summaryrefslogtreecommitdiffstats
path: root/drivers/platform/chrome
diff options
context:
space:
mode:
authorNick Crews <ncrews@chromium.org>2019-02-09 01:37:17 +0100
committerEnric Balletbo i Serra <enric.balletbo@collabora.com>2019-02-21 21:35:59 +0100
commit7b3d4f44abf0e7a1ba762c8a9c99a8b39ee0c8b1 (patch)
tree59ed497376f624fad1530a06870f43d86cabce33 /drivers/platform/chrome
parentplatform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec (diff)
downloadlinux-7b3d4f44abf0e7a1ba762c8a9c99a8b39ee0c8b1.tar.xz
linux-7b3d4f44abf0e7a1ba762c8a9c99a8b39ee0c8b1.zip
platform/chrome: Add new driver for Wilco EC
This EC is an incompatible variant of the typical Chrome OS embedded controller. It uses the same low-level communication and a similar protocol with some significant differences. The EC firmware does not support the same mailbox commands so it is not registered as a cros_ec device type. This commit exports the wilco_ec_mailbox() function so that other modules can use it to communicate with the EC. Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Nick Crews <ncrews@chromium.org> [Fix the sparse warning: symbol 'wilco_ec_transfer' was not declared] Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [Fix Kconfig dependencies for wilco_ec] Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Diffstat (limited to 'drivers/platform/chrome')
-rw-r--r--drivers/platform/chrome/Kconfig2
-rw-r--r--drivers/platform/chrome/Makefile2
-rw-r--r--drivers/platform/chrome/wilco_ec/Kconfig10
-rw-r--r--drivers/platform/chrome/wilco_ec/Makefile4
-rw-r--r--drivers/platform/chrome/wilco_ec/core.c104
-rw-r--r--drivers/platform/chrome/wilco_ec/mailbox.c237
6 files changed, 359 insertions, 0 deletions
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 5e2fde5ff63d..9186d81a51cc 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -152,4 +152,6 @@ config CROS_EC_SYSFS
To compile this driver as a module, choose M here: the
module will be called cros_ec_sysfs.
+source "drivers/platform/chrome/wilco_ec/Kconfig"
+
endif # CHROMEOS_PLATFORMS
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index fdbee501931b..1e2f0029b597 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -14,3 +14,5 @@ obj-$(CONFIG_CROS_EC_LIGHTBAR) += cros_ec_lightbar.o
obj-$(CONFIG_CROS_EC_VBC) += cros_ec_vbc.o
obj-$(CONFIG_CROS_EC_DEBUGFS) += cros_ec_debugfs.o
obj-$(CONFIG_CROS_EC_SYSFS) += cros_ec_sysfs.o
+
+obj-$(CONFIG_WILCO_EC) += wilco_ec/
diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
new file mode 100644
index 000000000000..c6bc4e8f3062
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/Kconfig
@@ -0,0 +1,10 @@
+config WILCO_EC
+ tristate "ChromeOS Wilco Embedded Controller"
+ depends on ACPI && X86 && CROS_EC_LPC_MEC
+ help
+ If you say Y here, you get support for talking to the ChromeOS
+ Wilco EC over an eSPI bus. This uses a simple byte-level protocol
+ with a checksum.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wilco_ec.
diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile
new file mode 100644
index 000000000000..03b32301dc61
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+wilco_ec-objs := core.o mailbox.o
+obj-$(CONFIG_WILCO_EC) += wilco_ec.o
diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c
new file mode 100644
index 000000000000..20ecc580d108
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/core.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Core driver for Wilco Embedded Controller
+ *
+ * Copyright 2018 Google LLC
+ *
+ * This is the entry point for the drivers that control the Wilco EC.
+ * This driver is responsible for several tasks:
+ * - Initialize the register interface that is used by wilco_ec_mailbox()
+ * - Create a platform device which is picked up by the debugfs driver
+ * - Create a platform device which is picked up by the RTC driver
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/platform_device.h>
+
+#include "../cros_ec_lpc_mec.h"
+
+#define DRV_NAME "wilco-ec"
+
+static struct resource *wilco_get_resource(struct platform_device *pdev,
+ int index)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, index);
+ if (!res) {
+ dev_dbg(dev, "Couldn't find IO resource %d\n", index);
+ return res;
+ }
+
+ return devm_request_region(dev, res->start, resource_size(res),
+ dev_name(dev));
+}
+
+static int wilco_ec_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct wilco_ec_device *ec;
+
+ ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL);
+ if (!ec)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ec);
+ ec->dev = dev;
+ mutex_init(&ec->mailbox_lock);
+
+ /* Largest data buffer size requirement is extended data response */
+ ec->data_size = sizeof(struct wilco_ec_response) +
+ EC_MAILBOX_DATA_SIZE_EXTENDED;
+ ec->data_buffer = devm_kzalloc(dev, ec->data_size, GFP_KERNEL);
+ if (!ec->data_buffer)
+ return -ENOMEM;
+
+ /* Prepare access to IO regions provided by ACPI */
+ ec->io_data = wilco_get_resource(pdev, 0); /* Host Data */
+ ec->io_command = wilco_get_resource(pdev, 1); /* Host Command */
+ ec->io_packet = wilco_get_resource(pdev, 2); /* MEC EMI */
+ if (!ec->io_data || !ec->io_command || !ec->io_packet)
+ return -ENODEV;
+
+ /* Initialize cros_ec register interface for communication */
+ cros_ec_lpc_mec_init(ec->io_packet->start,
+ ec->io_packet->start + EC_MAILBOX_DATA_SIZE);
+
+ return 0;
+}
+
+static int wilco_ec_remove(struct platform_device *pdev)
+{
+ /* Teardown cros_ec interface */
+ cros_ec_lpc_mec_destroy();
+
+ return 0;
+}
+
+static const struct acpi_device_id wilco_ec_acpi_device_ids[] = {
+ { "GOOG000C", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, wilco_ec_acpi_device_ids);
+
+static struct platform_driver wilco_ec_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .acpi_match_table = wilco_ec_acpi_device_ids,
+ },
+ .probe = wilco_ec_probe,
+ .remove = wilco_ec_remove,
+};
+
+module_platform_driver(wilco_ec_driver);
+
+MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>");
+MODULE_AUTHOR("Duncan Laurie <dlaurie@chromium.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ChromeOS Wilco Embedded Controller driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/platform/chrome/wilco_ec/mailbox.c b/drivers/platform/chrome/wilco_ec/mailbox.c
new file mode 100644
index 000000000000..f6ff29a11f1a
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/mailbox.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mailbox interface for Wilco Embedded Controller
+ *
+ * Copyright 2018 Google LLC
+ *
+ * The Wilco EC is similar to a typical ChromeOS embedded controller.
+ * It uses the same MEC based low-level communication and a similar
+ * protocol, but with some important differences. The EC firmware does
+ * not support the same mailbox commands so it is not registered as a
+ * cros_ec device type.
+ *
+ * Most messages follow a standard format, but there are some exceptions
+ * and an interface is provided to do direct/raw transactions that do not
+ * make assumptions about byte placement.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/platform_device.h>
+
+#include "../cros_ec_lpc_mec.h"
+
+/* Version of mailbox interface */
+#define EC_MAILBOX_VERSION 0
+
+/* Command to start mailbox transaction */
+#define EC_MAILBOX_START_COMMAND 0xda
+
+/* Version of EC protocol */
+#define EC_MAILBOX_PROTO_VERSION 3
+
+/* Number of header bytes to be counted as data bytes */
+#define EC_MAILBOX_DATA_EXTRA 2
+
+/* Maximum timeout */
+#define EC_MAILBOX_TIMEOUT HZ
+
+/* EC response flags */
+#define EC_CMDR_DATA BIT(0) /* Data ready for host to read */
+#define EC_CMDR_PENDING BIT(1) /* Write pending to EC */
+#define EC_CMDR_BUSY BIT(2) /* EC is busy processing a command */
+#define EC_CMDR_CMD BIT(3) /* Last host write was a command */
+
+/**
+ * wilco_ec_response_timed_out() - Wait for EC response.
+ * @ec: EC device.
+ *
+ * Return: true if EC timed out, false if EC did not time out.
+ */
+static bool wilco_ec_response_timed_out(struct wilco_ec_device *ec)
+{
+ unsigned long timeout = jiffies + EC_MAILBOX_TIMEOUT;
+
+ do {
+ if (!(inb(ec->io_command->start) &
+ (EC_CMDR_PENDING | EC_CMDR_BUSY)))
+ return false;
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ return true;
+}
+
+/**
+ * wilco_ec_checksum() - Compute 8-bit checksum over data range.
+ * @data: Data to checksum.
+ * @size: Number of bytes to checksum.
+ *
+ * Return: 8-bit checksum of provided data.
+ */
+static u8 wilco_ec_checksum(const void *data, size_t size)
+{
+ u8 *data_bytes = (u8 *)data;
+ u8 checksum = 0;
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ checksum += data_bytes[i];
+
+ return checksum;
+}
+
+/**
+ * wilco_ec_prepare() - Prepare the request structure for the EC.
+ * @msg: EC message with request information.
+ * @rq: EC request structure to fill.
+ */
+static void wilco_ec_prepare(struct wilco_ec_message *msg,
+ struct wilco_ec_request *rq)
+{
+ memset(rq, 0, sizeof(*rq));
+
+ /* Handle messages without trimming bytes from the request */
+ if (msg->request_size && msg->flags & WILCO_EC_FLAG_RAW_REQUEST) {
+ rq->reserved_raw = *(u8 *)msg->request_data;
+ msg->request_size--;
+ memmove(msg->request_data, msg->request_data + 1,
+ msg->request_size);
+ }
+
+ /* Fill in request packet */
+ rq->struct_version = EC_MAILBOX_PROTO_VERSION;
+ rq->mailbox_id = msg->type;
+ rq->mailbox_version = EC_MAILBOX_VERSION;
+ rq->data_size = msg->request_size + EC_MAILBOX_DATA_EXTRA;
+ rq->command = msg->command;
+
+ /* Checksum header and data */
+ rq->checksum = wilco_ec_checksum(rq, sizeof(*rq));
+ rq->checksum += wilco_ec_checksum(msg->request_data, msg->request_size);
+ rq->checksum = -rq->checksum;
+}
+
+/**
+ * wilco_ec_transfer() - Perform actual data transfer.
+ * @ec: EC device.
+ * @msg: EC message data for request and response.
+ * @rq: Filled in request structure
+ *
+ * Context: ec->mailbox_lock should be held while using this function.
+ * Return: number of bytes received or negative error code on failure.
+ */
+static int wilco_ec_transfer(struct wilco_ec_device *ec,
+ struct wilco_ec_message *msg,
+ struct wilco_ec_request *rq)
+{
+ struct wilco_ec_response *rs;
+ u8 checksum;
+ u8 flag;
+ size_t size;
+
+ /* Write request header, then data */
+ cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, 0, sizeof(*rq), (u8 *)rq);
+ cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, sizeof(*rq), msg->request_size,
+ msg->request_data);
+
+ /* Start the command */
+ outb(EC_MAILBOX_START_COMMAND, ec->io_command->start);
+
+ /* For some commands (eg shutdown) the EC will not respond, that's OK */
+ if (msg->flags & WILCO_EC_FLAG_NO_RESPONSE) {
+ dev_dbg(ec->dev, "EC does not respond to this command\n");
+ return 0;
+ }
+
+ /* Wait for it to complete */
+ if (wilco_ec_response_timed_out(ec)) {
+ dev_dbg(ec->dev, "response timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ /* Check result */
+ flag = inb(ec->io_data->start);
+ if (flag) {
+ dev_dbg(ec->dev, "bad response: 0x%02x\n", flag);
+ return -EIO;
+ }
+
+ if (msg->flags & WILCO_EC_FLAG_EXTENDED_DATA)
+ size = EC_MAILBOX_DATA_SIZE_EXTENDED;
+ else
+ size = EC_MAILBOX_DATA_SIZE;
+
+ /* Read back response */
+ rs = ec->data_buffer;
+ checksum = cros_ec_lpc_io_bytes_mec(MEC_IO_READ, 0,
+ sizeof(*rs) + size, (u8 *)rs);
+ if (checksum) {
+ dev_dbg(ec->dev, "bad packet checksum 0x%02x\n", rs->checksum);
+ return -EBADMSG;
+ }
+
+ /* Check that the EC reported success */
+ msg->result = rs->result;
+ if (msg->result) {
+ dev_dbg(ec->dev, "bad response: 0x%02x\n", msg->result);
+ return -EBADMSG;
+ }
+
+ /* Check the returned data size, skipping the header */
+ if (rs->data_size != size) {
+ dev_dbg(ec->dev, "unexpected packet size (%u != %zu)",
+ rs->data_size, size);
+ return -EMSGSIZE;
+ }
+
+ /* Skip 1 response data byte unless specified */
+ size = (msg->flags & WILCO_EC_FLAG_RAW_RESPONSE) ? 0 : 1;
+ if ((ssize_t) rs->data_size - size < msg->response_size) {
+ dev_dbg(ec->dev, "response data too short (%zd < %zu)",
+ (ssize_t) rs->data_size - size, msg->response_size);
+ return -EMSGSIZE;
+ }
+
+ /* Ignore response data bytes as requested */
+ memcpy(msg->response_data, rs->data + size, msg->response_size);
+
+ /* Return actual amount of data received */
+ return msg->response_size;
+}
+
+/**
+ * wilco_ec_mailbox() - Send EC request and receive EC response.
+ * @ec: EC device.
+ * @msg: EC message data for request and response.
+ *
+ * On entry msg->type, msg->flags, msg->command, msg->request_size,
+ * msg->response_size, and msg->request_data should all be filled in.
+ *
+ * On exit msg->result and msg->response_data will be filled.
+ *
+ * Return: number of bytes received or negative error code on failure.
+ */
+int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg)
+{
+ struct wilco_ec_request *rq;
+ int ret;
+
+ dev_dbg(ec->dev, "cmd=%02x type=%04x flags=%02x rslen=%zu rqlen=%zu\n",
+ msg->command, msg->type, msg->flags, msg->response_size,
+ msg->request_size);
+
+ /* Prepare request packet */
+ rq = ec->data_buffer;
+ wilco_ec_prepare(msg, rq);
+
+ mutex_lock(&ec->mailbox_lock);
+ ret = wilco_ec_transfer(ec, msg, rq);
+ mutex_unlock(&ec->mailbox_lock);
+
+ return ret;
+
+}
+EXPORT_SYMBOL_GPL(wilco_ec_mailbox);