phy: mvebu-cp110-comphy: Add PCIe support

Add PCIe support by filling the COMPHY modes table.

Also add a new macro to generate the right value for the firmware
depending on the width (PCI x1, x2, x4, etc). The width will be passed
by the core as the "submode" argument of the ->set_mode() callback. If
this argument is zero, default to x1 mode.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
[miquel.raynal@bootlin.com: adapt the content to the mainline driver]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

1 files changed, 32 insertions, 5 deletions

diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 98cb7298a9fe..43cd99a69372 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -128,6 +128,7 @@
  * [ 5-11]: COMPHY port index
  * [12-16]: COMPHY mode
  * [17]: Clock source
+ * [18-20]: PCIe width (x1, x2, x4)
  */
 #define COMPHY_FW_POL_OFFSET	0
 #define COMPHY_FW_POL_MASK	GENMASK(1, 0)
@@ -142,24 +143,31 @@
 #define COMPHY_FW_PORT_MASK	GENMASK(11, 8)
 #define COMPHY_FW_MODE_OFFSET	12
 #define COMPHY_FW_MODE_MASK	GENMASK(16, 12)
+#define COMPHY_FW_WIDTH_OFFSET	18
+#define COMPHY_FW_WIDTH_MASK	GENMASK(20, 18)
 
-#define COMPHY_FW_PARAM_FULL(mode, port, speed, pol)			\
+#define COMPHY_FW_PARAM_FULL(mode, port, speed, pol, width)		\
 	((((pol) << COMPHY_FW_POL_OFFSET) & COMPHY_FW_POL_MASK) |	\
 	 (((mode) << COMPHY_FW_MODE_OFFSET) & COMPHY_FW_MODE_MASK) |	\
 	 (((port) << COMPHY_FW_PORT_OFFSET) & COMPHY_FW_PORT_MASK) |	\
-	 (((speed) << COMPHY_FW_SPEED_OFFSET) & COMPHY_FW_SPEED_MASK))
+	 (((speed) << COMPHY_FW_SPEED_OFFSET) & COMPHY_FW_SPEED_MASK) |	\
+	 (((width) << COMPHY_FW_WIDTH_OFFSET) & COMPHY_FW_WIDTH_MASK))
 
 #define COMPHY_FW_PARAM(mode, port)					\
-	COMPHY_FW_PARAM_FULL(mode, port, 0, 0)
+	COMPHY_FW_PARAM_FULL(mode, port, COMPHY_FW_SPEED_MAX, 0, 0)
 
 #define COMPHY_FW_PARAM_ETH(mode, port, speed)				\
-	COMPHY_FW_PARAM_FULL(mode, port, speed, 0)
+	COMPHY_FW_PARAM_FULL(mode, port, speed, 0, 0)
+
+#define COMPHY_FW_PARAM_PCIE(mode, port, width)				\
+	COMPHY_FW_PARAM_FULL(mode, port, COMPHY_FW_SPEED_5000, 0, width)
 
 #define COMPHY_FW_MODE_SATA		0x1
 #define COMPHY_FW_MODE_SGMII		0x2 /* SGMII 1G */
 #define COMPHY_FW_MODE_HS_SGMII		0x3 /* SGMII 2.5G */
 #define COMPHY_FW_MODE_USB3H		0x4
 #define COMPHY_FW_MODE_USB3D		0x5
+#define COMPHY_FW_MODE_PCIE		0x6
 #define COMPHY_FW_MODE_RXAUI		0x7
 #define COMPHY_FW_MODE_XFI		0x8 /* SFI: 0x9 (is treated like XFI) */
 
@@ -194,6 +202,7 @@ struct mvebu_comphy_conf {
 
 static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	/* lane 0 */
+	GEN_CONF(0, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
 	ETH_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
 	GEN_CONF(0, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
@@ -201,6 +210,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	GEN_CONF(1, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
 	GEN_CONF(1, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
 	GEN_CONF(1, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
+	GEN_CONF(1, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
 	ETH_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
 	/* lane 2 */
@@ -210,7 +220,9 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1, COMPHY_FW_MODE_XFI),
 	GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
 	GEN_CONF(2, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
+	GEN_CONF(2, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
 	/* lane 3 */
+	GEN_CONF(3, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
 	ETH_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
 	ETH_CONF(3, 1, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI),
@@ -223,6 +235,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	ETH_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI),
 	GEN_CONF(4, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
 	GEN_CONF(4, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
+	GEN_CONF(4, 1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_HS_SGMII),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GKR, -1, COMPHY_FW_MODE_XFI),
@@ -231,6 +244,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	GEN_CONF(5, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
 	ETH_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
+	GEN_CONF(5, 2, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
 };
 
 struct mvebu_comphy_priv {
@@ -265,6 +279,8 @@ static int mvebu_comphy_get_mode(bool fw_mode, int lane, int port,
 				 enum phy_mode mode, int submode)
 {
 	int i, n = ARRAY_SIZE(mvebu_comphy_cp110_modes);
+	/* Ignore PCIe submode: it represents the width */
+	bool ignore_submode = (mode == PHY_MODE_PCIE);
 	const struct mvebu_comphy_conf *conf;
 
 	/* Unused PHY mux value is 0x0 */
@@ -276,7 +292,7 @@ static int mvebu_comphy_get_mode(bool fw_mode, int lane, int port,
 		if (conf->lane == lane &&
 		    conf->port == port &&
 		    conf->mode == mode &&
-		    conf->submode == submode)
+		    (conf->submode == submode || ignore_submode))
 			break;
 	}
 
@@ -678,6 +694,12 @@ static int mvebu_comphy_power_on(struct phy *phy)
 		dev_dbg(priv->dev, "set lane %d to SATA mode\n", lane->id);
 		fw_param = COMPHY_FW_PARAM(fw_mode, lane->port);
 		break;
+	case PHY_MODE_PCIE:
+		dev_dbg(priv->dev, "set lane %d to PCIe mode (x%d)\n", lane->id,
+			lane->submode);
+		fw_param = COMPHY_FW_PARAM_PCIE(fw_mode, lane->port,
+						lane->submode);
+		break;
 	default:
 		dev_err(priv->dev, "unsupported PHY mode (%d)\n", lane->mode);
 		return -ENOTSUPP;
@@ -714,6 +736,11 @@ static int mvebu_comphy_set_mode(struct phy *phy,
 
 	lane->mode = mode;
 	lane->submode = submode;
+
+	/* PCIe submode represents the width */
+	if (mode == PHY_MODE_PCIE && !lane->submode)
+		lane->submode = 1;
+
 	return 0;
 }