diff options
| author | Sjoerd Simons <sjoerd.simons@collabora.co.uk> | 2017-04-05 16:06:10 +0200 |
|---|---|---|
| committer | Kishon Vijay Abraham I <kishon@ti.com> | 2017-04-10 13:13:41 +0200 |
| commit | 9d685ed77b1b07411c2a0a3e38f567e17f1a247a (patch) | |
| tree | 27b06f59955e3e9b98b094a4e46d59cade434017 /drivers/phy | |
| parent | phy: bcm-ns-usb3: split all writes into reg & val pairs (diff) | |
| download | linux-9d685ed77b1b07411c2a0a3e38f567e17f1a247a.tar.xz linux-9d685ed77b1b07411c2a0a3e38f567e17f1a247a.zip | |
phy: rockchip-usb: Add vbus regulator support.
On rockchip devices vbus is supplied by a separate power supply, often
through a regulator. Add support for describing the the regulator in
device-tree following the same convention as several other usb phy's.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/phy-rockchip-usb.c | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index 734987fa0ad7..3378eeb7a562 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -66,6 +66,7 @@ struct rockchip_usb_phy { struct phy *phy; bool uart_enabled; struct reset_control *reset; + struct regulator *vbus; }; static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, @@ -88,6 +89,9 @@ static void rockchip_usb_phy480m_disable(struct clk_hw *hw) struct rockchip_usb_phy, clk480m_hw); + if (phy->vbus) + regulator_disable(phy->vbus); + /* Power down usb phy analog blocks by set siddq 1 */ rockchip_usb_phy_power(phy, 1); } @@ -143,6 +147,14 @@ static int rockchip_usb_phy_power_on(struct phy *_phy) if (phy->uart_enabled) return -EBUSY; + if (phy->vbus) { + int ret; + + ret = regulator_enable(phy->vbus); + if (ret) + return ret; + } + return clk_prepare_enable(phy->clk480m); } @@ -268,6 +280,13 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, } phy_set_drvdata(rk_phy->phy, rk_phy); + rk_phy->vbus = devm_regulator_get_optional(&rk_phy->phy->dev, "vbus"); + if (IS_ERR(rk_phy->vbus)) { + if (PTR_ERR(rk_phy->vbus) == -EPROBE_DEFER) + return PTR_ERR(rk_phy->vbus); + rk_phy->vbus = NULL; + } + /* * When acting as uart-pipe, just keep clock on otherwise * only power up usb phy when it use, so disable it when init |