Merge tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big pull request for USB and PHY drivers for 4.7-rc1

  Full details in the shortlog, but it's the normal major gadget driver
  updates, phy updates, new usbip code, as well as a bit of lots of
  other stuff.

  All have been in linux-next with no reported issues"

* tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits)
  USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support
  USB: serial: fix minor-number allocation
  USB: serial: quatech2: fix use-after-free in probe error path
  USB: serial: mxuport: fix use-after-free in probe error path
  USB: serial: keyspan: fix debug and error messages
  USB: serial: keyspan: fix URB unlink
  USB: serial: keyspan: fix use-after-free in probe error path
  USB: serial: io_edgeport: fix memory leaks in probe error path
  USB: serial: io_edgeport: fix memory leaks in attach error path
  usb: Remove unnecessary space before operator ','.
  usb: Remove unnecessary space before open square bracket.
  USB: FHCI: avoid redundant condition
  usb: host: xhci-rcar: Avoid long wait in xhci_reset()
  usb/host/fotg210: remove dead code in create_sysfs_files
  usb: wusbcore: Do not initialise statics to 0.
  usb: wusbcore: Remove space before ',' and '(' .
  USB: serial: cp210x: clean up CRTSCTS flag code
  USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code
  USB: serial: cp210x: fix hardware flow-control disable
  USB: serial: option: add even more ZTE device ids
  ...

10 files changed, 952 insertions, 372 deletions

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 27e5f6ee9a2a..b869b98835f4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,6 +15,15 @@ config GENERIC_PHY
 	  phy users can obtain reference to the PHY. All the users of this
 	  framework should select this config.
 
+config PHY_BCM_NS_USB2
+	tristate "Broadcom Northstar USB 2.0 PHY Driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support Broadcom USB 2.0 PHY connected to the USB
+	  controller on Northstar family.
+
 config PHY_BERLIN_USB
 	tristate "Marvell Berlin USB PHY Driver"
 	depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
@@ -113,14 +122,15 @@ config PHY_MIPHY365X
 
 config PHY_RCAR_GEN2
 	tristate "Renesas R-Car generation 2 USB PHY driver"
-	depends on ARCH_SHMOBILE
+	depends on ARCH_RENESAS
 	depends on GENERIC_PHY
 	help
 	  Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 
 config PHY_RCAR_GEN3_USB2
 	tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
-	depends on OF && ARCH_SHMOBILE
+	depends on ARCH_RENESAS
+	depends on EXTCON
 	select GENERIC_PHY
 	help
 	  Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
@@ -218,9 +228,8 @@ config PHY_MT65XX_USB3
 	depends on ARCH_MEDIATEK && OF
 	select GENERIC_PHY
 	help
-	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver
-	  for mt65xx SoCs. it supports two usb2.0 ports and
-	  one usb3.0 port.
+	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
+	  it supports multiple usb2.0 and usb3.0 ports.
 
 config PHY_HI6220_USB
 	tristate "hi6220 USB PHY support"
@@ -250,7 +259,8 @@ config PHY_SUN9I_USB
 	tristate "Allwinner sun9i SoC USB PHY driver"
 	depends on ARCH_SUNXI && HAS_IOMEM && OF
 	depends on RESET_CONTROLLER
-	depends on USB_COMMON
+	depends on USB_SUPPORT
+	select USB_COMMON
 	select GENERIC_PHY
 	help
 	  Enable this to support the transceiver that is part of Allwinner
@@ -403,14 +413,15 @@ config PHY_TUSB1210
 	help
 	  Support for TI TUSB1210 USB ULPI PHY.
 
-config PHY_BRCMSTB_SATA
-	tristate "Broadcom STB SATA PHY driver"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC
+config PHY_BRCM_SATA
+	tristate "Broadcom SATA PHY driver"
+	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
+	default ARCH_BCM_IPROC
 	help
-	  Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
-	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
+	  Enable this to support the Broadcom SATA PHY.
+	  If unsure, say N.
 
 config PHY_CYGNUS_PCIE
 	tristate "Broadcom Cygnus PCIe PHY driver"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d4f06e69fd9a..9c3e73ccabc4 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_PHY_BCM_NS_USB2)		+= phy-bcm-ns-usb2.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
 obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
@@ -49,7 +50,7 @@ obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-20nm.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o
 obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
-obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o
+obj-$(CONFIG_PHY_BRCM_SATA)		+= phy-brcm-sata.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o
 
diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c
new file mode 100644
index 000000000000..95ab6b2a0de5
--- /dev/null
+++ b/drivers/phy/phy-bcm-ns-usb2.c
@@ -0,0 +1,137 @@
+/*
+ * Broadcom Northstar USB 2.0 PHY Driver
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bcma/bcma.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct bcm_ns_usb2 {
+	struct device *dev;
+	struct clk *ref_clk;
+	struct phy *phy;
+	void __iomem *dmu;
+};
+
+static int bcm_ns_usb2_phy_init(struct phy *phy)
+{
+	struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
+	struct device *dev = usb2->dev;
+	void __iomem *dmu = usb2->dmu;
+	u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
+	int err = 0;
+
+	err = clk_prepare_enable(usb2->ref_clk);
+	if (err < 0) {
+		dev_err(dev, "Failed to prepare ref clock: %d\n", err);
+		goto err_out;
+	}
+
+	ref_clk_rate = clk_get_rate(usb2->ref_clk);
+	if (!ref_clk_rate) {
+		dev_err(dev, "Failed to get ref clock rate\n");
+		err = -EINVAL;
+		goto err_clk_off;
+	}
+
+	usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
+
+	if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
+		usb_pll_pdiv = usb2ctl;
+		usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK;
+		usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT;
+	} else {
+		usb_pll_pdiv = 1 << 3;
+	}
+
+	/* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */
+	usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
+
+	/* Unlock DMU PLL settings with some magic value */
+	writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
+
+	/* Write USB 2.0 PLL control setting */
+	usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
+	usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
+	writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
+
+	/* Lock DMU PLL settings */
+	writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
+
+err_clk_off:
+	clk_disable_unprepare(usb2->ref_clk);
+err_out:
+	return err;
+}
+
+static const struct phy_ops ops = {
+	.init		= bcm_ns_usb2_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int bcm_ns_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm_ns_usb2 *usb2;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+
+	usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL);
+	if (!usb2)
+		return -ENOMEM;
+	usb2->dev = dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
+	usb2->dmu = devm_ioremap_resource(dev, res);
+	if (IS_ERR(usb2->dmu)) {
+		dev_err(dev, "Failed to map DMU regs\n");
+		return PTR_ERR(usb2->dmu);
+	}
+
+	usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
+	if (IS_ERR(usb2->ref_clk)) {
+		dev_err(dev, "Clock not defined\n");
+		return PTR_ERR(usb2->ref_clk);
+	}
+
+	usb2->phy = devm_phy_create(dev, NULL, &ops);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	phy_set_drvdata(usb2->phy, usb2);
+	platform_set_drvdata(pdev, usb2);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id bcm_ns_usb2_id_table[] = {
+	{ .compatible = "brcm,ns-usb2-phy", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table);
+
+static struct platform_driver bcm_ns_usb2_driver = {
+	.probe		= bcm_ns_usb2_probe,
+	.driver = {
+		.name = "bcm_ns_usb2",
+		.of_match_table = bcm_ns_usb2_id_table,
+	},
+};
+module_platform_driver(bcm_ns_usb2_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/phy-brcm-sata.c
new file mode 100644
index 000000000000..6c4c5cb791ca
--- /dev/null
+++ b/drivers/phy/phy-brcm-sata.c
@@ -0,0 +1,412 @@
+/*
+ * Broadcom SATA3 AHCI Controller PHY Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define SATA_PCB_BANK_OFFSET				0x23c
+#define SATA_PCB_REG_OFFSET(ofs)			((ofs) * 4)
+
+#define MAX_PORTS					2
+
+/* Register offset between PHYs in PCB space */
+#define SATA_PCB_REG_28NM_SPACE_SIZE			0x1000
+
+/* The older SATA PHY registers duplicated per port registers within the map,
+ * rather than having a separate map per port.
+ */
+#define SATA_PCB_REG_40NM_SPACE_SIZE			0x10
+
+/* Register offset between PHYs in PHY control space */
+#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE		0x8
+
+enum brcm_sata_phy_version {
+	BRCM_SATA_PHY_STB_28NM,
+	BRCM_SATA_PHY_STB_40NM,
+	BRCM_SATA_PHY_IPROC_NS2,
+};
+
+struct brcm_sata_port {
+	int portnum;
+	struct phy *phy;
+	struct brcm_sata_phy *phy_priv;
+	bool ssc_en;
+};
+
+struct brcm_sata_phy {
+	struct device *dev;
+	void __iomem *phy_base;
+	void __iomem *ctrl_base;
+	enum brcm_sata_phy_version version;
+
+	struct brcm_sata_port phys[MAX_PORTS];
+};
+
+enum sata_phy_regs {
+	BLOCK0_REG_BANK				= 0x000,
+	BLOCK0_XGXSSTATUS			= 0x81,
+	BLOCK0_XGXSSTATUS_PLL_LOCK		= BIT(12),
+	BLOCK0_SPARE				= 0x8d,
+	BLOCK0_SPARE_OOB_CLK_SEL_MASK		= 0x3,
+	BLOCK0_SPARE_OOB_CLK_SEL_REFBY2		= 0x1,
+
+	PLL_REG_BANK_0				= 0x050,
+	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
+
+	PLL1_REG_BANK				= 0x060,
+	PLL1_ACTRL2				= 0x82,
+	PLL1_ACTRL3				= 0x83,
+	PLL1_ACTRL4				= 0x84,
+
+	OOB_REG_BANK				= 0x150,
+	OOB_CTRL1				= 0x80,
+	OOB_CTRL1_BURST_MAX_MASK		= 0xf,
+	OOB_CTRL1_BURST_MAX_SHIFT		= 12,
+	OOB_CTRL1_BURST_MIN_MASK		= 0xf,
+	OOB_CTRL1_BURST_MIN_SHIFT		= 8,
+	OOB_CTRL1_WAKE_IDLE_MAX_MASK		= 0xf,
+	OOB_CTRL1_WAKE_IDLE_MAX_SHIFT		= 4,
+	OOB_CTRL1_WAKE_IDLE_MIN_MASK		= 0xf,
+	OOB_CTRL1_WAKE_IDLE_MIN_SHIFT		= 0,
+	OOB_CTRL2				= 0x81,
+	OOB_CTRL2_SEL_ENA_SHIFT			= 15,
+	OOB_CTRL2_SEL_ENA_RC_SHIFT		= 14,
+	OOB_CTRL2_RESET_IDLE_MAX_MASK		= 0x3f,
+	OOB_CTRL2_RESET_IDLE_MAX_SHIFT		= 8,
+	OOB_CTRL2_BURST_CNT_MASK		= 0x3,
+	OOB_CTRL2_BURST_CNT_SHIFT		= 6,
+	OOB_CTRL2_RESET_IDLE_MIN_MASK		= 0x3f,
+	OOB_CTRL2_RESET_IDLE_MIN_SHIFT		= 0,
+
+	TXPMD_REG_BANK				= 0x1a0,
+	TXPMD_CONTROL1				= 0x81,
+	TXPMD_CONTROL1_TX_SSC_EN_FRC		= BIT(0),
+	TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL	= BIT(1),
+	TXPMD_TX_FREQ_CTRL_CONTROL1		= 0x82,
+	TXPMD_TX_FREQ_CTRL_CONTROL2		= 0x83,
+	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK	= 0x3ff,
+	TXPMD_TX_FREQ_CTRL_CONTROL3		= 0x84,
+	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK	= 0x3ff,
+};
+
+enum sata_phy_ctrl_regs {
+	PHY_CTRL_1				= 0x0,
+	PHY_CTRL_1_RESET			= BIT(0),
+};
+
+static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
+{
+	struct brcm_sata_phy *priv = port->phy_priv;
+	u32 size = 0;
+
+	switch (priv->version) {
+	case BRCM_SATA_PHY_STB_28NM:
+	case BRCM_SATA_PHY_IPROC_NS2:
+		size = SATA_PCB_REG_28NM_SPACE_SIZE;
+		break;
+	case BRCM_SATA_PHY_STB_40NM:
+		size = SATA_PCB_REG_40NM_SPACE_SIZE;
+		break;
+	default:
+		dev_err(priv->dev, "invalid phy version\n");
+		break;
+	};
+
+	return priv->phy_base + (port->portnum * size);
+}
+
+static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
+{
+	struct brcm_sata_phy *priv = port->phy_priv;
+	u32 size = 0;
+
+	switch (priv->version) {
+	case BRCM_SATA_PHY_IPROC_NS2:
+		size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE;
+		break;
+	default:
+		dev_err(priv->dev, "invalid phy version\n");
+		break;
+	};
+
+	return priv->ctrl_base + (port->portnum * size);
+}
+
+static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank,
+			     u32 ofs, u32 msk, u32 value)
+{
+	u32 tmp;
+
+	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
+	tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
+	tmp = (tmp & msk) | value;
+	writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs));
+}
+
+static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
+{
+	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
+	return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
+}
+
+/* These defaults were characterized by H/W group */
+#define STB_FMIN_VAL_DEFAULT	0x3df
+#define STB_FMAX_VAL_DEFAULT	0x3df
+#define STB_FMAX_VAL_SSC	0x83
+
+static int brcm_stb_sata_init(struct brcm_sata_port *port)
+{
+	void __iomem *base = brcm_sata_pcb_base(port);
+	struct brcm_sata_phy *priv = port->phy_priv;
+	u32 tmp;
+
+	/* override the TX spread spectrum setting */
+	tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
+	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
+
+	/* set fixed min freq */
+	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
+			 ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
+			 STB_FMIN_VAL_DEFAULT);
+
+	/* set fixed max freq depending on SSC config */
+	if (port->ssc_en) {
+		dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum);
+		tmp = STB_FMAX_VAL_SSC;
+	} else {
+		tmp = STB_FMAX_VAL_DEFAULT;
+	}
+
+	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
+			  ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
+
+	return 0;
+}
+
+/* NS2 SATA PLL1 defaults were characterized by H/W group */
+#define NS2_PLL1_ACTRL2_MAGIC	0x1df8
+#define NS2_PLL1_ACTRL3_MAGIC	0x2b00
+#define NS2_PLL1_ACTRL4_MAGIC	0x8824
+
+static int brcm_ns2_sata_init(struct brcm_sata_port *port)
+{
+	int try;
+	unsigned int val;
+	void __iomem *base = brcm_sata_pcb_base(port);
+	void __iomem *ctrl_base = brcm_sata_ctrl_base(port);
+	struct device *dev = port->phy_priv->dev;
+
+	/* Configure OOB control */
+	val = 0x0;
+	val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT);
+	val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT);
+	val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
+	val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
+	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+	val = 0x0;
+	val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
+	val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT);
+	val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
+	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+
+	/* Configure PHY PLL register bank 1 */
+	val = NS2_PLL1_ACTRL2_MAGIC;
+	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+	val = NS2_PLL1_ACTRL3_MAGIC;
+	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+	val = NS2_PLL1_ACTRL4_MAGIC;
+	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+
+	/* Configure PHY BLOCK0 register bank */
+	/* Set oob_clk_sel to refclk/2 */
+	brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE,
+			 ~BLOCK0_SPARE_OOB_CLK_SEL_MASK,
+			 BLOCK0_SPARE_OOB_CLK_SEL_REFBY2);
+
+	/* Strobe PHY reset using PHY control register */
+	writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1);
+	mdelay(1);
+	writel(0x0, ctrl_base + PHY_CTRL_1);
+	mdelay(1);
+
+	/* Wait for PHY PLL lock by polling pll_lock bit */
+	try = 50;
+	while (try) {
+		val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+					BLOCK0_XGXSSTATUS);
+		if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
+			break;
+		msleep(20);
+		try--;
+	}
+	if (!try) {
+		/* PLL did not lock; give up */
+		dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(dev, "port%d initialized\n", port->portnum);
+
+	return 0;
+}
+
+static int brcm_sata_phy_init(struct phy *phy)
+{
+	int rc;
+	struct brcm_sata_port *port = phy_get_drvdata(phy);
+
+	switch (port->phy_priv->version) {
+	case BRCM_SATA_PHY_STB_28NM:
+	case BRCM_SATA_PHY_STB_40NM:
+		rc = brcm_stb_sata_init(port);
+		break;
+	case BRCM_SATA_PHY_IPROC_NS2:
+		rc = brcm_ns2_sata_init(port);
+		break;
+	default:
+		rc = -ENODEV;
+	};
+
+	return 0;
+}
+
+static const struct phy_ops phy_ops = {
+	.init		= brcm_sata_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id brcm_sata_phy_of_match[] = {
+	{ .compatible	= "brcm,bcm7445-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_STB_28NM },
+	{ .compatible	= "brcm,bcm7425-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_STB_40NM },
+	{ .compatible	= "brcm,iproc-ns2-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
+
+static int brcm_sata_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = dev->of_node, *child;
+	const struct of_device_id *of_id;
+	struct brcm_sata_phy *priv;
+	struct resource *res;
+	struct phy_provider *provider;
+	int ret, count = 0;
+
+	if (of_get_child_count(dn) == 0)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	dev_set_drvdata(dev, priv);
+	priv->dev = dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+	priv->phy_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->phy_base))
+		return PTR_ERR(priv->phy_base);
+
+	of_id = of_match_node(brcm_sata_phy_of_match, dn);
+	if (of_id)
+		priv->version = (enum brcm_sata_phy_version)of_id->data;
+	else
+		priv->version = BRCM_SATA_PHY_STB_28NM;
+
+	if (priv->version == BRCM_SATA_PHY_IPROC_NS2) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						   "phy-ctrl");
+		priv->ctrl_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->ctrl_base))
+			return PTR_ERR(priv->ctrl_base);
+	}
+
+	for_each_available_child_of_node(dn, child) {
+		unsigned int id;
+		struct brcm_sata_port *port;
+
+		if (of_property_read_u32(child, "reg", &id)) {
+			dev_err(dev, "missing reg property in node %s\n",
+					child->name);
+			ret = -EINVAL;
+			goto put_child;
+		}
+
+		if (id >= MAX_PORTS) {
+			dev_err(dev, "invalid reg: %u\n", id);
+			ret = -EINVAL;
+			goto put_child;
+		}
+		if (priv->phys[id].phy) {
+			dev_err(dev, "already registered port %u\n", id);
+			ret = -EINVAL;
+			goto put_child;
+		}
+
+		port = &priv->phys[id];
+		port->portnum = id;
+		port->phy_priv = priv;
+		port->phy = devm_phy_create(dev, child, &phy_ops);
+		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
+		if (IS_ERR(port->phy)) {
+			dev_err(dev, "failed to create PHY\n");
+			ret = PTR_ERR(port->phy);
+			goto put_child;
+		}
+
+		phy_set_drvdata(port->phy, port);
+		count++;
+	}
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "could not register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_info(dev, "registered %d port(s)\n", count);
+
+	return 0;
+put_child:
+	of_node_put(child);
+	return ret;
+}
+
+static struct platform_driver brcm_sata_phy_driver = {
+	.probe	= brcm_sata_phy_probe,
+	.driver	= {
+		.of_match_table	= brcm_sata_phy_of_match,
+		.name		= "brcm-sata-phy",
+	}
+};
+module_platform_driver(brcm_sata_phy_driver);
+
+MODULE_DESCRIPTION("Broadcom SATA PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marc Carino");
+MODULE_AUTHOR("Brian Norris");
+MODULE_ALIAS("platform:phy-brcm-sata");
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
deleted file mode 100644
index a23172ff40e3..000000000000
--- a/drivers/phy/phy-brcmstb-sata.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Broadcom SATA3 AHCI Controller PHY Driver
- *
- * Copyright © 2009-2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-
-#define SATA_MDIO_BANK_OFFSET				0x23c
-#define SATA_MDIO_REG_OFFSET(ofs)			((ofs) * 4)
-
-#define MAX_PORTS					2
-
-/* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_28NM_SPACE_SIZE			0x1000
-
-/* The older SATA PHY registers duplicated per port registers within the map,
- * rather than having a separate map per port.
- */
-#define SATA_MDIO_REG_40NM_SPACE_SIZE			0x10
-
-enum brcm_sata_phy_version {
-	BRCM_SATA_PHY_28NM,
-	BRCM_SATA_PHY_40NM,
-};
-
-struct brcm_sata_port {
-	int portnum;
-	struct phy *phy;
-	struct brcm_sata_phy *phy_priv;
-	bool ssc_en;
-};
-
-struct brcm_sata_phy {
-	struct device *dev;
-	void __iomem *phy_base;
-	enum brcm_sata_phy_version version;
-
-	struct brcm_sata_port phys[MAX_PORTS];
-};
-
-enum sata_mdio_phy_regs {
-	PLL_REG_BANK_0				= 0x50,
-	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
-
-	TXPMD_REG_BANK				= 0x1a0,
-	TXPMD_CONTROL1				= 0x81,
-	TXPMD_CONTROL1_TX_SSC_EN_FRC		= BIT(0),
-	TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL	= BIT(1),
-	TXPMD_TX_FREQ_CTRL_CONTROL1		= 0x82,
-	TXPMD_TX_FREQ_CTRL_CONTROL2		= 0x83,
-	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK	= 0x3ff,
-	TXPMD_TX_FREQ_CTRL_CONTROL3		= 0x84,
-	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK	= 0x3ff,
-};
-
-static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
-{
-	struct brcm_sata_phy *priv = port->phy_priv;
-	u32 offset = 0;
-
-	if (priv->version == BRCM_SATA_PHY_28NM)
-		offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
-	else if (priv->version == BRCM_SATA_PHY_40NM)
-		offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
-	else
-		dev_err(priv->dev, "invalid phy version\n");
-
-	return priv->phy_base + (port->portnum * offset);
-}
-
-static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
-			      u32 msk, u32 value)
-{
-	u32 tmp;
-
-	writel(bank, addr + SATA_MDIO_BANK_OFFSET);
-	tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs));
-	tmp = (tmp & msk) | value;
-	writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs));
-}
-
-/* These defaults were characterized by H/W group */
-#define FMIN_VAL_DEFAULT	0x3df
-#define FMAX_VAL_DEFAULT	0x3df
-#define FMAX_VAL_SSC		0x83
-
-static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
-{
-	void __iomem *base = brcm_sata_phy_base(port);
-	struct brcm_sata_phy *priv = port->phy_priv;
-	u32 tmp;
-
-	/* override the TX spread spectrum setting */
-	tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
-	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
-
-	/* set fixed min freq */
-	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
-			  ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
-			  FMIN_VAL_DEFAULT);
-
-	/* set fixed max freq depending on SSC config */
-	if (port->ssc_en) {
-		dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum);
-		tmp = FMAX_VAL_SSC;
-	} else {
-		tmp = FMAX_VAL_DEFAULT;
-	}
-
-	brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
-			  ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
-}
-
-static int brcm_sata_phy_init(struct phy *phy)
-{
-	struct brcm_sata_port *port = phy_get_drvdata(phy);
-
-	brcm_sata_cfg_ssc(port);
-
-	return 0;
-}
-
-static const struct phy_ops phy_ops = {
-	.init		= brcm_sata_phy_init,
-	.owner		= THIS_MODULE,
-};
-
-static const struct of_device_id brcm_sata_phy_of_match[] = {
-	{ .compatible	= "brcm,bcm7445-sata-phy",
-	  .data = (void *)BRCM_SATA_PHY_28NM },
-	{ .compatible	= "brcm,bcm7425-sata-phy",
-	  .data = (void *)BRCM_SATA_PHY_40NM },
-	{},
-};
-MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
-
-static int brcm_sata_phy_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device_node *dn = dev->of_node, *child;
-	const struct of_device_id *of_id;
-	struct brcm_sata_phy *priv;
-	struct resource *res;
-	struct phy_provider *provider;
-	int ret, count = 0;
-
-	if (of_get_child_count(dn) == 0)
-		return -ENODEV;
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-	dev_set_drvdata(dev, priv);
-	priv->dev = dev;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
-	priv->phy_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(priv->phy_base))
-		return PTR_ERR(priv->phy_base);
-
-	of_id = of_match_node(brcm_sata_phy_of_match, dn);
-	if (of_id)
-		priv->version = (enum brcm_sata_phy_version)of_id->data;
-	else
-		priv->version = BRCM_SATA_PHY_28NM;
-
-	for_each_available_child_of_node(dn, child) {
-		unsigned int id;
-		struct brcm_sata_port *port;
-
-		if (of_property_read_u32(child, "reg", &id)) {
-			dev_err(dev, "missing reg property in node %s\n",
-					child->name);
-			ret = -EINVAL;
-			goto put_child;
-		}
-
-		if (id >= MAX_PORTS) {
-			dev_err(dev, "invalid reg: %u\n", id);
-			ret = -EINVAL;
-			goto put_child;
-		}
-		if (priv->phys[id].phy) {
-			dev_err(dev, "already registered port %u\n", id);
-			ret = -EINVAL;
-			goto put_child;
-		}
-
-		port = &priv->phys[id];
-		port->portnum = id;
-		port->phy_priv = priv;
-		port->phy = devm_phy_create(dev, child, &phy_ops);
-		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
-		if (IS_ERR(port->phy)) {
-			dev_err(dev, "failed to create PHY\n");
-			ret = PTR_ERR(port->phy);
-			goto put_child;
-		}
-
-		phy_set_drvdata(port->phy, port);
-		count++;
-	}
-
-	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (IS_ERR(provider)) {
-		dev_err(dev, "could not register PHY provider\n");
-		return PTR_ERR(provider);
-	}
-
-	dev_info(dev, "registered %d port(s)\n", count);
-
-	return 0;
-put_child:
-	of_node_put(child);
-	return ret;
-}
-
-static struct platform_driver brcm_sata_phy_driver = {
-	.probe	= brcm_sata_phy_probe,
-	.driver	= {
-		.of_match_table	= brcm_sata_phy_of_match,
-		.name		= "brcmstb-sata-phy",
-	}
-};
-module_platform_driver(brcm_sata_phy_driver);
-
-MODULE_DESCRIPTION("Broadcom STB SATA PHY driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marc Carino");
-MODULE_AUTHOR("Brian Norris");
-MODULE_ALIAS("platform:phy-brcmstb-sata");
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index 2a54caba93b4..cc093ebfda94 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -1,7 +1,7 @@
 /*
  * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
  *
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2013,2016 Samsung Electronics Co., Ltd.
  * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -13,96 +13,276 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/mfd/syscon/exynos4-pmu.h>
+#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 #include <linux/mfd/syscon.h>
 
-/* MIPI_PHYn_CONTROL reg. offset (for base address from ioremap): n = 0..1 */
-#define EXYNOS_MIPI_PHY_CONTROL(n)	((n) * 4)
-
 enum exynos_mipi_phy_id {
+	EXYNOS_MIPI_PHY_ID_NONE = -1,
 	EXYNOS_MIPI_PHY_ID_CSIS0,
 	EXYNOS_MIPI_PHY_ID_DSIM0,
 	EXYNOS_MIPI_PHY_ID_CSIS1,
 	EXYNOS_MIPI_PHY_ID_DSIM1,
+	EXYNOS_MIPI_PHY_ID_CSIS2,
 	EXYNOS_MIPI_PHYS_NUM
 };
 
-#define is_mipi_dsim_phy_id(id) \
-	((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1)
+enum exynos_mipi_phy_regmap_id {
+	EXYNOS_MIPI_REGMAP_PMU,
+	EXYNOS_MIPI_REGMAP_DISP,
+	EXYNOS_MIPI_REGMAP_CAM0,
+	EXYNOS_MIPI_REGMAP_CAM1,
+	EXYNOS_MIPI_REGMAPS_NUM
+};
+
+struct mipi_phy_device_desc {
+	int num_phys;
+	int num_regmaps;
+	const char *regmap_names[EXYNOS_MIPI_REGMAPS_NUM];
+	struct exynos_mipi_phy_desc {
+		enum exynos_mipi_phy_id	coupled_phy_id;
+		u32 enable_val;
+		unsigned int enable_reg;
+		enum exynos_mipi_phy_regmap_id enable_map;
+		u32 resetn_val;
+		unsigned int resetn_reg;
+		enum exynos_mipi_phy_regmap_id resetn_map;
+	} phys[EXYNOS_MIPI_PHYS_NUM];
+};
+
+static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
+	.num_regmaps = 1,
+	.regmap_names = {"syscon"},
+	.num_phys = 4,
+	.phys = {
+		{
+			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+			.resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+			.resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
+			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+			.resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
+			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+			.resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		},
+	},
+};
+
+static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
+	.num_regmaps = 1,
+	.regmap_names = {"syscon"},
+	.num_phys = 5,
+	.phys = {
+		{
+			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+			.resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+			.resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+		},
+	},
+};
+
+#define EXYNOS5433_SYSREG_DISP_MIPI_PHY		0x100C
+#define EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON	0x1014
+#define EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON	0x1020
+
+static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
+	.num_regmaps = 4,
+	.regmap_names = {
+		"samsung,pmu-syscon",
+		"samsung,disp-sysreg",
+		"samsung,cam0-sysreg",
+		"samsung,cam1-sysreg"
+	},
+	.num_phys = 5,
+	.phys = {
+		{
+			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = BIT(0),
+			.resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
+			.resetn_map = EXYNOS_MIPI_REGMAP_CAM0,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = BIT(0),
+			.resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
+			.resetn_map = EXYNOS_MIPI_REGMAP_DISP,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = BIT(1),
+			.resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
+			.resetn_map = EXYNOS_MIPI_REGMAP_CAM0,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = BIT(1),
+			.resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
+			.resetn_map = EXYNOS_MIPI_REGMAP_DISP,
+		}, {
+			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
+			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_reg = EXYNOS5433_MIPI_PHY2_CONTROL,
+			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
+			.resetn_val = BIT(0),
+			.resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON,
+			.resetn_map = EXYNOS_MIPI_REGMAP_CAM1,
+		},
+	},
+};
 
 struct exynos_mipi_video_phy {
+	struct regmap *regmaps[EXYNOS_MIPI_REGMAPS_NUM];
+	int num_phys;
 	struct video_phy_desc {
 		struct phy *phy;
 		unsigned int index;
+		const struct exynos_mipi_phy_desc *data;
 	} phys[EXYNOS_MIPI_PHYS_NUM];
 	spinlock_t slock;
-	void __iomem *regs;
-	struct regmap *regmap;
 };
 
-static int __set_phy_state(struct exynos_mipi_video_phy *state,
-			enum exynos_mipi_phy_id id, unsigned int on)
+static inline int __is_running(const struct exynos_mipi_phy_desc *data,
+			struct exynos_mipi_video_phy *state)
 {
-	const unsigned int offset = EXYNOS4_MIPI_PHY_CONTROL(id / 2);
-	void __iomem *addr;
-	u32 val, reset;
+	u32 val;
 
-	if (is_mipi_dsim_phy_id(id))
-		reset = EXYNOS4_MIPI_PHY_MRESETN;
-	else
-		reset = EXYNOS4_MIPI_PHY_SRESETN;
+	regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
+	return val & data->resetn_val;
+}
+
+static int __set_phy_state(const struct exynos_mipi_phy_desc *data,
+			   struct exynos_mipi_video_phy *state, unsigned int on)
+{
+	u32 val;
 
 	spin_lock(&state->slock);
 
-	if (!IS_ERR(state->regmap)) {
-		regmap_read(state->regmap, offset, &val);
-		if (on)
-			val |= reset;
-		else
-			val &= ~reset;
-		regmap_write(state->regmap, offset, val);
-		if (on)
-			val |= EXYNOS4_MIPI_PHY_ENABLE;
-		else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
-			val &= ~EXYNOS4_MIPI_PHY_ENABLE;
-		regmap_write(state->regmap, offset, val);
-	} else {
-		addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
-
-		val = readl(addr);
-		if (on)
-			val |= reset;
-		else
-			val &= ~reset;
-		writel(val, addr);
-		/* Clear ENABLE bit only if MRESETN, SRESETN bits are not set */
-		if (on)
-			val |= EXYNOS4_MIPI_PHY_ENABLE;
-		else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
-			val &= ~EXYNOS4_MIPI_PHY_ENABLE;
-
-		writel(val, addr);
+	/* disable in PMU sysreg */
+	if (!on && data->coupled_phy_id >= 0 &&
+	    !__is_running(state->phys[data->coupled_phy_id].data, state)) {
+		regmap_read(state->regmaps[data->enable_map], data->enable_reg,
+			    &val);
+		val &= ~data->enable_val;
+		regmap_write(state->regmaps[data->enable_map], data->enable_reg,
+			     val);
+	}
+
+	/* PHY reset */
+	regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
+	val = on ? (val | data->resetn_val) : (val & ~data->resetn_val);
+	regmap_write(state->regmaps[data->resetn_map], data->resetn_reg, val);
+
+	/* enable in PMU sysreg */
+	if (on) {
+		regmap_read(state->regmaps[data->enable_map], data->enable_reg,
+			    &val);
+		val |= data->enable_val;
+		regmap_write(state->regmaps[data->enable_map], data->enable_reg,
+			     val);
 	}
 
 	spin_unlock(&state->slock);
+
 	return 0;
 }
 
 #define to_mipi_video_phy(desc) \
-	container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]);
+	container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index])
 
 static int exynos_mipi_video_phy_power_on(struct phy *phy)
 {
 	struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
 	struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
 
-	return __set_phy_state(state, phy_desc->index, 1);
+	return __set_phy_state(phy_desc->data, state, 1);
 }
 
 static int exynos_mipi_video_phy_power_off(struct phy *phy)
@@ -110,7 +290,7 @@ static int exynos_mipi_video_phy_power_off(struct phy *phy)
 	struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
 	struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
 
-	return __set_phy_state(state, phy_desc->index, 0);
+	return __set_phy_state(phy_desc->data, state, 0);
 }
 
 static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
@@ -118,7 +298,7 @@ static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
 {
 	struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
 
-	if (WARN_ON(args->args[0] >= EXYNOS_MIPI_PHYS_NUM))
+	if (WARN_ON(args->args[0] >= state->num_phys))
 		return ERR_PTR(-ENODEV);
 
 	return state->phys[args->args[0]].phy;
@@ -132,32 +312,33 @@ static const struct phy_ops exynos_mipi_video_phy_ops = {
 
 static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
 {
+	const struct mipi_phy_device_desc *phy_dev;
 	struct exynos_mipi_video_phy *state;
 	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
 	struct phy_provider *phy_provider;
 	unsigned int i;
 
+	phy_dev = of_device_get_match_data(dev);
+	if (!phy_dev)
+		return -ENODEV;
+
 	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
 	if (!state)
 		return -ENOMEM;
 
-	state->regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
-	if (IS_ERR(state->regmap)) {
-		struct resource *res;
-
-		dev_info(dev, "regmap lookup failed: %ld\n",
-			 PTR_ERR(state->regmap));
-
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		state->regs = devm_ioremap_resource(dev, res);
-		if (IS_ERR(state->regs))
-			return PTR_ERR(state->regs);
+	for (i = 0; i < phy_dev->num_regmaps; i++) {
+		state->regmaps[i] = syscon_regmap_lookup_by_phandle(np,
+						phy_dev->regmap_names[i]);
+		if (IS_ERR(state->regmaps[i]))
+			return PTR_ERR(state->regmaps[i]);
 	}
+	state->num_phys = phy_dev->num_phys;
+	spin_lock_init(&state->slock);
 
 	dev_set_drvdata(dev, state);
-	spin_lock_init(&state->slock);
 
-	for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
+	for (i = 0; i < state->num_phys; i++) {
 		struct phy *phy = devm_phy_create(dev, NULL,
 						  &exynos_mipi_video_phy_ops);
 		if (IS_ERR(phy)) {
@@ -167,6 +348,7 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
 
 		state->phys[i].phy = phy;
 		state->phys[i].index = i;
+		state->phys[i].data = &phy_dev->phys[i];
 		phy_set_drvdata(phy, &state->phys[i]);
 	}
 
@@ -177,8 +359,17 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
-	{ .compatible = "samsung,s5pv210-mipi-video-phy" },
-	{ },
+	{
+		.compatible = "samsung,s5pv210-mipi-video-phy",
+		.data = &s5pv210_mipi_phy,
+	}, {
+		.compatible = "samsung,exynos5420-mipi-video-phy",
+		.data = &exynos5420_mipi_phy,
+	}, {
+		.compatible = "samsung,exynos5433-mipi-video-phy",
+		.data = &exynos5433_mipi_phy,
+	},
+	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
 
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
index c0e7b4b0cf5c..4d85e730ccab 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -134,6 +134,11 @@
 #define U3P_SR_COEF_DIVISOR	1000
 #define U3P_FM_DET_CYCLE_CNT	1024
 
+struct mt65xx_phy_pdata {
+	/* avoid RX sensitivity level degradation only for mt8173 */
+	bool avoid_rx_sen_degradation;
+};
+
 struct mt65xx_phy_instance {
 	struct phy *phy;
 	void __iomem *port_base;
@@ -145,6 +150,7 @@ struct mt65xx_u3phy {
 	struct device *dev;
 	void __iomem *sif_base;	/* include sif2, but exclude port's */
 	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
+	const struct mt65xx_phy_pdata *pdata;
 	struct mt65xx_phy_instance **phys;
 	int nphys;
 };
@@ -241,22 +247,26 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
 		tmp = readl(port_base + U3P_U2PHYACR4);
 		tmp &= ~P2C_U2_GPIO_CTR_MSK;
 		writel(tmp, port_base + U3P_U2PHYACR4);
+	}
 
-		tmp = readl(port_base + U3P_USBPHYACR2);
-		tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
-		writel(tmp, port_base + U3P_USBPHYACR2);
-
-		tmp = readl(port_base + U3D_U2PHYDCR0);
-		tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
-		writel(tmp, port_base + U3D_U2PHYDCR0);
-	} else {
-		tmp = readl(port_base + U3D_U2PHYDCR0);
-		tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
-		writel(tmp, port_base + U3D_U2PHYDCR0);
-
-		tmp = readl(port_base + U3P_U2PHYDTM0);
-		tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
-		writel(tmp, port_base + U3P_U2PHYDTM0);
+	if (u3phy->pdata->avoid_rx_sen_degradation) {
+		if (!index) {
+			tmp = readl(port_base + U3P_USBPHYACR2);
+			tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
+			writel(tmp, port_base + U3P_USBPHYACR2);
+
+			tmp = readl(port_base + U3D_U2PHYDCR0);
+			tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+			writel(tmp, port_base + U3D_U2PHYDCR0);
+		} else {
+			tmp = readl(port_base + U3D_U2PHYDCR0);
+			tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
+			writel(tmp, port_base + U3D_U2PHYDCR0);
+
+			tmp = readl(port_base + U3P_U2PHYDTM0);
+			tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
+			writel(tmp, port_base + U3P_U2PHYDTM0);
+		}
 	}
 
 	tmp = readl(port_base + U3P_USBPHYACR6);
@@ -318,7 +328,7 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
 		tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
 		writel(tmp, u3phy->sif_base + U3P_XTALCTL3);
 
-		/* [mt8173]switch 100uA current to SSUSB */
+		/* switch 100uA current to SSUSB */
 		tmp = readl(port_base + U3P_USBPHYACR5);
 		tmp |= PA5_RG_U2_HS_100U_U3_EN;
 		writel(tmp, port_base + U3P_USBPHYACR5);
@@ -335,7 +345,7 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
 	tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4);
 	writel(tmp, port_base + U3P_USBPHYACR5);
 
-	if (index) {
+	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
 		tmp = readl(port_base + U3D_U2PHYDCR0);
 		tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
 		writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -386,7 +396,9 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
 		tmp = readl(port_base + U3P_U3_PHYA_REG0);
 		tmp &= ~P3A_RG_U3_VUSB10_ON;
 		writel(tmp, port_base + U3P_U3_PHYA_REG0);
-	} else {
+	}
+
+	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
 		tmp = readl(port_base + U3D_U2PHYDCR0);
 		tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
 		writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -402,7 +414,7 @@ static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
 	u32 index = instance->index;
 	u32 tmp;
 
-	if (index) {
+	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
 		tmp = readl(port_base + U3D_U2PHYDCR0);
 		tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
 		writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -502,8 +514,24 @@ static struct phy_ops mt65xx_u3phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct mt65xx_phy_pdata mt2701_pdata = {
+	.avoid_rx_sen_degradation = false,
+};
+
+static const struct mt65xx_phy_pdata mt8173_pdata = {
+	.avoid_rx_sen_degradation = true,
+};
+
+static const struct of_device_id mt65xx_u3phy_id_table[] = {
+	{ .compatible = "mediatek,mt2701-u3phy", .data = &mt2701_pdata },
+	{ .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
+
 static int mt65xx_u3phy_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *match;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct device_node *child_np;
@@ -513,10 +541,15 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
 	struct resource res;
 	int port, retval;
 
+	match = of_match_node(mt65xx_u3phy_id_table, pdev->dev.of_node);
+	if (!match)
+		return -EINVAL;
+
 	u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
 	if (!u3phy)
 		return -ENOMEM;
 
+	u3phy->pdata = match->data;
 	u3phy->nphys = of_get_child_count(np);
 	u3phy->phys = devm_kcalloc(dev, u3phy->nphys,
 				       sizeof(*u3phy->phys), GFP_KERNEL);
@@ -587,12 +620,6 @@ put_child:
 	return retval;
 }
 
-static const struct of_device_id mt65xx_u3phy_id_table[] = {
-	{ .compatible = "mediatek,mt8173-u3phy", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
-
 static struct platform_driver mt65xx_u3phy_driver = {
 	.probe		= mt65xx_u3phy_probe,
 	.driver		= {
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c
index c7a05996d5c1..97d4dd6ea924 100644
--- a/drivers/phy/phy-rcar-gen2.c
+++ b/drivers/phy/phy-rcar-gen2.c
@@ -195,6 +195,7 @@ static const struct of_device_id rcar_gen2_phy_match_table[] = {
 	{ .compatible = "renesas,usb-phy-r8a7790" },
 	{ .compatible = "renesas,usb-phy-r8a7791" },
 	{ .compatible = "renesas,usb-phy-r8a7794" },
+	{ .compatible = "renesas,rcar-gen2-usb-phy" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index bc4f7dd821aa..76bb88f0700a 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/extcon.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -19,6 +20,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 /******* USB2.0 Host registers (original offset is +0x200) *******/
 #define USB2_INT_ENABLE		0x000
@@ -74,20 +76,17 @@
 #define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS		BIT(4)
 
-struct rcar_gen3_data {
-	void __iomem *base;
-	struct clk *clk;
-};
-
 struct rcar_gen3_chan {
-	struct rcar_gen3_data usb2;
+	void __iomem *base;
+	struct extcon_dev *extcon;
 	struct phy *phy;
+	struct regulator *vbus;
 	bool has_otg;
 };
 
 static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
 {
-	void __iomem *usb2_base = ch->usb2.base;
+	void __iomem *usb2_base = ch->base;
 	u32 val = readl(usb2_base + USB2_COMMCTRL);
 
 	dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
@@ -100,7 +99,7 @@ static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
 
 static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
 {
-	void __iomem *usb2_base = ch->usb2.base;
+	void __iomem *usb2_base = ch->base;
 	u32 val = readl(usb2_base + USB2_LINECTRL1);
 
 	dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
@@ -114,7 +113,7 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
 
 static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
 {
-	void __iomem *usb2_base = ch->usb2.base;
+	void __iomem *usb2_base = ch->base;
 	u32 val = readl(usb2_base + USB2_ADPCTRL);
 
 	dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
@@ -130,6 +129,9 @@ static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
 	rcar_gen3_set_linectrl(ch, 1, 1);
 	rcar_gen3_set_host_mode(ch, 1);
 	rcar_gen3_enable_vbus_ctrl(ch, 1);
+
+	extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
+	extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
 }
 
 static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
@@ -137,17 +139,20 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
 	rcar_gen3_set_linectrl(ch, 0, 1);
 	rcar_gen3_set_host_mode(ch, 0);
 	rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+	extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
+	extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
 }
 
 static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
 {
-	return !!(readl(ch->usb2.base + USB2_ADPCTRL) &
+	return !!(readl(ch->base + USB2_ADPCTRL) &
 		  USB2_ADPCTRL_OTGSESSVLD);
 }
 
 static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
 {
-	return !!(readl(ch->usb2.base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
+	return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
 }
 
 static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
@@ -166,7 +171,7 @@ static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
 
 static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 {
-	void __iomem *usb2_base = ch->usb2.base;
+	void __iomem *usb2_base = ch->base;
 	u32 val;
 
 	val = readl(usb2_base + USB2_VBCTRL);
@@ -187,7 +192,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 static int rcar_gen3_phy_usb2_init(struct phy *p)
 {
 	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
-	void __iomem *usb2_base = channel->usb2.base;
+	void __iomem *usb2_base = channel->base;
 
 	/* Initialize USB2 part */
 	writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
@@ -205,7 +210,7 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p)
 {
 	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
 
-	writel(0, channel->usb2.base + USB2_INT_ENABLE);
+	writel(0, channel->base + USB2_INT_ENABLE);
 
 	return 0;
 }
@@ -213,8 +218,15 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p)
 static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 {
 	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
-	void __iomem *usb2_base = channel->usb2.base;
+	void __iomem *usb2_base = channel->base;
 	u32 val;
+	int ret;
+
+	if (channel->vbus) {
+		ret = regulator_enable(channel->vbus);
+		if (ret)
+			return ret;
+	}
 
 	val = readl(usb2_base + USB2_USBCTR);
 	val |= USB2_USBCTR_PLL_RST;
@@ -225,17 +237,29 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	return 0;
 }
 
+static int rcar_gen3_phy_usb2_power_off(struct phy *p)
+{
+	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+	int ret = 0;
+
+	if (channel->vbus)
+		ret = regulator_disable(channel->vbus);
+
+	return ret;
+}
+
 static struct phy_ops rcar_gen3_phy_usb2_ops = {
 	.init		= rcar_gen3_phy_usb2_init,
 	.exit		= rcar_gen3_phy_usb2_exit,
 	.power_on	= rcar_gen3_phy_usb2_power_on,
+	.power_off	= rcar_gen3_phy_usb2_power_off,
 	.owner		= THIS_MODULE,
 };
 
 static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 {
 	struct rcar_gen3_chan *ch = _ch;
-	void __iomem *usb2_base = ch->usb2.base;
+	void __iomem *usb2_base = ch->base;
 	u32 status = readl(usb2_base + USB2_OBINTSTA);
 	irqreturn_t ret = IRQ_NONE;
 
@@ -251,10 +275,17 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{ .compatible = "renesas,usb2-phy-r8a7795" },
+	{ .compatible = "renesas,rcar-gen3-usb2-phy" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
 
+static const unsigned int rcar_gen3_phy_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
 static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -273,18 +304,30 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	channel->usb2.base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(channel->usb2.base))
-		return PTR_ERR(channel->usb2.base);
+	channel->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(channel->base))
+		return PTR_ERR(channel->base);
 
 	/* call request_irq for OTG */
 	irq = platform_get_irq(pdev, 0);
 	if (irq >= 0) {
+		int ret;
+
 		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
 				       IRQF_SHARED, dev_name(dev), channel);
 		if (irq < 0)
 			dev_err(dev, "No irq handler (%d)\n", irq);
 		channel->has_otg = true;
+		channel->extcon = devm_extcon_dev_allocate(dev,
+							rcar_gen3_phy_cable);
+		if (IS_ERR(channel->extcon))
+			return PTR_ERR(channel->extcon);
+
+		ret = devm_extcon_dev_register(dev, channel->extcon);
+		if (ret < 0) {
+			dev_err(dev, "Failed to register extcon\n");
+			return ret;
+		}
 	}
 
 	/* devm_phy_create() will call pm_runtime_enable(dev); */
@@ -294,6 +337,13 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		return PTR_ERR(channel->phy);
 	}
 
+	channel->vbus = devm_regulator_get_optional(dev, "vbus");
+	if (IS_ERR(channel->vbus)) {
+		if (PTR_ERR(channel->vbus) == -EPROBE_DEFER)
+			return PTR_ERR(channel->vbus);
+		channel->vbus = NULL;
+	}
+
 	phy_set_drvdata(channel->phy, channel);
 
 	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index f62d899063a3..d60b149cff0f 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -216,7 +216,7 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
 			init.parent_names = &clk_name;
 			init.num_parents = 1;
 		} else {
-			init.flags = CLK_IS_ROOT;
+			init.flags = 0;
 			init.parent_names = NULL;
 			init.num_parents = 0;
 		}