pinctrl: qcom: sdm845: Provide ACPI support

This patch provides basic support for booting with ACPI instead
of the currently supported Device Tree.  When doing so there are a
couple of differences which we need to taken into consideration.

Firstly, the SDM850 ACPI tables omit information pertaining to the
4 reserved GPIOs on the platform.  If Linux attempts to touch/
initialise any of these lines, the firmware will restart the
platform.

Secondly, when booting with ACPI, it is expected that the firmware
will set-up things like; Regulators, Clocks, Pin Functions, etc in
their ideal configuration.  Thus, the possible Pin Functions
available to this platform are not advertised when providing the
higher GPIOD/Pinctrl APIs with pin information.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2 files changed, 36 insertions, 2 deletions

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 2e66ab72c10b..aafbe932424f 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -168,7 +168,7 @@ config PINCTRL_SDM660
 
 config PINCTRL_SDM845
        tristate "Qualcomm Technologies Inc SDM845 pin controller driver"
-       depends on GPIOLIB && OF
+       depends on GPIOLIB && (OF || ACPI)
        select PINCTRL_MSM
        help
          This is the pinctrl, pinmux, pinconf and gpiolib driver for the
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c
index c97f20fca5fd..98a438dba711 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm845.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -1277,6 +1278,10 @@ static const struct msm_pingroup sdm845_groups[] = {
 	UFS_RESET(ufs_reset, 0x99f000),
 };
 
+static const int sdm845_acpi_reserved_gpios[] = {
+	0, 1, 2, 3, 81, 82, 83, 84, -1
+};
+
 static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
 	.pins = sdm845_pins,
 	.npins = ARRAY_SIZE(sdm845_pins),
@@ -1287,11 +1292,39 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
 	.ngpios = 150,
 };
 
+static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = {
+	.pins = sdm845_pins,
+	.npins = ARRAY_SIZE(sdm845_pins),
+	.groups = sdm845_groups,
+	.ngroups = ARRAY_SIZE(sdm845_groups),
+	.reserved_gpios = sdm845_acpi_reserved_gpios,
+	.ngpios = 150,
+};
+
 static int sdm845_pinctrl_probe(struct platform_device *pdev)
 {
-	return msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+	int ret;
+
+	if (pdev->dev.of_node) {
+		ret = msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+	} else if (has_acpi_companion(&pdev->dev)) {
+		ret = msm_pinctrl_probe(pdev, &sdm845_acpi_pinctrl);
+	} else {
+		dev_err(&pdev->dev, "DT and ACPI disabled\n");
+		return -EINVAL;
+	}
+
+	return ret;
 }
 
+#if CONFIG_ACPI
+static const struct acpi_device_id sdm845_pinctrl_acpi_match[] = {
+	{ "QCOM0217"},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, sdm845_pinctrl_acpi_match);
+#endif
+
 static const struct of_device_id sdm845_pinctrl_of_match[] = {
 	{ .compatible = "qcom,sdm845-pinctrl", },
 	{ },
@@ -1302,6 +1335,7 @@ static struct platform_driver sdm845_pinctrl_driver = {
 		.name = "sdm845-pinctrl",
 		.pm = &msm_pinctrl_dev_pm_ops,
 		.of_match_table = sdm845_pinctrl_of_match,
+		.acpi_match_table = ACPI_PTR(sdm845_pinctrl_acpi_match),
 	},
 	.probe = sdm845_pinctrl_probe,
 	.remove = msm_pinctrl_remove,