Merge tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.18

This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).

It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.

The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.

The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.

The RPM power-domain driver gains MSM8226 support.

Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.

* tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (37 commits)
  soc: qcom: rpmpd: Add MSM8226 support
  dt-bindings: power: rpmpd: Add MSM8226 to rpmpd binding
  soc: qcom: mdt_loader: Fix split-firmware condition
  dt-bindings: arm: msm: Add LLCC compatible for SM8450
  dt-bindings: arm: msm: Add LLCC compatible for SM8350
  soc: qcom: llcc: Add configuration data for SM8450 SoC
  soc: qcom: llcc: Update register offsets for newer LLCC HW
  soc: qcom: llcc: Add missing llcc configuration data
  soc: qcom: llcc: Add write-cache cacheable support
  soc: qcom: llcc: Update the logic for version info extraction
  soc: qcom: llcc: Add support for 16 ways of allocation
  soc: qcom: socinfo: Add some more PMICs and SoCs
  firmware: qcom: scm: Add support for MC boot address API
  firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()
  firmware: qcom: scm: Simplify set_cold/warm_boot_addr()
  cpuidle: qcom-spm: Check if any CPU is managed by SPM
  remoteproc: qcom: pas: Add SM8450 remoteproc support
  dt-bindings: remoteproc: qcom: pas: Add SM8450 PAS compatibles
  remoteproc: qcom: pas: Carry PAS metadata context
  soc: qcom: mdt_loader: Extract PAS operations
  ...

Link: https://lore.kernel.org/r/20220301042055.1804859-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 37 insertions, 6 deletions

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 43ea8455546c..a2c231a17b2b 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -928,7 +928,8 @@ static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
 	regmap_write(halt_map, offset + AXI_HALTREQ_REG, 0);
 }
 
-static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
+static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw,
+				const char *fw_name)
 {
 	unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
 	dma_addr_t phys;
@@ -939,7 +940,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
 	void *ptr;
 	int ret;
 
-	metadata = qcom_mdt_read_metadata(fw, &size);
+	metadata = qcom_mdt_read_metadata(fw, &size, fw_name, qproc->dev);
 	if (IS_ERR(metadata))
 		return PTR_ERR(metadata);
 
@@ -1289,7 +1290,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	/* Initialize the RMB validator */
 	writel(0, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
 
-	ret = q6v5_mpss_init_image(qproc, fw);
+	ret = q6v5_mpss_init_image(qproc, fw, qproc->hexagon_mdt_image);
 	if (ret)
 		goto release_firmware;
 
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 184bb7cdf95a..1ae47cc153e5 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -79,6 +79,8 @@ struct qcom_adsp {
 	struct qcom_rproc_subdev smd_subdev;
 	struct qcom_rproc_ssr ssr_subdev;
 	struct qcom_sysmon *sysmon;
+
+	struct qcom_scm_pas_metadata pas_metadata;
 };
 
 static void adsp_minidump(struct rproc *rproc)
@@ -126,14 +128,34 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
 	}
 }
 
+static int adsp_unprepare(struct rproc *rproc)
+{
+	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+
+	/*
+	 * adsp_load() did pass pas_metadata to the SCM driver for storing
+	 * metadata context. It might have been released already if
+	 * auth_and_reset() was successful, but in other cases clean it up
+	 * here.
+	 */
+	qcom_scm_pas_metadata_release(&adsp->pas_metadata);
+
+	return 0;
+}
+
 static int adsp_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
 	int ret;
 
-	ret = qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id,
-			    adsp->mem_region, adsp->mem_phys, adsp->mem_size,
-			    &adsp->mem_reloc);
+	ret = qcom_mdt_pas_init(adsp->dev, fw, rproc->firmware, adsp->pas_id,
+				adsp->mem_phys, &adsp->pas_metadata);
+	if (ret)
+		return ret;
+
+	ret = qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, adsp->pas_id,
+				    adsp->mem_region, adsp->mem_phys, adsp->mem_size,
+				    &adsp->mem_reloc);
 	if (ret)
 		return ret;
 
@@ -185,6 +207,8 @@ static int adsp_start(struct rproc *rproc)
 		goto disable_px_supply;
 	}
 
+	qcom_scm_pas_metadata_release(&adsp->pas_metadata);
+
 	return 0;
 
 disable_px_supply:
@@ -255,6 +279,7 @@ static unsigned long adsp_panic(struct rproc *rproc)
 }
 
 static const struct rproc_ops adsp_ops = {
+	.unprepare = adsp_unprepare,
 	.start = adsp_start,
 	.stop = adsp_stop,
 	.da_to_va = adsp_da_to_va,
@@ -264,6 +289,7 @@ static const struct rproc_ops adsp_ops = {
 };
 
 static const struct rproc_ops adsp_minidump_ops = {
+	.unprepare = adsp_unprepare,
 	.start = adsp_start,
 	.stop = adsp_stop,
 	.da_to_va = adsp_da_to_va,
@@ -853,6 +879,10 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sm8350-cdsp-pas", .data = &sm8350_cdsp_resource},
 	{ .compatible = "qcom,sm8350-slpi-pas", .data = &sm8350_slpi_resource},
 	{ .compatible = "qcom,sm8350-mpss-pas", .data = &mpss_resource_init},
+	{ .compatible = "qcom,sm8450-adsp-pas", .data = &sm8350_adsp_resource},
+	{ .compatible = "qcom,sm8450-cdsp-pas", .data = &sm8350_cdsp_resource},
+	{ .compatible = "qcom,sm8450-slpi-pas", .data = &sm8350_slpi_resource},
+	{ .compatible = "qcom,sm8450-mpss-pas", .data = &mpss_resource_init},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, adsp_of_match);