s390/zcrypt: add support for EP11 coprocessor cards

This feature extends the generic cryptographic device driver (zcrypt)
with a new capability to service EP11 requests for the Crypto Express4S
card in EP11 (Enterprise PKCS#11 mode) coprocessor mode.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

11 files changed, 467 insertions, 14 deletions

diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 02300dcfac91..ab3baa7f9508 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -591,7 +591,13 @@ static int ap_init_queue(ap_qid_t qid)
 		if (rc != -ENODEV && rc != -EBUSY)
 			break;
 		if (i < AP_MAX_RESET - 1) {
-			udelay(5);
+			/* Time we are waiting until we give up (0.7sec * 90).
+			 * Since the actual request (in progress) will not
+			 * interrupted immediately for the reset command,
+			 * we have to be patient. In worst case we have to
+			 * wait 60sec + reset time (some msec).
+			 */
+			schedule_timeout(AP_RESET_TIMEOUT);
 			status = ap_test_queue(qid, &dummy, &dummy);
 		}
 	}
@@ -992,6 +998,28 @@ static ssize_t ap_domain_show(struct bus_type *bus, char *buf)
 
 static BUS_ATTR(ap_domain, 0444, ap_domain_show, NULL);
 
+static ssize_t ap_control_domain_mask_show(struct bus_type *bus, char *buf)
+{
+	if (ap_configuration != NULL) { /* QCI not supported */
+		if (test_facility(76)) { /* format 1 - 256 bit domain field */
+			return snprintf(buf, PAGE_SIZE,
+				"0x%08x%08x%08x%08x%08x%08x%08x%08x\n",
+			ap_configuration->adm[0], ap_configuration->adm[1],
+			ap_configuration->adm[2], ap_configuration->adm[3],
+			ap_configuration->adm[4], ap_configuration->adm[5],
+			ap_configuration->adm[6], ap_configuration->adm[7]);
+		} else { /* format 0 - 16 bit domain field */
+			return snprintf(buf, PAGE_SIZE, "%08x%08x\n",
+			ap_configuration->adm[0], ap_configuration->adm[1]);
+		  }
+	} else {
+		return snprintf(buf, PAGE_SIZE, "not supported\n");
+	  }
+}
+
+static BUS_ATTR(ap_control_domain_mask, 0444,
+		ap_control_domain_mask_show, NULL);
+
 static ssize_t ap_config_time_show(struct bus_type *bus, char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%d\n", ap_config_time);
@@ -1077,6 +1105,7 @@ static BUS_ATTR(poll_timeout, 0644, poll_timeout_show, poll_timeout_store);
 
 static struct bus_attribute *const ap_bus_attrs[] = {
 	&bus_attr_ap_domain,
+	&bus_attr_ap_control_domain_mask,
 	&bus_attr_config_time,
 	&bus_attr_poll_thread,
 	&bus_attr_ap_interrupts,
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 685f6cc022f9..6405ae24a7a6 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -33,7 +33,7 @@
 #define AP_DEVICES 64		/* Number of AP devices. */
 #define AP_DOMAINS 16		/* Number of AP domains. */
 #define AP_MAX_RESET 90		/* Maximum number of resets. */
-#define AP_RESET_TIMEOUT (HZ/2)	/* Time in ticks for reset timeouts. */
+#define AP_RESET_TIMEOUT (HZ*0.7)	/* Time in ticks for reset timeouts. */
 #define AP_CONFIG_TIME 30	/* Time in seconds between AP bus rescans. */
 #define AP_POLL_TIME 1		/* Time in ticks between receive polls. */
 
@@ -125,6 +125,8 @@ static inline int ap_test_bit(unsigned int *ptr, unsigned int nr)
 #define AP_FUNC_CRT4K 2
 #define AP_FUNC_COPRO 3
 #define AP_FUNC_ACCEL 4
+#define AP_FUNC_EP11  5
+#define AP_FUNC_APXA  6
 
 /*
  * AP reset flag states
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index 31cfaa556072..4b824b15194f 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -44,6 +44,8 @@
 #include "zcrypt_debug.h"
 #include "zcrypt_api.h"
 
+#include "zcrypt_msgtype6.h"
+
 /*
  * Module description.
  */
@@ -554,9 +556,9 @@ static long zcrypt_send_cprb(struct ica_xcRB *xcRB)
 	spin_lock_bh(&zcrypt_device_lock);
 	list_for_each_entry(zdev, &zcrypt_device_list, list) {
 		if (!zdev->online || !zdev->ops->send_cprb ||
-		    (xcRB->user_defined != AUTOSELECT &&
-			AP_QID_DEVICE(zdev->ap_dev->qid) != xcRB->user_defined)
-		    )
+		   (zdev->ops->variant == MSGTYPE06_VARIANT_EP11) ||
+		   (xcRB->user_defined != AUTOSELECT &&
+		    AP_QID_DEVICE(zdev->ap_dev->qid) != xcRB->user_defined))
 			continue;
 		zcrypt_device_get(zdev);
 		get_device(&zdev->ap_dev->device);
@@ -581,6 +583,90 @@ static long zcrypt_send_cprb(struct ica_xcRB *xcRB)
 	return -ENODEV;
 }
 
+struct ep11_target_dev_list {
+	unsigned short		targets_num;
+	struct ep11_target_dev	*targets;
+};
+
+static bool is_desired_ep11dev(unsigned int dev_qid,
+			       struct ep11_target_dev_list dev_list)
+{
+	int n;
+
+	for (n = 0; n < dev_list.targets_num; n++, dev_list.targets++) {
+		if ((AP_QID_DEVICE(dev_qid) == dev_list.targets->ap_id) &&
+		    (AP_QID_QUEUE(dev_qid) == dev_list.targets->dom_id)) {
+			return true;
+		}
+	}
+	return false;
+}
+
+static long zcrypt_send_ep11_cprb(struct ep11_urb *xcrb)
+{
+	struct zcrypt_device *zdev;
+	bool autoselect = false;
+	int rc;
+	struct ep11_target_dev_list ep11_dev_list = {
+		.targets_num	=  0x00,
+		.targets	=  NULL,
+	};
+
+	ep11_dev_list.targets_num = (unsigned short) xcrb->targets_num;
+
+	/* empty list indicates autoselect (all available targets) */
+	if (ep11_dev_list.targets_num == 0)
+		autoselect = true;
+	else {
+		ep11_dev_list.targets = kcalloc((unsigned short)
+						xcrb->targets_num,
+						sizeof(struct ep11_target_dev),
+						GFP_KERNEL);
+		if (!ep11_dev_list.targets)
+			return -ENOMEM;
+
+		if (copy_from_user(ep11_dev_list.targets,
+				   (struct ep11_target_dev *)xcrb->targets,
+				   xcrb->targets_num *
+				   sizeof(struct ep11_target_dev)))
+			return -EFAULT;
+	}
+
+	spin_lock_bh(&zcrypt_device_lock);
+	list_for_each_entry(zdev, &zcrypt_device_list, list) {
+		/* check if device is eligible */
+		if (!zdev->online ||
+		    zdev->ops->variant != MSGTYPE06_VARIANT_EP11)
+			continue;
+
+		/* check if device is selected as valid target */
+		if (!is_desired_ep11dev(zdev->ap_dev->qid, ep11_dev_list) &&
+		    !autoselect)
+			continue;
+
+		zcrypt_device_get(zdev);
+		get_device(&zdev->ap_dev->device);
+		zdev->request_count++;
+		__zcrypt_decrease_preference(zdev);
+		if (try_module_get(zdev->ap_dev->drv->driver.owner)) {
+			spin_unlock_bh(&zcrypt_device_lock);
+			rc = zdev->ops->send_ep11_cprb(zdev, xcrb);
+			spin_lock_bh(&zcrypt_device_lock);
+			module_put(zdev->ap_dev->drv->driver.owner);
+		} else {
+			rc = -EAGAIN;
+		  }
+		zdev->request_count--;
+		__zcrypt_increase_preference(zdev);
+		put_device(&zdev->ap_dev->device);
+		zcrypt_device_put(zdev);
+		spin_unlock_bh(&zcrypt_device_lock);
+		return rc;
+	}
+	spin_unlock_bh(&zcrypt_device_lock);
+	return -ENODEV;
+}
+
 static long zcrypt_rng(char *buffer)
 {
 	struct zcrypt_device *zdev;
@@ -784,6 +870,23 @@ static long zcrypt_unlocked_ioctl(struct file *filp, unsigned int cmd,
 			return -EFAULT;
 		return rc;
 	}
+	case ZSENDEP11CPRB: {
+		struct ep11_urb __user *uxcrb = (void __user *)arg;
+		struct ep11_urb xcrb;
+		if (copy_from_user(&xcrb, uxcrb, sizeof(xcrb)))
+			return -EFAULT;
+		do {
+			rc = zcrypt_send_ep11_cprb(&xcrb);
+		} while (rc == -EAGAIN);
+		/* on failure: retry once again after a requested rescan */
+		if ((rc == -ENODEV) && (zcrypt_process_rescan()))
+			do {
+				rc = zcrypt_send_ep11_cprb(&xcrb);
+			} while (rc == -EAGAIN);
+		if (copy_to_user(uxcrb, &xcrb, sizeof(xcrb)))
+			return -EFAULT;
+		return rc;
+	}
 	case Z90STAT_STATUS_MASK: {
 		char status[AP_DEVICES];
 		zcrypt_status_mask(status);
diff --git a/drivers/s390/crypto/zcrypt_api.h b/drivers/s390/crypto/zcrypt_api.h
index 89632919c993..b3d496bfaa7e 100644
--- a/drivers/s390/crypto/zcrypt_api.h
+++ b/drivers/s390/crypto/zcrypt_api.h
@@ -74,6 +74,7 @@ struct ica_z90_status {
 #define ZCRYPT_CEX2A		6
 #define ZCRYPT_CEX3C		7
 #define ZCRYPT_CEX3A		8
+#define ZCRYPT_CEX4	       10
 
 /**
  * Large random numbers are pulled in 4096 byte chunks from the crypto cards
@@ -89,6 +90,7 @@ struct zcrypt_ops {
 	long (*rsa_modexpo_crt)(struct zcrypt_device *,
 				struct ica_rsa_modexpo_crt *);
 	long (*send_cprb)(struct zcrypt_device *, struct ica_xcRB *);
+	long (*send_ep11_cprb)(struct zcrypt_device *, struct ep11_urb *);
 	long (*rng)(struct zcrypt_device *, char *);
 	struct list_head list;		/* zcrypt ops list. */
 	struct module *owner;
diff --git a/drivers/s390/crypto/zcrypt_cex4.c b/drivers/s390/crypto/zcrypt_cex4.c
index ce1226398ac9..569f8b1d86c0 100644
--- a/drivers/s390/crypto/zcrypt_cex4.c
+++ b/drivers/s390/crypto/zcrypt_cex4.c
@@ -30,7 +30,12 @@
 #define CEX4A_MAX_MESSAGE_SIZE	MSGTYPE50_CRB3_MAX_MSG_SIZE
 #define CEX4C_MAX_MESSAGE_SIZE	MSGTYPE06_MAX_MSG_SIZE
 
-#define CEX4_CLEANUP_TIME	(15*HZ)
+/* Waiting time for requests to be processed.
+ * Currently there are some types of request which are not deterministic.
+ * But the maximum time limit managed by the stomper code is set to 60sec.
+ * Hence we have to wait at least that time period.
+ */
+#define CEX4_CLEANUP_TIME	(61*HZ)
 
 static struct ap_device_id zcrypt_cex4_ids[] = {
 	{ AP_DEVICE(AP_DEVICE_TYPE_CEX4)  },
@@ -101,6 +106,19 @@ static int zcrypt_cex4_probe(struct ap_device *ap_dev)
 			zdev->speed_rating = CEX4C_SPEED_RATING;
 			zdev->ops = zcrypt_msgtype_request(MSGTYPE06_NAME,
 							   MSGTYPE06_VARIANT_DEFAULT);
+		} else if (ap_test_bit(&ap_dev->functions, AP_FUNC_EP11)) {
+			zdev = zcrypt_device_alloc(CEX4C_MAX_MESSAGE_SIZE);
+			if (!zdev)
+				return -ENOMEM;
+			zdev->type_string = "CEX4P";
+			zdev->user_space_type = ZCRYPT_CEX4;
+			zdev->min_mod_size = CEX4C_MIN_MOD_SIZE;
+			zdev->max_mod_size = CEX4C_MAX_MOD_SIZE;
+			zdev->max_exp_bit_length = CEX4C_MAX_MOD_SIZE;
+			zdev->short_crt = 0;
+			zdev->speed_rating = CEX4C_SPEED_RATING;
+			zdev->ops = zcrypt_msgtype_request(MSGTYPE06_NAME,
+							MSGTYPE06_VARIANT_EP11);
 		}
 		break;
 	}
diff --git a/drivers/s390/crypto/zcrypt_error.h b/drivers/s390/crypto/zcrypt_error.h
index 0079b6617211..7b23f43c7b08 100644
--- a/drivers/s390/crypto/zcrypt_error.h
+++ b/drivers/s390/crypto/zcrypt_error.h
@@ -106,15 +106,15 @@ static inline int convert_error(struct zcrypt_device *zdev,
 	//   REP88_ERROR_MESSAGE_TYPE		// '20' CEX2A
 		/*
 		 * To sent a message of the wrong type is a bug in the
-		 * device driver. Warn about it, disable the device
+		 * device driver. Send error msg, disable the device
 		 * and then repeat the request.
 		 */
-		WARN_ON(1);
 		atomic_set(&zcrypt_rescan_req, 1);
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
 		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
-			       zdev->ap_dev->qid,
-			       zdev->online, ehdr->reply_code);
+			zdev->ap_dev->qid, zdev->online, ehdr->reply_code);
 		return -EAGAIN;
 	case REP82_ERROR_TRANSPORT_FAIL:
 	case REP82_ERROR_MACHINE_FAILURE:
@@ -122,15 +122,17 @@ static inline int convert_error(struct zcrypt_device *zdev,
 		/* If a card fails disable it and repeat the request. */
 		atomic_set(&zcrypt_rescan_req, 1);
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
 		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
-			       zdev->ap_dev->qid,
-			       zdev->online, ehdr->reply_code);
+			zdev->ap_dev->qid, zdev->online, ehdr->reply_code);
 		return -EAGAIN;
 	default:
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
 		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
-			       zdev->ap_dev->qid,
-			       zdev->online, ehdr->reply_code);
+			zdev->ap_dev->qid, zdev->online, ehdr->reply_code);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 }
diff --git a/drivers/s390/crypto/zcrypt_msgtype50.c b/drivers/s390/crypto/zcrypt_msgtype50.c
index 7c522f338bda..334e282f255b 100644
--- a/drivers/s390/crypto/zcrypt_msgtype50.c
+++ b/drivers/s390/crypto/zcrypt_msgtype50.c
@@ -25,6 +25,9 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define KMSG_COMPONENT "zcrypt"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/init.h>
@@ -332,6 +335,11 @@ static int convert_type80(struct zcrypt_device *zdev,
 	if (t80h->len < sizeof(*t80h) + outputdatalength) {
 		/* The result is too short, the CEX2A card may not do that.. */
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
+			       zdev->ap_dev->qid, zdev->online, t80h->code);
+
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 	if (zdev->user_space_type == ZCRYPT_CEX2A)
@@ -359,6 +367,10 @@ static int convert_response(struct zcrypt_device *zdev,
 				      outputdata, outputdatalength);
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+			       zdev->ap_dev->qid, zdev->online);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 }
diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c
index 7d97fa5a26d0..57bfda1bd71a 100644
--- a/drivers/s390/crypto/zcrypt_msgtype6.c
+++ b/drivers/s390/crypto/zcrypt_msgtype6.c
@@ -25,6 +25,9 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define KMSG_COMPONENT "zcrypt"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
@@ -50,6 +53,7 @@ struct response_type {
 };
 #define PCIXCC_RESPONSE_TYPE_ICA  0
 #define PCIXCC_RESPONSE_TYPE_XCRB 1
+#define PCIXCC_RESPONSE_TYPE_EP11 2
 
 MODULE_AUTHOR("IBM Corporation");
 MODULE_DESCRIPTION("Cryptographic Coprocessor (message type 6), " \
@@ -358,6 +362,91 @@ static int XCRB_msg_to_type6CPRB_msgX(struct zcrypt_device *zdev,
 	return 0;
 }
 
+static int xcrb_msg_to_type6_ep11cprb_msgx(struct zcrypt_device *zdev,
+				       struct ap_message *ap_msg,
+				       struct ep11_urb *xcRB)
+{
+	unsigned int lfmt;
+
+	static struct type6_hdr static_type6_ep11_hdr = {
+		.type		=  0x06,
+		.rqid		= {0x00, 0x01},
+		.function_code	= {0x00, 0x00},
+		.agent_id[0]	=  0x58,	/* {'X'} */
+		.agent_id[1]	=  0x43,	/* {'C'} */
+		.offset1	=  0x00000058,
+	};
+
+	struct {
+		struct type6_hdr hdr;
+		struct ep11_cprb cprbx;
+		unsigned char	pld_tag;	/* fixed value 0x30 */
+		unsigned char	pld_lenfmt;	/* payload length format */
+	} __packed * msg = ap_msg->message;
+
+	struct pld_hdr {
+		unsigned char	func_tag;	/* fixed value 0x4 */
+		unsigned char	func_len;	/* fixed value 0x4 */
+		unsigned int	func_val;	/* function ID	   */
+		unsigned char	dom_tag;	/* fixed value 0x4 */
+		unsigned char	dom_len;	/* fixed value 0x4 */
+		unsigned int	dom_val;	/* domain id	   */
+	} __packed * payload_hdr;
+
+	/* length checks */
+	ap_msg->length = sizeof(struct type6_hdr) + xcRB->req_len;
+	if (CEIL4(xcRB->req_len) > MSGTYPE06_MAX_MSG_SIZE -
+				   (sizeof(struct type6_hdr)))
+		return -EINVAL;
+
+	if (CEIL4(xcRB->resp_len) > MSGTYPE06_MAX_MSG_SIZE -
+				    (sizeof(struct type86_fmt2_msg)))
+		return -EINVAL;
+
+	/* prepare type6 header */
+	msg->hdr = static_type6_ep11_hdr;
+	msg->hdr.ToCardLen1   = xcRB->req_len;
+	msg->hdr.FromCardLen1 = xcRB->resp_len;
+
+	/* Import CPRB data from the ioctl input parameter */
+	if (copy_from_user(&(msg->cprbx.cprb_len),
+			   (char *)xcRB->req, xcRB->req_len)) {
+		return -EFAULT;
+	}
+
+	/*
+	 The target domain field within the cprb body/payload block will be
+	 replaced by the usage domain for non-management commands only.
+	 Therefore we check the first bit of the 'flags' parameter for
+	 management command indication.
+	   0 - non managment command
+	   1 - management command
+	*/
+	if (!((msg->cprbx.flags & 0x80) == 0x80)) {
+		msg->cprbx.target_id = (unsigned int)
+					AP_QID_QUEUE(zdev->ap_dev->qid);
+
+		if ((msg->pld_lenfmt & 0x80) == 0x80) { /*ext.len.fmt 2 or 3*/
+			switch (msg->pld_lenfmt & 0x03) {
+			case 1:
+				lfmt = 2;
+				break;
+			case 2:
+				lfmt = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		} else {
+			lfmt = 1; /* length format #1 */
+		  }
+		payload_hdr = (struct pld_hdr *)((&(msg->pld_lenfmt))+lfmt);
+		payload_hdr->dom_val = (unsigned int)
+					AP_QID_QUEUE(zdev->ap_dev->qid);
+	}
+	return 0;
+}
+
 /**
  * Copy results from a type 86 ICA reply message back to user space.
  *
@@ -377,6 +466,12 @@ struct type86x_reply {
 	char text[0];
 } __packed;
 
+struct type86_ep11_reply {
+	struct type86_hdr hdr;
+	struct type86_fmt2_ext fmt2;
+	struct ep11_cprb cprbx;
+} __packed;
+
 static int convert_type86_ica(struct zcrypt_device *zdev,
 			  struct ap_message *reply,
 			  char __user *outputdata,
@@ -440,6 +535,11 @@ static int convert_type86_ica(struct zcrypt_device *zdev,
 		if (service_rc == 8 && service_rs == 72)
 			return -EINVAL;
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
+			       zdev->ap_dev->qid, zdev->online,
+			       msg->hdr.reply_code);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 	data = msg->text;
@@ -503,6 +603,33 @@ static int convert_type86_xcrb(struct zcrypt_device *zdev,
 	return 0;
 }
 
+/**
+ * Copy results from a type 86 EP11 XCRB reply message back to user space.
+ *
+ * @zdev: crypto device pointer
+ * @reply: reply AP message.
+ * @xcRB: pointer to EP11 user request block
+ *
+ * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error.
+ */
+static int convert_type86_ep11_xcrb(struct zcrypt_device *zdev,
+				    struct ap_message *reply,
+				    struct ep11_urb *xcRB)
+{
+	struct type86_fmt2_msg *msg = reply->message;
+	char *data = reply->message;
+
+	if (xcRB->resp_len < msg->fmt2.count1)
+		return -EINVAL;
+
+	/* Copy response CPRB to user */
+	if (copy_to_user((char *)xcRB->resp,
+			 data + msg->fmt2.offset1, msg->fmt2.count1))
+		return -EFAULT;
+	xcRB->resp_len = msg->fmt2.count1;
+	return 0;
+}
+
 static int convert_type86_rng(struct zcrypt_device *zdev,
 			  struct ap_message *reply,
 			  char *buffer)
@@ -551,6 +678,10 @@ static int convert_response_ica(struct zcrypt_device *zdev,
 		 * response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+			       zdev->ap_dev->qid, zdev->online);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 }
@@ -579,10 +710,40 @@ static int convert_response_xcrb(struct zcrypt_device *zdev,
 	default: /* Unknown response type, this should NEVER EVER happen */
 		xcRB->status = 0x0008044DL; /* HDD_InvalidParm */
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+			       zdev->ap_dev->qid, zdev->online);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 }
 
+static int convert_response_ep11_xcrb(struct zcrypt_device *zdev,
+	struct ap_message *reply, struct ep11_urb *xcRB)
+{
+	struct type86_ep11_reply *msg = reply->message;
+
+	/* Response type byte is the second byte in the response. */
+	switch (((unsigned char *)reply->message)[1]) {
+	case TYPE82_RSP_CODE:
+	case TYPE87_RSP_CODE:
+		return convert_error(zdev, reply);
+	case TYPE86_RSP_CODE:
+		if (msg->hdr.reply_code)
+			return convert_error(zdev, reply);
+		if (msg->cprbx.cprb_ver_id == 0x04)
+			return convert_type86_ep11_xcrb(zdev, reply, xcRB);
+	/* Fall through, no break, incorrect cprb version is an unknown resp.*/
+	default: /* Unknown response type, this should NEVER EVER happen */
+		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+			       zdev->ap_dev->qid, zdev->online);
+		return -EAGAIN; /* repeat the request on a different device. */
+	}
+}
+
 static int convert_response_rng(struct zcrypt_device *zdev,
 				 struct ap_message *reply,
 				 char *data)
@@ -602,6 +763,10 @@ static int convert_response_rng(struct zcrypt_device *zdev,
 		 * response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+			       zdev->ap_dev->qid, zdev->online);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 }
@@ -657,6 +822,51 @@ out:
 	complete(&(resp_type->work));
 }
 
+/**
+ * This function is called from the AP bus code after a crypto request
+ * "msg" has finished with the reply message "reply".
+ * It is called from tasklet context.
+ * @ap_dev: pointer to the AP device
+ * @msg: pointer to the AP message
+ * @reply: pointer to the AP reply message
+ */
+static void zcrypt_msgtype6_receive_ep11(struct ap_device *ap_dev,
+					 struct ap_message *msg,
+					 struct ap_message *reply)
+{
+	static struct error_hdr error_reply = {
+		.type = TYPE82_RSP_CODE,
+		.reply_code = REP82_ERROR_MACHINE_FAILURE,
+	};
+	struct response_type *resp_type =
+		(struct response_type *)msg->private;
+	struct type86_ep11_reply *t86r;
+	int length;
+
+	/* Copy the reply message to the request message buffer. */
+	if (IS_ERR(reply)) {
+		memcpy(msg->message, &error_reply, sizeof(error_reply));
+		goto out;
+	}
+	t86r = reply->message;
+	if (t86r->hdr.type == TYPE86_RSP_CODE &&
+	    t86r->cprbx.cprb_ver_id == 0x04) {
+		switch (resp_type->type) {
+		case PCIXCC_RESPONSE_TYPE_EP11:
+			length = t86r->fmt2.offset1 + t86r->fmt2.count1;
+			length = min(MSGTYPE06_MAX_MSG_SIZE, length);
+			memcpy(msg->message, reply->message, length);
+			break;
+		default:
+			memcpy(msg->message, &error_reply, sizeof(error_reply));
+		}
+	} else {
+		memcpy(msg->message, reply->message, sizeof(error_reply));
+	  }
+out:
+	complete(&(resp_type->work));
+}
+
 static atomic_t zcrypt_step = ATOMIC_INIT(0);
 
 /**
@@ -782,6 +992,46 @@ out_free:
 }
 
 /**
+ * The request distributor calls this function if it picked the CEX4P
+ * device to handle a send_ep11_cprb request.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ *	  CEX4P device to the request distributor
+ * @xcRB: pointer to the ep11 user request block
+ */
+static long zcrypt_msgtype6_send_ep11_cprb(struct zcrypt_device *zdev,
+						struct ep11_urb *xcrb)
+{
+	struct ap_message ap_msg;
+	struct response_type resp_type = {
+		.type = PCIXCC_RESPONSE_TYPE_EP11,
+	};
+	int rc;
+
+	ap_init_message(&ap_msg);
+	ap_msg.message = kmalloc(MSGTYPE06_MAX_MSG_SIZE, GFP_KERNEL);
+	if (!ap_msg.message)
+		return -ENOMEM;
+	ap_msg.receive = zcrypt_msgtype6_receive_ep11;
+	ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+				atomic_inc_return(&zcrypt_step);
+	ap_msg.private = &resp_type;
+	rc = xcrb_msg_to_type6_ep11cprb_msgx(zdev, &ap_msg, xcrb);
+	if (rc)
+		goto out_free;
+	init_completion(&resp_type.work);
+	ap_queue_message(zdev->ap_dev, &ap_msg);
+	rc = wait_for_completion_interruptible(&resp_type.work);
+	if (rc == 0)
+		rc = convert_response_ep11_xcrb(zdev, &ap_msg, xcrb);
+	else /* Signal pending. */
+		ap_cancel_message(zdev->ap_dev, &ap_msg);
+
+out_free:
+	kzfree(ap_msg.message);
+	return rc;
+}
+
+/**
  * The request distributor calls this function if it picked the PCIXCC/CEX2C
  * device to generate random data.
  * @zdev: pointer to zcrypt_device structure that identifies the
@@ -839,10 +1089,19 @@ static struct zcrypt_ops zcrypt_msgtype6_ops = {
 	.rng = zcrypt_msgtype6_rng,
 };
 
+static struct zcrypt_ops zcrypt_msgtype6_ep11_ops = {
+	.owner = THIS_MODULE,
+	.variant = MSGTYPE06_VARIANT_EP11,
+	.rsa_modexpo = NULL,
+	.rsa_modexpo_crt = NULL,
+	.send_ep11_cprb = zcrypt_msgtype6_send_ep11_cprb,
+};
+
 int __init zcrypt_msgtype6_init(void)
 {
 	zcrypt_msgtype_register(&zcrypt_msgtype6_norng_ops);
 	zcrypt_msgtype_register(&zcrypt_msgtype6_ops);
+	zcrypt_msgtype_register(&zcrypt_msgtype6_ep11_ops);
 	return 0;
 }
 
@@ -850,6 +1109,7 @@ void __exit zcrypt_msgtype6_exit(void)
 {
 	zcrypt_msgtype_unregister(&zcrypt_msgtype6_norng_ops);
 	zcrypt_msgtype_unregister(&zcrypt_msgtype6_ops);
+	zcrypt_msgtype_unregister(&zcrypt_msgtype6_ep11_ops);
 }
 
 module_init(zcrypt_msgtype6_init);
diff --git a/drivers/s390/crypto/zcrypt_msgtype6.h b/drivers/s390/crypto/zcrypt_msgtype6.h
index 1e500d3c0735..207247570623 100644
--- a/drivers/s390/crypto/zcrypt_msgtype6.h
+++ b/drivers/s390/crypto/zcrypt_msgtype6.h
@@ -32,6 +32,7 @@
 #define MSGTYPE06_NAME			"zcrypt_msgtype6"
 #define MSGTYPE06_VARIANT_DEFAULT	0
 #define MSGTYPE06_VARIANT_NORNG		1
+#define MSGTYPE06_VARIANT_EP11		2
 
 #define MSGTYPE06_MAX_MSG_SIZE		(12*1024)
 
@@ -99,6 +100,7 @@ struct type86_hdr {
 } __packed;
 
 #define TYPE86_RSP_CODE 0x86
+#define TYPE87_RSP_CODE 0x87
 #define TYPE86_FMT2	0x02
 
 struct type86_fmt2_ext {
diff --git a/drivers/s390/crypto/zcrypt_pcica.c b/drivers/s390/crypto/zcrypt_pcica.c
index f2b71d8df01f..7a743f4c646c 100644
--- a/drivers/s390/crypto/zcrypt_pcica.c
+++ b/drivers/s390/crypto/zcrypt_pcica.c
@@ -24,6 +24,9 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define KMSG_COMPONENT "zcrypt"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/init.h>
@@ -199,6 +202,10 @@ static int convert_type84(struct zcrypt_device *zdev,
 	if (t84h->len < sizeof(*t84h) + outputdatalength) {
 		/* The result is too short, the PCICA card may not do that.. */
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
+			       zdev->ap_dev->qid, zdev->online, t84h->code);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 	BUG_ON(t84h->len > PCICA_MAX_RESPONSE_SIZE);
@@ -223,6 +230,10 @@ static int convert_response(struct zcrypt_device *zdev,
 				      outputdata, outputdatalength);
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+			       zdev->ap_dev->qid, zdev->online);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 }
diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c
index 0d90a4334055..4d14c04b746e 100644
--- a/drivers/s390/crypto/zcrypt_pcicc.c
+++ b/drivers/s390/crypto/zcrypt_pcicc.c
@@ -24,6 +24,9 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define KMSG_COMPONENT "zcrypt"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/gfp.h>
@@ -372,6 +375,11 @@ static int convert_type86(struct zcrypt_device *zdev,
 		if (service_rc == 8 && service_rs == 72)
 			return -EINVAL;
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d",
+			       zdev->ap_dev->qid, zdev->online,
+			       msg->hdr.reply_code);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 	data = msg->text;
@@ -425,6 +433,10 @@ static int convert_response(struct zcrypt_device *zdev,
 		/* no break, incorrect cprb version is an unknown response */
 	default: /* Unknown response type, this should NEVER EVER happen */
 		zdev->online = 0;
+		pr_err("Cryptographic device %x failed and was set offline\n",
+		       zdev->ap_dev->qid);
+		ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail",
+			       zdev->ap_dev->qid, zdev->online);
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
 }