summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
diff options
context:
space:
mode:
authorHenry Paulissen <henry@nitronetworks.nl>2016-02-29 00:13:27 +0100
committerLinus Walleij <linus.walleij@linaro.org>2016-03-08 10:02:27 +0100
commit7866f5a0bab747bbb10a228bcb15e97839a6c8ba (patch)
treede00a43d48c8df63355c308bbbb12a68b5449780 /drivers/pinctrl
parentpinctrl: sunxi: Remove non existing irq's (diff)
downloadlinux-7866f5a0bab747bbb10a228bcb15e97839a6c8ba.tar.xz
linux-7866f5a0bab747bbb10a228bcb15e97839a6c8ba.zip
pinctrl: sunxi: Change mux setting on PI irq pins
While I was testing irq's on the cubietruck I found a couple of not working irq pins. Further diving into the problem it opened up a mess called "manual". This so called manual (A20 user manual v1.3 dated 2014-10-10) says: Pin overview: Page 237: EINT26 is on mux 5. Page 288: EINT26 is on mux 6. The manual is so contradicting that further tests had to be made to see which of the 2 statements where correct. This patch is based on actual outcome of these tests and not what the manual says. Test procedure used: Connect a 1 pulse per second (GPS) line to the pin. echo pin### > /sys/class/gpio/export echo in > /sys/class/gpio/gpio###/direction echo rising > /sys/class/gpio/gpio###/edge Check /proc/interrupts if a irq was attached and if irq's where received. Hardware used: Henry Paulissen: Cubietruck Andere Przywara: BananaPi M1 Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Henry Paulissen <henry@nitronetworks.nl> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r--drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c20
1 files changed, 10 insertions, 10 deletions
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
index 25748b410f28..435ad30f45db 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
@@ -956,65 +956,65 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CS0 */
SUNXI_FUNCTION(0x3, "uart5"), /* TX */
- SUNXI_FUNCTION_IRQ(0x5, 22)), /* EINT22 */
+ SUNXI_FUNCTION_IRQ(0x6, 22)), /* EINT22 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CLK */
SUNXI_FUNCTION(0x3, "uart5"), /* RX */
- SUNXI_FUNCTION_IRQ(0x5, 23)), /* EINT23 */
+ SUNXI_FUNCTION_IRQ(0x6, 23)), /* EINT23 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 12),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* MOSI */
SUNXI_FUNCTION(0x3, "uart6"), /* TX */
SUNXI_FUNCTION(0x4, "clk_out_a"), /* CLK_OUT_A */
- SUNXI_FUNCTION_IRQ(0x5, 24)), /* EINT24 */
+ SUNXI_FUNCTION_IRQ(0x6, 24)), /* EINT24 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* MISO */
SUNXI_FUNCTION(0x3, "uart6"), /* RX */
SUNXI_FUNCTION(0x4, "clk_out_b"), /* CLK_OUT_B */
- SUNXI_FUNCTION_IRQ(0x5, 25)), /* EINT25 */
+ SUNXI_FUNCTION_IRQ(0x6, 25)), /* EINT25 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi0"), /* CS1 */
SUNXI_FUNCTION(0x3, "ps2"), /* SCK1 */
SUNXI_FUNCTION(0x4, "timer4"), /* TCLKIN0 */
- SUNXI_FUNCTION_IRQ(0x5, 26)), /* EINT26 */
+ SUNXI_FUNCTION_IRQ(0x6, 26)), /* EINT26 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 15),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CS1 */
SUNXI_FUNCTION(0x3, "ps2"), /* SDA1 */
SUNXI_FUNCTION(0x4, "timer5"), /* TCLKIN1 */
- SUNXI_FUNCTION_IRQ(0x5, 27)), /* EINT27 */
+ SUNXI_FUNCTION_IRQ(0x6, 27)), /* EINT27 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 16),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CS0 */
SUNXI_FUNCTION(0x3, "uart2"), /* RTS */
- SUNXI_FUNCTION_IRQ(0x5, 28)), /* EINT28 */
+ SUNXI_FUNCTION_IRQ(0x6, 28)), /* EINT28 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 17),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* CLK */
SUNXI_FUNCTION(0x3, "uart2"), /* CTS */
- SUNXI_FUNCTION_IRQ(0x5, 29)), /* EINT29 */
+ SUNXI_FUNCTION_IRQ(0x6, 29)), /* EINT29 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 18),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* MOSI */
SUNXI_FUNCTION(0x3, "uart2"), /* TX */
- SUNXI_FUNCTION_IRQ(0x5, 30)), /* EINT30 */
+ SUNXI_FUNCTION_IRQ(0x6, 30)), /* EINT30 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 19),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "spi1"), /* MISO */
SUNXI_FUNCTION(0x3, "uart2"), /* RX */
- SUNXI_FUNCTION_IRQ(0x5, 31)), /* EINT31 */
+ SUNXI_FUNCTION_IRQ(0x6, 31)), /* EINT31 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 20),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),