regulator: arizona-ldo1: Support 1.8V mode

Some Arizona device support a 1.8V output mode. Enable this in the driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 106 insertions, 1 deletions

diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 800c8ad3db91..739faf99b9e2 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -34,6 +34,108 @@ struct arizona_ldo1 {
 	struct regulator_init_data init_data;
 };
 
+static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
+					unsigned int selector)
+{
+	if (selector >= rdev->desc->n_voltages)
+		return -EINVAL;
+
+	if (selector == rdev->desc->n_voltages - 1)
+		return 1800000;
+	else
+		return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
+}
+
+static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
+				       int min_uV, int max_uV)
+{
+	int sel;
+
+	sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
+	if (sel >= rdev->desc->n_voltages)
+		sel = rdev->desc->n_voltages - 1;
+
+	return sel;
+}
+
+static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
+					   unsigned sel)
+{
+	struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
+	struct regmap *regmap = ldo->arizona->regmap;
+	unsigned int val;
+	int ret;
+
+	if (sel == rdev->desc->n_voltages - 1)
+		val = ARIZONA_LDO1_HI_PWR;
+	else
+		val = 0;
+
+	ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2,
+				 ARIZONA_LDO1_HI_PWR, val);
+	if (ret != 0)
+		return ret;
+
+	ret = regmap_update_bits(regmap, ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
+				 ARIZONA_SUBSYS_MAX_FREQ, val);
+	if (ret != 0)
+		return ret;
+
+	if (val)
+		return 0;
+
+	val = sel << ARIZONA_LDO1_VSEL_SHIFT;
+
+	return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
+				  ARIZONA_LDO1_VSEL_MASK, val);
+}
+
+static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
+	struct regmap *regmap = ldo->arizona->regmap;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val);
+	if (ret != 0)
+		return ret;
+
+	if (val & ARIZONA_LDO1_HI_PWR)
+		return rdev->desc->n_voltages - 1;
+
+	ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
+	if (ret != 0)
+		return ret;
+
+	return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
+}
+
+static struct regulator_ops arizona_ldo1_hc_ops = {
+	.list_voltage = arizona_ldo1_hc_list_voltage,
+	.map_voltage = arizona_ldo1_hc_map_voltage,
+	.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
+	.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
+};
+
+static const struct regulator_desc arizona_ldo1_hc = {
+	.name = "LDO1",
+	.supply_name = "LDOVDD",
+	.type = REGULATOR_VOLTAGE,
+	.ops = &arizona_ldo1_hc_ops,
+
+	.bypass_reg = ARIZONA_LDO1_CONTROL_1,
+	.bypass_mask = ARIZONA_LDO1_BYPASS,
+	.min_uV = 900000,
+	.uV_step = 50000,
+	.n_voltages = 8,
+	.enable_time = 500,
+
+	.owner = THIS_MODULE,
+};
+
 static struct regulator_ops arizona_ldo1_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
@@ -81,6 +183,7 @@ static const struct regulator_init_data arizona_ldo1_default = {
 static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	const struct regulator_desc *desc;
 	struct regulator_config config = { };
 	struct arizona_ldo1 *ldo1;
 	int ret;
@@ -100,9 +203,11 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
 	 */
 	switch (arizona->type) {
 	case WM5102:
+		desc = &arizona_ldo1_hc;
 		ldo1->init_data = arizona_ldo1_dvfs;
 		break;
 	default:
+		desc = &arizona_ldo1;
 		ldo1->init_data = arizona_ldo1_default;
 		break;
 	}
@@ -121,7 +226,7 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
 	else
 		config.init_data = &ldo1->init_data;
 
-	ldo1->regulator = regulator_register(&arizona_ldo1, &config);
+	ldo1->regulator = regulator_register(desc, &config);
 	if (IS_ERR(ldo1->regulator)) {
 		ret = PTR_ERR(ldo1->regulator);
 		dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",