diff options
author | Tomer Maimon <tmaimon77@gmail.com> | 2023-07-27 22:21:24 +0200 |
---|---|---|
committer | Iwona Winiarska <iwona.winiarska@intel.com> | 2023-08-07 18:27:55 +0200 |
commit | 3e16184a1bd8ce83df2f8435e2eb4448d0339134 (patch) | |
tree | 5b9f86d99fdc4f30be7ecce9b95f29939f5b041e /drivers/peci | |
parent | dt-bindings: Add bindings for peci-npcm (diff) | |
download | linux-3e16184a1bd8ce83df2f8435e2eb4448d0339134.tar.xz linux-3e16184a1bd8ce83df2f8435e2eb4448d0339134.zip |
peci: Add peci-npcm controller driver
Add support for Nuvoton NPCM BMC hardware to the Platform Environment
Control Interface (PECI) subsystem.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Tyrone Ting <warp5tw@gmail.com>
Co-developed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20230727202126.1477515-3-iwona.winiarska@intel.com
Diffstat (limited to 'drivers/peci')
-rw-r--r-- | drivers/peci/controller/Kconfig | 16 | ||||
-rw-r--r-- | drivers/peci/controller/Makefile | 1 | ||||
-rw-r--r-- | drivers/peci/controller/peci-npcm.c | 298 |
3 files changed, 315 insertions, 0 deletions
diff --git a/drivers/peci/controller/Kconfig b/drivers/peci/controller/Kconfig index 2fc5e2abb74a..4f9c245ad042 100644 --- a/drivers/peci/controller/Kconfig +++ b/drivers/peci/controller/Kconfig @@ -16,3 +16,19 @@ config PECI_ASPEED This driver can also be built as a module. If so, the module will be called peci-aspeed. + +config PECI_NPCM + tristate "Nuvoton NPCM PECI support" + depends on ARCH_NPCM || COMPILE_TEST + depends on OF + select REGMAP_MMIO + help + This option enables PECI controller driver for Nuvoton NPCM7XX + and NPCM8XX SoCs. It allows BMC to discover devices connected + to it and communicate with them using PECI protocol. + + Say Y here if you want support for the Platform Environment Control + Interface (PECI) bus adapter driver on the Nuvoton NPCM SoCs. + + This support is also available as a module. If so, the module + will be called peci-npcm. diff --git a/drivers/peci/controller/Makefile b/drivers/peci/controller/Makefile index 022c28ef1bf0..e247449bb423 100644 --- a/drivers/peci/controller/Makefile +++ b/drivers/peci/controller/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_PECI_ASPEED) += peci-aspeed.o +obj-$(CONFIG_PECI_NPCM) += peci-npcm.o diff --git a/drivers/peci/controller/peci-npcm.c b/drivers/peci/controller/peci-npcm.c new file mode 100644 index 000000000000..ec613d35c796 --- /dev/null +++ b/drivers/peci/controller/peci-npcm.c @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology corporation + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/peci.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +/* NPCM GCR module */ +#define NPCM_INTCR3_OFFSET 0x9C +#define NPCM_INTCR3_PECIVSEL BIT(19) + +/* NPCM PECI Registers */ +#define NPCM_PECI_CTL_STS 0x00 +#define NPCM_PECI_RD_LENGTH 0x04 +#define NPCM_PECI_ADDR 0x08 +#define NPCM_PECI_CMD 0x0C +#define NPCM_PECI_CTL2 0x10 +#define NPCM_PECI_WR_LENGTH 0x1C +#define NPCM_PECI_PDDR 0x2C +#define NPCM_PECI_DAT_INOUT(n) (0x100 + ((n) * 4)) + +#define NPCM_PECI_MAX_REG 0x200 + +/* NPCM_PECI_CTL_STS - 0x00 : Control Register */ +#define NPCM_PECI_CTRL_DONE_INT_EN BIT(6) +#define NPCM_PECI_CTRL_ABRT_ERR BIT(4) +#define NPCM_PECI_CTRL_CRC_ERR BIT(3) +#define NPCM_PECI_CTRL_DONE BIT(1) +#define NPCM_PECI_CTRL_START_BUSY BIT(0) + +/* NPCM_PECI_RD_LENGTH - 0x04 : Command Register */ +#define NPCM_PECI_RD_LEN_MASK GENMASK(6, 0) + +/* NPCM_PECI_CMD - 0x10 : Command Register */ +#define NPCM_PECI_CTL2_MASK GENMASK(7, 6) + +/* NPCM_PECI_WR_LENGTH - 0x1C : Command Register */ +#define NPCM_PECI_WR_LEN_MASK GENMASK(6, 0) + +/* NPCM_PECI_PDDR - 0x2C : Command Register */ +#define NPCM_PECI_PDDR_MASK GENMASK(4, 0) + +#define NPCM_PECI_INT_MASK (NPCM_PECI_CTRL_ABRT_ERR | \ + NPCM_PECI_CTRL_CRC_ERR | \ + NPCM_PECI_CTRL_DONE) + +#define NPCM_PECI_IDLE_CHECK_TIMEOUT_USEC (50 * USEC_PER_MSEC) +#define NPCM_PECI_IDLE_CHECK_INTERVAL_USEC (10 * USEC_PER_MSEC) +#define NPCM_PECI_CMD_TIMEOUT_MS_DEFAULT 1000 +#define NPCM_PECI_CMD_TIMEOUT_MS_MAX 60000 +#define NPCM_PECI_HOST_NEG_BIT_RATE_DEFAULT 15 +#define NPCM_PECI_PULL_DOWN_DEFAULT 0 + +struct npcm_peci { + u32 cmd_timeout_ms; + struct completion xfer_complete; + struct regmap *regmap; + u32 status; + spinlock_t lock; /* to sync completion status handling */ + struct peci_controller *controller; + struct device *dev; + struct clk *clk; + int irq; +}; + +static int npcm_peci_xfer(struct peci_controller *controller, u8 addr, struct peci_request *req) +{ + struct npcm_peci *priv = dev_get_drvdata(controller->dev.parent); + unsigned long timeout = msecs_to_jiffies(priv->cmd_timeout_ms); + unsigned int msg_rd; + u32 cmd_sts; + int i, ret; + + /* Check command sts and bus idle state */ + ret = regmap_read_poll_timeout(priv->regmap, NPCM_PECI_CTL_STS, cmd_sts, + !(cmd_sts & NPCM_PECI_CTRL_START_BUSY), + NPCM_PECI_IDLE_CHECK_INTERVAL_USEC, + NPCM_PECI_IDLE_CHECK_TIMEOUT_USEC); + if (ret) + return ret; /* -ETIMEDOUT */ + + spin_lock_irq(&priv->lock); + reinit_completion(&priv->xfer_complete); + + regmap_write(priv->regmap, NPCM_PECI_ADDR, addr); + regmap_write(priv->regmap, NPCM_PECI_RD_LENGTH, NPCM_PECI_WR_LEN_MASK & req->rx.len); + regmap_write(priv->regmap, NPCM_PECI_WR_LENGTH, NPCM_PECI_WR_LEN_MASK & req->tx.len); + + if (req->tx.len) { + regmap_write(priv->regmap, NPCM_PECI_CMD, req->tx.buf[0]); + + for (i = 0; i < (req->tx.len - 1); i++) + regmap_write(priv->regmap, NPCM_PECI_DAT_INOUT(i), req->tx.buf[i + 1]); + } + +#if IS_ENABLED(CONFIG_DYNAMIC_DEBUG) + dev_dbg(priv->dev, "addr : %#02x, tx.len : %#02x, rx.len : %#02x\n", + addr, req->tx.len, req->rx.len); + print_hex_dump_bytes("TX : ", DUMP_PREFIX_NONE, req->tx.buf, req->tx.len); +#endif + + priv->status = 0; + regmap_update_bits(priv->regmap, NPCM_PECI_CTL_STS, NPCM_PECI_CTRL_START_BUSY, + NPCM_PECI_CTRL_START_BUSY); + + spin_unlock_irq(&priv->lock); + + ret = wait_for_completion_interruptible_timeout(&priv->xfer_complete, timeout); + if (ret < 0) + return ret; + + if (ret == 0) { + dev_dbg(priv->dev, "timeout waiting for a response\n"); + return -ETIMEDOUT; + } + + spin_lock_irq(&priv->lock); + + if (priv->status != NPCM_PECI_CTRL_DONE) { + spin_unlock_irq(&priv->lock); + dev_dbg(priv->dev, "no valid response, status: %#02x\n", priv->status); + return -EIO; + } + + regmap_write(priv->regmap, NPCM_PECI_CMD, 0); + + for (i = 0; i < req->rx.len; i++) { + regmap_read(priv->regmap, NPCM_PECI_DAT_INOUT(i), &msg_rd); + req->rx.buf[i] = (u8)msg_rd; + } + + spin_unlock_irq(&priv->lock); + +#if IS_ENABLED(CONFIG_DYNAMIC_DEBUG) + print_hex_dump_bytes("RX : ", DUMP_PREFIX_NONE, req->rx.buf, req->rx.len); +#endif + return 0; +} + +static irqreturn_t npcm_peci_irq_handler(int irq, void *arg) +{ + struct npcm_peci *priv = arg; + u32 status_ack = 0; + u32 status; + + spin_lock(&priv->lock); + regmap_read(priv->regmap, NPCM_PECI_CTL_STS, &status); + priv->status |= (status & NPCM_PECI_INT_MASK); + + if (status & NPCM_PECI_CTRL_CRC_ERR) + status_ack |= NPCM_PECI_CTRL_CRC_ERR; + + if (status & NPCM_PECI_CTRL_ABRT_ERR) + status_ack |= NPCM_PECI_CTRL_ABRT_ERR; + + /* + * All commands should be ended up with a NPCM_PECI_CTRL_DONE + * bit set even in an error case. + */ + if (status & NPCM_PECI_CTRL_DONE) { + status_ack |= NPCM_PECI_CTRL_DONE; + complete(&priv->xfer_complete); + } + + regmap_write_bits(priv->regmap, NPCM_PECI_CTL_STS, NPCM_PECI_INT_MASK, status_ack); + + spin_unlock(&priv->lock); + return IRQ_HANDLED; +} + +static int npcm_peci_init_ctrl(struct npcm_peci *priv) +{ + u32 cmd_sts; + int ret; + + priv->clk = devm_clk_get_enabled(priv->dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(priv->dev, "failed to get ref clock\n"); + return PTR_ERR(priv->clk); + } + + ret = device_property_read_u32(priv->dev, "cmd-timeout-ms", &priv->cmd_timeout_ms); + if (ret) { + priv->cmd_timeout_ms = NPCM_PECI_CMD_TIMEOUT_MS_DEFAULT; + } else if (priv->cmd_timeout_ms > NPCM_PECI_CMD_TIMEOUT_MS_MAX || + priv->cmd_timeout_ms == 0) { + dev_warn(priv->dev, "invalid cmd-timeout-ms: %u, falling back to: %u\n", + priv->cmd_timeout_ms, NPCM_PECI_CMD_TIMEOUT_MS_DEFAULT); + + priv->cmd_timeout_ms = NPCM_PECI_CMD_TIMEOUT_MS_DEFAULT; + } + + regmap_update_bits(priv->regmap, NPCM_PECI_CTL2, NPCM_PECI_CTL2_MASK, + NPCM_PECI_PULL_DOWN_DEFAULT << 6); + + regmap_update_bits(priv->regmap, NPCM_PECI_PDDR, NPCM_PECI_PDDR_MASK, + NPCM_PECI_HOST_NEG_BIT_RATE_DEFAULT); + + ret = regmap_read_poll_timeout(priv->regmap, NPCM_PECI_CTL_STS, cmd_sts, + !(cmd_sts & NPCM_PECI_CTRL_START_BUSY), + NPCM_PECI_IDLE_CHECK_INTERVAL_USEC, + NPCM_PECI_IDLE_CHECK_TIMEOUT_USEC); + if (ret) + return ret; /* -ETIMEDOUT */ + + /* PECI interrupt enable */ + regmap_update_bits(priv->regmap, NPCM_PECI_CTL_STS, NPCM_PECI_CTRL_DONE_INT_EN, + NPCM_PECI_CTRL_DONE_INT_EN); + + return 0; +} + +static const struct regmap_config npcm_peci_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = NPCM_PECI_MAX_REG, + .fast_io = true, +}; + +static struct peci_controller_ops npcm_ops = { + .xfer = npcm_peci_xfer, +}; + +static int npcm_peci_probe(struct platform_device *pdev) +{ + struct peci_controller *controller; + struct npcm_peci *priv; + void __iomem *base; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, priv); + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, &npcm_peci_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->irq = platform_get_irq(pdev, 0); + if (priv->irq < 0) + return priv->irq; + + ret = devm_request_irq(&pdev->dev, priv->irq, npcm_peci_irq_handler, + 0, "peci-npcm-irq", priv); + if (ret) + return ret; + + init_completion(&priv->xfer_complete); + spin_lock_init(&priv->lock); + + ret = npcm_peci_init_ctrl(priv); + if (ret) + return ret; + + controller = devm_peci_controller_add(priv->dev, &npcm_ops); + if (IS_ERR(controller)) + return dev_err_probe(priv->dev, PTR_ERR(controller), + "failed to add npcm peci controller\n"); + + priv->controller = controller; + + return 0; +} + +static const struct of_device_id npcm_peci_of_table[] = { + { .compatible = "nuvoton,npcm750-peci", }, + { .compatible = "nuvoton,npcm845-peci", }, + { } +}; +MODULE_DEVICE_TABLE(of, npcm_peci_of_table); + +static struct platform_driver npcm_peci_driver = { + .probe = npcm_peci_probe, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = npcm_peci_of_table, + }, +}; +module_platform_driver(npcm_peci_driver); + +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>"); +MODULE_DESCRIPTION("NPCM PECI driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PECI); |