summaryrefslogtreecommitdiffstats
path: root/drivers/phy
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-12-27 02:01:18 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-12-27 02:01:18 +0100
commitdaf273350d96241752b00020940c07dc2cff2e0a (patch)
treec0a0557da09404455b6b4672fb9bd6f1147a8d16 /drivers/phy
parentMerge tag 'usb-ci-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/... (diff)
parentphy: omap-usb2: use *syscon* framework API to power on/off the PHY (diff)
downloadlinux-daf273350d96241752b00020940c07dc2cff2e0a.tar.xz
linux-daf273350d96241752b00020940c07dc2cff2e0a.zip
Merge tag 'phy-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes: phy: for 4.5 *) new PHY driver for hi6220 usb and rcar gen3 usb2 *) deprecate phy-omap-control driver. phy-omap-control driver was added when there was no proper infrastructure for doing control module initialization. The phy-omap-control driver is not an 'actual' PHY driver and it was just a hack to do PHY related control module initialization. Now with SYSCON framework in the kernel, control module setttings can be done using APIs provided by syscon. *) usbphy-internal pll creates the needed 480MHz and is also a supply-clock back to the core clock-controller in Rockchip SoCs. This is now modeled as a real clock. *) calibrate mt65xx usb3 PHY for better eye diagram and receiver sensitivity. *) Miscellaneous cleanups. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/Kconfig20
-rw-r--r--drivers/phy/Makefile2
-rw-r--r--drivers/phy/phy-berlin-usb.c3
-rw-r--r--drivers/phy/phy-brcmstb-sata.c47
-rw-r--r--drivers/phy/phy-hi6220-usb.c168
-rw-r--r--drivers/phy/phy-mt65xx-usb3.c106
-rw-r--r--drivers/phy/phy-omap-usb2.c94
-rw-r--r--drivers/phy/phy-rcar-gen3-usb2.c378
-rw-r--r--drivers/phy/phy-rockchip-usb.c287
-rw-r--r--drivers/phy/phy-sun4i-usb.c158
-rw-r--r--drivers/phy/phy-ti-pipe3.c302
11 files changed, 1331 insertions, 234 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 03cb3ea2d2c0..e7e117d5dbbe 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -118,6 +118,13 @@ config PHY_RCAR_GEN2
help
Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+config PHY_RCAR_GEN3_USB2
+ tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
+ depends on OF && ARCH_SHMOBILE
+ select GENERIC_PHY
+ help
+ Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
+
config OMAP_CONTROL_PHY
tristate "OMAP CONTROL PHY Driver"
depends on ARCH_OMAP2PLUS || COMPILE_TEST
@@ -215,6 +222,15 @@ config PHY_MT65XX_USB3
for mt65xx SoCs. it supports two usb2.0 ports and
one usb3.0 port.
+config PHY_HI6220_USB
+ tristate "hi6220 USB PHY support"
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI6220 USB PHY.
+
+ To compile this driver as a module, choose M here.
+
config PHY_SUN4I_USB
tristate "Allwinner sunxi SoC USB PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
@@ -374,11 +390,11 @@ config PHY_TUSB1210
config PHY_BRCMSTB_SATA
tristate "Broadcom STB SATA PHY driver"
- depends on ARCH_BRCMSTB
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC
depends on OF
select GENERIC_PHY
help
- Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
+ Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
Likely useful only with CONFIG_SATA_BRCMSTB enabled.
config PHY_CYGNUS_PCIE
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a81aa5..c80f09df3bb8 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -17,12 +17,14 @@ obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
+obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/phy-berlin-usb.c
index 797ba17c404f..2017751ede26 100644
--- a/drivers/phy/phy-berlin-usb.c
+++ b/drivers/phy/phy-berlin-usb.c
@@ -9,11 +9,9 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
@@ -195,7 +193,6 @@ static int phy_berlin_usb_probe(struct platform_device *pdev)
return PTR_ERR(phy);
}
- platform_set_drvdata(pdev, priv);
phy_set_drvdata(phy, priv);
phy_provider =
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index cd9dba820566..a23172ff40e3 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -26,13 +26,21 @@
#define SATA_MDIO_BANK_OFFSET 0x23c
#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4)
-#define SATA_MDIO_REG_SPACE_SIZE 0x1000
-#define SATA_MDIO_REG_LENGTH 0x1f00
#define MAX_PORTS 2
/* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_SPACE_SIZE 0x1000
+#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000
+
+/* The older SATA PHY registers duplicated per port registers within the map,
+ * rather than having a separate map per port.
+ */
+#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10
+
+enum brcm_sata_phy_version {
+ BRCM_SATA_PHY_28NM,
+ BRCM_SATA_PHY_40NM,
+};
struct brcm_sata_port {
int portnum;
@@ -44,11 +52,12 @@ struct brcm_sata_port {
struct brcm_sata_phy {
struct device *dev;
void __iomem *phy_base;
+ enum brcm_sata_phy_version version;
struct brcm_sata_port phys[MAX_PORTS];
};
-enum sata_mdio_phy_regs_28nm {
+enum sata_mdio_phy_regs {
PLL_REG_BANK_0 = 0x50,
PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
@@ -66,8 +75,16 @@ enum sata_mdio_phy_regs_28nm {
static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
{
struct brcm_sata_phy *priv = port->phy_priv;
+ u32 offset = 0;
+
+ if (priv->version == BRCM_SATA_PHY_28NM)
+ offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
+ else if (priv->version == BRCM_SATA_PHY_40NM)
+ offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
+ else
+ dev_err(priv->dev, "invalid phy version\n");
- return priv->phy_base + (port->portnum * SATA_MDIO_REG_SPACE_SIZE);
+ return priv->phy_base + (port->portnum * offset);
}
static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
@@ -86,7 +103,7 @@ static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
#define FMAX_VAL_DEFAULT 0x3df
#define FMAX_VAL_SSC 0x83
-static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
+static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
{
void __iomem *base = brcm_sata_phy_base(port);
struct brcm_sata_phy *priv = port->phy_priv;
@@ -117,18 +134,21 @@ static int brcm_sata_phy_init(struct phy *phy)
{
struct brcm_sata_port *port = phy_get_drvdata(phy);
- brcm_sata_cfg_ssc_28nm(port);
+ brcm_sata_cfg_ssc(port);
return 0;
}
-static const struct phy_ops phy_ops_28nm = {
+static const struct phy_ops phy_ops = {
.init = brcm_sata_phy_init,
.owner = THIS_MODULE,
};
static const struct of_device_id brcm_sata_phy_of_match[] = {
- { .compatible = "brcm,bcm7445-sata-phy" },
+ { .compatible = "brcm,bcm7445-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_28NM },
+ { .compatible = "brcm,bcm7425-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_40NM },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -137,6 +157,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *dn = dev->of_node, *child;
+ const struct of_device_id *of_id;
struct brcm_sata_phy *priv;
struct resource *res;
struct phy_provider *provider;
@@ -156,6 +177,12 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
if (IS_ERR(priv->phy_base))
return PTR_ERR(priv->phy_base);
+ of_id = of_match_node(brcm_sata_phy_of_match, dn);
+ if (of_id)
+ priv->version = (enum brcm_sata_phy_version)of_id->data;
+ else
+ priv->version = BRCM_SATA_PHY_28NM;
+
for_each_available_child_of_node(dn, child) {
unsigned int id;
struct brcm_sata_port *port;
@@ -181,7 +208,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
port = &priv->phys[id];
port->portnum = id;
port->phy_priv = priv;
- port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
+ port->phy = devm_phy_create(dev, child, &phy_ops);
port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
if (IS_ERR(port->phy)) {
dev_err(dev, "failed to create PHY\n");
diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/phy-hi6220-usb.c
new file mode 100644
index 000000000000..b2141cbd4cf6
--- /dev/null
+++ b/drivers/phy/phy-hi6220-usb.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+#define SC_PERIPH_CTRL4 0x00c
+
+#define CTRL4_PICO_SIDDQ BIT(6)
+#define CTRL4_PICO_OGDISABLE BIT(8)
+#define CTRL4_PICO_VBUSVLDEXT BIT(10)
+#define CTRL4_PICO_VBUSVLDEXTSEL BIT(11)
+#define CTRL4_OTG_PHY_SEL BIT(21)
+
+#define SC_PERIPH_CTRL5 0x010
+
+#define CTRL5_USBOTG_RES_SEL BIT(3)
+#define CTRL5_PICOPHY_ACAENB BIT(4)
+#define CTRL5_PICOPHY_BC_MODE BIT(5)
+#define CTRL5_PICOPHY_CHRGSEL BIT(6)
+#define CTRL5_PICOPHY_VDATSRCEND BIT(7)
+#define CTRL5_PICOPHY_VDATDETENB BIT(8)
+#define CTRL5_PICOPHY_DCDENB BIT(9)
+#define CTRL5_PICOPHY_IDDIG BIT(10)
+
+#define SC_PERIPH_CTRL8 0x018
+#define SC_PERIPH_RSTEN0 0x300
+#define SC_PERIPH_RSTDIS0 0x304
+
+#define RST0_USBOTG_BUS BIT(4)
+#define RST0_POR_PICOPHY BIT(5)
+#define RST0_USBOTG BIT(6)
+#define RST0_USBOTG_32K BIT(7)
+
+#define EYE_PATTERN_PARA 0x7053348c
+
+struct hi6220_priv {
+ struct regmap *reg;
+ struct device *dev;
+};
+
+static void hi6220_phy_init(struct hi6220_priv *priv)
+{
+ struct regmap *reg = priv->reg;
+ u32 val, mask;
+
+ val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+ RST0_USBOTG | RST0_USBOTG_32K;
+ mask = val;
+ regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
+ regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
+}
+
+static int hi6220_phy_setup(struct hi6220_priv *priv, bool on)
+{
+ struct regmap *reg = priv->reg;
+ u32 val, mask;
+ int ret;
+
+ if (on) {
+ val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
+ mask = val | CTRL5_PICOPHY_BC_MODE;
+ ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
+ if (ret)
+ goto out;
+
+ val = CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
+ CTRL4_OTG_PHY_SEL;
+ mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
+ ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
+ if (ret)
+ goto out;
+ } else {
+ val = CTRL4_PICO_SIDDQ;
+ mask = val;
+ ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+ if (ret)
+ goto out;
+ }
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to setup phy ret: %d\n", ret);
+ return ret;
+}
+
+static int hi6220_phy_start(struct phy *phy)
+{
+ struct hi6220_priv *priv = phy_get_drvdata(phy);
+
+ return hi6220_phy_setup(priv, true);
+}
+
+static int hi6220_phy_exit(struct phy *phy)
+{
+ struct hi6220_priv *priv = phy_get_drvdata(phy);
+
+ return hi6220_phy_setup(priv, false);
+}
+
+static struct phy_ops hi6220_phy_ops = {
+ .init = hi6220_phy_start,
+ .exit = hi6220_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int hi6220_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct phy *phy;
+ struct hi6220_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->reg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,peripheral-syscon");
+ if (IS_ERR(priv->reg)) {
+ dev_err(dev, "no hisilicon,peripheral-syscon\n");
+ return PTR_ERR(priv->reg);
+ }
+
+ hi6220_phy_init(priv);
+
+ phy = devm_phy_create(dev, NULL, &hi6220_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi6220_phy_of_match[] = {
+ {.compatible = "hisilicon,hi6220-usb-phy",},
+ { },
+};
+MODULE_DEVICE_TABLE(of, hi6220_phy_of_match);
+
+static struct platform_driver hi6220_phy_driver = {
+ .probe = hi6220_phy_probe,
+ .driver = {
+ .name = "hi6220-usb-phy",
+ .of_match_table = hi6220_phy_of_match,
+ }
+};
+module_platform_driver(hi6220_phy_driver);
+
+MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver");
+MODULE_ALIAS("platform:hi6220-usb-phy");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
index e427c3b788ff..c0e7b4b0cf5c 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
@@ -27,6 +28,7 @@
* relative to USB3_SIF2_BASE base address
*/
#define SSUSB_SIFSLV_SPLLC 0x0000
+#define SSUSB_SIFSLV_U2FREQ 0x0100
/* offsets of sub-segment in each port registers */
#define SSUSB_SIFSLV_U2PHY_COM_BASE 0x0000
@@ -41,6 +43,7 @@
#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
#define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
+#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15)
#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
@@ -49,6 +52,8 @@
#define PA6_RG_U2_ISO_EN BIT(31)
#define PA6_RG_U2_BC11_SW_EN BIT(23)
#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
+#define PA6_RG_U2_SQTH GENMASK(3, 0)
+#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
#define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
#define P2C_RG_USB20_GPIO_CTL BIT(9)
@@ -111,6 +116,24 @@
#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
+#define U3P_U2FREQ_FMCR0 (SSUSB_SIFSLV_U2FREQ + 0x00)
+#define P2F_RG_MONCLK_SEL GENMASK(27, 26)
+#define P2F_RG_MONCLK_SEL_VAL(x) ((0x3 & (x)) << 26)
+#define P2F_RG_FREQDET_EN BIT(24)
+#define P2F_RG_CYCLECNT GENMASK(23, 0)
+#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x))
+
+#define U3P_U2FREQ_VALUE (SSUSB_SIFSLV_U2FREQ + 0x0c)
+
+#define U3P_U2FREQ_FMMONR1 (SSUSB_SIFSLV_U2FREQ + 0x10)
+#define P2F_USB_FM_VALID BIT(0)
+#define P2F_RG_FRCK_EN BIT(8)
+
+#define U3P_REF_CLK 26 /* MHZ */
+#define U3P_SLEW_RATE_COEF 28
+#define U3P_SR_COEF_DIVISOR 1000
+#define U3P_FM_DET_CYCLE_CNT 1024
+
struct mt65xx_phy_instance {
struct phy *phy;
void __iomem *port_base;
@@ -126,6 +149,77 @@ struct mt65xx_u3phy {
int nphys;
};
+static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy,
+ struct mt65xx_phy_instance *instance)
+{
+ void __iomem *sif_base = u3phy->sif_base;
+ int calibration_val;
+ int fm_out;
+ u32 tmp;
+
+ /* enable USB ring oscillator */
+ tmp = readl(instance->port_base + U3P_USBPHYACR5);
+ tmp |= PA5_RG_U2_HSTX_SRCAL_EN;
+ writel(tmp, instance->port_base + U3P_USBPHYACR5);
+ udelay(1);
+
+ /*enable free run clock */
+ tmp = readl(sif_base + U3P_U2FREQ_FMMONR1);
+ tmp |= P2F_RG_FRCK_EN;
+ writel(tmp, sif_base + U3P_U2FREQ_FMMONR1);
+
+ /* set cycle count as 1024, and select u2 channel */
+ tmp = readl(sif_base + U3P_U2FREQ_FMCR0);
+ tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
+ tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT);
+ tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index);
+ writel(tmp, sif_base + U3P_U2FREQ_FMCR0);
+
+ /* enable frequency meter */
+ tmp = readl(sif_base + U3P_U2FREQ_FMCR0);
+ tmp |= P2F_RG_FREQDET_EN;
+ writel(tmp, sif_base + U3P_U2FREQ_FMCR0);
+
+ /* ignore return value */
+ readl_poll_timeout(sif_base + U3P_U2FREQ_FMMONR1, tmp,
+ (tmp & P2F_USB_FM_VALID), 10, 200);
+
+ fm_out = readl(sif_base + U3P_U2FREQ_VALUE);
+
+ /* disable frequency meter */
+ tmp = readl(sif_base + U3P_U2FREQ_FMCR0);
+ tmp &= ~P2F_RG_FREQDET_EN;
+ writel(tmp, sif_base + U3P_U2FREQ_FMCR0);
+
+ /*disable free run clock */
+ tmp = readl(sif_base + U3P_U2FREQ_FMMONR1);
+ tmp &= ~P2F_RG_FRCK_EN;
+ writel(tmp, sif_base + U3P_U2FREQ_FMMONR1);
+
+ if (fm_out) {
+ /* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */
+ tmp = U3P_FM_DET_CYCLE_CNT * U3P_REF_CLK * U3P_SLEW_RATE_COEF;
+ tmp /= fm_out;
+ calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR);
+ } else {
+ /* if FM detection fail, set default value */
+ calibration_val = 4;
+ }
+ dev_dbg(u3phy->dev, "phy:%d, fm_out:%d, calib:%d\n",
+ instance->index, fm_out, calibration_val);
+
+ /* set HS slew rate */
+ tmp = readl(instance->port_base + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
+ tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val);
+ writel(tmp, instance->port_base + U3P_USBPHYACR5);
+
+ /* disable USB ring oscillator */
+ tmp = readl(instance->port_base + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HSTX_SRCAL_EN;
+ writel(tmp, instance->port_base + U3P_USBPHYACR5);
+}
+
static void phy_instance_init(struct mt65xx_u3phy *u3phy,
struct mt65xx_phy_instance *instance)
{
@@ -165,9 +259,10 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
writel(tmp, port_base + U3P_U2PHYDTM0);
}
- /* DP/DM BC1.1 path Disable */
tmp = readl(port_base + U3P_USBPHYACR6);
- tmp &= ~PA6_RG_U2_BC11_SW_EN;
+ tmp &= ~PA6_RG_U2_BC11_SW_EN; /* DP/DM BC1.1 path Disable */
+ tmp &= ~PA6_RG_U2_SQTH;
+ tmp |= PA6_RG_U2_SQTH_VAL(2);
writel(tmp, port_base + U3P_USBPHYACR6);
tmp = readl(port_base + U3P_U3PHYA_DA_REG0);
@@ -223,9 +318,9 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
writel(tmp, u3phy->sif_base + U3P_XTALCTL3);
- /* [mt8173]disable Change 100uA current from SSUSB */
+ /* [mt8173]switch 100uA current to SSUSB */
tmp = readl(port_base + U3P_USBPHYACR5);
- tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
+ tmp |= PA5_RG_U2_HS_100U_U3_EN;
writel(tmp, port_base + U3P_USBPHYACR5);
}
@@ -270,7 +365,7 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
writel(tmp, port_base + U3P_USBPHYACR6);
if (!index) {
- /* (also disable)Change 100uA current switch to USB2.0 */
+ /* switch 100uA current back to USB2.0 */
tmp = readl(port_base + U3P_USBPHYACR5);
tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
writel(tmp, port_base + U3P_USBPHYACR5);
@@ -340,6 +435,7 @@ static int mt65xx_phy_power_on(struct phy *phy)
struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
phy_instance_power_on(u3phy, instance);
+ hs_slew_rate_calibrate(u3phy, instance);
return 0;
}
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 0fe80589ffbe..c134989052f5 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -29,6 +29,8 @@
#include <linux/delay.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/phy/phy.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <linux/of_platform.h>
#define USB2PHY_DISCON_BYP_LATCH (1 << 31)
@@ -97,22 +99,38 @@ static int omap_usb_set_peripheral(struct usb_otg *otg,
return 0;
}
+static int omap_usb_phy_power(struct omap_usb *phy, int on)
+{
+ u32 val;
+ int ret;
+
+ if (!phy->syscon_phy_power) {
+ omap_control_phy_power(phy->control_dev, on);
+ return 0;
+ }
+
+ if (on)
+ val = phy->power_on;
+ else
+ val = phy->power_off;
+
+ ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
+ phy->mask, val);
+ return ret;
+}
+
static int omap_usb_power_off(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
- omap_control_phy_power(phy->control_dev, 0);
-
- return 0;
+ return omap_usb_phy_power(phy, false);
}
static int omap_usb_power_on(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
- omap_control_phy_power(phy->control_dev, 1);
-
- return 0;
+ return omap_usb_phy_power(phy, true);
}
static int omap_usb_init(struct phy *x)
@@ -147,21 +165,38 @@ static const struct phy_ops ops = {
static const struct usb_phy_data omap_usb2_data = {
.label = "omap_usb2",
.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
};
static const struct usb_phy_data omap5_usb2_data = {
.label = "omap5_usb2",
.flags = 0,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
};
static const struct usb_phy_data dra7x_usb2_data = {
.label = "dra7x_usb2",
.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
+};
+
+static const struct usb_phy_data dra7x_usb2_phy2_data = {
+ .label = "dra7x_usb2_phy2",
+ .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = OMAP_USB2_PHY_PD,
+ .power_off = OMAP_USB2_PHY_PD,
};
static const struct usb_phy_data am437x_usb2_data = {
.label = "am437x_usb2",
.flags = 0,
+ .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
+ AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
+ .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
+ .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
};
static const struct of_device_id omap_usb2_id_table[] = {
@@ -178,6 +213,10 @@ static const struct of_device_id omap_usb2_id_table[] = {
.data = &dra7x_usb2_data,
},
{
+ .compatible = "ti,dra7x-usb2-phy2",
+ .data = &dra7x_usb2_phy2_data,
+ },
+ {
.compatible = "ti,am437x-usb2",
.data = &am437x_usb2_data,
},
@@ -219,6 +258,9 @@ static int omap_usb2_probe(struct platform_device *pdev)
phy->phy.label = phy_data->label;
phy->phy.otg = otg;
phy->phy.type = USB_PHY_TYPE_USB2;
+ phy->mask = phy_data->mask;
+ phy->power_on = phy_data->power_on;
+ phy->power_off = phy_data->power_off;
if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -228,21 +270,36 @@ static int omap_usb2_probe(struct platform_device *pdev)
phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
}
- control_node = of_parse_phandle(node, "ctrl-module", 0);
- if (!control_node) {
- dev_err(&pdev->dev, "Failed to get control device phandle\n");
- return -EINVAL;
- }
+ phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
+ "syscon-phy-power");
+ if (IS_ERR(phy->syscon_phy_power)) {
+ dev_dbg(&pdev->dev,
+ "can't get syscon-phy-power, using control device\n");
+ phy->syscon_phy_power = NULL;
+
+ control_node = of_parse_phandle(node, "ctrl-module", 0);
+ if (!control_node) {
+ dev_err(&pdev->dev,
+ "Failed to get control device phandle\n");
+ return -EINVAL;
+ }
- control_pdev = of_find_device_by_node(control_node);
- if (!control_pdev) {
- dev_err(&pdev->dev, "Failed to get control device\n");
- return -EINVAL;
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(&pdev->dev, "Failed to get control device\n");
+ return -EINVAL;
+ }
+ phy->control_dev = &control_pdev->dev;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-phy-power", 1,
+ &phy->power_reg)) {
+ dev_err(&pdev->dev,
+ "couldn't get power reg. offset\n");
+ return -EINVAL;
+ }
}
- phy->control_dev = &control_pdev->dev;
- omap_control_phy_power(phy->control_dev, 0);
-
otg->set_host = omap_usb_set_host;
otg->set_peripheral = omap_usb_set_peripheral;
if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
@@ -261,6 +318,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
}
phy_set_drvdata(generic_phy, phy);
+ omap_usb_power_off(generic_phy);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
new file mode 100644
index 000000000000..ef332ef4abc7
--- /dev/null
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -0,0 +1,378 @@
+/*
+ * Renesas R-Car Gen3 for USB2.0 PHY driver
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * This is based on the phy-rcar-gen2 driver:
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/******* USB2.0 Host registers (original offset is +0x200) *******/
+#define USB2_INT_ENABLE 0x000
+#define USB2_USBCTR 0x00c
+#define USB2_SPD_RSM_TIMSET 0x10c
+#define USB2_OC_TIMSET 0x110
+#define USB2_COMMCTRL 0x600
+#define USB2_OBINTSTA 0x604
+#define USB2_OBINTEN 0x608
+#define USB2_VBCTRL 0x60c
+#define USB2_LINECTRL1 0x610
+#define USB2_ADPCTRL 0x630
+
+/* INT_ENABLE */
+#define USB2_INT_ENABLE_UCOM_INTEN BIT(3)
+#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2)
+#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1)
+#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_UCOM_INTEN | \
+ USB2_INT_ENABLE_USBH_INTB_EN | \
+ USB2_INT_ENABLE_USBH_INTA_EN)
+
+/* USBCTR */
+#define USB2_USBCTR_DIRPD BIT(2)
+#define USB2_USBCTR_PLL_RST BIT(1)
+
+/* SPD_RSM_TIMSET */
+#define USB2_SPD_RSM_TIMSET_INIT 0x014e029b
+
+/* OC_TIMSET */
+#define USB2_OC_TIMSET_INIT 0x000209ab
+
+/* COMMCTRL */
+#define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */
+
+/* OBINTSTA and OBINTEN */
+#define USB2_OBINT_SESSVLDCHG BIT(12)
+#define USB2_OBINT_IDDIGCHG BIT(11)
+#define USB2_OBINT_BITS (USB2_OBINT_SESSVLDCHG | \
+ USB2_OBINT_IDDIGCHG)
+
+/* VBCTRL */
+#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
+
+/* LINECTRL1 */
+#define USB2_LINECTRL1_DPRPD_EN BIT(19)
+#define USB2_LINECTRL1_DP_RPD BIT(18)
+#define USB2_LINECTRL1_DMRPD_EN BIT(17)
+#define USB2_LINECTRL1_DM_RPD BIT(16)
+
+/* ADPCTRL */
+#define USB2_ADPCTRL_OTGSESSVLD BIT(20)
+#define USB2_ADPCTRL_IDDIG BIT(19)
+#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
+#define USB2_ADPCTRL_DRVVBUS BIT(4)
+
+/******* HSUSB registers (original offset is +0x100) *******/
+#define HSUSB_LPSTS 0x02
+#define HSUSB_UGCTRL2 0x84
+
+/* Low Power Status register (LPSTS) */
+#define HSUSB_LPSTS_SUSPM 0x4000
+
+/* USB General control register 2 (UGCTRL2) */
+#define HSUSB_UGCTRL2_MASK 0x00000031 /* bit[31:6] should be 0 */
+#define HSUSB_UGCTRL2_USB0SEL 0x00000030
+#define HSUSB_UGCTRL2_USB0SEL_HOST 0x00000010
+#define HSUSB_UGCTRL2_USB0SEL_HS_USB 0x00000020
+#define HSUSB_UGCTRL2_USB0SEL_OTG 0x00000030
+
+struct rcar_gen3_data {
+ void __iomem *base;
+ struct clk *clk;
+};
+
+struct rcar_gen3_chan {
+ struct rcar_gen3_data usb2;
+ struct rcar_gen3_data hsusb;
+ struct phy *phy;
+};
+
+static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
+{
+ void __iomem *usb2_base = ch->usb2.base;
+ u32 val = readl(usb2_base + USB2_COMMCTRL);
+
+ dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
+ if (host)
+ val &= ~USB2_COMMCTRL_OTG_PERI;
+ else
+ val |= USB2_COMMCTRL_OTG_PERI;
+ writel(val, usb2_base + USB2_COMMCTRL);
+}
+
+static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
+{
+ void __iomem *usb2_base = ch->usb2.base;
+ u32 val = readl(usb2_base + USB2_LINECTRL1);
+
+ dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
+ val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
+ if (dp)
+ val |= USB2_LINECTRL1_DP_RPD;
+ if (dm)
+ val |= USB2_LINECTRL1_DM_RPD;
+ writel(val, usb2_base + USB2_LINECTRL1);
+}
+
+static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
+{
+ void __iomem *usb2_base = ch->usb2.base;
+ u32 val = readl(usb2_base + USB2_ADPCTRL);
+
+ dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
+ if (vbus)
+ val |= USB2_ADPCTRL_DRVVBUS;
+ else
+ val &= ~USB2_ADPCTRL_DRVVBUS;
+ writel(val, usb2_base + USB2_ADPCTRL);
+}
+
+static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
+{
+ rcar_gen3_set_linectrl(ch, 1, 1);
+ rcar_gen3_set_host_mode(ch, 1);
+ rcar_gen3_enable_vbus_ctrl(ch, 1);
+}
+
+static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
+{
+ rcar_gen3_set_linectrl(ch, 0, 1);
+ rcar_gen3_set_host_mode(ch, 0);
+ rcar_gen3_enable_vbus_ctrl(ch, 0);
+}
+
+static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
+{
+ return !!(readl(ch->usb2.base + USB2_ADPCTRL) &
+ USB2_ADPCTRL_OTGSESSVLD);
+}
+
+static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
+{
+ return !!(readl(ch->usb2.base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
+}
+
+static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
+{
+ bool is_host = true;
+
+ /* B-device? */
+ if (rcar_gen3_check_id(ch) && rcar_gen3_check_vbus(ch))
+ is_host = false;
+
+ if (is_host)
+ rcar_gen3_init_for_host(ch);
+ else
+ rcar_gen3_init_for_peri(ch);
+}
+
+static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
+{
+ void __iomem *usb2_base = ch->usb2.base;
+ u32 val;
+
+ val = readl(usb2_base + USB2_VBCTRL);
+ writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
+ writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+ val = readl(usb2_base + USB2_OBINTEN);
+ writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+ val = readl(usb2_base + USB2_ADPCTRL);
+ writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
+ val = readl(usb2_base + USB2_LINECTRL1);
+ rcar_gen3_set_linectrl(ch, 0, 0);
+ writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
+ usb2_base + USB2_LINECTRL1);
+
+ rcar_gen3_device_recognition(ch);
+}
+
+static int rcar_gen3_phy_usb2_init(struct phy *p)
+{
+ struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ void __iomem *usb2_base = channel->usb2.base;
+ void __iomem *hsusb_base = channel->hsusb.base;
+ u32 val;
+
+ /* Initialize USB2 part */
+ writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
+ writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
+ writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
+
+ /* Initialize HSUSB part */
+ if (hsusb_base) {
+ val = readl(hsusb_base + HSUSB_UGCTRL2);
+ val = (val & ~HSUSB_UGCTRL2_USB0SEL) |
+ HSUSB_UGCTRL2_USB0SEL_OTG;
+ writel(val & HSUSB_UGCTRL2_MASK, hsusb_base + HSUSB_UGCTRL2);
+
+ /* Initialize otg part */
+ rcar_gen3_init_otg(channel);
+ }
+
+ return 0;
+}
+
+static int rcar_gen3_phy_usb2_exit(struct phy *p)
+{
+ struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+
+ writel(0, channel->usb2.base + USB2_INT_ENABLE);
+
+ return 0;
+}
+
+static int rcar_gen3_phy_usb2_power_on(struct phy *p)
+{
+ struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ void __iomem *usb2_base = channel->usb2.base;
+ void __iomem *hsusb_base = channel->hsusb.base;
+ u32 val;
+
+ val = readl(usb2_base + USB2_USBCTR);
+ val |= USB2_USBCTR_PLL_RST;
+ writel(val, usb2_base + USB2_USBCTR);
+ val &= ~USB2_USBCTR_PLL_RST;
+ writel(val, usb2_base + USB2_USBCTR);
+
+ /*
+ * TODO: To reduce power consuming, this driver should set the SUSPM
+ * after the PHY detects ID pin as peripheral.
+ */
+ if (hsusb_base) {
+ /* Power on HSUSB PHY */
+ val = readw(hsusb_base + HSUSB_LPSTS);
+ val |= HSUSB_LPSTS_SUSPM;
+ writew(val, hsusb_base + HSUSB_LPSTS);
+ }
+
+ return 0;
+}
+
+static int rcar_gen3_phy_usb2_power_off(struct phy *p)
+{
+ struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ void __iomem *hsusb_base = channel->hsusb.base;
+ u32 val;
+
+ if (hsusb_base) {
+ /* Power off HSUSB PHY */
+ val = readw(hsusb_base + HSUSB_LPSTS);
+ val &= ~HSUSB_LPSTS_SUSPM;
+ writew(val, hsusb_base + HSUSB_LPSTS);
+ }
+
+ return 0;
+}
+
+static struct phy_ops rcar_gen3_phy_usb2_ops = {
+ .init = rcar_gen3_phy_usb2_init,
+ .exit = rcar_gen3_phy_usb2_exit,
+ .power_on = rcar_gen3_phy_usb2_power_on,
+ .power_off = rcar_gen3_phy_usb2_power_off,
+ .owner = THIS_MODULE,
+};
+
+static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
+{
+ struct rcar_gen3_chan *ch = _ch;
+ void __iomem *usb2_base = ch->usb2.base;
+ u32 status = readl(usb2_base + USB2_OBINTSTA);
+ irqreturn_t ret = IRQ_NONE;
+
+ if (status & USB2_OBINT_BITS) {
+ dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status);
+ writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+ rcar_gen3_device_recognition(ch);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
+ { .compatible = "renesas,usb2-phy-r8a7795" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
+
+static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rcar_gen3_chan *channel;
+ struct phy_provider *provider;
+ struct resource *res;
+
+ if (!dev->of_node) {
+ dev_err(dev, "This driver needs device tree\n");
+ return -EINVAL;
+ }
+
+ channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
+ if (!channel)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2_host");
+ channel->usb2.base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(channel->usb2.base))
+ return PTR_ERR(channel->usb2.base);
+
+ /* "hsusb" memory resource is optional */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsusb");
+
+ /* To avoid error message by devm_ioremap_resource() */
+ if (res) {
+ int irq;
+
+ channel->hsusb.base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(channel->hsusb.base))
+ channel->hsusb.base = NULL;
+ /* call request_irq for OTG */
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
+ IRQF_SHARED, dev_name(dev),
+ channel);
+ if (irq < 0)
+ dev_err(dev, "No irq handler (%d)\n", irq);
+ }
+
+ /* devm_phy_create() will call pm_runtime_enable(dev); */
+ channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops);
+ if (IS_ERR(channel->phy)) {
+ dev_err(dev, "Failed to create USB2 PHY\n");
+ return PTR_ERR(channel->phy);
+ }
+
+ phy_set_drvdata(channel->phy, channel);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider))
+ dev_err(dev, "Failed to register PHY provider\n");
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static struct platform_driver rcar_gen3_phy_usb2_driver = {
+ .driver = {
+ .name = "phy_rcar_gen3_usb2",
+ .of_match_table = rcar_gen3_phy_usb2_match_table,
+ },
+ .probe = rcar_gen3_phy_usb2_probe,
+};
+module_platform_driver(rcar_gen3_phy_usb2_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index 62c43c435194..33a80eba1cb4 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -15,12 +15,14 @@
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
@@ -36,120 +38,281 @@
#define SIDDQ_ON BIT(13)
#define SIDDQ_OFF (0 << 13)
+struct rockchip_usb_phys {
+ int reg;
+ const char *pll_name;
+};
+
+struct rockchip_usb_phy_pdata {
+ struct rockchip_usb_phys *phys;
+};
+
+struct rockchip_usb_phy_base {
+ struct device *dev;
+ struct regmap *reg_base;
+ const struct rockchip_usb_phy_pdata *pdata;
+};
+
struct rockchip_usb_phy {
+ struct rockchip_usb_phy_base *base;
+ struct device_node *np;
unsigned int reg_offset;
- struct regmap *reg_base;
struct clk *clk;
+ struct clk *clk480m;
+ struct clk_hw clk480m_hw;
struct phy *phy;
};
static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
bool siddq)
{
- return regmap_write(phy->reg_base, phy->reg_offset,
+ return regmap_write(phy->base->reg_base, phy->reg_offset,
SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF));
}
-static int rockchip_usb_phy_power_off(struct phy *_phy)
+static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
- struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
- int ret = 0;
+ return 480000000;
+}
+
+static void rockchip_usb_phy480m_disable(struct clk_hw *hw)
+{
+ struct rockchip_usb_phy *phy = container_of(hw,
+ struct rockchip_usb_phy,
+ clk480m_hw);
/* Power down usb phy analog blocks by set siddq 1 */
- ret = rockchip_usb_phy_power(phy, 1);
- if (ret)
- return ret;
+ rockchip_usb_phy_power(phy, 1);
+}
- clk_disable_unprepare(phy->clk);
+static int rockchip_usb_phy480m_enable(struct clk_hw *hw)
+{
+ struct rockchip_usb_phy *phy = container_of(hw,
+ struct rockchip_usb_phy,
+ clk480m_hw);
- return 0;
+ /* Power up usb phy analog blocks by set siddq 0 */
+ return rockchip_usb_phy_power(phy, 0);
}
-static int rockchip_usb_phy_power_on(struct phy *_phy)
+static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw)
{
- struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
- int ret = 0;
+ struct rockchip_usb_phy *phy = container_of(hw,
+ struct rockchip_usb_phy,
+ clk480m_hw);
+ int ret;
+ u32 val;
- ret = clk_prepare_enable(phy->clk);
- if (ret)
+ ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val);
+ if (ret < 0)
return ret;
- /* Power up usb phy analog blocks by set siddq 0 */
- ret = rockchip_usb_phy_power(phy, 0);
- if (ret) {
- clk_disable_unprepare(phy->clk);
- return ret;
- }
+ return (val & SIDDQ_ON) ? 0 : 1;
+}
+
+static const struct clk_ops rockchip_usb_phy480m_ops = {
+ .enable = rockchip_usb_phy480m_enable,
+ .disable = rockchip_usb_phy480m_disable,
+ .is_enabled = rockchip_usb_phy480m_is_enabled,
+ .recalc_rate = rockchip_usb_phy480m_recalc_rate,
+};
+
+static int rockchip_usb_phy_power_off(struct phy *_phy)
+{
+ struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+ clk_disable_unprepare(phy->clk480m);
return 0;
}
+static int rockchip_usb_phy_power_on(struct phy *_phy)
+{
+ struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+ return clk_prepare_enable(phy->clk480m);
+}
+
static const struct phy_ops ops = {
.power_on = rockchip_usb_phy_power_on,
.power_off = rockchip_usb_phy_power_off,
.owner = THIS_MODULE,
};
-static int rockchip_usb_phy_probe(struct platform_device *pdev)
+static void rockchip_usb_phy_action(void *data)
+{
+ struct rockchip_usb_phy *rk_phy = data;
+
+ of_clk_del_provider(rk_phy->np);
+ clk_unregister(rk_phy->clk480m);
+
+ if (rk_phy->clk)
+ clk_put(rk_phy->clk);
+}
+
+static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
+ struct device_node *child)
{
- struct device *dev = &pdev->dev;
struct rockchip_usb_phy *rk_phy;
- struct phy_provider *phy_provider;
- struct device_node *child;
- struct regmap *grf;
unsigned int reg_offset;
- int err;
+ const char *clk_name;
+ struct clk_init_data init;
+ int err, i;
- grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
- if (IS_ERR(grf)) {
- dev_err(&pdev->dev, "Missing rockchip,grf property\n");
- return PTR_ERR(grf);
+ rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL);
+ if (!rk_phy)
+ return -ENOMEM;
+
+ rk_phy->base = base;
+ rk_phy->np = child;
+
+ if (of_property_read_u32(child, "reg", &reg_offset)) {
+ dev_err(base->dev, "missing reg property in node %s\n",
+ child->name);
+ return -EINVAL;
}
- for_each_available_child_of_node(dev->of_node, child) {
- rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
- if (!rk_phy) {
- err = -ENOMEM;
- goto put_child;
- }
+ rk_phy->reg_offset = reg_offset;
+
+ rk_phy->clk = of_clk_get_by_name(child, "phyclk");
+ if (IS_ERR(rk_phy->clk))
+ rk_phy->clk = NULL;
- if (of_property_read_u32(child, "reg", &reg_offset)) {
- dev_err(dev, "missing reg property in node %s\n",
- child->name);
- err = -EINVAL;
- goto put_child;
+ i = 0;
+ init.name = NULL;
+ while (base->pdata->phys[i].reg) {
+ if (base->pdata->phys[i].reg == reg_offset) {
+ init.name = base->pdata->phys[i].pll_name;
+ break;
}
+ i++;
+ }
- rk_phy->reg_offset = reg_offset;
- rk_phy->reg_base = grf;
+ if (!init.name) {
+ dev_err(base->dev, "phy data not found\n");
+ return -EINVAL;
+ }
- rk_phy->clk = of_clk_get_by_name(child, "phyclk");
- if (IS_ERR(rk_phy->clk))
- rk_phy->clk = NULL;
+ if (rk_phy->clk) {
+ clk_name = __clk_get_name(rk_phy->clk);
+ init.flags = 0;
+ init.parent_names = &clk_name;
+ init.num_parents = 1;
+ } else {
+ init.flags = CLK_IS_ROOT;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ }
- rk_phy->phy = devm_phy_create(dev, child, &ops);
- if (IS_ERR(rk_phy->phy)) {
- dev_err(dev, "failed to create PHY\n");
- err = PTR_ERR(rk_phy->phy);
- goto put_child;
- }
- phy_set_drvdata(rk_phy->phy, rk_phy);
+ init.ops = &rockchip_usb_phy480m_ops;
+ rk_phy->clk480m_hw.init = &init;
- /* only power up usb phy when it use, so disable it when init*/
- err = rockchip_usb_phy_power(rk_phy, 1);
- if (err)
- goto put_child;
+ rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw);
+ if (IS_ERR(rk_phy->clk480m)) {
+ err = PTR_ERR(rk_phy->clk480m);
+ goto err_clk;
+ }
+
+ err = of_clk_add_provider(child, of_clk_src_simple_get,
+ rk_phy->clk480m);
+ if (err < 0)
+ goto err_clk_prov;
+
+ err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy);
+ if (err)
+ goto err_devm_action;
+
+ rk_phy->phy = devm_phy_create(base->dev, child, &ops);
+ if (IS_ERR(rk_phy->phy)) {
+ dev_err(base->dev, "failed to create PHY\n");
+ return PTR_ERR(rk_phy->phy);
+ }
+ phy_set_drvdata(rk_phy->phy, rk_phy);
+
+ /* only power up usb phy when it use, so disable it when init*/
+ return rockchip_usb_phy_power(rk_phy, 1);
+
+err_devm_action:
+ of_clk_del_provider(child);
+err_clk_prov:
+ clk_unregister(rk_phy->clk480m);
+err_clk:
+ if (rk_phy->clk)
+ clk_put(rk_phy->clk);
+ return err;
+}
+
+static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
+ .phys = (struct rockchip_usb_phys[]){
+ { .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" },
+ { .reg = 0x188, .pll_name = "sclk_otgphy1_480m" },
+ { /* sentinel */ }
+ },
+};
+
+static const struct rockchip_usb_phy_pdata rk3188_pdata = {
+ .phys = (struct rockchip_usb_phys[]){
+ { .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
+ { .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
+ { /* sentinel */ }
+ },
+};
+
+static const struct rockchip_usb_phy_pdata rk3288_pdata = {
+ .phys = (struct rockchip_usb_phys[]){
+ { .reg = 0x320, .pll_name = "sclk_otgphy0_480m" },
+ { .reg = 0x334, .pll_name = "sclk_otgphy1_480m" },
+ { .reg = 0x348, .pll_name = "sclk_otgphy2_480m" },
+ { /* sentinel */ }
+ },
+};
+
+static int rockchip_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_usb_phy_base *phy_base;
+ struct phy_provider *phy_provider;
+ const struct of_device_id *match;
+ struct device_node *child;
+ int err;
+
+ phy_base = devm_kzalloc(dev, sizeof(*phy_base), GFP_KERNEL);
+ if (!phy_base)
+ return -ENOMEM;
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (!match || !match->data) {
+ dev_err(dev, "missing phy data\n");
+ return -EINVAL;
+ }
+
+ phy_base->pdata = match->data;
+
+ phy_base->dev = dev;
+ phy_base->reg_base = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,grf");
+ if (IS_ERR(phy_base->reg_base)) {
+ dev_err(&pdev->dev, "Missing rockchip,grf property\n");
+ return PTR_ERR(phy_base->reg_base);
+ }
+
+ for_each_available_child_of_node(dev->of_node, child) {
+ err = rockchip_usb_phy_init(phy_base, child);
+ if (err) {
+ of_node_put(child);
+ return err;
+ }
}
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
-put_child:
- of_node_put(child);
- return err;
}
static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
- { .compatible = "rockchip,rk3288-usb-phy" },
+ { .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata },
+ { .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata },
+ { .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata },
{}
};
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index b12964b70625..bae54f7a1f48 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -32,6 +32,7 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include <linux/phy/phy-sun4i-usb.h>
@@ -46,6 +47,9 @@
#define REG_PHYBIST 0x08
#define REG_PHYTUNE 0x0c
#define REG_PHYCTL_A33 0x10
+#define REG_PHY_UNK_H3 0x20
+
+#define REG_PMU_UNK_H3 0x10
#define PHYCTL_DATA BIT(7)
@@ -79,7 +83,7 @@
#define PHY_DISCON_TH_SEL 0x2a
#define PHY_SQUELCH_DETECT 0x3c
-#define MAX_PHYS 3
+#define MAX_PHYS 4
/*
* Note do not raise the debounce time, we must report Vusb high within 100ms
@@ -88,12 +92,24 @@
#define DEBOUNCE_TIME msecs_to_jiffies(50)
#define POLL_TIME msecs_to_jiffies(250)
+enum sun4i_usb_phy_type {
+ sun4i_a10_phy,
+ sun8i_a33_phy,
+ sun8i_h3_phy,
+};
+
+struct sun4i_usb_phy_cfg {
+ int num_phys;
+ enum sun4i_usb_phy_type type;
+ u32 disc_thresh;
+ u8 phyctl_offset;
+ bool dedicated_clocks;
+};
+
struct sun4i_usb_phy_data {
void __iomem *base;
+ const struct sun4i_usb_phy_cfg *cfg;
struct mutex mutex;
- int num_phys;
- u32 disc_thresh;
- bool has_a33_phyctl;
struct sun4i_usb_phy {
struct phy *phy;
void __iomem *pmu;
@@ -159,17 +175,14 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
{
struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
u32 temp, usbc_bit = BIT(phy->index * 2);
- void *phyctl;
+ void *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
int i;
mutex_lock(&phy_data->mutex);
- if (phy_data->has_a33_phyctl) {
- phyctl = phy_data->base + REG_PHYCTL_A33;
+ if (phy_data->cfg->type == sun8i_a33_phy) {
/* A33 needs us to set phyctl to 0 explicitly */
writel(0, phyctl);
- } else {
- phyctl = phy_data->base + REG_PHYCTL_A10;
}
for (i = 0; i < len; i++) {
@@ -230,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy *_phy)
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
int ret;
+ u32 val;
ret = clk_prepare_enable(phy->clk);
if (ret)
@@ -241,15 +255,26 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
- /* Enable USB 45 Ohm resistor calibration */
- if (phy->index == 0)
- sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
+ if (data->cfg->type == sun8i_h3_phy) {
+ if (phy->index == 0) {
+ val = readl(data->base + REG_PHY_UNK_H3);
+ writel(val & ~1, data->base + REG_PHY_UNK_H3);
+ }
- /* Adjust PHY's magnitude and rate */
- sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+ val = readl(phy->pmu + REG_PMU_UNK_H3);
+ writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
+ } else {
+ /* Enable USB 45 Ohm resistor calibration */
+ if (phy->index == 0)
+ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
- /* Disconnect threshold adjustment */
- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2);
+ /* Adjust PHY's magnitude and rate */
+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+
+ /* Disconnect threshold adjustment */
+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+ data->cfg->disc_thresh, 2);
+ }
sun4i_usb_phy_passby(phy, 1);
@@ -476,7 +501,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
- if (args->args[0] >= data->num_phys)
+ if (args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@@ -511,7 +536,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct phy_provider *phy_provider;
- bool dedicated_clocks;
struct resource *res;
int i, ret;
@@ -522,29 +546,9 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
mutex_init(&data->mutex);
INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
dev_set_drvdata(dev, data);
-
- if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
- of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
- of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
- data->num_phys = 2;
- else
- data->num_phys = 3;
-
- if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") ||
- of_device_is_compatible(np, "allwinner,sun7i-a20-usb-phy"))
- data->disc_thresh = 2;
- else
- data->disc_thresh = 3;
-
- if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy") ||
- of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") ||
- of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
- dedicated_clocks = true;
- else
- dedicated_clocks = false;
-
- if (of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy"))
- data->has_a33_phyctl = true;
+ data->cfg = of_device_get_match_data(dev);
+ if (!data->cfg)
+ return -EINVAL;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
data->base = devm_ioremap_resource(dev, res);
@@ -590,7 +594,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
}
}
- for (i = 0; i < data->num_phys; i++) {
+ for (i = 0; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
@@ -602,7 +606,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
phy->vbus = NULL;
}
- if (dedicated_clocks)
+ if (data->cfg->dedicated_clocks)
snprintf(name, sizeof(name), "usb%d_phy", i);
else
strlcpy(name, "usb_phy", sizeof(name));
@@ -689,13 +693,69 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
return 0;
}
+static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
+ .num_phys = 3,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
+ .num_phys = 2,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 2,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
+ .num_phys = 3,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
+ .num_phys = 3,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 2,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
+ .num_phys = 2,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .dedicated_clocks = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
+ .num_phys = 2,
+ .type = sun8i_a33_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
+ .num_phys = 4,
+ .type = sun8i_h3_phy,
+ .disc_thresh = 3,
+ .dedicated_clocks = true,
+};
+
static const struct of_device_id sun4i_usb_phy_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-usb-phy" },
- { .compatible = "allwinner,sun5i-a13-usb-phy" },
- { .compatible = "allwinner,sun6i-a31-usb-phy" },
- { .compatible = "allwinner,sun7i-a20-usb-phy" },
- { .compatible = "allwinner,sun8i-a23-usb-phy" },
- { .compatible = "allwinner,sun8i-a33-usb-phy" },
+ { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
+ { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
+ { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
+ { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
+ { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
+ { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
+ { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
{ },
};
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 93bc1120af12..0a477d24cf76 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -56,6 +56,18 @@
#define SATA_PLL_SOFT_RESET BIT(18)
+#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
+#define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14
+
+#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
+#define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22
+
+#define PIPE3_PHY_TX_RX_POWERON 0x3
+#define PIPE3_PHY_TX_RX_POWEROFF 0x0
+
+#define PCIE_PCS_MASK 0xFF0000
+#define PCIE_PCS_DELAY_COUNT_SHIFT 0x10
+
/*
* This is an Empirical value that works, need to confirm the actual
* value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
@@ -86,8 +98,12 @@ struct ti_pipe3 {
struct clk *refclk;
struct clk *div_clk;
struct pipe3_dpll_map *dpll_map;
+ struct regmap *phy_power_syscon; /* ctrl. reg. acces */
+ struct regmap *pcs_syscon; /* ctrl. reg. acces */
struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */
unsigned int dpll_reset_reg; /* reg. index within syscon */
+ unsigned int power_reg; /* power reg. index within syscon */
+ unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */
bool sata_refclk_enabled;
};
@@ -144,20 +160,49 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
static int ti_pipe3_power_off(struct phy *x)
{
+ u32 val;
+ int ret;
struct ti_pipe3 *phy = phy_get_drvdata(x);
- omap_control_phy_power(phy->control_dev, 0);
+ if (!phy->phy_power_syscon) {
+ omap_control_phy_power(phy->control_dev, 0);
+ return 0;
+ }
- return 0;
+ val = PIPE3_PHY_TX_RX_POWEROFF << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+
+ ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+ PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val);
+ return ret;
}
static int ti_pipe3_power_on(struct phy *x)
{
+ u32 val;
+ u32 mask;
+ int ret;
+ unsigned long rate;
struct ti_pipe3 *phy = phy_get_drvdata(x);
- omap_control_phy_power(phy->control_dev, 1);
+ if (!phy->phy_power_syscon) {
+ omap_control_phy_power(phy->control_dev, 1);
+ return 0;
+ }
- return 0;
+ rate = clk_get_rate(phy->sys_clk);
+ if (!rate) {
+ dev_err(phy->dev, "Invalid clock rate\n");
+ return -EINVAL;
+ }
+ rate = rate / 1000000;
+ mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
+ val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+
+ ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+ mask, val);
+ return ret;
}
static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
@@ -229,8 +274,15 @@ static int ti_pipe3_init(struct phy *x)
* 18-1804.
*/
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
- omap_control_pcie_pcs(phy->control_dev, 0x96);
- return 0;
+ if (!phy->pcs_syscon) {
+ omap_control_pcie_pcs(phy->control_dev, 0x96);
+ return 0;
+ }
+
+ val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
+ ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
+ PCIE_PCS_MASK, val);
+ return ret;
}
/* Bring it out of IDLE if it is IDLE */
@@ -308,51 +360,15 @@ static const struct phy_ops ops = {
static const struct of_device_id ti_pipe3_id_table[];
-static int ti_pipe3_probe(struct platform_device *pdev)
+static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
{
- struct ti_pipe3 *phy;
- struct phy *generic_phy;
- struct phy_provider *phy_provider;
- struct resource *res;
- struct device_node *node = pdev->dev.of_node;
- struct device_node *control_node;
- struct platform_device *control_pdev;
- const struct of_device_id *match;
struct clk *clk;
+ struct device *dev = phy->dev;
+ struct device_node *node = dev->of_node;
- phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
- if (!phy)
- return -ENOMEM;
-
- phy->dev = &pdev->dev;
-
- if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- match = of_match_device(ti_pipe3_id_table, &pdev->dev);
- if (!match)
- return -EINVAL;
-
- phy->dpll_map = (struct pipe3_dpll_map *)match->data;
- if (!phy->dpll_map) {
- dev_err(&pdev->dev, "no DPLL data\n");
- return -EINVAL;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "pll_ctrl");
- phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(phy->pll_ctrl_base))
- return PTR_ERR(phy->pll_ctrl_base);
-
- phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
- if (IS_ERR(phy->sys_clk)) {
- dev_err(&pdev->dev, "unable to get sysclk\n");
- return -EINVAL;
- }
- }
-
- phy->refclk = devm_clk_get(phy->dev, "refclk");
+ phy->refclk = devm_clk_get(dev, "refclk");
if (IS_ERR(phy->refclk)) {
- dev_err(&pdev->dev, "unable to get refclk\n");
+ dev_err(dev, "unable to get refclk\n");
/* older DTBs have missing refclk in SATA PHY
* so don't bail out in case of SATA PHY.
*/
@@ -361,80 +377,194 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
- phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
+ phy->wkupclk = devm_clk_get(dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
- dev_err(&pdev->dev, "unable to get wkupclk\n");
+ dev_err(dev, "unable to get wkupclk\n");
return PTR_ERR(phy->wkupclk);
}
} else {
phy->wkupclk = ERR_PTR(-ENODEV);
- phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
- "syscon-pllreset");
- if (IS_ERR(phy->dpll_reset_syscon)) {
- dev_info(&pdev->dev,
- "can't get syscon-pllreset, sata dpll won't idle\n");
- phy->dpll_reset_syscon = NULL;
- } else {
- if (of_property_read_u32_index(node,
- "syscon-pllreset", 1,
- &phy->dpll_reset_reg)) {
- dev_err(&pdev->dev,
- "couldn't get pllreset reg. offset\n");
- return -EINVAL;
- }
+ }
+
+ if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") ||
+ phy->phy_power_syscon) {
+ phy->sys_clk = devm_clk_get(dev, "sysclk");
+ if (IS_ERR(phy->sys_clk)) {
+ dev_err(dev, "unable to get sysclk\n");
+ return -EINVAL;
}
}
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
-
- clk = devm_clk_get(phy->dev, "dpll_ref");
+ clk = devm_clk_get(dev, "dpll_ref");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get dpll ref clk\n");
+ dev_err(dev, "unable to get dpll ref clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 1500000000);
- clk = devm_clk_get(phy->dev, "dpll_ref_m2");
+ clk = devm_clk_get(dev, "dpll_ref_m2");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n");
+ dev_err(dev, "unable to get dpll ref m2 clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
- clk = devm_clk_get(phy->dev, "phy-div");
+ clk = devm_clk_get(dev, "phy-div");
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "unable to get phy-div clk\n");
+ dev_err(dev, "unable to get phy-div clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
- phy->div_clk = devm_clk_get(phy->dev, "div-clk");
+ phy->div_clk = devm_clk_get(dev, "div-clk");
if (IS_ERR(phy->div_clk)) {
- dev_err(&pdev->dev, "unable to get div-clk\n");
+ dev_err(dev, "unable to get div-clk\n");
return PTR_ERR(phy->div_clk);
}
} else {
phy->div_clk = ERR_PTR(-ENODEV);
}
- control_node = of_parse_phandle(node, "ctrl-module", 0);
- if (!control_node) {
- dev_err(&pdev->dev, "Failed to get control device phandle\n");
- return -EINVAL;
+ return 0;
+}
+
+static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
+{
+ struct device *dev = phy->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+
+ phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-phy-power");
+ if (IS_ERR(phy->phy_power_syscon)) {
+ dev_dbg(dev,
+ "can't get syscon-phy-power, using control device\n");
+ phy->phy_power_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-phy-power", 1,
+ &phy->power_reg)) {
+ dev_err(dev, "couldn't get power reg. offset\n");
+ return -EINVAL;
+ }
+ }
+
+ if (!phy->phy_power_syscon) {
+ control_node = of_parse_phandle(node, "ctrl-module", 0);
+ if (!control_node) {
+ dev_err(dev, "Failed to get control device phandle\n");
+ return -EINVAL;
+ }
+
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(dev, "Failed to get control device\n");
+ return -EINVAL;
+ }
+
+ phy->control_dev = &control_pdev->dev;
+ }
+
+ if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+ phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-pcs");
+ if (IS_ERR(phy->pcs_syscon)) {
+ dev_dbg(dev,
+ "can't get syscon-pcs, using omap control\n");
+ phy->pcs_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-pcs", 1,
+ &phy->pcie_pcs_reg)) {
+ dev_err(dev,
+ "couldn't get pcie pcs reg. offset\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+ phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-pllreset");
+ if (IS_ERR(phy->dpll_reset_syscon)) {
+ dev_info(dev,
+ "can't get syscon-pllreset, sata dpll won't idle\n");
+ phy->dpll_reset_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-pllreset", 1,
+ &phy->dpll_reset_reg)) {
+ dev_err(dev,
+ "couldn't get pllreset reg. offset\n");
+ return -EINVAL;
+ }
+ }
}
- control_pdev = of_find_device_by_node(control_node);
- if (!control_pdev) {
- dev_err(&pdev->dev, "Failed to get control device\n");
+ return 0;
+}
+
+static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
+{
+ struct resource *res;
+ const struct of_device_id *match;
+ struct device *dev = phy->dev;
+ struct device_node *node = dev->of_node;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
+ return 0;
+
+ match = of_match_device(ti_pipe3_id_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ phy->dpll_map = (struct pipe3_dpll_map *)match->data;
+ if (!phy->dpll_map) {
+ dev_err(dev, "no DPLL data\n");
return -EINVAL;
}
- phy->control_dev = &control_pdev->dev;
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "pll_ctrl");
+ phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(phy->pll_ctrl_base))
+ return PTR_ERR(phy->pll_ctrl_base);
+
+ return 0;
+}
- omap_control_phy_power(phy->control_dev, 0);
+static int ti_pipe3_probe(struct platform_device *pdev)
+{
+ struct ti_pipe3 *phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct device_node *node = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->dev = dev;
+
+ ret = ti_pipe3_get_pll_base(phy);
+ if (ret)
+ return ret;
+
+ ret = ti_pipe3_get_sysctrl(phy);
+ if (ret)
+ return ret;
+
+ ret = ti_pipe3_get_clk(phy);
+ if (ret)
+ return ret;
platform_set_drvdata(pdev, phy);
- pm_runtime_enable(phy->dev);
+ pm_runtime_enable(dev);
/*
* Prevent auto-disable of refclk for SATA PHY due to Errata i783
@@ -446,13 +576,15 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
}
- generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+ generic_phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
- phy_provider = devm_of_phy_provider_register(phy->dev,
- of_phy_simple_xlate);
+
+ ti_pipe3_power_off(generic_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);