Merge tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "The main MIPS changes for 5.5:

   - Atomics-related code sees some rework & cleanup, most notably
     allowing Loongson LL/SC errata workarounds to be more bulletproof &
     their correctness to be checked at build time.

   - Command line setup code is simplified somewhat, resolving various
     corner cases.

   - MIPS kernels can now be built with kcov code coverage support.

   - We can now build with CONFIG_FORTIFY_SOURCE=y.

   - Miscellaneous cleanups.

  And some platform specific changes:

   - We now disable some broken TLB functionality on certain Ingenic
     systems, and JZ4780 systems gain some devicetree nodes to support
     more devices.

   - Loongson support sees a number of cleanups, and we gain initial
     support for Loongson 3A R4 systems.

   - We gain support for MediaTek MT7688-based GARDENA Smart Gateway
     systems.

   - SGI IP27 (Origin 2*) see a number of fixes, cleanups &
     simplifications.

   - SGI IP30 (Octane) systems are now supported"

* tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
  MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module
  MIPS: PCI: Fix fake subdevice ID for IOC3
  MIPS: Ingenic: Disable abandoned HPTLB function.
  MIPS: PCI: remember nasid changed by set interrupt affinity
  MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter
  mips: add support for folded p4d page tables
  mips: drop __pXd_offset() macros that duplicate pXd_index() ones
  mips: fix build when "48 bits virtual memory" is enabled
  MIPS: math-emu: Reuse name array in debugfs_fpuemu()
  MIPS: allow building with kcov coverage
  MIPS: Loongson64: Drop setup_pcimap
  MIPS: Loongson2ef: Convert to early_printk_8250
  MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED
  MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline
  MIPS: Drop pmon.h
  MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage
  MIPS: Loongson: Rename LOONGSON1 to LOONGSON32
  MIPS: Loongson: Fix return value of loongson_hwmon_init
  MIPS: add support for SGI Octane (IP30)
  MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common
  ...

2 files changed, 18 insertions, 3 deletions

diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 62ea1934fb6a..f4d0a86c00d0 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -17,8 +17,8 @@ menuconfig MIPS_PLATFORM_DEVICES
 if MIPS_PLATFORM_DEVICES
 
 config CPU_HWMON
-	tristate "Loongson CPU HWMon Driver"
-	depends on LOONGSON_MACH3X
+	tristate "Loongson-3 CPU HWMon Driver"
+	depends on CONFIG_MACH_LOONGSON64
 	select HWMON
 	default y
 	help
diff --git a/drivers/platform/mips/cpu_hwmon.c b/drivers/platform/mips/cpu_hwmon.c
index a7f184bb47e0..0d27cb7a9e3c 100644
--- a/drivers/platform/mips/cpu_hwmon.c
+++ b/drivers/platform/mips/cpu_hwmon.c
@@ -9,6 +9,9 @@
 #include <loongson.h>
 #include <boot_param.h>
 #include <loongson_hwmon.h>
+#include <loongson_regs.h>
+
+static int csr_temp_enable = 0;
 
 /*
  * Loongson-3 series cpu has two sensors inside,
@@ -20,8 +23,14 @@ int loongson3_cpu_temp(int cpu)
 {
 	u32 reg, prid_rev;
 
+	if (csr_temp_enable) {
+		reg = (csr_readl(LOONGSON_CSR_CPUTEMP) & 0xff);
+		goto out;
+	}
+
 	reg = LOONGSON_CHIPTEMP(cpu);
 	prid_rev = read_c0_prid() & PRID_REV_MASK;
+
 	switch (prid_rev) {
 	case PRID_REV_LOONGSON3A_R1:
 		reg = (reg >> 8) & 0xff;
@@ -34,9 +43,12 @@ int loongson3_cpu_temp(int cpu)
 		break;
 	case PRID_REV_LOONGSON3A_R3_0:
 	case PRID_REV_LOONGSON3A_R3_1:
+	default:
 		reg = (reg & 0xffff)*731/0x4000 - 273;
 		break;
 	}
+
+out:
 	return (int)reg * 1000;
 }
 
@@ -159,9 +171,12 @@ static int __init loongson_hwmon_init(void)
 
 	pr_info("Loongson Hwmon Enter...\n");
 
+	if (cpu_has_csr())
+		csr_temp_enable = csr_readl(LOONGSON_CSR_FEATURES) & LOONGSON_CSRF_TEMP;
+
 	cpu_hwmon_dev = hwmon_device_register(NULL);
 	if (IS_ERR(cpu_hwmon_dev)) {
-		ret = -ENOMEM;
+		ret = PTR_ERR(cpu_hwmon_dev);
 		pr_err("hwmon_device_register fail!\n");
 		goto fail_hwmon_device_register;
 	}