463..5129ed6d8fa7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -263,7 +263,7 @@ static void quirk_vialatency(struct pci_dev *dev)
 	 *	This happens to include the IDE controllers....
 	 *
 	 *	VIA only apply this fix when an SB Live! is present but under
-	 *	both Linux and Windows this isnt enough, and we have seen
+	 *	both Linux and Windows this isn't enough, and we have seen
 	 *	corruption without SB Live! but with things like 3 UDMA IDE
 	 *	controllers. So we ignore that bit of the VIA recommendation..
 	 */
@@ -2680,7 +2680,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
  * This is a quirk for the Ricoh MMC controller found as a part of
  * some mulifunction chips.
 
- * This is very similiar and based on the ricoh_mmc driver written by
+ * This is very similar and based on the ricoh_mmc driver written by
  * Philip Langdale. Thank you for these magic sequences.
  *
  * These chips implement the four main memory card controllers (SD, MMC, MS, xD)