diff options
| author | Pritesh Raithatha <praithatha@nvidia.com> | 2013-01-08 08:32:36 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2013-01-18 16:13:52 +0100 |
| commit | 348d1bf75c09f854630e9bd161dc2a88aebe2149 (patch) | |
| tree | b7f3fd0f286d8191584c8d2f0200a29121e1acf2 /drivers/pinctrl/pinctrl-tegra.c | |
| parent | pinctrl: do not defer device tree hogs (diff) | |
| download | linux-348d1bf75c09f854630e9bd161dc2a88aebe2149.tar.xz linux-348d1bf75c09f854630e9bd161dc2a88aebe2149.zip | |
pinctrl: tegra: add support for rcv-sel and drive type
NVIDIA's Tegra114 added two more configuration parameter in pinmux i.e.
rcv-sel and drive type.
rcv-sel: Select between High and Normal VIL/VIH receivers.
RCVR_SEL=1: High VIL/VIH
RCVR_SEL=0: Normal VIL/VIH
drv_type: Ouptput drive type:
33-50 ohm driver: 0x1
66-100ohm driver: 0x0
Add support of these parameters to be configure from DTS file.
Tegra20 and Tegra30 does not support this configuration and hence initialize their
pinmux structure with reg = -1.
Originally written by Pritesh Raithatha.
Changes by ldewangan:
- remove drvtype_width as it is always 2.
- Better describe the change.
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/pinctrl-tegra.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-tegra.c | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c index ae1e4bb3259d..f195d77a3572 100644 --- a/drivers/pinctrl/pinctrl-tegra.c +++ b/drivers/pinctrl/pinctrl-tegra.c @@ -201,6 +201,7 @@ static const struct cfg_param { {"nvidia,open-drain", TEGRA_PINCONF_PARAM_OPEN_DRAIN}, {"nvidia,lock", TEGRA_PINCONF_PARAM_LOCK}, {"nvidia,io-reset", TEGRA_PINCONF_PARAM_IORESET}, + {"nvidia,rcv-sel", TEGRA_PINCONF_PARAM_RCV_SEL}, {"nvidia,high-speed-mode", TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE}, {"nvidia,schmitt", TEGRA_PINCONF_PARAM_SCHMITT}, {"nvidia,low-power-mode", TEGRA_PINCONF_PARAM_LOW_POWER_MODE}, @@ -208,6 +209,7 @@ static const struct cfg_param { {"nvidia,pull-up-strength", TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH}, {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, + {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, }; static int tegra_pinctrl_dt_subnode_to_map(struct device *dev, @@ -450,6 +452,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->ioreset_bit; *width = 1; break; + case TEGRA_PINCONF_PARAM_RCV_SEL: + *bank = g->rcv_sel_bank; + *reg = g->rcv_sel_reg; + *bit = g->rcv_sel_bit; + *width = 1; + break; case TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE: *bank = g->drv_bank; *reg = g->drv_reg; @@ -492,6 +500,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->slwr_bit; *width = g->slwr_width; break; + case TEGRA_PINCONF_PARAM_DRIVE_TYPE: + *bank = g->drvtype_bank; + *reg = g->drvtype_reg; + *bit = g->drvtype_bit; + *width = 2; + break; default: dev_err(pmx->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; |