diff options
author | Andreas Dannenberg <dannenberg@ti.com> | 2015-09-29 00:33:56 +0200 |
---|---|---|
committer | Sebastian Reichel <sre@kernel.org> | 2015-09-29 16:53:37 +0200 |
commit | 7c071a0a08f6c6327b86df918d2dda728355d457 (patch) | |
tree | 47a597aa6e441df1a5249afed0712141171cdcf9 /drivers/power/bq24257_charger.c | |
parent | power: bq24257: Allow manual setting of input current limit (diff) | |
download | linux-7c071a0a08f6c6327b86df918d2dda728355d457.tar.xz linux-7c071a0a08f6c6327b86df918d2dda728355d457.zip |
power: bq24257: Add SW-based approach for Power Good determination
A software-based approach for determining the charger's input voltage
"Power Good" state is introduced for devices like the bq24250 which
don't have a dedicated hardware pin for that purpose. This SW-based
approach is also used for other devices (with dedicated PG pin) as a
fall back solution if that pin is not configured to be used through
"pg-gpios".
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Diffstat (limited to 'drivers/power/bq24257_charger.c')
-rw-r--r-- | drivers/power/bq24257_charger.c | 56 |
1 files changed, 45 insertions, 11 deletions
diff --git a/drivers/power/bq24257_charger.c b/drivers/power/bq24257_charger.c index 7bbff806624f..15e0e9395371 100644 --- a/drivers/power/bq24257_charger.c +++ b/drivers/power/bq24257_charger.c @@ -359,7 +359,26 @@ static int bq24257_get_chip_state(struct bq24257_device *bq, state->fault = ret; - state->power_good = !gpiod_get_value_cansleep(bq->pg); + if (bq->pg) + state->power_good = !gpiod_get_value_cansleep(bq->pg); + else + /* + * If we have a chip without a dedicated power-good GPIO or + * some other explicit bit that would provide this information + * assume the power is good if there is no supply related + * fault - and not good otherwise. There is a possibility for + * other errors to mask that power in fact is not good but this + * is probably the best we can do here. + */ + switch (state->fault) { + case FAULT_INPUT_OVP: + case FAULT_INPUT_UVLO: + case FAULT_INPUT_LDO_LOW: + state->power_good = false; + break; + default: + state->power_good = true; + } return 0; } @@ -651,15 +670,21 @@ static int bq24257_power_supply_init(struct bq24257_device *bq) return PTR_ERR_OR_ZERO(bq->charger); } -static int bq24257_pg_gpio_probe(struct bq24257_device *bq) +static void bq24257_pg_gpio_probe(struct bq24257_device *bq) { - bq->pg = devm_gpiod_get_index(bq->dev, BQ24257_PG_GPIO, 0, GPIOD_IN); - if (IS_ERR(bq->pg)) { - dev_err(bq->dev, "could not probe PG pin\n"); - return PTR_ERR(bq->pg); + bq->pg = devm_gpiod_get_optional(bq->dev, BQ24257_PG_GPIO, GPIOD_IN); + + if (PTR_ERR(bq->pg) == -EPROBE_DEFER) { + dev_info(bq->dev, "probe retry requested for PG pin\n"); + return; + } else if (IS_ERR(bq->pg)) { + dev_err(bq->dev, "error probing PG pin\n"); + bq->pg = NULL; + return; } - return 0; + if (bq->pg) + dev_dbg(bq->dev, "probed PG pin = %d\n", desc_to_gpio(bq->pg)); } static int bq24257_fw_probe(struct bq24257_device *bq) @@ -789,10 +814,19 @@ static int bq24257_probe(struct i2c_client *client, INIT_DELAYED_WORK(&bq->iilimit_setup_work, bq24257_iilimit_setup_work); - /* we can only check Power Good status by probing the PG pin */ - ret = bq24257_pg_gpio_probe(bq); - if (ret < 0) - return ret; + /* + * The BQ24250 doesn't have a dedicated Power Good (PG) pin so let's + * not probe for it and instead use a SW-based approach to determine + * the PG state. We also use a SW-based approach for all other devices + * if the PG pin is either not defined or can't be probed. + */ + if (bq->chip != BQ24250) + bq24257_pg_gpio_probe(bq); + + if (PTR_ERR(bq->pg) == -EPROBE_DEFER) + return PTR_ERR(bq->pg); + else if (!bq->pg) + dev_info(bq->dev, "using SW-based power-good detection\n"); /* reset all registers to defaults */ ret = bq24257_field_write(bq, F_RESET, 1); |