diff options
author | Douglas Anderson <dianders@chromium.org> | 2018-11-20 18:52:53 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2018-11-22 15:38:00 +0100 |
commit | 5451781dadf85000665e0e2c3288e9e0f34b860a (patch) | |
tree | ce7eebcf6b158e90e86385800bb8cc654932b69d /drivers/regulator | |
parent | regulator: wm8994: Don't use devres for enable GPIOs (diff) | |
download | linux-5451781dadf85000665e0e2c3288e9e0f34b860a.tar.xz linux-5451781dadf85000665e0e2c3288e9e0f34b860a.zip |
regulator: core: Only count load for enabled consumers
In general when the consumer of a regulator requests that the
regulator be disabled it no longer will be drawing much load from the
regulator--it should just be the leakage current and that should be
very close to 0.
Up to this point the regulator framework has continued to count a
consumer's load request for disabled regulators. This has led to code
patterns that look like this:
enable_my_thing():
regular_set_load(reg, load_uA)
regulator_enable(reg)
disable_my_thing():
regulator_disable(reg)
regulator_set_load(reg, 0)
Sometimes disable_my_thing() sets a nominal (<= 100 uA) load instead
of setting a 0 uA load. I will make the assertion that nearly all (if
not all) places where we set a nominal load of 100 uA or less we end
up with a result that is the same as if we had set a load of 0 uA.
Specifically:
- The whole point of setting the load is to help set the operating
mode of the regulator. Higher loads may need less efficient
operating modes.
- The only time this matters at all is if there is another consumer of
the regulator that wants the regulator on. If there are no other
consumers of the regulator then the regulator will turn off and we
don't care about the operating mode.
- If there's another consumer that actually wants the regulator on
then presumably it is requesting a load that makes our nominal
<= 100 uA load insignificant.
A quick survey of the existing callers to regulator_set_load() to see
how everyone uses it:
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/core.c | 193 | ||||
-rw-r--r-- | drivers/regulator/internal.h | 2 |
2 files changed, 144 insertions, 51 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index ff5ca185bb8f..26a0c523ed86 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -99,7 +99,7 @@ struct regulator_supply_alias { }; static int _regulator_is_enabled(struct regulator_dev *rdev); -static int _regulator_disable(struct regulator_dev *rdev); +static int _regulator_disable(struct regulator *regulator); static int _regulator_get_voltage(struct regulator_dev *rdev); static int _regulator_get_current_limit(struct regulator_dev *rdev); static unsigned int _regulator_get_mode(struct regulator_dev *rdev); @@ -764,8 +764,10 @@ static ssize_t regulator_total_uA_show(struct device *dev, int uA = 0; regulator_lock(rdev); - list_for_each_entry(regulator, &rdev->consumer_list, list) - uA += regulator->uA_load; + list_for_each_entry(regulator, &rdev->consumer_list, list) { + if (regulator->enable_count) + uA += regulator->uA_load; + } regulator_unlock(rdev); return sprintf(buf, "%d\n", uA); } @@ -938,8 +940,10 @@ static int drms_uA_update(struct regulator_dev *rdev) return -EINVAL; /* calc total requested load */ - list_for_each_entry(sibling, &rdev->consumer_list, list) - current_uA += sibling->uA_load; + list_for_each_entry(sibling, &rdev->consumer_list, list) { + if (sibling->enable_count) + current_uA += sibling->uA_load; + } current_uA += rdev->constraints->system_load; @@ -2024,6 +2028,9 @@ static void _regulator_put(struct regulator *regulator) lockdep_assert_held_once(®ulator_list_mutex); + /* Docs say you must disable before calling regulator_put() */ + WARN_ON(regulator->enable_count); + rdev = regulator->rdev; debugfs_remove_recursive(regulator->debugfs); @@ -2417,15 +2424,75 @@ static int _regulator_do_enable(struct regulator_dev *rdev) return 0; } +/** + * _regulator_handle_consumer_enable - handle that a consumer enabled + * @regulator: regulator source + * + * Some things on a regulator consumer (like the contribution towards total + * load on the regulator) only have an effect when the consumer wants the + * regulator enabled. Explained in example with two consumers of the same + * regulator: + * consumer A: set_load(100); => total load = 0 + * consumer A: regulator_enable(); => total load = 100 + * consumer B: set_load(1000); => total load = 100 + * consumer B: regulator_enable(); => total load = 1100 + * consumer A: regulator_disable(); => total_load = 1000 + * + * This function (together with _regulator_handle_consumer_disable) is + * responsible for keeping track of the refcount for a given regulator consumer + * and applying / unapplying these things. + * + * Returns 0 upon no error; -error upon error. + */ +static int _regulator_handle_consumer_enable(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + + lockdep_assert_held_once(&rdev->mutex.base); + + regulator->enable_count++; + if (regulator->uA_load && regulator->enable_count == 1) + return drms_uA_update(rdev); + + return 0; +} + +/** + * _regulator_handle_consumer_disable - handle that a consumer disabled + * @regulator: regulator source + * + * The opposite of _regulator_handle_consumer_enable(). + * + * Returns 0 upon no error; -error upon error. + */ +static int _regulator_handle_consumer_disable(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + + lockdep_assert_held_once(&rdev->mutex.base); + + if (!regulator->enable_count) { + rdev_err(rdev, "Underflow of regulator enable count\n"); + return -EINVAL; + } + + regulator->enable_count--; + if (regulator->uA_load && regulator->enable_count == 0) + return drms_uA_update(rdev); + + return 0; +} + /* locks held by regulator_enable() */ -static int _regulator_enable(struct regulator_dev *rdev) +static int _regulator_enable(struct regulator *regulator) { + struct regulator_dev *rdev = regulator->rdev; int ret; lockdep_assert_held_once(&rdev->mutex.base); if (rdev->supply) { - ret = _regulator_enable(rdev->supply->rdev); + ret = _regulator_enable(rdev->supply); if (ret < 0) return ret; } @@ -2437,9 +2504,9 @@ static int _regulator_enable(struct regulator_dev *rdev) goto err_disable_supply; } - /* check voltage and requested load before enabling */ - if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) - drms_uA_update(rdev); + ret = _regulator_handle_consumer_enable(regulator); + if (ret < 0) + goto err_disable_supply; if (rdev->use_count == 0) { /* The regulator may on if it's not switchable or left on */ @@ -2448,18 +2515,18 @@ static int _regulator_enable(struct regulator_dev *rdev) if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) { ret = -EPERM; - goto err_disable_supply; + goto err_consumer_disable; } ret = _regulator_do_enable(rdev); if (ret < 0) - goto err_disable_supply; + goto err_consumer_disable; _notifier_call_chain(rdev, REGULATOR_EVENT_ENABLE, NULL); } else if (ret < 0) { rdev_err(rdev, "is_enabled() failed: %d\n", ret); - goto err_disable_supply; + goto err_consumer_disable; } /* Fallthrough on positive return values - already enabled */ } @@ -2468,9 +2535,12 @@ static int _regulator_enable(struct regulator_dev *rdev) return 0; +err_consumer_disable: + _regulator_handle_consumer_disable(regulator); + err_disable_supply: if (rdev->supply) - _regulator_disable(rdev->supply->rdev); + _regulator_disable(rdev->supply); return ret; } @@ -2490,13 +2560,10 @@ int regulator_enable(struct regulator *regulator) { struct regulator_dev *rdev = regulator->rdev; struct ww_acquire_ctx ww_ctx; - int ret = 0; - - if (regulator->always_on) - return 0; + int ret; regulator_lock_dependent(rdev, &ww_ctx); - ret = _regulator_enable(rdev); + ret = _regulator_enable(regulator); regulator_unlock_dependent(rdev, &ww_ctx); return ret; @@ -2535,8 +2602,9 @@ static int _regulator_do_disable(struct regulator_dev *rdev) } /* locks held by regulator_disable() */ -static int _regulator_disable(struct regulator_dev *rdev) +static int _regulator_disable(struct regulator *regulator) { + struct regulator_dev *rdev = regulator->rdev; int ret = 0; lockdep_assert_held_once(&rdev->mutex.base); @@ -2571,17 +2639,17 @@ static int _regulator_disable(struct regulator_dev *rdev) rdev->use_count = 0; } else if (rdev->use_count > 1) { - if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) - drms_uA_update(rdev); - rdev->use_count--; } + if (ret == 0) + ret = _regulator_handle_consumer_disable(regulator); + if (ret == 0 && rdev->coupling_desc.n_coupled > 1) ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON); if (ret == 0 && rdev->supply) - ret = _regulator_disable(rdev->supply->rdev); + ret = _regulator_disable(rdev->supply); return ret; } @@ -2602,13 +2670,10 @@ int regulator_disable(struct regulator *regulator) { struct regulator_dev *rdev = regulator->rdev; struct ww_acquire_ctx ww_ctx; - int ret = 0; - - if (regulator->always_on) - return 0; + int ret; regulator_lock_dependent(rdev, &ww_ctx); - ret = _regulator_disable(rdev); + ret = _regulator_disable(regulator); regulator_unlock_dependent(rdev, &ww_ctx); return ret; @@ -2657,10 +2722,17 @@ int regulator_force_disable(struct regulator *regulator) int ret; regulator_lock_dependent(rdev, &ww_ctx); - regulator->uA_load = 0; + ret = _regulator_force_disable(regulator->rdev); + if (rdev->coupling_desc.n_coupled > 1) regulator_balance_voltage(rdev, PM_SUSPEND_ON); + + if (regulator->uA_load) { + regulator->uA_load = 0; + ret = drms_uA_update(rdev); + } + regulator_unlock_dependent(rdev, &ww_ctx); if (rdev->supply) @@ -2677,14 +2749,11 @@ static void regulator_disable_work(struct work_struct *work) disable_work.work); struct ww_acquire_ctx ww_ctx; int count, i, ret; + struct regulator *regulator; + int total_count = 0; regulator_lock_dependent(rdev, &ww_ctx); - BUG_ON(!rdev->deferred_disables); - - count = rdev->deferred_disables; - rdev->deferred_disables = 0; - /* * Workqueue functions queue the new work instance while the previous * work instance is being processed. Cancel the queued work instance @@ -2693,11 +2762,22 @@ static void regulator_disable_work(struct work_struct *work) */ cancel_delayed_work(&rdev->disable_work); - for (i = 0; i < count; i++) { - ret = _regulator_disable(rdev); - if (ret != 0) - rdev_err(rdev, "Deferred disable failed: %d\n", ret); + list_for_each_entry(regulator, &rdev->consumer_list, list) { + count = regulator->deferred_disables; + + if (!count) + continue; + + total_count += count; + regulator->deferred_disables = 0; + + for (i = 0; i < count; i++) { + ret = _regulator_disable(regulator); + if (ret != 0) + rdev_err(rdev, "Deferred disable failed: %d\n", ret); + } } + WARN_ON(!total_count); if (rdev->coupling_desc.n_coupled > 1) regulator_balance_voltage(rdev, PM_SUSPEND_ON); @@ -2731,14 +2811,11 @@ int regulator_disable_deferred(struct regulator *regulator, int ms) { struct regulator_dev *rdev = regulator->rdev; - if (regulator->always_on) - return 0; - if (!ms) return regulator_disable(regulator); regulator_lock(rdev); - rdev->deferred_disables++; + regulator->deferred_disables++; mod_delayed_work(system_power_efficient_wq, &rdev->disable_work, msecs_to_jiffies(ms)); regulator_unlock(rdev); @@ -4145,16 +4222,30 @@ EXPORT_SYMBOL_GPL(regulator_get_error_flags); * DRMS will sum the total requested load on the regulator and change * to the most efficient operating mode if platform constraints allow. * + * NOTE: when a regulator consumer requests to have a regulator + * disabled then any load that consumer requested no longer counts + * toward the total requested load. If the regulator is re-enabled + * then the previously requested load will start counting again. + * + * If a regulator is an always-on regulator then an individual consumer's + * load will still be removed if that consumer is fully disabled. + * * On error a negative errno is returned. */ int regulator_set_load(struct regulator *regulator, int uA_load) { struct regulator_dev *rdev = regulator->rdev; - int ret; + int old_uA_load; + int ret = 0; regulator_lock(rdev); + old_uA_load = regulator->uA_load; regulator->uA_load = uA_load; - ret = drms_uA_update(rdev); + if (regulator->enable_count && old_uA_load != uA_load) { + ret = drms_uA_update(rdev); + if (ret < 0) + regulator->uA_load = old_uA_load; + } regulator_unlock(rdev); return ret; @@ -4325,11 +4416,8 @@ int regulator_bulk_enable(int num_consumers, int ret = 0; for (i = 0; i < num_consumers; i++) { - if (consumers[i].consumer->always_on) - consumers[i].ret = 0; - else - async_schedule_domain(regulator_bulk_enable_async, - &consumers[i], &async_domain); + async_schedule_domain(regulator_bulk_enable_async, + &consumers[i], &async_domain); } async_synchronize_full_domain(&async_domain); @@ -5225,8 +5313,11 @@ static void regulator_summary_show_subtree(struct seq_file *s, switch (rdev->desc->type) { case REGULATOR_VOLTAGE: - seq_printf(s, "%37dmA %5dmV %5dmV", + seq_printf(s, "%3d %33dmA%c%5dmV %5dmV", + consumer->enable_count, consumer->uA_load / 1000, + consumer->uA_load && !consumer->enable_count ? + '*' : ' ', consumer->voltage[PM_SUSPEND_ON].min_uV / 1000, consumer->voltage[PM_SUSPEND_ON].max_uV / 1000); break; diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h index 943926a156f2..6017f15c5d75 100644 --- a/drivers/regulator/internal.h +++ b/drivers/regulator/internal.h @@ -42,6 +42,8 @@ struct regulator { unsigned int always_on:1; unsigned int bypass:1; int uA_load; + unsigned int enable_count; + unsigned int deferred_disables; struct regulator_voltage voltage[REGULATOR_STATES_NUM]; const char *supply_name; struct device_attribute dev_attr; |