Buslogic: remove ISA support

The ISA support in Buslogic has been broken for a long time, as all
the I/O path expects a struct device for DMA mapping that is derived from
the PCI device, which would simply crash for ISA adapters.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Link: https://lore.kernel.org/r/20210331073001.46776-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 5 insertions, 179 deletions

diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index ccb061ab0a0a..25ca2f938346 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -562,60 +562,6 @@ done:
 
 
 /*
-  blogic_add_probeaddr_isa appends a single ISA I/O Address to the list
-  of I/O Address and Bus Probe Information to be checked for potential BusLogic
-  Host Adapters.
-*/
-
-static void __init blogic_add_probeaddr_isa(unsigned long io_addr)
-{
-	struct blogic_probeinfo *probeinfo;
-	if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS)
-		return;
-	probeinfo = &blogic_probeinfo_list[blogic_probeinfo_count++];
-	probeinfo->adapter_type = BLOGIC_MULTIMASTER;
-	probeinfo->adapter_bus_type = BLOGIC_ISA_BUS;
-	probeinfo->io_addr = io_addr;
-	probeinfo->pci_device = NULL;
-}
-
-
-/*
-  blogic_init_probeinfo_isa initializes the list of I/O Address and
-  Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters
-  only from the list of standard BusLogic MultiMaster ISA I/O Addresses.
-*/
-
-static void __init blogic_init_probeinfo_isa(struct blogic_adapter *adapter)
-{
-	/*
-	   If BusLogic Driver Options specifications requested that ISA
-	   Bus Probes be inhibited, do not proceed further.
-	 */
-	if (blogic_probe_options.noprobe_isa)
-		return;
-	/*
-	   Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
-	 */
-	if (!blogic_probe_options.limited_isa || blogic_probe_options.probe330)
-		blogic_add_probeaddr_isa(0x330);
-	if (!blogic_probe_options.limited_isa || blogic_probe_options.probe334)
-		blogic_add_probeaddr_isa(0x334);
-	if (!blogic_probe_options.limited_isa || blogic_probe_options.probe230)
-		blogic_add_probeaddr_isa(0x230);
-	if (!blogic_probe_options.limited_isa || blogic_probe_options.probe234)
-		blogic_add_probeaddr_isa(0x234);
-	if (!blogic_probe_options.limited_isa || blogic_probe_options.probe130)
-		blogic_add_probeaddr_isa(0x130);
-	if (!blogic_probe_options.limited_isa || blogic_probe_options.probe134)
-		blogic_add_probeaddr_isa(0x134);
-}
-
-
-#ifdef CONFIG_PCI
-
-
-/*
   blogic_sort_probeinfo sorts a section of blogic_probeinfo_list in order
   of increasing PCI Bus and Device Number.
 */
@@ -667,14 +613,11 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter)
 	int nonpr_mmcount = 0, mmcount = 0;
 	bool force_scan_order = false;
 	bool force_scan_order_checked = false;
-	bool addr_seen[6];
 	struct pci_dev *pci_device = NULL;
 	int i;
 	if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS)
 		return 0;
 	blogic_probeinfo_count++;
-	for (i = 0; i < 6; i++)
-		addr_seen[i] = false;
 	/*
 	   Iterate over the MultiMaster PCI Host Adapters.  For each
 	   enumerated host adapter, determine whether its ISA Compatible
@@ -744,11 +687,8 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter)
 		host_adapter->io_addr = io_addr;
 		blogic_intreset(host_adapter);
 		if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
-				&adapter_info, sizeof(adapter_info)) ==
-				sizeof(adapter_info)) {
-			if (adapter_info.isa_port < 6)
-				addr_seen[adapter_info.isa_port] = true;
-		} else
+				&adapter_info, sizeof(adapter_info)) !=
+				sizeof(adapter_info))
 			adapter_info.isa_port = BLOGIC_IO_DISABLE;
 		/*
 		   Issue the Modify I/O Address command to disable the
@@ -836,45 +776,6 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter)
 		blogic_sort_probeinfo(&blogic_probeinfo_list[nonpr_mmindex],
 					nonpr_mmcount);
 	/*
-	   If no PCI MultiMaster Host Adapter is assigned the Primary
-	   I/O Address, then the Primary I/O Address must be probed
-	   explicitly before any PCI host adapters are probed.
-	 */
-	if (!blogic_probe_options.noprobe_isa)
-		if (pr_probeinfo->io_addr == 0 &&
-				(!blogic_probe_options.limited_isa ||
-				 blogic_probe_options.probe330)) {
-			pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER;
-			pr_probeinfo->adapter_bus_type = BLOGIC_ISA_BUS;
-			pr_probeinfo->io_addr = 0x330;
-		}
-	/*
-	   Append the list of standard BusLogic MultiMaster ISA I/O Addresses,
-	   omitting the Primary I/O Address which has already been handled.
-	 */
-	if (!blogic_probe_options.noprobe_isa) {
-		if (!addr_seen[1] &&
-				(!blogic_probe_options.limited_isa ||
-				 blogic_probe_options.probe334))
-			blogic_add_probeaddr_isa(0x334);
-		if (!addr_seen[2] &&
-				(!blogic_probe_options.limited_isa ||
-				 blogic_probe_options.probe230))
-			blogic_add_probeaddr_isa(0x230);
-		if (!addr_seen[3] &&
-				(!blogic_probe_options.limited_isa ||
-				 blogic_probe_options.probe234))
-			blogic_add_probeaddr_isa(0x234);
-		if (!addr_seen[4] &&
-				(!blogic_probe_options.limited_isa ||
-				 blogic_probe_options.probe130))
-			blogic_add_probeaddr_isa(0x130);
-		if (!addr_seen[5] &&
-				(!blogic_probe_options.limited_isa ||
-				 blogic_probe_options.probe134))
-			blogic_add_probeaddr_isa(0x134);
-	}
-	/*
 	   Iterate over the older non-compliant MultiMaster PCI Host Adapters,
 	   noting the PCI bus location and assigned IRQ Channel.
 	 */
@@ -1078,18 +979,10 @@ static void __init blogic_init_probeinfo_list(struct blogic_adapter *adapter)
 				}
 			}
 		}
-	} else {
-		blogic_init_probeinfo_isa(adapter);
 	}
 }
 
 
-#else
-#define blogic_init_probeinfo_list(adapter) \
-		blogic_init_probeinfo_isa(adapter)
-#endif				/* CONFIG_PCI */
-
-
 /*
   blogic_failure prints a standardized error message, and then returns false.
 */
@@ -1539,14 +1432,6 @@ static bool __init blogic_rdconfig(struct blogic_adapter *adapter)
 		else if (config.irq_ch15)
 			adapter->irq_ch = 15;
 	}
-	if (adapter->adapter_bus_type == BLOGIC_ISA_BUS) {
-		if (config.dma_ch5)
-			adapter->dma_ch = 5;
-		else if (config.dma_ch6)
-			adapter->dma_ch = 6;
-		else if (config.dma_ch7)
-			adapter->dma_ch = 7;
-	}
 	/*
 	   Determine whether Extended Translation is enabled and save it in
 	   the Host Adapter structure.
@@ -1686,8 +1571,7 @@ static bool __init blogic_rdconfig(struct blogic_adapter *adapter)
 	if (adapter->fw_ver[0] == '5')
 		adapter->adapter_qdepth = 192;
 	else if (adapter->fw_ver[0] == '4')
-		adapter->adapter_qdepth = (adapter->adapter_bus_type !=
-						BLOGIC_ISA_BUS ? 100 : 50);
+		adapter->adapter_qdepth = 100;
 	else
 		adapter->adapter_qdepth = 30;
 	if (strcmp(adapter->fw_ver, "3.31") >= 0) {
@@ -1728,13 +1612,6 @@ static bool __init blogic_rdconfig(struct blogic_adapter *adapter)
 	 */
 	adapter->bios_addr = ext_setupinfo.bios_addr << 12;
 	/*
-	   ISA Host Adapters require Bounce Buffers if there is more than
-	   16MB memory.
-	 */
-	if (adapter->adapter_bus_type == BLOGIC_ISA_BUS &&
-			(void *) high_memory > (void *) MAX_DMA_ADDRESS)
-		adapter->need_bouncebuf = true;
-	/*
 	   BusLogic BT-445S Host Adapters prior to board revision E have a
 	   hardware bug whereby when the BIOS is enabled, transfers to/from
 	   the same address range the BIOS occupies modulo 16MB are handled
@@ -1839,11 +1716,7 @@ static bool __init blogic_reportconfig(struct blogic_adapter *adapter)
 	blogic_info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n", adapter, adapter->model, blogic_adapter_busnames[adapter->adapter_bus_type], (adapter->wide ? " Wide" : ""), (adapter->differential ? " Differential" : ""), (adapter->ultra ? " Ultra" : ""));
 	blogic_info("  Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch, (adapter->level_int ? "Level" : "Edge"));
 	if (adapter->adapter_bus_type != BLOGIC_PCI_BUS) {
-		blogic_info("  DMA Channel: ", adapter);
-		if (adapter->dma_ch > 0)
-			blogic_info("%d, ", adapter, adapter->dma_ch);
-		else
-			blogic_info("None, ", adapter);
+		blogic_info("  DMA Channel: None, ", adapter);
 		if (adapter->bios_addr > 0)
 			blogic_info("BIOS Address: 0x%lX, ", adapter,
 					adapter->bios_addr);
@@ -1996,18 +1869,6 @@ static bool __init blogic_getres(struct blogic_adapter *adapter)
 	}
 	adapter->irq_acquired = true;
 	/*
-	   Acquire exclusive access to the DMA Channel.
-	 */
-	if (adapter->dma_ch > 0) {
-		if (request_dma(adapter->dma_ch, adapter->full_model) < 0) {
-			blogic_err("UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", adapter, adapter->dma_ch);
-			return false;
-		}
-		set_dma_mode(adapter->dma_ch, DMA_MODE_CASCADE);
-		enable_dma(adapter->dma_ch);
-		adapter->dma_chan_acquired = true;
-	}
-	/*
 	   Indicate the System Resource Acquisition completed successfully,
 	 */
 	return true;
@@ -2027,11 +1888,6 @@ static void blogic_relres(struct blogic_adapter *adapter)
 	if (adapter->irq_acquired)
 		free_irq(adapter->irq_ch, adapter);
 	/*
-	   Release exclusive access to the DMA Channel.
-	 */
-	if (adapter->dma_chan_acquired)
-		free_dma(adapter->dma_ch);
-	/*
 	   Release any allocated memory structs not released elsewhere
 	 */
 	if (adapter->mbox_space)
@@ -3666,37 +3522,7 @@ static int __init blogic_parseopts(char *options)
 
 		memset(drvr_opts, 0, sizeof(struct blogic_drvr_options));
 		while (*options != '\0' && *options != ';') {
-			/* Probing Options. */
-			if (blogic_parse(&options, "IO:")) {
-				unsigned long io_addr = simple_strtoul(options,
-								&options, 0);
-				blogic_probe_options.limited_isa = true;
-				switch (io_addr) {
-				case 0x330:
-					blogic_probe_options.probe330 = true;
-					break;
-				case 0x334:
-					blogic_probe_options.probe334 = true;
-					break;
-				case 0x230:
-					blogic_probe_options.probe230 = true;
-					break;
-				case 0x234:
-					blogic_probe_options.probe234 = true;
-					break;
-				case 0x130:
-					blogic_probe_options.probe130 = true;
-					break;
-				case 0x134:
-					blogic_probe_options.probe134 = true;
-					break;
-				default:
-					blogic_err("BusLogic: Invalid Driver Options (invalid I/O Address 0x%lX)\n", NULL, io_addr);
-					return 0;
-				}
-			} else if (blogic_parse(&options, "NoProbeISA"))
-				blogic_probe_options.noprobe_isa = true;
-			else if (blogic_parse(&options, "NoProbePCI"))
+			if (blogic_parse(&options, "NoProbePCI"))
 				blogic_probe_options.noprobe_pci = true;
 			else if (blogic_parse(&options, "NoProbe"))
 				blogic_probe_options.noprobe = true;