Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 564 insertions, 0 deletions

diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
new file mode 100644
index 000000000000..5d30a3ebfccd
--- /dev/null
+++ b/drivers/sbus/sbus.c
@@ -0,0 +1,564 @@
+/* $Id: sbus.c,v 1.100 2002/01/24 15:36:24 davem Exp $
+ * sbus.c:  SBus support routines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/system.h>
+#include <asm/sbus.h>
+#include <asm/dma.h>
+#include <asm/oplib.h>
+#include <asm/bpp.h>
+#include <asm/irq.h>
+
+struct sbus_bus *sbus_root = NULL;
+
+static struct linux_prom_irqs irqs[PROMINTR_MAX] __initdata = { { 0 } };
+#ifdef CONFIG_SPARC32
+static int interrupts[PROMINTR_MAX] __initdata = { 0 };
+#endif
+
+#ifdef CONFIG_PCI
+extern int pcic_present(void);
+#endif
+
+/* Perhaps when I figure out more about the iommu we'll put a
+ * device registration routine here that probe_sbus() calls to
+ * setup the iommu for each Sbus.
+ */
+
+/* We call this for each SBus device, and fill the structure based
+ * upon the prom device tree.  We return the start of memory after
+ * the things we have allocated.
+ */
+
+/* #define DEBUG_FILL */
+
+static void __init fill_sbus_device(int prom_node, struct sbus_dev *sdev)
+{
+	unsigned long address, base;
+	int len;
+
+	sdev->prom_node = prom_node;
+	prom_getstring(prom_node, "name",
+		       sdev->prom_name, sizeof(sdev->prom_name));
+	address = prom_getint(prom_node, "address");
+	len = prom_getproperty(prom_node, "reg",
+			       (char *) sdev->reg_addrs,
+			       sizeof(sdev->reg_addrs));
+	if (len == -1) {
+		sdev->num_registers = 0;
+		goto no_regs;
+	}
+
+	if (len % sizeof(struct linux_prom_registers)) {
+		prom_printf("fill_sbus_device: proplen for regs of %s "
+			    " was %d, need multiple of %d\n",
+			    sdev->prom_name, len,
+			    (int) sizeof(struct linux_prom_registers));
+		prom_halt();
+	}
+	if (len > (sizeof(struct linux_prom_registers) * PROMREG_MAX)) {
+		prom_printf("fill_sbus_device: Too many register properties "
+			    "for device %s, len=%d\n",
+			    sdev->prom_name, len);
+		prom_halt();
+	}
+	sdev->num_registers = len / sizeof(struct linux_prom_registers);
+	sdev->ranges_applied = 0;
+
+	base = (unsigned long) sdev->reg_addrs[0].phys_addr;
+
+	/* Compute the slot number. */
+	if (base >= SUN_SBUS_BVADDR && sparc_cpu_model == sun4m) {
+		sdev->slot = sbus_dev_slot(base);
+	} else {
+		sdev->slot = sdev->reg_addrs[0].which_io;
+	}
+
+no_regs:
+	len = prom_getproperty(prom_node, "ranges",
+			       (char *)sdev->device_ranges,
+			       sizeof(sdev->device_ranges));
+	if (len == -1) {
+		sdev->num_device_ranges = 0;
+		goto no_ranges;
+	}
+	if (len % sizeof(struct linux_prom_ranges)) {
+		prom_printf("fill_sbus_device: proplen for ranges of %s "
+			    " was %d, need multiple of %d\n",
+			    sdev->prom_name, len,
+			    (int) sizeof(struct linux_prom_ranges));
+		prom_halt();
+	}
+	if (len > (sizeof(struct linux_prom_ranges) * PROMREG_MAX)) {
+		prom_printf("fill_sbus_device: Too many range properties "
+			    "for device %s, len=%d\n",
+			    sdev->prom_name, len);
+		prom_halt();
+	}
+	sdev->num_device_ranges =
+		len / sizeof(struct linux_prom_ranges);
+
+no_ranges:
+	/* XXX Unfortunately, IRQ issues are very arch specific.
+	 * XXX Pull this crud out into an arch specific area
+	 * XXX at some point. -DaveM
+	 */
+#ifdef CONFIG_SPARC64
+	len = prom_getproperty(prom_node, "interrupts",
+			       (char *) irqs, sizeof(irqs));
+	if (len == -1 || len == 0) {
+		sdev->irqs[0] = 0;
+		sdev->num_irqs = 0;
+	} else {
+		unsigned int pri = irqs[0].pri;
+
+		sdev->num_irqs = 1;
+		if (pri < 0x20)
+			pri += sdev->slot * 8;
+
+		sdev->irqs[0] =	sbus_build_irq(sdev->bus, pri);
+	}
+#endif /* CONFIG_SPARC64 */
+
+#ifdef CONFIG_SPARC32
+	len = prom_getproperty(prom_node, "intr",
+			       (char *)irqs, sizeof(irqs));
+	if (len != -1) {
+		sdev->num_irqs = len / 8;
+		if (sdev->num_irqs == 0) {
+			sdev->irqs[0] = 0;
+		} else if (sparc_cpu_model == sun4d) {
+			extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq);
+
+			for (len = 0; len < sdev->num_irqs; len++)
+				sdev->irqs[len] = sun4d_build_irq(sdev, irqs[len].pri);
+		} else {
+			for (len = 0; len < sdev->num_irqs; len++)
+				sdev->irqs[len] = irqs[len].pri;
+		}
+	} else {
+		/* No "intr" node found-- check for "interrupts" node.
+		 * This node contains SBus interrupt levels, not IPLs
+		 * as in "intr", and no vector values.  We convert 
+		 * SBus interrupt levels to PILs (platform specific).
+		 */
+		len = prom_getproperty(prom_node, "interrupts", 
+					(char *)interrupts, sizeof(interrupts));
+		if (len == -1) {
+			sdev->irqs[0] = 0;
+			sdev->num_irqs = 0;
+		} else {
+			sdev->num_irqs = len / sizeof(int);
+			for (len = 0; len < sdev->num_irqs; len++) {
+				sdev->irqs[len] = sbint_to_irq(sdev, interrupts[len]);
+			}
+		}
+	} 
+#endif /* CONFIG_SPARC32 */
+}
+
+/* This routine gets called from whoever needs the sbus first, to scan
+ * the SBus device tree.  Currently it just prints out the devices
+ * found on the bus and builds trees of SBUS structs and attached
+ * devices.
+ */
+
+extern void iommu_init(int iommu_node, struct sbus_bus *sbus);
+extern void iounit_init(int sbi_node, int iounit_node, struct sbus_bus *sbus);
+void sun4_init(void);
+#ifdef CONFIG_SUN_AUXIO
+extern void auxio_probe(void);
+#endif
+
+static void __init sbus_do_child_siblings(int start_node,
+					  struct sbus_dev *child,
+					  struct sbus_dev *parent,
+					  struct sbus_bus *sbus)
+{
+	struct sbus_dev *this_dev = child;
+	int this_node = start_node;
+
+	/* Child already filled in, just need to traverse siblings. */
+	child->child = NULL;
+	child->parent = parent;
+	while((this_node = prom_getsibling(this_node)) != 0) {
+		this_dev->next = kmalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
+		this_dev = this_dev->next;
+		this_dev->next = NULL;
+		this_dev->parent = parent;
+
+		this_dev->bus = sbus;
+		fill_sbus_device(this_node, this_dev);
+
+		if(prom_getchild(this_node)) {
+			this_dev->child = kmalloc(sizeof(struct sbus_dev),
+						  GFP_ATOMIC);
+			this_dev->child->bus = sbus;
+			this_dev->child->next = NULL;
+			fill_sbus_device(prom_getchild(this_node), this_dev->child);
+			sbus_do_child_siblings(prom_getchild(this_node),
+					       this_dev->child, this_dev, sbus);
+		} else {
+			this_dev->child = NULL;
+		}
+	}
+}
+
+/*
+ * XXX This functions appears to be a distorted version of
+ * prom_sbus_ranges_init(), with all sun4d stuff cut away.
+ * Ask DaveM what is going on here, how is sun4d supposed to work... XXX
+ */
+/* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */
+
+static void __init sbus_bus_ranges_init(int parent_node, struct sbus_bus *sbus)
+{
+	int len;
+
+	len = prom_getproperty(sbus->prom_node, "ranges",
+			       (char *) sbus->sbus_ranges,
+			       sizeof(sbus->sbus_ranges));
+	if (len == -1 || len == 0) {
+		sbus->num_sbus_ranges = 0;
+		return;
+	}
+	sbus->num_sbus_ranges = len / sizeof(struct linux_prom_ranges);
+#ifdef CONFIG_SPARC32
+	if (sparc_cpu_model == sun4d) {
+		struct linux_prom_ranges iounit_ranges[PROMREG_MAX];
+		int num_iounit_ranges;
+
+		len = prom_getproperty(parent_node, "ranges",
+				       (char *) iounit_ranges,
+				       sizeof (iounit_ranges));
+		if (len != -1) {
+			num_iounit_ranges = (len/sizeof(struct linux_prom_ranges));
+			prom_adjust_ranges (sbus->sbus_ranges, sbus->num_sbus_ranges, iounit_ranges, num_iounit_ranges);
+		}
+	}
+#endif
+}
+
+static void __init __apply_ranges_to_regs(struct linux_prom_ranges *ranges,
+					  int num_ranges,
+					  struct linux_prom_registers *regs,
+					  int num_regs)
+{
+	if (num_ranges) {
+		int regnum;
+
+		for (regnum = 0; regnum < num_regs; regnum++) {
+			int rngnum;
+
+			for (rngnum = 0; rngnum < num_ranges; rngnum++) {
+				if (regs[regnum].which_io == ranges[rngnum].ot_child_space)
+					break;
+			}
+			if (rngnum == num_ranges) {
+				/* We used to flag this as an error.  Actually
+				 * some devices do not report the regs as we expect.
+				 * For example, see SUNW,pln device.  In that case
+				 * the reg property is in a format internal to that
+				 * node, ie. it is not in the SBUS register space
+				 * per se. -DaveM
+				 */
+				return;
+			}
+			regs[regnum].which_io = ranges[rngnum].ot_parent_space;
+			regs[regnum].phys_addr -= ranges[rngnum].ot_child_base;
+			regs[regnum].phys_addr += ranges[rngnum].ot_parent_base;
+		}
+	}
+}
+
+static void __init __fixup_regs_sdev(struct sbus_dev *sdev)
+{
+	if (sdev->num_registers != 0) {
+		struct sbus_dev *parent = sdev->parent;
+		int i;
+
+		while (parent != NULL) {
+			__apply_ranges_to_regs(parent->device_ranges,
+					       parent->num_device_ranges,
+					       sdev->reg_addrs,
+					       sdev->num_registers);
+
+			parent = parent->parent;
+		}
+
+		__apply_ranges_to_regs(sdev->bus->sbus_ranges,
+				       sdev->bus->num_sbus_ranges,
+				       sdev->reg_addrs,
+				       sdev->num_registers);
+
+		for (i = 0; i < sdev->num_registers; i++) {
+			struct resource *res = &sdev->resource[i];
+
+			res->start = sdev->reg_addrs[i].phys_addr;
+			res->end = (res->start +
+				    (unsigned long)sdev->reg_addrs[i].reg_size - 1UL);
+			res->flags = IORESOURCE_IO |
+				(sdev->reg_addrs[i].which_io & 0xff);
+		}
+	}
+}
+
+static void __init sbus_fixup_all_regs(struct sbus_dev *first_sdev)
+{
+	struct sbus_dev *sdev;
+
+	for (sdev = first_sdev; sdev; sdev = sdev->next) {
+		if (sdev->child)
+			sbus_fixup_all_regs(sdev->child);
+		__fixup_regs_sdev(sdev);
+	}
+}
+
+extern void register_proc_sparc_ioport(void);
+extern void firetruck_init(void);
+
+#ifdef CONFIG_SUN4
+extern void sun4_dvma_init(void);
+#endif
+
+static int __init sbus_init(void)
+{
+	int nd, this_sbus, sbus_devs, topnd, iommund;
+	unsigned int sbus_clock;
+	struct sbus_bus *sbus;
+	struct sbus_dev *this_dev;
+	int num_sbus = 0;  /* How many did we find? */
+
+#ifdef CONFIG_SPARC32
+	register_proc_sparc_ioport();
+#endif
+
+#ifdef CONFIG_SUN4
+	sun4_dvma_init();
+	return 0;
+#endif
+
+	topnd = prom_getchild(prom_root_node);
+	
+	/* Finding the first sbus is a special case... */
+	iommund = 0;
+	if(sparc_cpu_model == sun4u) {
+		nd = prom_searchsiblings(topnd, "sbus");
+		if(nd == 0) {
+#ifdef CONFIG_PCI
+			if (!pcic_present()) {
+				prom_printf("Neither SBUS nor PCI found.\n");
+				prom_halt();
+			} else {
+#ifdef CONFIG_SPARC64
+				firetruck_init();
+#endif
+			}
+			return 0;
+#else
+			prom_printf("YEEE, UltraSparc sbus not found\n");
+			prom_halt();
+#endif
+		}
+	} else if(sparc_cpu_model == sun4d) {
+		if((iommund = prom_searchsiblings(topnd, "io-unit")) == 0 ||
+		   (nd = prom_getchild(iommund)) == 0 ||
+		   (nd = prom_searchsiblings(nd, "sbi")) == 0) {
+		   	panic("sbi not found");
+		}
+	} else if((nd = prom_searchsiblings(topnd, "sbus")) == 0) {
+		if((iommund = prom_searchsiblings(topnd, "iommu")) == 0 ||
+		   (nd = prom_getchild(iommund)) == 0 ||
+		   (nd = prom_searchsiblings(nd, "sbus")) == 0) {
+#ifdef CONFIG_PCI
+                        if (!pcic_present()) {
+                                prom_printf("Neither SBUS nor PCI found.\n");
+                                prom_halt();
+                        }
+                        return 0;
+#else
+			/* No reason to run further - the data access trap will occur. */
+			panic("sbus not found");
+#endif
+		}
+	}
+
+	/* Ok, we've found the first one, allocate first SBus struct
+	 * and place in chain.
+	 */
+	sbus = sbus_root = kmalloc(sizeof(struct sbus_bus), GFP_ATOMIC);
+	sbus->next = NULL;
+	sbus->prom_node = nd;
+	this_sbus = nd;
+
+	if(iommund && sparc_cpu_model != sun4u && sparc_cpu_model != sun4d)
+		iommu_init(iommund, sbus);
+
+	/* Loop until we find no more SBUS's */
+	while(this_sbus) {
+#ifdef CONFIG_SPARC64
+		/* IOMMU hides inside SBUS/SYSIO prom node on Ultra. */
+		if(sparc_cpu_model == sun4u) {
+			extern void sbus_iommu_init(int prom_node, struct sbus_bus *sbus);
+
+			sbus_iommu_init(this_sbus, sbus);
+		}
+#endif /* CONFIG_SPARC64 */
+
+#ifdef CONFIG_SPARC32
+		if (sparc_cpu_model == sun4d)
+			iounit_init(this_sbus, iommund, sbus);
+#endif /* CONFIG_SPARC32 */
+		printk("sbus%d: ", num_sbus);
+		sbus_clock = prom_getint(this_sbus, "clock-frequency");
+		if(sbus_clock == -1)
+			sbus_clock = (25*1000*1000);
+		printk("Clock %d.%d MHz\n", (int) ((sbus_clock/1000)/1000),
+		       (int) (((sbus_clock/1000)%1000 != 0) ? 
+			      (((sbus_clock/1000)%1000) + 1000) : 0));
+
+		prom_getstring(this_sbus, "name",
+			       sbus->prom_name, sizeof(sbus->prom_name));
+		sbus->clock_freq = sbus_clock;
+#ifdef CONFIG_SPARC32
+		if (sparc_cpu_model == sun4d) {
+			sbus->devid = prom_getint(iommund, "device-id");
+			sbus->board = prom_getint(iommund, "board#");
+		}
+#endif
+		
+		sbus_bus_ranges_init(iommund, sbus);
+
+		sbus_devs = prom_getchild(this_sbus);
+		if (!sbus_devs) {
+			sbus->devices = NULL;
+			goto next_bus;
+		}
+
+		sbus->devices = kmalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
+
+		this_dev = sbus->devices;
+		this_dev->next = NULL;
+
+		this_dev->bus = sbus;
+		this_dev->parent = NULL;
+		fill_sbus_device(sbus_devs, this_dev);
+
+		/* Should we traverse for children? */
+		if(prom_getchild(sbus_devs)) {
+			/* Allocate device node */
+			this_dev->child = kmalloc(sizeof(struct sbus_dev),
+						  GFP_ATOMIC);
+			/* Fill it */
+			this_dev->child->bus = sbus;
+			this_dev->child->next = NULL;
+			fill_sbus_device(prom_getchild(sbus_devs),
+					 this_dev->child);
+			sbus_do_child_siblings(prom_getchild(sbus_devs),
+					       this_dev->child,
+					       this_dev,
+					       sbus);
+		} else {
+			this_dev->child = NULL;
+		}
+
+		while((sbus_devs = prom_getsibling(sbus_devs)) != 0) {
+			/* Allocate device node */
+			this_dev->next = kmalloc(sizeof(struct sbus_dev),
+						 GFP_ATOMIC);
+			this_dev = this_dev->next;
+			this_dev->next = NULL;
+
+			/* Fill it */
+			this_dev->bus = sbus;
+			this_dev->parent = NULL;
+			fill_sbus_device(sbus_devs, this_dev);
+
+			/* Is there a child node hanging off of us? */
+			if(prom_getchild(sbus_devs)) {
+				/* Get new device struct */
+				this_dev->child = kmalloc(sizeof(struct sbus_dev),
+							  GFP_ATOMIC);
+				/* Fill it */
+				this_dev->child->bus = sbus;
+				this_dev->child->next = NULL;
+				fill_sbus_device(prom_getchild(sbus_devs),
+						 this_dev->child);
+				sbus_do_child_siblings(prom_getchild(sbus_devs),
+						       this_dev->child,
+						       this_dev,
+						       sbus);
+			} else {
+				this_dev->child = NULL;
+			}
+		}
+
+		/* Walk all devices and apply parent ranges. */
+		sbus_fixup_all_regs(sbus->devices);
+
+		dvma_init(sbus);
+	next_bus:
+		num_sbus++;
+		if(sparc_cpu_model == sun4u) {
+			this_sbus = prom_getsibling(this_sbus);
+			if(!this_sbus)
+				break;
+			this_sbus = prom_searchsiblings(this_sbus, "sbus");
+		} else if(sparc_cpu_model == sun4d) {
+			iommund = prom_getsibling(iommund);
+			if(!iommund)
+				break;
+			iommund = prom_searchsiblings(iommund, "io-unit");
+			if(!iommund)
+				break;
+			this_sbus = prom_searchsiblings(prom_getchild(iommund), "sbi");
+		} else {
+			this_sbus = prom_getsibling(this_sbus);
+			if(!this_sbus)
+				break;
+			this_sbus = prom_searchsiblings(this_sbus, "sbus");
+		}
+		if(this_sbus) {
+			sbus->next = kmalloc(sizeof(struct sbus_bus), GFP_ATOMIC);
+			sbus = sbus->next;
+			sbus->next = NULL;
+			sbus->prom_node = this_sbus;
+		} else {
+			break;
+		}
+	} /* while(this_sbus) */
+
+	if (sparc_cpu_model == sun4d) {
+		extern void sun4d_init_sbi_irq(void);
+		sun4d_init_sbi_irq();
+	}
+	
+#ifdef CONFIG_SPARC64
+	if (sparc_cpu_model == sun4u) {
+		firetruck_init();
+	}
+#endif
+#ifdef CONFIG_SUN_AUXIO
+	if (sparc_cpu_model == sun4u)
+		auxio_probe ();
+#endif
+#ifdef CONFIG_SPARC64
+	if (sparc_cpu_model == sun4u) {
+		extern void clock_probe(void);
+
+		clock_probe();
+	}
+#endif
+
+	return 0;
+}
+
+subsys_initcall(sbus_init);