summaryrefslogtreecommitdiffstats
path: root/drivers/phy
diff options
context:
space:
mode:
authorYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>2016-11-09 03:30:25 +0100
committerKishon Vijay Abraham I <kishon@ti.com>2016-11-18 13:49:15 +0100
commit9bb86777fb71eeb7cec0c906b6a4d3432c683507 (patch)
treebcbcc512c9e02469441889f0707dbc3ea579b255 /drivers/phy
parentphy: da8xx-usb: Configure CFGCHIP2 to support OTG workaround (diff)
downloadlinux-9bb86777fb71eeb7cec0c906b6a4d3432c683507.tar.xz
linux-9bb86777fb71eeb7cec0c906b6a4d3432c683507.zip
phy: rcar-gen3-usb2: add sysfs for usb role swap
This patch adds sysfs "role" for usb role swap. This parameter can be read and write. If you use this file as the following, you can swap the usb role. For example: 1) Connect a usb cable using 2 Salvator-x boards 2) On A-Device (ID pin is low), you input the following command: # echo peripheral > /sys/devices/platform/soc/ee080200.usb-phy/role 3) On B-Device (ID pin is high), you input the following command: # echo host > /sys/devices/platform/soc/ee080200.usb-phy/role Then, the A-device acts as a peripheral and the B-device acts as a host. Please note that A-Device must input the following command if you want the board to act as a host again. (even if you disconnect the usb cable, since id state may be the same, the A-Device keeps to act as peripheral.) # echo host > /sys/devices/platform/soc/ee080200.usb-phy/role Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/phy-rcar-gen3-usb2.c118
1 files changed, 117 insertions, 1 deletions
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 3d97eadd247d..c63da1b955c1 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -70,6 +70,7 @@
#define USB2_LINECTRL1_DP_RPD BIT(18)
#define USB2_LINECTRL1_DMRPD_EN BIT(17)
#define USB2_LINECTRL1_DM_RPD BIT(16)
+#define USB2_LINECTRL1_OPMODE_NODRV BIT(6)
/* ADPCTRL */
#define USB2_ADPCTRL_OTGSESSVLD BIT(20)
@@ -161,6 +162,43 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
schedule_work(&ch->work);
}
+static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 val;
+
+ val = readl(usb2_base + USB2_LINECTRL1);
+ writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
+
+ rcar_gen3_set_linectrl(ch, 1, 1);
+ rcar_gen3_set_host_mode(ch, 1);
+ rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+ val = readl(usb2_base + USB2_LINECTRL1);
+ writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
+}
+
+static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
+{
+ rcar_gen3_set_linectrl(ch, 0, 1);
+ rcar_gen3_set_host_mode(ch, 0);
+ rcar_gen3_enable_vbus_ctrl(ch, 1);
+}
+
+static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
+{
+ void __iomem *usb2_base = ch->base;
+ u32 val;
+
+ val = readl(usb2_base + USB2_OBINTEN);
+ writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+
+ rcar_gen3_enable_vbus_ctrl(ch, 0);
+ rcar_gen3_init_for_host(ch);
+
+ writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+}
+
static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
{
return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
@@ -174,6 +212,65 @@ static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
rcar_gen3_init_for_peri(ch);
}
+static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
+{
+ return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
+}
+
+static ssize_t role_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+ bool is_b_device, is_host, new_mode_is_host;
+
+ if (!ch->has_otg || !ch->phy->init_count)
+ return -EIO;
+
+ /*
+ * is_b_device: true is B-Device. false is A-Device.
+ * If {new_mode_}is_host: true is Host mode. false is Peripheral mode.
+ */
+ is_b_device = rcar_gen3_check_id(ch);
+ is_host = rcar_gen3_is_host(ch);
+ if (!strncmp(buf, "host", strlen("host")))
+ new_mode_is_host = true;
+ else if (!strncmp(buf, "peripheral", strlen("peripheral")))
+ new_mode_is_host = false;
+ else
+ return -EINVAL;
+
+ /* If current and new mode is the same, this returns the error */
+ if (is_host == new_mode_is_host)
+ return -EINVAL;
+
+ if (new_mode_is_host) { /* And is_host must be false */
+ if (!is_b_device) /* A-Peripheral */
+ rcar_gen3_init_from_a_peri_to_a_host(ch);
+ else /* B-Peripheral */
+ rcar_gen3_init_for_b_host(ch);
+ } else { /* And is_host must be true */
+ if (!is_b_device) /* A-Host */
+ rcar_gen3_init_for_a_peri(ch);
+ else /* B-Host */
+ rcar_gen3_init_for_peri(ch);
+ }
+
+ return count;
+}
+
+static ssize_t role_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+
+ if (!ch->has_otg || !ch->phy->init_count)
+ return -EIO;
+
+ return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
+ "peripheral");
+}
+static DEVICE_ATTR_RW(role);
+
static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
{
void __iomem *usb2_base = ch->base;
@@ -351,21 +448,40 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
channel->vbus = NULL;
}
+ platform_set_drvdata(pdev, channel);
phy_set_drvdata(channel->phy, channel);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- if (IS_ERR(provider))
+ if (IS_ERR(provider)) {
dev_err(dev, "Failed to register PHY provider\n");
+ } else if (channel->has_otg) {
+ int ret;
+
+ ret = device_create_file(dev, &dev_attr_role);
+ if (ret < 0)
+ return ret;
+ }
return PTR_ERR_OR_ZERO(provider);
}
+static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
+{
+ struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
+
+ if (channel->has_otg)
+ device_remove_file(&pdev->dev, &dev_attr_role);
+
+ return 0;
+};
+
static struct platform_driver rcar_gen3_phy_usb2_driver = {
.driver = {
.name = "phy_rcar_gen3_usb2",
.of_match_table = rcar_gen3_phy_usb2_match_table,
},
.probe = rcar_gen3_phy_usb2_probe,
+ .remove = rcar_gen3_phy_usb2_remove,
};
module_platform_driver(rcar_gen3_phy_usb2_driver);