diff options
| author | Manu Gautam <mgautam@codeaurora.org> | 2018-05-02 23:06:09 +0200 |
|---|---|---|
| committer | Kishon Vijay Abraham I <kishon@ti.com> | 2018-05-20 18:21:27 +0200 |
| commit | fdf37e1a1f050c5f03fbede28cc1b48f3cc80705 (patch) | |
| tree | 344b07b38a139b3145a1510a25c47bfc443725d3 /drivers/phy | |
| parent | phy: stm32: fix usbphyc static checker and checkpatch warnings (diff) | |
| download | linux-fdf37e1a1f050c5f03fbede28cc1b48f3cc80705.tar.xz linux-fdf37e1a1f050c5f03fbede28cc1b48f3cc80705.zip | |
phy: qcom-qmp: Enable pipe_clk before PHY initialization
QMP PHY for USB/PCIE requires pipe_clk for locking of
retime buffers at the pipe interface. Driver checks for
PHY_STATUS without enabling pipe_clk due to which
phy_init() fails with initialization timeout.
Though pipe_clk is output from PHY (after PLL is programmed
during initialization sequence) to GCC clock_ctl and then fed
back to PHY but for PHY_STATUS register to reflect successful
initialization pipe_clk from GCC must be present.
Since, clock driver now ignores status_check for pipe_clk on
clk_enable/disable, driver can safely enable/disable pipe_clk
from phy_init/exit.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.c | 22 |
1 files changed, 8 insertions, 14 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 6470c5d61d1c..fddb1c93bd89 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -793,19 +793,6 @@ static void qcom_qmp_phy_configure(void __iomem *base, } } -static int qcom_qmp_phy_poweron(struct phy *phy) -{ - struct qmp_phy *qphy = phy_get_drvdata(phy); - struct qcom_qmp *qmp = qphy->qmp; - int ret; - - ret = clk_prepare_enable(qphy->pipe_clk); - if (ret) - dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret); - - return ret; -} - static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; @@ -974,6 +961,12 @@ static int qcom_qmp_phy_init(struct phy *phy) } } + ret = clk_prepare_enable(qphy->pipe_clk); + if (ret) { + dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret); + goto err_clk_enable; + } + /* Tx, Rx, and PCS configurations */ qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); /* Configuration for other LANE for USB-DP combo PHY */ @@ -1019,6 +1012,8 @@ static int qcom_qmp_phy_init(struct phy *phy) return ret; err_pcs_ready: + clk_disable_unprepare(qphy->pipe_clk); +err_clk_enable: if (cfg->has_lane_rst) reset_control_assert(qphy->lane_rst); err_lane_rst: @@ -1283,7 +1278,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) static const struct phy_ops qcom_qmp_phy_gen_ops = { .init = qcom_qmp_phy_init, .exit = qcom_qmp_phy_exit, - .power_on = qcom_qmp_phy_poweron, .set_mode = qcom_qmp_phy_set_mode, .owner = THIS_MODULE, }; |