diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2012-05-02 22:56:47 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2012-05-11 11:14:16 +0200 |
commit | dbfe8ca259e1f899ca02ea33d903fa21bbea67c5 (patch) | |
tree | 84323bb062518a3ffe538162e8ca9e21a7743425 /drivers/pinctrl/pinctrl-nomadik-db8500.c | |
parent | pinctrl/nomadik: reuse GPIO debug function for pins (diff) | |
download | linux-dbfe8ca259e1f899ca02ea33d903fa21bbea67c5.tar.xz linux-dbfe8ca259e1f899ca02ea33d903fa21bbea67c5.zip |
pinctrl/nomadik: implement pin multiplexing
Implements basic pinmux for the Nomadik pin controller.
The plan is to split the existing singular pin config interface
nmk_config_pin(), nmk_config_pins(), that will configure muxing
and other settings at the same time, into two interfaces
by splitting the code in pinmux and pinctrl and eventually
deleting the old interface and its helper functions when all
users are gone.
nmk_gpio_set_mode() and nmk_gpio_get_mode() are two older
interfaces for just configuring muxing/altfunctions that
will also be replaced in the end.
We take some extra care to handle the glitch-avoidance here,
but it is simpler now since there is only one altsetting per
pingroup so we know immediately if we need to avoid altfunc
C glitches for a certain group.
As part of the makeover implement the .request() and .free()
calls on the GPIO chips and have them call back into the
pinctrl layer to reserve GPIOs.
ChangeLog v1->v2:
- Rebased on pinctrl-mergebase-20120418 so we get the latest
driver infrastructure where function count is done by a fixed
value and we can drop a few range checks since this is now
handled by the core.
- Include a GPIO muxing hunk erroneously part of the pin config
patch.
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/pinctrl-nomadik-db8500.c')
-rw-r--r-- | drivers/pinctrl/pinctrl-nomadik-db8500.c | 130 |
1 files changed, 130 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c index b6871c9ba53b..8b2022276f71 100644 --- a/drivers/pinctrl/pinctrl-nomadik-db8500.c +++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c @@ -711,11 +711,141 @@ static const struct nmk_pingroup nmk_db8500_groups[] = { DB8500_PIN_GROUP(spi2_oc1_1, NMK_GPIO_ALT_C), }; +/* We use this macro to define the groups applicable to a function */ +#define DB8500_FUNC_GROUPS(a, b...) \ +static const char * const a##_groups[] = { b }; + +DB8500_FUNC_GROUPS(u0, "u0_a_1", "u0_c_1"); +DB8500_FUNC_GROUPS(u1, "u1rxtx_a_1", "u1ctsrts_a_1"); +/* + * UART2 can be muxed out with just RX/TX in four places, CTS+RTS is however + * only available on two pins in alternative function C + */ +DB8500_FUNC_GROUPS(u2, "u2rxtx_b_1", "u2rxtx_c_1", "u2ctsrts_c_1", + "u2rxtx_c_2", "u2rxtx_c_3"); +DB8500_FUNC_GROUPS(ipi2c, "ipi2c_a_1", "ipi2c_a_2"); +/* + * MSP0 can only be on a certain set of pins, but the TX/RX pins can be + * switched around by selecting the altfunction A or B. The SCK pin is + * only available on the altfunction B. + */ +DB8500_FUNC_GROUPS(msp0, "msp0txrx_a_1", "msp0tfstck_a_1", "msp0rfstck_a_1", + "msp0txrx_b_1", "msp0sck_b_1"); +DB8500_FUNC_GROUPS(mc0, "mc0_a_1"); +/* MSP0 can swap RX/TX like MSP0 but has no SCK pin available */ +DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1"); +DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1"); +DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1", + "lcd_d8_d11_a_1", "lcd_d12_d23_a_1", "lcd_b_1"); +DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_c_1", "kp_oc1_1"); +DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1"); +DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1"); +DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1"); +DB8500_FUNC_GROUPS(i2c0, "i2c0_a_1"); +/* The image processor has 8 GPIO pins that can be muxed out */ +DB8500_FUNC_GROUPS(ipgpio, "ipgpio0_a_1", "ipgpio1_a_1", "ipgpio7_b_1", + "ipgpio2_b_1", "ipgpio3_b_1", "ipgpio6_c_1", "ipgpio0_c_1", + "ipgpio1_c_1", "ipgpio3_c_1", "ipgpio2_c_1", "ipgpio4_c_1", + "ipgpio5_c_1", "ipgpio6_c_2", "ipgpio7_c_1", "ipgpio2_c_2", + "ipgpio3_c_2", "ipgpio4_c_2", "ipgpio5_c_2"); +/* MSP2 can not invert the RX/TX pins but has the optional SCK pin */ +DB8500_FUNC_GROUPS(msp2, "msp2sck_a_1", "msp2_a_1"); +DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1"); +DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1dir_a_1"); +DB8500_FUNC_GROUPS(hsi, "hsir1_a_1", "hsit1_a_1"); +DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1"); +DB8500_FUNC_GROUPS(usb, "usb_a_1"); +DB8500_FUNC_GROUPS(trig, "trig_b_1"); +DB8500_FUNC_GROUPS(i2c4, "i2c4_b_1"); +DB8500_FUNC_GROUPS(i2c1, "i2c1_b_1", "i2c1_b_2"); +DB8500_FUNC_GROUPS(i2c2, "i2c2_b_1", "i2c2_b_2"); +/* + * The modem UART can output its RX and TX pins in some different places, + * so select one of each. + */ +DB8500_FUNC_GROUPS(uartmod, "uartmodtx_b_1", "uartmodrx_b_1", "uartmodrx_b_2", + "uartmodrx_c_1", "uartmod_tx_c_1"); +DB8500_FUNC_GROUPS(stmmod, "stmmod_b_1", "stmmod_c_1"); +DB8500_FUNC_GROUPS(spi3, "spi3_b_1"); +/* Select between CS0 on alt B or PS1 on alt C */ +DB8500_FUNC_GROUPS(sm, "sm_b_1", "smcs0_b_1", "smcleale_c_1", "smps1_c_1"); +DB8500_FUNC_GROUPS(lcda, "lcdaclk_b_1", "lcda_b_1"); +DB8500_FUNC_GROUPS(ddrtrig, "ddrtrig_b_1"); +DB8500_FUNC_GROUPS(pwl, "pwl_b_1", "pwl_b_2", "pwl_b_3", "pwl_b_4"); +DB8500_FUNC_GROUPS(spi1, "spi1_b_1"); +DB8500_FUNC_GROUPS(mc3, "mc3_b_1"); +DB8500_FUNC_GROUPS(ipjtag, "ipjtag_c_1"); +DB8500_FUNC_GROUPS(slim0, "slim0_c_1"); +DB8500_FUNC_GROUPS(ms, "ms_c_1"); +DB8500_FUNC_GROUPS(iptrigout, "iptrigout_c_1"); +DB8500_FUNC_GROUPS(stmape, "stmape_c_1", "stmape_c_2"); +DB8500_FUNC_GROUPS(mc5, "mc5_c_1"); +DB8500_FUNC_GROUPS(usbsim, "usbsim_c_1", "usbsim_c_2"); +DB8500_FUNC_GROUPS(i2c3, "i2c3_c_1", "i2c3_c_2"); +DB8500_FUNC_GROUPS(spi0, "spi0_c_1"); +DB8500_FUNC_GROUPS(spi2, "spi2_oc1_1"); + +#define FUNCTION(fname) \ + { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +static const struct nmk_function nmk_db8500_functions[] = { + FUNCTION(u0), + FUNCTION(u1), + FUNCTION(u2), + FUNCTION(ipi2c), + FUNCTION(msp0), + FUNCTION(mc0), + FUNCTION(msp1), + FUNCTION(lcdb), + FUNCTION(lcd), + FUNCTION(kp), + FUNCTION(mc2), + FUNCTION(ssp1), + FUNCTION(ssp0), + FUNCTION(i2c0), + FUNCTION(ipgpio), + FUNCTION(msp2), + FUNCTION(mc4), + FUNCTION(mc1), + FUNCTION(hsi), + FUNCTION(clkout), + FUNCTION(usb), + FUNCTION(trig), + FUNCTION(i2c4), + FUNCTION(i2c1), + FUNCTION(i2c2), + FUNCTION(uartmod), + FUNCTION(stmmod), + FUNCTION(spi3), + FUNCTION(sm), + FUNCTION(lcda), + FUNCTION(ddrtrig), + FUNCTION(pwl), + FUNCTION(spi1), + FUNCTION(mc3), + FUNCTION(ipjtag), + FUNCTION(slim0), + FUNCTION(ms), + FUNCTION(iptrigout), + FUNCTION(stmape), + FUNCTION(mc5), + FUNCTION(usbsim), + FUNCTION(i2c3), + FUNCTION(spi0), + FUNCTION(spi2), +}; + static const struct nmk_pinctrl_soc_data nmk_db8500_soc = { .gpio_ranges = nmk_db8500_ranges, .gpio_num_ranges = ARRAY_SIZE(nmk_db8500_ranges), .pins = nmk_db8500_pins, .npins = ARRAY_SIZE(nmk_db8500_pins), + .functions = nmk_db8500_functions, + .nfunctions = ARRAY_SIZE(nmk_db8500_functions), .groups = nmk_db8500_groups, .ngroups = ARRAY_SIZE(nmk_db8500_groups), }; |