[SCSI] zfcp: remove unused references, declarations and flags

 - Remove unused references and declarations, including one instance
   of the FC ls_adisc struct that has been defined twice.
 - Also remove the flags COMMON_OPENING, COMMON_CLOSING,
   ADAPTER_REGISTERED and XPORT_OK that are only set and cleared, but
   not checked anywhere.
 - Remove the zfcp specific atomic_test_mask makro. Simply use
   atomic_read directly instead.
 - Remove the zfcp internal sg helper functions and switch the places
   where it is still used to call sg_virt directly.
 - With the update of the QDIO code, the QDIO data structures no
   longer use the volatile type qualifier. Now we can also remove the
   volatile qualifiers from the zfcp code.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 0 insertions, 75 deletions

diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h
index bf94b4da0763..fd3a88777ac8 100644
--- a/drivers/s390/scsi/zfcp_fsf.h
+++ b/drivers/s390/scsi/zfcp_fsf.h
@@ -71,13 +71,6 @@
 #define FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED	0x00000041
 #define FSF_ELS_COMMAND_REJECTED		0x00000050
 #define FSF_GENERIC_COMMAND_REJECTED		0x00000051
-#define FSF_OPERATION_PARTIALLY_SUCCESSFUL	0x00000052
-#define FSF_AUTHORIZATION_FAILURE		0x00000053
-#define FSF_CFDC_ERROR_DETECTED			0x00000054
-#define FSF_CONTROL_FILE_UPDATE_ERROR		0x00000055
-#define FSF_CONTROL_FILE_TOO_LARGE		0x00000056
-#define FSF_ACCESS_CONFLICT_DETECTED		0x00000057
-#define FSF_CONFLICTS_OVERRULED			0x00000058
 #define FSF_PORT_BOXED				0x00000059
 #define FSF_LUN_BOXED				0x0000005A
 #define FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE	0x0000005B
@@ -85,9 +78,7 @@
 #define FSF_REQUEST_SIZE_TOO_LARGE		0x00000061
 #define FSF_RESPONSE_SIZE_TOO_LARGE		0x00000062
 #define FSF_SBAL_MISMATCH			0x00000063
-#define FSF_OPEN_PORT_WITHOUT_PRLI		0x00000064
 #define FSF_ADAPTER_STATUS_AVAILABLE		0x000000AD
-#define FSF_FCP_RSP_AVAILABLE			0x000000AF
 #define FSF_UNKNOWN_COMMAND			0x000000E2
 #define FSF_UNKNOWN_OP_SUBTYPE                  0x000000E3
 #define FSF_INVALID_COMMAND_OPTION              0x000000E5
@@ -102,20 +93,9 @@
 #define FSF_SQ_RETRY_IF_POSSIBLE		0x02
 #define FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED	0x03
 #define FSF_SQ_INVOKE_LINK_TEST_PROCEDURE	0x04
-#define FSF_SQ_ULP_PROGRAMMING_ERROR		0x05
 #define FSF_SQ_COMMAND_ABORTED			0x06
 #define FSF_SQ_NO_RETRY_POSSIBLE		0x07
 
-/* FSF status qualifier for CFDC commands */
-#define FSF_SQ_CFDC_HARDENED_ON_SE		0x00000000
-#define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE	0x00000001
-#define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE2	0x00000002
-/* CFDC subtable codes */
-#define FSF_SQ_CFDC_SUBTABLE_OS			0x0001
-#define FSF_SQ_CFDC_SUBTABLE_PORT_WWPN		0x0002
-#define FSF_SQ_CFDC_SUBTABLE_PORT_DID		0x0003
-#define FSF_SQ_CFDC_SUBTABLE_LUN		0x0004
-
 /* FSF status qualifier (most significant 4 bytes), local link down */
 #define FSF_PSQ_LINK_NO_LIGHT			0x00000004
 #define FSF_PSQ_LINK_WRAP_PLUG			0x00000008
@@ -145,7 +125,6 @@
 #define FSF_STATUS_READ_LINK_UP          	0x00000006
 #define FSF_STATUS_READ_NOTIFICATION_LOST	0x00000009
 #define FSF_STATUS_READ_CFDC_UPDATED		0x0000000A
-#define FSF_STATUS_READ_CFDC_HARDENED		0x0000000B
 #define FSF_STATUS_READ_FEATURE_UPDATE_ALERT	0x0000000C
 
 /* status subtypes in status read buffer */
@@ -159,20 +138,9 @@
 
 /* status subtypes for unsolicited status notification lost */
 #define FSF_STATUS_READ_SUB_INCOMING_ELS	0x00000001
-#define FSF_STATUS_READ_SUB_SENSE_DATA		0x00000002
-#define FSF_STATUS_READ_SUB_LINK_STATUS		0x00000004
-#define FSF_STATUS_READ_SUB_PORT_CLOSED		0x00000008
-#define FSF_STATUS_READ_SUB_BIT_ERROR_THRESHOLD	0x00000010
 #define FSF_STATUS_READ_SUB_ACT_UPDATED		0x00000020
-#define FSF_STATUS_READ_SUB_ACT_HARDENED	0x00000040
-#define FSF_STATUS_READ_SUB_FEATURE_UPDATE_ALERT 0x00000080
-
-/* status subtypes for CFDC */
-#define FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE	0x00000002
-#define FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE2 0x0000000F
 
 /* topologie that is detected by the adapter */
-#define FSF_TOPO_ERROR				0x00000000
 #define FSF_TOPO_P2P				0x00000001
 #define FSF_TOPO_FABRIC				0x00000002
 #define FSF_TOPO_AL				0x00000003
@@ -180,17 +148,13 @@
 /* data direction for FCP commands */
 #define FSF_DATADIR_WRITE			0x00000001
 #define FSF_DATADIR_READ			0x00000002
-#define FSF_DATADIR_READ_WRITE			0x00000003
 #define FSF_DATADIR_CMND			0x00000004
 
 /* fc service class */
-#define FSF_CLASS_1				0x00000001
-#define FSF_CLASS_2				0x00000002
 #define FSF_CLASS_3				0x00000003
 
 /* SBAL chaining */
 #define FSF_MAX_SBALS_PER_REQ			36
-#define FSF_MAX_SBALS_PER_ELS_REQ		2
 
 /* logging space behind QTCB */
 #define FSF_QTCB_LOG_SIZE			1024
@@ -200,50 +164,16 @@
 #define FSF_FEATURE_LUN_SHARING			0x00000004
 #define FSF_FEATURE_NOTIFICATION_LOST		0x00000008
 #define FSF_FEATURE_HBAAPI_MANAGEMENT           0x00000010
-#define FSF_FEATURE_ELS_CT_CHAINED_SBALS        0x00000020
 #define FSF_FEATURE_UPDATE_ALERT		0x00000100
 #define FSF_FEATURE_MEASUREMENT_DATA		0x00000200
 
 /* host connection features */
 #define FSF_FEATURE_NPIV_MODE			0x00000001
-#define FSF_FEATURE_VM_ASSIGNED_WWPN		0x00000002
 
 /* option */
 #define FSF_OPEN_LUN_SUPPRESS_BOXING		0x00000001
-#define FSF_OPEN_LUN_REPLICATE_SENSE		0x00000002
-
-/* adapter types */
-#define FSF_ADAPTER_TYPE_FICON                  0x00000001
-#define FSF_ADAPTER_TYPE_FICON_EXPRESS          0x00000002
-
-/* port types */
-#define FSF_HBA_PORTTYPE_UNKNOWN		0x00000001
-#define FSF_HBA_PORTTYPE_NOTPRESENT		0x00000003
-#define FSF_HBA_PORTTYPE_NPORT			0x00000005
-#define FSF_HBA_PORTTYPE_PTP			0x00000021
-/* following are not defined and used by FSF Spec
-   but are additionally defined by FC-HBA */
-#define FSF_HBA_PORTTYPE_OTHER			0x00000002
-#define FSF_HBA_PORTTYPE_NOTPRESENT		0x00000003
-#define FSF_HBA_PORTTYPE_NLPORT			0x00000006
-#define FSF_HBA_PORTTYPE_FLPORT			0x00000007
-#define FSF_HBA_PORTTYPE_FPORT			0x00000008
-#define FSF_HBA_PORTTYPE_LPORT			0x00000020
-
-/* port states */
-#define FSF_HBA_PORTSTATE_UNKNOWN		0x00000001
-#define FSF_HBA_PORTSTATE_ONLINE		0x00000002
-#define FSF_HBA_PORTSTATE_OFFLINE		0x00000003
-#define FSF_HBA_PORTSTATE_LINKDOWN		0x00000006
-#define FSF_HBA_PORTSTATE_ERROR			0x00000007
-
-/* IO states of adapter */
-#define FSF_IOSTAT_NPORT_RJT			0x00000004
-#define FSF_IOSTAT_FABRIC_RJT			0x00000005
-#define FSF_IOSTAT_LS_RJT			0x00000009
 
 /* open LUN access flags*/
-#define FSF_UNIT_ACCESS_OPEN_LUN_ALLOWED	0x01000000
 #define FSF_UNIT_ACCESS_EXCLUSIVE		0x02000000
 #define FSF_UNIT_ACCESS_OUTBOUND_TRANSFER	0x10000000
 
@@ -265,11 +195,6 @@ struct fsf_queue_designator {
 	u32 res1;
 } __attribute__ ((packed));
 
-struct fsf_port_closed_payload {
-	struct fsf_queue_designator queue_designator;
-	u32                         port_handle;
-} __attribute__ ((packed));
-
 struct fsf_bit_error_payload {
 	u32 res1;
 	u32 link_failure_error_count;