summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
authorLadislav Michl <ladis@linux-mips.org>2017-07-16 11:33:06 +0200
committerSebastian Reichel <sre@kernel.org>2017-07-25 12:03:23 +0200
commit63e67c5769c23e0af729ecc2d28e4326f3a67a08 (patch)
treea596034cdaf72b895e497cba37616639545b2839 /drivers/power
parentpower: supply: sbs-battery: Add delay when changing capacity mode bit (diff)
downloadlinux-63e67c5769c23e0af729ecc2d28e4326f3a67a08.tar.xz
linux-63e67c5769c23e0af729ecc2d28e4326f3a67a08.zip
power: supply: ltc2941-battery-gauge: Prepare for LTC2942 and LTC2944
In order to support LTC2942 which has temperature registers at different offsets than LTC2943 use following register naming scheme (prefixes): - LTC294X_ common registers - LTC2942_ chips specific registers - LTC2943_ specific registers LTC2944 is compatible with LTC2943 but uses different constants to compute voltage and current, so replace num_regs misused for device indentification with real device id to discriminate between those two. There are no functional changes. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Dragos Bogdan <dragos.bogdan@analog.com> Tested-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/supply/ltc2941-battery-gauge.c63
1 files changed, 31 insertions, 32 deletions
diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
index 7efb908f4451..b0de448a226b 100644
--- a/drivers/power/supply/ltc2941-battery-gauge.c
+++ b/drivers/power/supply/ltc2941-battery-gauge.c
@@ -34,16 +34,19 @@ enum ltc294x_reg {
LTC294X_REG_CONTROL = 0x01,
LTC294X_REG_ACC_CHARGE_MSB = 0x02,
LTC294X_REG_ACC_CHARGE_LSB = 0x03,
- LTC294X_REG_THRESH_HIGH_MSB = 0x04,
- LTC294X_REG_THRESH_HIGH_LSB = 0x05,
- LTC294X_REG_THRESH_LOW_MSB = 0x06,
- LTC294X_REG_THRESH_LOW_LSB = 0x07,
- LTC294X_REG_VOLTAGE_MSB = 0x08,
- LTC294X_REG_VOLTAGE_LSB = 0x09,
- LTC294X_REG_CURRENT_MSB = 0x0E,
- LTC294X_REG_CURRENT_LSB = 0x0F,
- LTC294X_REG_TEMPERATURE_MSB = 0x14,
- LTC294X_REG_TEMPERATURE_LSB = 0x15,
+ LTC294X_REG_VOLTAGE_MSB = 0x08,
+ LTC294X_REG_VOLTAGE_LSB = 0x09,
+ LTC2942_REG_TEMPERATURE_MSB = 0x0C,
+ LTC2942_REG_TEMPERATURE_LSB = 0x0D,
+ LTC2943_REG_CURRENT_MSB = 0x0E,
+ LTC2943_REG_CURRENT_LSB = 0x0F,
+ LTC2943_REG_TEMPERATURE_MSB = 0x14,
+ LTC2943_REG_TEMPERATURE_LSB = 0x15,
+};
+
+enum ltc294x_id {
+ LTC2941_ID,
+ LTC2943_ID,
};
#define LTC2943_REG_CONTROL_MODE_MASK (BIT(7) | BIT(6))
@@ -54,15 +57,12 @@ enum ltc294x_reg {
((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
#define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED 0
-#define LTC2941_NUM_REGS 0x08
-#define LTC2943_NUM_REGS 0x18
-
struct ltc294x_info {
struct i2c_client *client; /* I2C Client pointer */
struct power_supply *supply; /* Supply pointer */
struct power_supply_desc supply_desc; /* Supply description */
struct delayed_work work; /* Work scheduler */
- unsigned long num_regs; /* Number of registers (chip type) */
+ enum ltc294x_id id; /* Chip type */
int charge; /* Last charge register content */
int r_sense; /* mOhm */
int Qlsb; /* nAh */
@@ -146,7 +146,7 @@ static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
/* Put the 2943 into "monitor" mode, so it measures every 10 sec */
- if (info->num_regs == LTC2943_NUM_REGS)
+ if (info->id == LTC2941_ID)
control |= LTC2943_REG_CONTROL_MODE_SCAN;
if (value != control) {
@@ -263,7 +263,7 @@ static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
s32 value;
ret = ltc294x_read_regs(info->client,
- LTC294X_REG_CURRENT_MSB, &datar[0], 2);
+ LTC2943_REG_CURRENT_MSB, &datar[0], 2);
value = (datar[0] << 8) | datar[1];
value -= 0x7FFF;
/* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
@@ -280,7 +280,7 @@ static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
u32 value;
ret = ltc294x_read_regs(info->client,
- LTC294X_REG_TEMPERATURE_MSB, &datar[0], 2);
+ LTC2943_REG_TEMPERATURE_MSB, &datar[0], 2);
value = (datar[0] << 8) | datar[1];
/* Full-scale is 510 Kelvin, convert to centidegrees */
*val = (((51000 * value) / 0xFFFF) - 27215);
@@ -357,8 +357,8 @@ static enum power_supply_property ltc294x_properties[] = {
POWER_SUPPLY_PROP_CHARGE_COUNTER,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
};
static int ltc294x_i2c_remove(struct i2c_client *client)
@@ -388,7 +388,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
np = of_node_get(client->dev.of_node);
- info->num_regs = (unsigned long)of_device_get_match_data(&client->dev);
+ info->id = (enum ltc294x_id)of_device_get_match_data(&client->dev);
info->supply_desc.name = np->name;
/* r_sense can be negative, when sense+ is connected to the battery
@@ -409,7 +409,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
}
- if (info->num_regs == LTC2943_NUM_REGS) {
+ if (info->id == LTC2943_ID) {
if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP)
prescaler_exp = LTC2943_MAX_PRESCALER_EXP;
info->Qlsb = ((340 * 50000) / r_sense) /
@@ -424,18 +424,17 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
info->client = client;
info->supply_desc.type = POWER_SUPPLY_TYPE_BATTERY;
info->supply_desc.properties = ltc294x_properties;
- if (info->num_regs >= LTC294X_REG_TEMPERATURE_LSB)
+ switch (info->id) {
+ case LTC2943_ID:
info->supply_desc.num_properties =
ARRAY_SIZE(ltc294x_properties);
- else if (info->num_regs >= LTC294X_REG_CURRENT_LSB)
- info->supply_desc.num_properties =
- ARRAY_SIZE(ltc294x_properties) - 1;
- else if (info->num_regs >= LTC294X_REG_VOLTAGE_LSB)
- info->supply_desc.num_properties =
- ARRAY_SIZE(ltc294x_properties) - 2;
- else
+ break;
+ case LTC2941_ID:
+ default:
info->supply_desc.num_properties =
ARRAY_SIZE(ltc294x_properties) - 3;
+ break;
+ }
info->supply_desc.get_property = ltc294x_get_property;
info->supply_desc.set_property = ltc294x_set_property;
info->supply_desc.property_is_writeable = ltc294x_property_is_writeable;
@@ -492,8 +491,8 @@ static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
static const struct i2c_device_id ltc294x_i2c_id[] = {
- {"ltc2941", LTC2941_NUM_REGS},
- {"ltc2943", LTC2943_NUM_REGS},
+ { "ltc2941", LTC2941_ID, },
+ { "ltc2943", LTC2943_ID, },
{ },
};
MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
@@ -501,11 +500,11 @@ MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
static const struct of_device_id ltc294x_i2c_of_match[] = {
{
.compatible = "lltc,ltc2941",
- .data = (void *)LTC2941_NUM_REGS
+ .data = (void *)LTC2941_ID,
},
{
.compatible = "lltc,ltc2943",
- .data = (void *)LTC2943_NUM_REGS
+ .data = (void *)LTC2943_ID,
},
{ },
};