diff options
author | Chris Chiu <chiu@endlessm.com> | 2019-08-16 11:38:38 +0200 |
---|---|---|
committer | Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 2019-08-19 11:41:44 +0200 |
commit | 6cb0880f08229360c6c57416de075aa96930be78 (patch) | |
tree | d4ca80a70091211c84b02beb8778b7f515d0f950 /drivers/pinctrl | |
parent | pinctrl: intel: Allow to request locked pads (diff) | |
download | linux-6cb0880f08229360c6c57416de075aa96930be78.tar.xz linux-6cb0880f08229360c6c57416de075aa96930be78.zip |
pinctrl: intel: remap the pin number to gpio offset for irq enabled pin
On Asus X571GT, GPIO 297 is configured as an interrupt and serves
for the touchpad. The touchpad will report input events much less
than expected after S3 suspend/resume, which results in extremely
slow cursor movement. However, the number of interrupts observed
from /proc/interrupts increases much more than expected even no
touching touchpad.
This is due to the value of PADCFG0 of PIN 225 for the interrupt
has been changed from 0x80800102 to 0x80100102. The GPIROUTIOXAPIC
is toggled on which results in the spurious interrupts. The PADCFG0
of PIN 225 is expected to be saved during suspend, but the 297 is
saved instead because the gpiochip_line_is_irq() expect the GPIO
offset but what's really passed to it is PIN number. In this case,
the /sys/kernel/debug/pinctrl/INT3450:00/gpio-ranges shows
288: INT3450:00 GPIOS [436 - 459] PINS [216 - 239]
So gpiochip_line_is_irq() returns true for GPIO offset 297, the
suspend routine spuriously saves the content for PIN 297 which
we expect to save for PIN 225.
This commit maps the PIN number to GPIO offset first in the
intel_pinctrl_should_save() to make sure the values for the
specific PINs can be correctly saved and then restored.
Fixes: c538b9436751 ("pinctrl: intel: Only restore pins that are used by the driver")
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r-- | drivers/pinctrl/intel/pinctrl-intel.c | 25 |
1 files changed, 24 insertions, 1 deletions
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 104dfaa78cb8..d66fe2b4221b 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -831,6 +831,29 @@ static int intel_gpio_to_pin(struct intel_pinctrl *pctrl, unsigned int offset, return -EINVAL; } +/** + * intel_pin_to_gpio() - Translate from pin number to GPIO offset + * @pctrl: Pinctrl structure + * @pin: pin number + * + * Translate the pin number of pinctrl to GPIO offset + */ +static int intel_pin_to_gpio(struct intel_pinctrl *pctrl, int pin) +{ + const struct intel_community *community; + const struct intel_padgroup *padgrp; + + community = intel_get_community(pctrl, pin); + if (!community) + return -EINVAL; + + padgrp = intel_community_get_padgroup(community, pin); + if (!padgrp) + return -EINVAL; + + return pin - padgrp->base + padgrp->gpio_base; +} + static int intel_gpio_get(struct gpio_chip *chip, unsigned int offset) { struct intel_pinctrl *pctrl = gpiochip_get_data(chip); @@ -1468,7 +1491,7 @@ static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned int * them alone. */ if (pd->mux_owner || pd->gpio_owner || - gpiochip_line_is_irq(&pctrl->chip, pin)) + gpiochip_line_is_irq(&pctrl->chip, intel_pin_to_gpio(pctrl, pin))) return true; return false; |