diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 00:20:36 +0200 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 00:20:36 +0200 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/3w-9xxx.h | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/3w-9xxx.h')
-rw-r--r-- | drivers/scsi/3w-9xxx.h | 682 |
1 files changed, 682 insertions, 0 deletions
diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h new file mode 100644 index 000000000000..8c8ecbed3b58 --- /dev/null +++ b/drivers/scsi/3w-9xxx.h @@ -0,0 +1,682 @@ +/* + 3w-9xxx.h -- 3ware 9000 Storage Controller device driver for Linux. + + Written By: Adam Radford <linuxraid@amcc.com> + + Copyright (C) 2004-2005 Applied Micro Circuits Corporation. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + Bugs/Comments/Suggestions should be mailed to: + linuxraid@amcc.com + + For more information, goto: + http://www.amcc.com +*/ + +#ifndef _3W_9XXX_H +#define _3W_9XXX_H + +/* AEN string type */ +typedef struct TAG_twa_message_type { + unsigned int code; + char* text; +} twa_message_type; + +/* AEN strings */ +static twa_message_type twa_aen_table[] = { + {0x0000, "AEN queue empty"}, + {0x0001, "Controller reset occurred"}, + {0x0002, "Degraded unit detected"}, + {0x0003, "Controller error occured"}, + {0x0004, "Background rebuild failed"}, + {0x0005, "Background rebuild done"}, + {0x0006, "Incomplete unit detected"}, + {0x0007, "Background initialize done"}, + {0x0008, "Unclean shutdown detected"}, + {0x0009, "Drive timeout detected"}, + {0x000A, "Drive error detected"}, + {0x000B, "Rebuild started"}, + {0x000C, "Background initialize started"}, + {0x000D, "Entire logical unit was deleted"}, + {0x000E, "Background initialize failed"}, + {0x000F, "SMART attribute exceeded threshold"}, + {0x0010, "Power supply reported AC under range"}, + {0x0011, "Power supply reported DC out of range"}, + {0x0012, "Power supply reported a malfunction"}, + {0x0013, "Power supply predicted malfunction"}, + {0x0014, "Battery charge is below threshold"}, + {0x0015, "Fan speed is below threshold"}, + {0x0016, "Temperature sensor is above threshold"}, + {0x0017, "Power supply was removed"}, + {0x0018, "Power supply was inserted"}, + {0x0019, "Drive was removed from a bay"}, + {0x001A, "Drive was inserted into a bay"}, + {0x001B, "Drive bay cover door was opened"}, + {0x001C, "Drive bay cover door was closed"}, + {0x001D, "Product case was opened"}, + {0x0020, "Prepare for shutdown (power-off)"}, + {0x0021, "Downgrade UDMA mode to lower speed"}, + {0x0022, "Upgrade UDMA mode to higher speed"}, + {0x0023, "Sector repair completed"}, + {0x0024, "Sbuf memory test failed"}, + {0x0025, "Error flushing cached write data to array"}, + {0x0026, "Drive reported data ECC error"}, + {0x0027, "DCB has checksum error"}, + {0x0028, "DCB version is unsupported"}, + {0x0029, "Background verify started"}, + {0x002A, "Background verify failed"}, + {0x002B, "Background verify done"}, + {0x002C, "Bad sector overwritten during rebuild"}, + {0x002D, "Background rebuild error on source drive"}, + {0x002E, "Replace failed because replacement drive too small"}, + {0x002F, "Verify failed because array was never initialized"}, + {0x0030, "Unsupported ATA drive"}, + {0x0031, "Synchronize host/controller time"}, + {0x0032, "Spare capacity is inadequate for some units"}, + {0x0033, "Background migration started"}, + {0x0034, "Background migration failed"}, + {0x0035, "Background migration done"}, + {0x0036, "Verify detected and fixed data/parity mismatch"}, + {0x0037, "SO-DIMM incompatible"}, + {0x0038, "SO-DIMM not detected"}, + {0x0039, "Corrected Sbuf ECC error"}, + {0x003A, "Drive power on reset detected"}, + {0x003B, "Background rebuild paused"}, + {0x003C, "Background initialize paused"}, + {0x003D, "Background verify paused"}, + {0x003E, "Background migration paused"}, + {0x003F, "Corrupt flash file system detected"}, + {0x0040, "Flash file system repaired"}, + {0x0041, "Unit number assignments were lost"}, + {0x0042, "Error during read of primary DCB"}, + {0x0043, "Latent error found in backup DCB"}, + {0x00FC, "Recovered/finished array membership update"}, + {0x00FD, "Handler lockup"}, + {0x00FE, "Retrying PCI transfer"}, + {0x00FF, "AEN queue is full"}, + {0xFFFFFFFF, (char*) 0} +}; + +/* AEN severity table */ +static char *twa_aen_severity_table[] = +{ + "None", "ERROR", "WARNING", "INFO", "DEBUG", (char*) 0 +}; + +/* Error strings */ +static twa_message_type twa_error_table[] = { + {0x0100, "SGL entry contains zero data"}, + {0x0101, "Invalid command opcode"}, + {0x0102, "SGL entry has unaligned address"}, + {0x0103, "SGL size does not match command"}, + {0x0104, "SGL entry has illegal length"}, + {0x0105, "Command packet is not aligned"}, + {0x0106, "Invalid request ID"}, + {0x0107, "Duplicate request ID"}, + {0x0108, "ID not locked"}, + {0x0109, "LBA out of range"}, + {0x010A, "Logical unit not supported"}, + {0x010B, "Parameter table does not exist"}, + {0x010C, "Parameter index does not exist"}, + {0x010D, "Invalid field in CDB"}, + {0x010E, "Specified port has invalid drive"}, + {0x010F, "Parameter item size mismatch"}, + {0x0110, "Failed memory allocation"}, + {0x0111, "Memory request too large"}, + {0x0112, "Out of memory segments"}, + {0x0113, "Invalid address to deallocate"}, + {0x0114, "Out of memory"}, + {0x0115, "Out of heap"}, + {0x0120, "Double degrade"}, + {0x0121, "Drive not degraded"}, + {0x0122, "Reconstruct error"}, + {0x0123, "Replace not accepted"}, + {0x0124, "Replace drive capacity too small"}, + {0x0125, "Sector count not allowed"}, + {0x0126, "No spares left"}, + {0x0127, "Reconstruct error"}, + {0x0128, "Unit is offline"}, + {0x0129, "Cannot update status to DCB"}, + {0x0130, "Invalid stripe handle"}, + {0x0131, "Handle that was not locked"}, + {0x0132, "Handle that was not empty"}, + {0x0133, "Handle has different owner"}, + {0x0140, "IPR has parent"}, + {0x0150, "Illegal Pbuf address alignment"}, + {0x0151, "Illegal Pbuf transfer length"}, + {0x0152, "Illegal Sbuf address alignment"}, + {0x0153, "Illegal Sbuf transfer length"}, + {0x0160, "Command packet too large"}, + {0x0161, "SGL exceeds maximum length"}, + {0x0162, "SGL has too many entries"}, + {0x0170, "Insufficient resources for rebuilder"}, + {0x0171, "Verify error (data != parity)"}, + {0x0180, "Requested segment not in directory of this DCB"}, + {0x0181, "DCB segment has unsupported version"}, + {0x0182, "DCB segment has checksum error"}, + {0x0183, "DCB support (settings) segment invalid"}, + {0x0184, "DCB UDB (unit descriptor block) segment invalid"}, + {0x0185, "DCB GUID (globally unique identifier) segment invalid"}, + {0x01A0, "Could not clear Sbuf"}, + {0x01C0, "Flash identify failed"}, + {0x01C1, "Flash out of bounds"}, + {0x01C2, "Flash verify error"}, + {0x01C3, "Flash file object not found"}, + {0x01C4, "Flash file already present"}, + {0x01C5, "Flash file system full"}, + {0x01C6, "Flash file not present"}, + {0x01C7, "Flash file size error"}, + {0x01C8, "Bad flash file checksum"}, + {0x01CA, "Corrupt flash file system detected"}, + {0x01D0, "Invalid field in parameter list"}, + {0x01D1, "Parameter list length error"}, + {0x01D2, "Parameter item is not changeable"}, + {0x01D3, "Parameter item is not saveable"}, + {0x0200, "UDMA CRC error"}, + {0x0201, "Internal CRC error"}, + {0x0202, "Data ECC error"}, + {0x0203, "ADP level 1 error"}, + {0x0204, "Port timeout"}, + {0x0205, "Drive power on reset"}, + {0x0206, "ADP level 2 error"}, + {0x0207, "Soft reset failed"}, + {0x0208, "Drive not ready"}, + {0x0209, "Unclassified port error"}, + {0x020A, "Drive aborted command"}, + {0x0210, "Internal CRC error"}, + {0x0211, "PCI abort error"}, + {0x0212, "PCI parity error"}, + {0x0213, "Port handler error"}, + {0x0214, "Token interrupt count error"}, + {0x0215, "Timeout waiting for PCI transfer"}, + {0x0216, "Corrected buffer ECC"}, + {0x0217, "Uncorrected buffer ECC"}, + {0x0230, "Unsupported command during flash recovery"}, + {0x0231, "Next image buffer expected"}, + {0x0232, "Binary image architecture incompatible"}, + {0x0233, "Binary image has no signature"}, + {0x0234, "Binary image has bad checksum"}, + {0x0235, "Image downloaded overflowed buffer"}, + {0x0240, "I2C device not found"}, + {0x0241, "I2C transaction aborted"}, + {0x0242, "SO-DIMM parameter(s) incompatible using defaults"}, + {0x0243, "SO-DIMM unsupported"}, + {0x0248, "SPI transfer status error"}, + {0x0249, "SPI transfer timeout error"}, + {0x0250, "Invalid unit descriptor size in CreateUnit"}, + {0x0251, "Unit descriptor size exceeds data buffer in CreateUnit"}, + {0x0252, "Invalid value in CreateUnit descriptor"}, + {0x0253, "Inadequate disk space to support descriptor in CreateUnit"}, + {0x0254, "Unable to create data channel for this unit descriptor"}, + {0x0255, "CreateUnit descriptor specifies a drive already in use"}, + {0x0256, "Unable to write configuration to all disks during CreateUnit"}, + {0x0257, "CreateUnit does not support this descriptor version"}, + {0x0258, "Invalid subunit for RAID 0 or 5 in CreateUnit"}, + {0x0259, "Too many descriptors in CreateUnit"}, + {0x025A, "Invalid configuration specified in CreateUnit descriptor"}, + {0x025B, "Invalid LBA offset specified in CreateUnit descriptor"}, + {0x025C, "Invalid stripelet size specified in CreateUnit descriptor"}, + {0x0260, "SMART attribute exceeded threshold"}, + {0xFFFFFFFF, (char*) 0} +}; + +/* Control register bit definitions */ +#define TW_CONTROL_CLEAR_HOST_INTERRUPT 0x00080000 +#define TW_CONTROL_CLEAR_ATTENTION_INTERRUPT 0x00040000 +#define TW_CONTROL_MASK_COMMAND_INTERRUPT 0x00020000 +#define TW_CONTROL_MASK_RESPONSE_INTERRUPT 0x00010000 +#define TW_CONTROL_UNMASK_COMMAND_INTERRUPT 0x00008000 +#define TW_CONTROL_UNMASK_RESPONSE_INTERRUPT 0x00004000 +#define TW_CONTROL_CLEAR_ERROR_STATUS 0x00000200 +#define TW_CONTROL_ISSUE_SOFT_RESET 0x00000100 +#define TW_CONTROL_ENABLE_INTERRUPTS 0x00000080 +#define TW_CONTROL_DISABLE_INTERRUPTS 0x00000040 +#define TW_CONTROL_ISSUE_HOST_INTERRUPT 0x00000020 +#define TW_CONTROL_CLEAR_PARITY_ERROR 0x00800000 +#define TW_CONTROL_CLEAR_QUEUE_ERROR 0x00400000 +#define TW_CONTROL_CLEAR_PCI_ABORT 0x00100000 +#define TW_CONTROL_CLEAR_SBUF_WRITE_ERROR 0x00000008 + +/* Status register bit definitions */ +#define TW_STATUS_MAJOR_VERSION_MASK 0xF0000000 +#define TW_STATUS_MINOR_VERSION_MASK 0x0F000000 +#define TW_STATUS_PCI_PARITY_ERROR 0x00800000 +#define TW_STATUS_QUEUE_ERROR 0x00400000 +#define TW_STATUS_MICROCONTROLLER_ERROR 0x00200000 +#define TW_STATUS_PCI_ABORT 0x00100000 +#define TW_STATUS_HOST_INTERRUPT 0x00080000 +#define TW_STATUS_ATTENTION_INTERRUPT 0x00040000 +#define TW_STATUS_COMMAND_INTERRUPT 0x00020000 +#define TW_STATUS_RESPONSE_INTERRUPT 0x00010000 +#define TW_STATUS_COMMAND_QUEUE_FULL 0x00008000 +#define TW_STATUS_RESPONSE_QUEUE_EMPTY 0x00004000 +#define TW_STATUS_MICROCONTROLLER_READY 0x00002000 +#define TW_STATUS_COMMAND_QUEUE_EMPTY 0x00001000 +#define TW_STATUS_EXPECTED_BITS 0x00002000 +#define TW_STATUS_UNEXPECTED_BITS 0x00F00008 +#define TW_STATUS_SBUF_WRITE_ERROR 0x00000008 +#define TW_STATUS_VALID_INTERRUPT 0x00DF0008 + +/* RESPONSE QUEUE BIT DEFINITIONS */ +#define TW_RESPONSE_ID_MASK 0x00000FF0 + +/* PCI related defines */ +#define TW_NUMDEVICES 1 +#define TW_PCI_CLEAR_PARITY_ERRORS 0xc100 +#define TW_PCI_CLEAR_PCI_ABORT 0x2000 + +/* Command packet opcodes used by the driver */ +#define TW_OP_INIT_CONNECTION 0x1 +#define TW_OP_GET_PARAM 0x12 +#define TW_OP_SET_PARAM 0x13 +#define TW_OP_EXECUTE_SCSI 0x10 +#define TW_OP_DOWNLOAD_FIRMWARE 0x16 +#define TW_OP_RESET 0x1C + +/* Asynchronous Event Notification (AEN) codes used by the driver */ +#define TW_AEN_QUEUE_EMPTY 0x0000 +#define TW_AEN_SOFT_RESET 0x0001 +#define TW_AEN_SYNC_TIME_WITH_HOST 0x031 +#define TW_AEN_SEVERITY_ERROR 0x1 +#define TW_AEN_SEVERITY_DEBUG 0x4 +#define TW_AEN_NOT_RETRIEVED 0x1 +#define TW_AEN_RETRIEVED 0x2 + +/* Command state defines */ +#define TW_S_INITIAL 0x1 /* Initial state */ +#define TW_S_STARTED 0x2 /* Id in use */ +#define TW_S_POSTED 0x4 /* Posted to the controller */ +#define TW_S_PENDING 0x8 /* Waiting to be posted in isr */ +#define TW_S_COMPLETED 0x10 /* Completed by isr */ +#define TW_S_FINISHED 0x20 /* I/O completely done */ + +/* Compatibility defines */ +#define TW_9000_ARCH_ID 0x5 +#define TW_CURRENT_DRIVER_SRL 28 +#define TW_CURRENT_DRIVER_BUILD 9 +#define TW_CURRENT_DRIVER_BRANCH 4 + +/* Phase defines */ +#define TW_PHASE_INITIAL 0 +#define TW_PHASE_SINGLE 1 +#define TW_PHASE_SGLIST 2 + +/* Misc defines */ +#define TW_SECTOR_SIZE 512 +#define TW_ALIGNMENT_9000 4 /* 4 bytes */ +#define TW_ALIGNMENT_9000_SGL 0x3 +#define TW_MAX_UNITS 16 +#define TW_INIT_MESSAGE_CREDITS 0x100 +#define TW_INIT_COMMAND_PACKET_SIZE 0x3 +#define TW_INIT_COMMAND_PACKET_SIZE_EXTENDED 0x6 +#define TW_EXTENDED_INIT_CONNECT 0x2 +#define TW_BUNDLED_FW_SAFE_TO_FLASH 0x4 +#define TW_CTLR_FW_RECOMMENDS_FLASH 0x8 +#define TW_CTLR_FW_COMPATIBLE 0x2 +#define TW_BASE_FW_SRL 24 +#define TW_BASE_FW_BRANCH 0 +#define TW_BASE_FW_BUILD 1 +#define TW_FW_SRL_LUNS_SUPPORTED 28 +#define TW_Q_LENGTH 256 +#define TW_Q_START 0 +#define TW_MAX_SLOT 32 +#define TW_MAX_RESET_TRIES 2 +#define TW_MAX_CMDS_PER_LUN 254 +#define TW_MAX_RESPONSE_DRAIN 256 +#define TW_MAX_AEN_DRAIN 40 +#define TW_IN_RESET 2 +#define TW_IN_CHRDEV_IOCTL 3 +#define TW_IN_ATTENTION_LOOP 4 +#define TW_MAX_SECTORS 256 +#define TW_AEN_WAIT_TIME 1000 +#define TW_IOCTL_WAIT_TIME (1 * HZ) /* 1 second */ +#define TW_MAX_CDB_LEN 16 +#define TW_ISR_DONT_COMPLETE 2 +#define TW_ISR_DONT_RESULT 3 +#define TW_IOCTL_CHRDEV_TIMEOUT 60 /* 60 seconds */ +#define TW_IOCTL_CHRDEV_FREE -1 +#define TW_COMMAND_OFFSET 128 /* 128 bytes */ +#define TW_VERSION_TABLE 0x0402 +#define TW_TIMEKEEP_TABLE 0x040A +#define TW_INFORMATION_TABLE 0x0403 +#define TW_PARAM_FWVER 3 +#define TW_PARAM_FWVER_LENGTH 16 +#define TW_PARAM_BIOSVER 4 +#define TW_PARAM_BIOSVER_LENGTH 16 +#define TW_PARAM_PORTCOUNT 3 +#define TW_PARAM_PORTCOUNT_LENGTH 1 +#define TW_MIN_SGL_LENGTH 0x200 /* 512 bytes */ +#define TW_MAX_SENSE_LENGTH 256 +#define TW_EVENT_SOURCE_AEN 0x1000 +#define TW_EVENT_SOURCE_COMMAND 0x1001 +#define TW_EVENT_SOURCE_PCHIP 0x1002 +#define TW_EVENT_SOURCE_DRIVER 0x1003 +#define TW_IOCTL_GET_COMPATIBILITY_INFO 0x101 +#define TW_IOCTL_GET_LAST_EVENT 0x102 +#define TW_IOCTL_GET_FIRST_EVENT 0x103 +#define TW_IOCTL_GET_NEXT_EVENT 0x104 +#define TW_IOCTL_GET_PREVIOUS_EVENT 0x105 +#define TW_IOCTL_GET_LOCK 0x106 +#define TW_IOCTL_RELEASE_LOCK 0x107 +#define TW_IOCTL_FIRMWARE_PASS_THROUGH 0x108 +#define TW_IOCTL_ERROR_STATUS_NOT_LOCKED 0x1001 // Not locked +#define TW_IOCTL_ERROR_STATUS_LOCKED 0x1002 // Already locked +#define TW_IOCTL_ERROR_STATUS_NO_MORE_EVENTS 0x1003 // No more events +#define TW_IOCTL_ERROR_STATUS_AEN_CLOBBER 0x1004 // AEN clobber occurred +#define TW_IOCTL_ERROR_OS_EFAULT -EFAULT // Bad address +#define TW_IOCTL_ERROR_OS_EINTR -EINTR // Interrupted system call +#define TW_IOCTL_ERROR_OS_EINVAL -EINVAL // Invalid argument +#define TW_IOCTL_ERROR_OS_ENOMEM -ENOMEM // Out of memory +#define TW_IOCTL_ERROR_OS_ERESTARTSYS -ERESTARTSYS // Restart system call +#define TW_IOCTL_ERROR_OS_EIO -EIO // I/O error +#define TW_IOCTL_ERROR_OS_ENOTTY -ENOTTY // Not a typewriter +#define TW_IOCTL_ERROR_OS_ENODEV -ENODEV // No such device +#define TW_ALLOCATION_LENGTH 128 +#define TW_SENSE_DATA_LENGTH 18 +#define TW_STATUS_CHECK_CONDITION 2 +#define TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED 0x10a +#define TW_ERROR_UNIT_OFFLINE 0x128 +#define TW_MESSAGE_SOURCE_CONTROLLER_ERROR 3 +#define TW_MESSAGE_SOURCE_CONTROLLER_EVENT 4 +#define TW_MESSAGE_SOURCE_LINUX_DRIVER 6 +#define TW_DRIVER TW_MESSAGE_SOURCE_LINUX_DRIVER +#define TW_MESSAGE_SOURCE_LINUX_OS 9 +#define TW_OS TW_MESSAGE_SOURCE_LINUX_OS +#ifndef PCI_DEVICE_ID_3WARE_9000 +#define PCI_DEVICE_ID_3WARE_9000 0x1002 +#endif + +/* Bitmask macros to eliminate bitfields */ + +/* opcode: 5, reserved: 3 */ +#define TW_OPRES_IN(x,y) ((x << 5) | (y & 0x1f)) +#define TW_OP_OUT(x) (x & 0x1f) + +/* opcode: 5, sgloffset: 3 */ +#define TW_OPSGL_IN(x,y) ((x << 5) | (y & 0x1f)) +#define TW_SGL_OUT(x) ((x >> 5) & 0x7) + +/* severity: 3, reserved: 5 */ +#define TW_SEV_OUT(x) (x & 0x7) + +/* reserved_1: 4, response_id: 8, reserved_2: 20 */ +#define TW_RESID_OUT(x) ((x >> 4) & 0xff) + +/* request_id: 12, lun: 4 */ +#define TW_REQ_LUN_IN(lun, request_id) (((lun << 12) & 0xf000) | (request_id & 0xfff)) +#define TW_LUN_OUT(lun) ((lun >> 12) & 0xf) + +/* Macros */ +#define TW_CONTROL_REG_ADDR(x) (x->base_addr) +#define TW_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0x4) +#define TW_COMMAND_QUEUE_REG_ADDR(x) (sizeof(dma_addr_t) > 4 ? ((unsigned char __iomem *)x->base_addr + 0x20) : ((unsigned char __iomem *)x->base_addr + 0x8)) +#define TW_RESPONSE_QUEUE_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0xC) +#define TW_CLEAR_ALL_INTERRUPTS(x) (writel(TW_STATUS_VALID_INTERRUPT, TW_CONTROL_REG_ADDR(x))) +#define TW_CLEAR_ATTENTION_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_ATTENTION_INTERRUPT, TW_CONTROL_REG_ADDR(x))) +#define TW_CLEAR_HOST_INTERRUPT(x) (writel(TW_CONTROL_CLEAR_HOST_INTERRUPT, TW_CONTROL_REG_ADDR(x))) +#define TW_DISABLE_INTERRUPTS(x) (writel(TW_CONTROL_DISABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x))) +#define TW_ENABLE_AND_CLEAR_INTERRUPTS(x) (writel(TW_CONTROL_CLEAR_ATTENTION_INTERRUPT | TW_CONTROL_UNMASK_RESPONSE_INTERRUPT | TW_CONTROL_ENABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x))) +#define TW_MASK_COMMAND_INTERRUPT(x) (writel(TW_CONTROL_MASK_COMMAND_INTERRUPT, TW_CONTROL_REG_ADDR(x))) +#define TW_UNMASK_COMMAND_INTERRUPT(x) (writel(TW_CONTROL_UNMASK_COMMAND_INTERRUPT, TW_CONTROL_REG_ADDR(x))) +#define TW_SOFT_RESET(x) (writel(TW_CONTROL_ISSUE_SOFT_RESET | \ + TW_CONTROL_CLEAR_HOST_INTERRUPT | \ + TW_CONTROL_CLEAR_ATTENTION_INTERRUPT | \ + TW_CONTROL_MASK_COMMAND_INTERRUPT | \ + TW_CONTROL_MASK_RESPONSE_INTERRUPT | \ + TW_CONTROL_CLEAR_ERROR_STATUS | \ + TW_CONTROL_DISABLE_INTERRUPTS, TW_CONTROL_REG_ADDR(x))) +#define TW_PRINTK(h,a,b,c) { \ +if (h) \ +printk(KERN_WARNING "3w-9xxx: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \ +else \ +printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \ +} +#define TW_MAX_LUNS(srl) (srl < TW_FW_SRL_LUNS_SUPPORTED ? 1 : 16) +#define TW_COMMAND_SIZE (sizeof(dma_addr_t) > 4 ? 5 : 4) +#define TW_APACHE_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 72 : 109) +#define TW_ESCALADE_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 41 : 62) +#define TW_PADDING_LENGTH (sizeof(dma_addr_t) > 4 ? 8 : 0) + +#pragma pack(1) + +/* Scatter Gather List Entry */ +typedef struct TAG_TW_SG_Entry { + dma_addr_t address; + u32 length; +} TW_SG_Entry; + +/* Command Packet */ +typedef struct TW_Command { + unsigned char opcode__sgloffset; + unsigned char size; + unsigned char request_id; + unsigned char unit__hostid; + /* Second DWORD */ + unsigned char status; + unsigned char flags; + union { + unsigned short block_count; + unsigned short parameter_count; + } byte6_offset; + union { + struct { + u32 lba; + TW_SG_Entry sgl[TW_ESCALADE_MAX_SGL_LENGTH]; + dma_addr_t padding; + } io; + struct { + TW_SG_Entry sgl[TW_ESCALADE_MAX_SGL_LENGTH]; + u32 padding; + dma_addr_t padding2; + } param; + } byte8_offset; +} TW_Command; + +/* Command Packet for 9000+ controllers */ +typedef struct TAG_TW_Command_Apache { + unsigned char opcode__reserved; + unsigned char unit; + unsigned short request_id__lunl; + unsigned char status; + unsigned char sgl_offset; + unsigned short sgl_entries__lunh; + unsigned char cdb[16]; + TW_SG_Entry sg_list[TW_APACHE_MAX_SGL_LENGTH]; + unsigned char padding[TW_PADDING_LENGTH]; +} TW_Command_Apache; + +/* New command packet header */ +typedef struct TAG_TW_Command_Apache_Header { + unsigned char sense_data[TW_SENSE_DATA_LENGTH]; + struct { + char reserved[4]; + unsigned short error; + unsigned char padding; + unsigned char severity__reserved; + } status_block; + unsigned char err_specific_desc[98]; + struct { + unsigned char size_header; + unsigned short reserved; + unsigned char size_sense; + } header_desc; +} TW_Command_Apache_Header; + +/* This struct is a union of the 2 command packets */ +typedef struct TAG_TW_Command_Full { + TW_Command_Apache_Header header; + union { + TW_Command oldcommand; + TW_Command_Apache newcommand; + } command; +} TW_Command_Full; + +/* Initconnection structure */ +typedef struct TAG_TW_Initconnect { + unsigned char opcode__reserved; + unsigned char size; + unsigned char request_id; + unsigned char res2; + unsigned char status; + unsigned char flags; + unsigned short message_credits; + u32 features; + unsigned short fw_srl; + unsigned short fw_arch_id; + unsigned short fw_branch; + unsigned short fw_build; + u32 result; +} TW_Initconnect; + +/* Event info structure */ +typedef struct TAG_TW_Event +{ + unsigned int sequence_id; + unsigned int time_stamp_sec; + unsigned short aen_code; + unsigned char severity; + unsigned char retrieved; + unsigned char repeat_count; + unsigned char parameter_len; + unsigned char parameter_data[98]; +} TW_Event; + +typedef struct TAG_TW_Ioctl_Driver_Command { + unsigned int control_code; + unsigned int status; + unsigned int unique_id; + unsigned int sequence_id; + unsigned int os_specific; + unsigned int buffer_length; +} TW_Ioctl_Driver_Command; + +typedef struct TAG_TW_Ioctl_Apache { + TW_Ioctl_Driver_Command driver_command; + char padding[488]; + TW_Command_Full firmware_command; + char data_buffer[1]; +} TW_Ioctl_Buf_Apache; + +/* Lock structure for ioctl get/release lock */ +typedef struct TAG_TW_Lock { + unsigned long timeout_msec; + unsigned long time_remaining_msec; + unsigned long force_flag; +} TW_Lock; + +/* GetParam descriptor */ +typedef struct { + unsigned short table_id; + unsigned short parameter_id; + unsigned short parameter_size_bytes; + unsigned short actual_parameter_size_bytes; + unsigned char data[1]; +} TW_Param_Apache, *PTW_Param_Apache; + +/* Response queue */ +typedef union TAG_TW_Response_Queue { + u32 response_id; + u32 value; +} TW_Response_Queue; + +typedef struct TAG_TW_Info { + char *buffer; + int length; + int offset; + int position; +} TW_Info; + +/* Compatibility information structure */ +typedef struct TAG_TW_Compatibility_Info +{ + char driver_version[32]; + unsigned short working_srl; + unsigned short working_branch; + unsigned short working_build; + unsigned short driver_srl_high; + unsigned short driver_branch_high; + unsigned short driver_build_high; + unsigned short driver_srl_low; + unsigned short driver_branch_low; + unsigned short driver_build_low; +} TW_Compatibility_Info; + +typedef struct TAG_TW_Device_Extension { + u32 __iomem *base_addr; + unsigned long *generic_buffer_virt[TW_Q_LENGTH]; + dma_addr_t generic_buffer_phys[TW_Q_LENGTH]; + TW_Command_Full *command_packet_virt[TW_Q_LENGTH]; + dma_addr_t command_packet_phys[TW_Q_LENGTH]; + struct pci_dev *tw_pci_dev; + struct scsi_cmnd *srb[TW_Q_LENGTH]; + unsigned char free_queue[TW_Q_LENGTH]; + unsigned char free_head; + unsigned char free_tail; + unsigned char pending_queue[TW_Q_LENGTH]; + unsigned char pending_head; + unsigned char pending_tail; + int state[TW_Q_LENGTH]; + unsigned int posted_request_count; + unsigned int max_posted_request_count; + unsigned int pending_request_count; + unsigned int max_pending_request_count; + unsigned int max_sgl_entries; + unsigned int sgl_entries; + unsigned int num_resets; + unsigned int sector_count; + unsigned int max_sector_count; + unsigned int aen_count; + struct Scsi_Host *host; + long flags; + int reset_print; + TW_Event *event_queue[TW_Q_LENGTH]; + unsigned char error_index; + unsigned char event_queue_wrapped; + unsigned int error_sequence_id; + int ioctl_sem_lock; + u32 ioctl_msec; + int chrdev_request_id; + wait_queue_head_t ioctl_wqueue; + struct semaphore ioctl_sem; + char aen_clobber; + unsigned short working_srl; + unsigned short working_branch; + unsigned short working_build; +} TW_Device_Extension; + +#pragma pack() + +#endif /* _3W_9XXX_H */ + |