diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 00:20:36 +0200 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 00:20:36 +0200 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/NCR53C9x.h | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/scsi/NCR53C9x.h')
-rw-r--r-- | drivers/scsi/NCR53C9x.h | 669 |
1 files changed, 669 insertions, 0 deletions
diff --git a/drivers/scsi/NCR53C9x.h b/drivers/scsi/NCR53C9x.h new file mode 100644 index 000000000000..06e7edf23326 --- /dev/null +++ b/drivers/scsi/NCR53C9x.h @@ -0,0 +1,669 @@ +/* NCR53C9x.c: Defines and structures for the NCR53C9x generic driver. + * + * Originaly esp.h: Defines and structures for the Sparc ESP + * (Enhanced SCSI Processor) driver under Linux. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * Generalization by Jesper Skov (jskov@cygnus.co.uk) + * + * More generalization (for i386 stuff) by Tymm Twillman (tymm@computer.org) + */ + +#ifndef NCR53C9X_H +#define NCR53C9X_H + +#include <linux/config.h> +#include <linux/interrupt.h> + +/* djweis for mac driver */ +#if defined(CONFIG_MAC) +#define PAD_SIZE 15 +#else +#define PAD_SIZE 3 +#endif + +/* Handle multiple hostadapters on Amiga + * generally PAD_SIZE = 3 + * but there is one exception: Oktagon (PAD_SIZE = 1) */ +#if defined(CONFIG_OKTAGON_SCSI) || defined(CONFIG_OKTAGON_SCSI_MODULE) +#undef PAD_SIZE +#if defined(CONFIG_BLZ1230_SCSI) || defined(CONFIG_BLZ1230_SCSI_MODULE) || \ + defined(CONFIG_BLZ2060_SCSI) || defined(CONFIG_BLZ2060_SCSI_MODULE) || \ + defined(CONFIG_CYBERSTORM_SCSI) || defined(CONFIG_CYBERSTORM_SCSI_MODULE) || \ + defined(CONFIG_CYBERSTORMII_SCSI) || defined(CONFIG_CYBERSTORMII_SCSI_MODULE) || \ + defined(CONFIG_FASTLANE_SCSI) || defined(CONFIG_FASTLANE_SCSI_MODULE) +#define MULTIPLE_PAD_SIZES +#else +#define PAD_SIZE 1 +#endif +#endif + +/* Macros for debugging messages */ + +#define DEBUG_ESP +/* #define DEBUG_ESP_DATA */ +/* #define DEBUG_ESP_QUEUE */ +/* #define DEBUG_ESP_DISCONNECT */ +/* #define DEBUG_ESP_STATUS */ +/* #define DEBUG_ESP_PHASES */ +/* #define DEBUG_ESP_WORKBUS */ +/* #define DEBUG_STATE_MACHINE */ +/* #define DEBUG_ESP_CMDS */ +/* #define DEBUG_ESP_IRQS */ +/* #define DEBUG_SDTR */ +/* #define DEBUG_ESP_SG */ + +/* Use the following to sprinkle debugging messages in a way which + * suits you if combinations of the above become too verbose when + * trying to track down a specific problem. + */ +/* #define DEBUG_ESP_MISC */ + +#if defined(DEBUG_ESP) +#define ESPLOG(foo) printk foo +#else +#define ESPLOG(foo) +#endif /* (DEBUG_ESP) */ + +#if defined(DEBUG_ESP_DATA) +#define ESPDATA(foo) printk foo +#else +#define ESPDATA(foo) +#endif + +#if defined(DEBUG_ESP_QUEUE) +#define ESPQUEUE(foo) printk foo +#else +#define ESPQUEUE(foo) +#endif + +#if defined(DEBUG_ESP_DISCONNECT) +#define ESPDISC(foo) printk foo +#else +#define ESPDISC(foo) +#endif + +#if defined(DEBUG_ESP_STATUS) +#define ESPSTAT(foo) printk foo +#else +#define ESPSTAT(foo) +#endif + +#if defined(DEBUG_ESP_PHASES) +#define ESPPHASE(foo) printk foo +#else +#define ESPPHASE(foo) +#endif + +#if defined(DEBUG_ESP_WORKBUS) +#define ESPBUS(foo) printk foo +#else +#define ESPBUS(foo) +#endif + +#if defined(DEBUG_ESP_IRQS) +#define ESPIRQ(foo) printk foo +#else +#define ESPIRQ(foo) +#endif + +#if defined(DEBUG_SDTR) +#define ESPSDTR(foo) printk foo +#else +#define ESPSDTR(foo) +#endif + +#if defined(DEBUG_ESP_MISC) +#define ESPMISC(foo) printk foo +#else +#define ESPMISC(foo) +#endif + +/* + * padding for register structure + */ +#ifdef CONFIG_JAZZ_ESP +#define EREGS_PAD(n) +#else +#ifndef MULTIPLE_PAD_SIZES +#define EREGS_PAD(n) unchar n[PAD_SIZE]; +#endif +#endif + +/* The ESP SCSI controllers have their register sets in three + * "classes": + * + * 1) Registers which are both read and write. + * 2) Registers which are read only. + * 3) Registers which are write only. + * + * Yet, they all live within the same IO space. + */ + +#if !defined(__i386__) && !defined(__x86_64__) + +#ifndef MULTIPLE_PAD_SIZES + +#ifdef CONFIG_CPU_HAS_WB +#include <asm/wbflush.h> +#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0) +#else +#define esp_write(__reg, __val) ((__reg) = (__val)) +#endif +#define esp_read(__reg) (__reg) + +struct ESP_regs { + /* Access Description Offset */ + volatile unchar esp_tclow; /* rw Low bits of the transfer count 0x00 */ + EREGS_PAD(tlpad1); + volatile unchar esp_tcmed; /* rw Mid bits of the transfer count 0x04 */ + EREGS_PAD(fdpad); + volatile unchar esp_fdata; /* rw FIFO data bits 0x08 */ + EREGS_PAD(cbpad); + volatile unchar esp_cmnd; /* rw SCSI command bits 0x0c */ + EREGS_PAD(stpad); + volatile unchar esp_status; /* ro ESP status register 0x10 */ +#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ + EREGS_PAD(irqpd); + volatile unchar esp_intrpt; /* ro Kind of interrupt 0x14 */ +#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ + EREGS_PAD(sspad); + volatile unchar esp_sstep; /* ro Sequence step register 0x18 */ +#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ + EREGS_PAD(ffpad); + volatile unchar esp_fflags; /* ro Bits of current FIFO info 0x1c */ +#define esp_soff esp_fflags /* wo Sync offset 0x1c */ + EREGS_PAD(cf1pd); + volatile unchar esp_cfg1; /* rw First configuration register 0x20 */ + EREGS_PAD(cfpad); + volatile unchar esp_cfact; /* wo Clock conversion factor 0x24 */ + EREGS_PAD(ctpad); + volatile unchar esp_ctest; /* wo Chip test register 0x28 */ + EREGS_PAD(cf2pd); + volatile unchar esp_cfg2; /* rw Second configuration register 0x2c */ + EREGS_PAD(cf3pd); + + /* The following is only found on the 53C9X series SCSI chips */ + volatile unchar esp_cfg3; /* rw Third configuration register 0x30 */ + EREGS_PAD(cf4pd); + volatile unchar esp_cfg4; /* rw Fourth configuration register 0x34 */ + EREGS_PAD(thpd); + /* The following is found on all chips except the NCR53C90 (ESP100) */ + volatile unchar esp_tchi; /* rw High bits of transfer count 0x38 */ +#define esp_uid esp_tchi /* ro Unique ID code 0x38 */ + EREGS_PAD(fgpad); + volatile unchar esp_fgrnd; /* rw Data base for fifo 0x3c */ +}; + +#else /* MULTIPLE_PAD_SIZES */ + +#define esp_write(__reg, __val) (*(__reg) = (__val)) +#define esp_read(__reg) (*(__reg)) + +struct ESP_regs { + unsigned char io_addr[64]; /* dummy */ + /* Access Description Offset */ +#define esp_tclow io_addr /* rw Low bits of the transfer count 0x00 */ +#define esp_tcmed io_addr + (1<<(esp->shift)) /* rw Mid bits of the transfer count 0x04 */ +#define esp_fdata io_addr + (2<<(esp->shift)) /* rw FIFO data bits 0x08 */ +#define esp_cmnd io_addr + (3<<(esp->shift)) /* rw SCSI command bits 0x0c */ +#define esp_status io_addr + (4<<(esp->shift)) /* ro ESP status register 0x10 */ +#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ +#define esp_intrpt io_addr + (5<<(esp->shift)) /* ro Kind of interrupt 0x14 */ +#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ +#define esp_sstep io_addr + (6<<(esp->shift)) /* ro Sequence step register 0x18 */ +#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ +#define esp_fflags io_addr + (7<<(esp->shift)) /* ro Bits of current FIFO info 0x1c */ +#define esp_soff esp_fflags /* wo Sync offset 0x1c */ +#define esp_cfg1 io_addr + (8<<(esp->shift)) /* rw First configuration register 0x20 */ +#define esp_cfact io_addr + (9<<(esp->shift)) /* wo Clock conversion factor 0x24 */ +#define esp_ctest io_addr + (10<<(esp->shift)) /* wo Chip test register 0x28 */ +#define esp_cfg2 io_addr + (11<<(esp->shift)) /* rw Second configuration register 0x2c */ + + /* The following is only found on the 53C9X series SCSI chips */ +#define esp_cfg3 io_addr + (12<<(esp->shift)) /* rw Third configuration register 0x30 */ +#define esp_cfg4 io_addr + (13<<(esp->shift)) /* rw Fourth configuration register 0x34 */ + + /* The following is found on all chips except the NCR53C90 (ESP100) */ +#define esp_tchi io_addr + (14<<(esp->shift)) /* rw High bits of transfer count 0x38 */ +#define esp_uid esp_tchi /* ro Unique ID code 0x38 */ +#define esp_fgrnd io_addr + (15<<(esp->shift)) /* rw Data base for fifo 0x3c */ +}; + +#endif + +#else /* !defined(__i386__) && !defined(__x86_64__) */ + +#define esp_write(__reg, __val) outb((__val), (__reg)) +#define esp_read(__reg) inb((__reg)) + +struct ESP_regs { + unsigned int io_addr; + /* Access Description Offset */ +#define esp_tclow io_addr /* rw Low bits of the transfer count 0x00 */ +#define esp_tcmed io_addr + 1 /* rw Mid bits of the transfer count 0x04 */ +#define esp_fdata io_addr + 2 /* rw FIFO data bits 0x08 */ +#define esp_cmnd io_addr + 3 /* rw SCSI command bits 0x0c */ +#define esp_status io_addr + 4 /* ro ESP status register 0x10 */ +#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ +#define esp_intrpt io_addr + 5 /* ro Kind of interrupt 0x14 */ +#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ +#define esp_sstep io_addr + 6 /* ro Sequence step register 0x18 */ +#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ +#define esp_fflags io_addr + 7 /* ro Bits of current FIFO info 0x1c */ +#define esp_soff esp_fflags /* wo Sync offset 0x1c */ +#define esp_cfg1 io_addr + 8 /* rw First configuration register 0x20 */ +#define esp_cfact io_addr + 9 /* wo Clock conversion factor 0x24 */ +#define esp_ctest io_addr + 10 /* wo Chip test register 0x28 */ +#define esp_cfg2 io_addr + 11 /* rw Second configuration register 0x2c */ + + /* The following is only found on the 53C9X series SCSI chips */ +#define esp_cfg3 io_addr + 12 /* rw Third configuration register 0x30 */ +#define esp_cfg4 io_addr + 13 /* rw Fourth configuration register 0x34 */ + + /* The following is found on all chips except the NCR53C90 (ESP100) */ +#define esp_tchi io_addr + 14 /* rw High bits of transfer count 0x38 */ +#define esp_uid esp_tchi /* ro Unique ID code 0x38 */ +#define esp_fgrnd io_addr + 15 /* rw Data base for fifo 0x3c */ +}; + +#endif /* !defined(__i386__) && !defined(__x86_64__) */ + +/* Various revisions of the ESP board. */ +enum esp_rev { + esp100 = 0x00, /* NCR53C90 - very broken */ + esp100a = 0x01, /* NCR53C90A */ + esp236 = 0x02, + fas236 = 0x03, + fas100a = 0x04, + fast = 0x05, + fas366 = 0x06, + fas216 = 0x07, + fsc = 0x08, /* SYM53C94-2 */ + espunknown = 0x09 +}; + +/* We allocate one of these for each scsi device and attach it to + * SDptr->hostdata for use in the driver + */ +struct esp_device { + unsigned char sync_min_period; + unsigned char sync_max_offset; + unsigned sync:1; + unsigned wide:1; + unsigned disconnect:1; +}; + +/* We get one of these for each ESP probed. */ +struct NCR_ESP { + struct NCR_ESP *next; /* Next ESP on probed or NULL */ + struct ESP_regs *eregs; /* All esp registers */ + int dma; /* Who I do transfers with. */ + void *dregs; /* And his registers. */ + struct Scsi_Host *ehost; /* Backpointer to SCSI Host */ + + void *edev; /* Pointer to controller base/SBus */ + int esp_id; /* Unique per-ESP ID number */ + + /* ESP Configuration Registers */ + unsigned char config1; /* Copy of the 1st config register */ + unsigned char config2; /* Copy of the 2nd config register */ + unsigned char config3[16]; /* Copy of the 3rd config register */ + + /* The current command we are sending to the ESP chip. This esp_command + * ptr needs to be mapped in DVMA area so we can send commands and read + * from the ESP fifo without burning precious CPU cycles. Programmed I/O + * sucks when we have the DVMA to do it for us. The ESP is stupid and will + * only send out 6, 10, and 12 byte SCSI commands, others we need to send + * one byte at a time. esp_slowcmd being set says that we are doing one + * of the command types ESP doesn't understand, esp_scmdp keeps track of + * which byte we are sending, esp_scmdleft says how many bytes to go. + */ + volatile unchar *esp_command; /* Location of command (CPU view) */ + __u32 esp_command_dvma; /* Location of command (DVMA view) */ + unsigned char esp_clen; /* Length of this command */ + unsigned char esp_slowcmd; + unsigned char *esp_scmdp; + unsigned char esp_scmdleft; + + /* The following are used to determine the cause of an IRQ. Upon every + * IRQ entry we synchronize these with the hardware registers. + */ + unchar ireg; /* Copy of ESP interrupt register */ + unchar sreg; /* Same for ESP status register */ + unchar seqreg; /* The ESP sequence register */ + + /* The following is set when a premature interrupt condition is detected + * in some FAS revisions. + */ + unchar fas_premature_intr_workaround; + + /* To save register writes to the ESP, which can be expensive, we + * keep track of the previous value that various registers had for + * the last target we connected to. If they are the same for the + * current target, we skip the register writes as they are not needed. + */ + unchar prev_soff, prev_stp, prev_cfg3; + + /* For each target we keep track of save/restore data + * pointer information. This needs to be updated majorly + * when we add support for tagged queueing. -DaveM + */ + struct esp_pointers { + char *saved_ptr; + struct scatterlist *saved_buffer; + int saved_this_residual; + int saved_buffers_residual; + } data_pointers[16] /*XXX [MAX_TAGS_PER_TARGET]*/; + + /* Clock periods, frequencies, synchronization, etc. */ + unsigned int cfreq; /* Clock frequency in HZ */ + unsigned int cfact; /* Clock conversion factor */ + unsigned int ccycle; /* One ESP clock cycle */ + unsigned int ctick; /* One ESP clock time */ + unsigned int radelay; /* FAST chip req/ack delay */ + unsigned int neg_defp; /* Default negotiation period */ + unsigned int sync_defp; /* Default sync transfer period */ + unsigned int max_period; /* longest our period can be */ + unsigned int min_period; /* shortest period we can withstand */ + /* For slow to medium speed input clock rates we shoot for 5mb/s, + * but for high input clock rates we try to do 10mb/s although I + * don't think a transfer can even run that fast with an ESP even + * with DMA2 scatter gather pipelining. + */ +#define SYNC_DEFP_SLOW 0x32 /* 5mb/s */ +#define SYNC_DEFP_FAST 0x19 /* 10mb/s */ + + unsigned int snip; /* Sync. negotiation in progress */ + unsigned int wnip; /* WIDE negotiation in progress */ + unsigned int targets_present; /* targets spoken to before */ + + int current_transfer_size; /* Set at beginning of data dma */ + + unchar espcmdlog[32]; /* Log of current esp cmds sent. */ + unchar espcmdent; /* Current entry in esp cmd log. */ + + /* Misc. info about this ESP */ + enum esp_rev erev; /* ESP revision */ + int irq; /* IRQ for this ESP */ + int scsi_id; /* Who am I as initiator? */ + int scsi_id_mask; /* Bitmask of 'me'. */ + int diff; /* Differential SCSI bus? */ + int slot; /* Slot the adapter occupies */ + + /* Our command queues, only one cmd lives in the current_SC queue. */ + Scsi_Cmnd *issue_SC; /* Commands to be issued */ + Scsi_Cmnd *current_SC; /* Who is currently working the bus */ + Scsi_Cmnd *disconnected_SC; /* Commands disconnected from the bus */ + + /* Message goo */ + unchar cur_msgout[16]; + unchar cur_msgin[16]; + unchar prevmsgout, prevmsgin; + unchar msgout_len, msgin_len; + unchar msgout_ctr, msgin_ctr; + + /* States that we cannot keep in the per cmd structure because they + * cannot be assosciated with any specific command. + */ + unchar resetting_bus; + wait_queue_head_t reset_queue; + + unchar do_pio_cmds; /* Do command transfer with pio */ + + /* How much bits do we have to shift the registers */ + unsigned char shift; + + /* Functions handling DMA + */ + /* Required functions */ + int (*dma_bytes_sent)(struct NCR_ESP *, int); + int (*dma_can_transfer)(struct NCR_ESP *, Scsi_Cmnd *); + void (*dma_dump_state)(struct NCR_ESP *); + void (*dma_init_read)(struct NCR_ESP *, __u32, int); + void (*dma_init_write)(struct NCR_ESP *, __u32, int); + void (*dma_ints_off)(struct NCR_ESP *); + void (*dma_ints_on)(struct NCR_ESP *); + int (*dma_irq_p)(struct NCR_ESP *); + int (*dma_ports_p)(struct NCR_ESP *); + void (*dma_setup)(struct NCR_ESP *, __u32, int, int); + + /* Optional functions (i.e. may be initialized to 0) */ + void (*dma_barrier)(struct NCR_ESP *); + void (*dma_drain)(struct NCR_ESP *); + void (*dma_invalidate)(struct NCR_ESP *); + void (*dma_irq_entry)(struct NCR_ESP *); + void (*dma_irq_exit)(struct NCR_ESP *); + void (*dma_led_off)(struct NCR_ESP *); + void (*dma_led_on)(struct NCR_ESP *); + void (*dma_poll)(struct NCR_ESP *, unsigned char *); + void (*dma_reset)(struct NCR_ESP *); + + /* Optional virtual DMA functions */ + void (*dma_mmu_get_scsi_one)(struct NCR_ESP *, Scsi_Cmnd *); + void (*dma_mmu_get_scsi_sgl)(struct NCR_ESP *, Scsi_Cmnd *); + void (*dma_mmu_release_scsi_one)(struct NCR_ESP *, Scsi_Cmnd *); + void (*dma_mmu_release_scsi_sgl)(struct NCR_ESP *, Scsi_Cmnd *); + void (*dma_advance_sg)(Scsi_Cmnd *); +}; + +/* Bitfield meanings for the above registers. */ + +/* ESP config reg 1, read-write, found on all ESP chips */ +#define ESP_CONFIG1_ID 0x07 /* My BUS ID bits */ +#define ESP_CONFIG1_CHTEST 0x08 /* Enable ESP chip tests */ +#define ESP_CONFIG1_PENABLE 0x10 /* Enable parity checks */ +#define ESP_CONFIG1_PARTEST 0x20 /* Parity test mode enabled? */ +#define ESP_CONFIG1_SRRDISAB 0x40 /* Disable SCSI reset reports */ +#define ESP_CONFIG1_SLCABLE 0x80 /* Enable slow cable mode */ + +/* ESP config reg 2, read-write, found only on esp100a+esp200+esp236+fsc chips */ +#define ESP_CONFIG2_DMAPARITY 0x01 /* enable DMA Parity (200,236,fsc) */ +#define ESP_CONFIG2_REGPARITY 0x02 /* enable reg Parity (200,236,fsc) */ +#define ESP_CONFIG2_BADPARITY 0x04 /* Bad parity target abort */ +#define ESP_CONFIG2_SCSI2ENAB 0x08 /* Enable SCSI-2 features (tmode only) */ +#define ESP_CONFIG2_HI 0x10 /* High Impedance DREQ ??? */ +#define ESP_CONFIG2_HMEFENAB 0x10 /* HME features enable */ +#define ESP_CONFIG2_BCM 0x20 /* Enable byte-ctrl (236,fsc) */ +#define ESP_CONFIG2_FENAB 0x40 /* Enable features (fas100,esp216,fsc) */ +#define ESP_CONFIG2_SPL 0x40 /* Enable status-phase latch (esp236) */ +#define ESP_CONFIG2_RFB 0x80 /* Reserve FIFO byte (fsc) */ +#define ESP_CONFIG2_MAGIC 0xe0 /* Invalid bits... */ + +/* ESP config register 3 read-write, found only esp236+fas236+fas100a+fsc chips */ +#define ESP_CONFIG3_FCLOCK 0x01 /* FAST SCSI clock rate (esp100a/fas366) */ +#define ESP_CONFIG3_TEM 0x01 /* Enable thresh-8 mode (esp/fas236/fsc) */ +#define ESP_CONFIG3_FAST 0x02 /* Enable FAST SCSI (esp100a) */ +#define ESP_CONFIG3_ADMA 0x02 /* Enable alternate-dma (esp/fas236/fsc) */ +#define ESP_CONFIG3_TENB 0x04 /* group2 SCSI2 support (esp100a) */ +#define ESP_CONFIG3_SRB 0x04 /* Save residual byte (esp/fas236/fsc) */ +#define ESP_CONFIG3_TMS 0x08 /* Three-byte msg's ok (esp100a) */ +#define ESP_CONFIG3_FCLK 0x08 /* Fast SCSI clock rate (esp/fas236/fsc) */ +#define ESP_CONFIG3_IDMSG 0x10 /* ID message checking (esp100a) */ +#define ESP_CONFIG3_FSCSI 0x10 /* Enable FAST SCSI (esp/fas236/fsc) */ +#define ESP_CONFIG3_GTM 0x20 /* group2 SCSI2 support (esp/fas236/fsc) */ +#define ESP_CONFIG3_TBMS 0x40 /* Three-byte msg's ok (esp/fas236/fsc) */ +#define ESP_CONFIG3_IMS 0x80 /* ID msg chk'ng (esp/fas236/fsc) */ + +/* ESP config register 4 read-write, found only on fsc chips */ +#define ESP_CONFIG4_BBTE 0x01 /* Back-to-Back transfer enable */ +#define ESP_CONFIG4_TEST 0x02 /* Transfer counter test mode */ +#define ESP_CONFIG4_EAN 0x04 /* Enable Active Negotiation */ + +/* ESP command register read-write */ +/* Group 1 commands: These may be sent at any point in time to the ESP + * chip. None of them can generate interrupts 'cept + * the "SCSI bus reset" command if you have not disabled + * SCSI reset interrupts in the config1 ESP register. + */ +#define ESP_CMD_NULL 0x00 /* Null command, ie. a nop */ +#define ESP_CMD_FLUSH 0x01 /* FIFO Flush */ +#define ESP_CMD_RC 0x02 /* Chip reset */ +#define ESP_CMD_RS 0x03 /* SCSI bus reset */ + +/* Group 2 commands: ESP must be an initiator and connected to a target + * for these commands to work. + */ +#define ESP_CMD_TI 0x10 /* Transfer Information */ +#define ESP_CMD_ICCSEQ 0x11 /* Initiator cmd complete sequence */ +#define ESP_CMD_MOK 0x12 /* Message okie-dokie */ +#define ESP_CMD_TPAD 0x18 /* Transfer Pad */ +#define ESP_CMD_SATN 0x1a /* Set ATN */ +#define ESP_CMD_RATN 0x1b /* De-assert ATN */ + +/* Group 3 commands: ESP must be in the MSGOUT or MSGIN state and be connected + * to a target as the initiator for these commands to work. + */ +#define ESP_CMD_SMSG 0x20 /* Send message */ +#define ESP_CMD_SSTAT 0x21 /* Send status */ +#define ESP_CMD_SDATA 0x22 /* Send data */ +#define ESP_CMD_DSEQ 0x23 /* Discontinue Sequence */ +#define ESP_CMD_TSEQ 0x24 /* Terminate Sequence */ +#define ESP_CMD_TCCSEQ 0x25 /* Target cmd cmplt sequence */ +#define ESP_CMD_DCNCT 0x27 /* Disconnect */ +#define ESP_CMD_RMSG 0x28 /* Receive Message */ +#define ESP_CMD_RCMD 0x29 /* Receive Command */ +#define ESP_CMD_RDATA 0x2a /* Receive Data */ +#define ESP_CMD_RCSEQ 0x2b /* Receive cmd sequence */ + +/* Group 4 commands: The ESP must be in the disconnected state and must + * not be connected to any targets as initiator for + * these commands to work. + */ +#define ESP_CMD_RSEL 0x40 /* Reselect */ +#define ESP_CMD_SEL 0x41 /* Select w/o ATN */ +#define ESP_CMD_SELA 0x42 /* Select w/ATN */ +#define ESP_CMD_SELAS 0x43 /* Select w/ATN & STOP */ +#define ESP_CMD_ESEL 0x44 /* Enable selection */ +#define ESP_CMD_DSEL 0x45 /* Disable selections */ +#define ESP_CMD_SA3 0x46 /* Select w/ATN3 */ +#define ESP_CMD_RSEL3 0x47 /* Reselect3 */ + +/* This bit enables the ESP's DMA */ +#define ESP_CMD_DMA 0x80 /* Do DMA? */ + +/* ESP status register read-only */ +#define ESP_STAT_PIO 0x01 /* IO phase bit */ +#define ESP_STAT_PCD 0x02 /* CD phase bit */ +#define ESP_STAT_PMSG 0x04 /* MSG phase bit */ +#define ESP_STAT_PMASK 0x07 /* Mask of phase bits */ +#define ESP_STAT_TDONE 0x08 /* Transfer Completed */ +#define ESP_STAT_TCNT 0x10 /* Transfer Counter Is Zero */ +#define ESP_STAT_PERR 0x20 /* Parity error */ +#define ESP_STAT_SPAM 0x40 /* Real bad error */ +/* This indicates the 'interrupt pending' condition, it is a reserved + * bit on old revs of the ESP (ESP100, ESP100A, FAS100A). + */ +#define ESP_STAT_INTR 0x80 /* Interrupt */ + +/* The status register can be masked with ESP_STAT_PMASK and compared + * with the following values to determine the current phase the ESP + * (at least thinks it) is in. For our purposes we also add our own + * software 'done' bit for our phase management engine. + */ +#define ESP_DOP (0) /* Data Out */ +#define ESP_DIP (ESP_STAT_PIO) /* Data In */ +#define ESP_CMDP (ESP_STAT_PCD) /* Command */ +#define ESP_STATP (ESP_STAT_PCD|ESP_STAT_PIO) /* Status */ +#define ESP_MOP (ESP_STAT_PMSG|ESP_STAT_PCD) /* Message Out */ +#define ESP_MIP (ESP_STAT_PMSG|ESP_STAT_PCD|ESP_STAT_PIO) /* Message In */ + +/* ESP interrupt register read-only */ +#define ESP_INTR_S 0x01 /* Select w/o ATN */ +#define ESP_INTR_SATN 0x02 /* Select w/ATN */ +#define ESP_INTR_RSEL 0x04 /* Reselected */ +#define ESP_INTR_FDONE 0x08 /* Function done */ +#define ESP_INTR_BSERV 0x10 /* Bus service */ +#define ESP_INTR_DC 0x20 /* Disconnect */ +#define ESP_INTR_IC 0x40 /* Illegal command given */ +#define ESP_INTR_SR 0x80 /* SCSI bus reset detected */ + +/* Interrupt status macros */ +#define ESP_SRESET_IRQ(esp) ((esp)->intreg & (ESP_INTR_SR)) +#define ESP_ILLCMD_IRQ(esp) ((esp)->intreg & (ESP_INTR_IC)) +#define ESP_SELECT_WITH_ATN_IRQ(esp) ((esp)->intreg & (ESP_INTR_SATN)) +#define ESP_SELECT_WITHOUT_ATN_IRQ(esp) ((esp)->intreg & (ESP_INTR_S)) +#define ESP_SELECTION_IRQ(esp) ((ESP_SELECT_WITH_ATN_IRQ(esp)) || \ + (ESP_SELECT_WITHOUT_ATN_IRQ(esp))) +#define ESP_RESELECTION_IRQ(esp) ((esp)->intreg & (ESP_INTR_RSEL)) + +/* ESP sequence step register read-only */ +#define ESP_STEP_VBITS 0x07 /* Valid bits */ +#define ESP_STEP_ASEL 0x00 /* Selection&Arbitrate cmplt */ +#define ESP_STEP_SID 0x01 /* One msg byte sent */ +#define ESP_STEP_NCMD 0x02 /* Was not in command phase */ +#define ESP_STEP_PPC 0x03 /* Early phase chg caused cmnd + * bytes to be lost + */ +#define ESP_STEP_FINI4 0x04 /* Command was sent ok */ + +/* Ho hum, some ESP's set the step register to this as well... */ +#define ESP_STEP_FINI5 0x05 +#define ESP_STEP_FINI6 0x06 +#define ESP_STEP_FINI7 0x07 +#define ESP_STEP_SOM 0x08 /* Synchronous Offset Max */ + +/* ESP chip-test register read-write */ +#define ESP_TEST_TARG 0x01 /* Target test mode */ +#define ESP_TEST_INI 0x02 /* Initiator test mode */ +#define ESP_TEST_TS 0x04 /* Tristate test mode */ + +/* ESP unique ID register read-only, found on fas236+fas100a+fsc only */ +#define ESP_UID_F100A 0x00 /* FAS100A */ +#define ESP_UID_F236 0x02 /* FAS236 */ +#define ESP_UID_FSC 0xa2 /* NCR53CF9x-2 */ +#define ESP_UID_REV 0x07 /* ESP revision */ +#define ESP_UID_FAM 0xf8 /* ESP family */ + +/* ESP fifo flags register read-only */ +/* Note that the following implies a 16 byte FIFO on the ESP. */ +#define ESP_FF_FBYTES 0x1f /* Num bytes in FIFO */ +#define ESP_FF_ONOTZERO 0x20 /* offset ctr not zero (esp100,fsc) */ +#define ESP_FF_SSTEP 0xe0 /* Sequence step */ + +/* ESP clock conversion factor register write-only */ +#define ESP_CCF_F0 0x00 /* 35.01MHz - 40MHz */ +#define ESP_CCF_NEVER 0x01 /* Set it to this and die */ +#define ESP_CCF_F2 0x02 /* 10MHz */ +#define ESP_CCF_F3 0x03 /* 10.01MHz - 15MHz */ +#define ESP_CCF_F4 0x04 /* 15.01MHz - 20MHz */ +#define ESP_CCF_F5 0x05 /* 20.01MHz - 25MHz */ +#define ESP_CCF_F6 0x06 /* 25.01MHz - 30MHz */ +#define ESP_CCF_F7 0x07 /* 30.01MHz - 35MHz */ + +#define ESP_BUS_TIMEOUT 275 /* In milli-seconds */ +#define ESP_TIMEO_CONST 8192 +#define FSC_TIMEO_CONST 7668 +#define ESP_NEG_DEFP(mhz, cfact) \ + ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (8192 * (cfact))) +#define FSC_NEG_DEFP(mhz, cfact) \ + ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (7668 * (cfact))) +#define ESP_MHZ_TO_CYCLE(mhertz) ((1000000000) / ((mhertz) / 1000)) +#define ESP_TICK(ccf, cycle) ((7682 * (ccf) * (cycle) / 1000)) + + +/* UGLY, UGLY, UGLY! */ +extern int nesps, esps_in_use, esps_running; + +/* For our interrupt engine. */ +#define for_each_esp(esp) \ + for((esp) = espchain; (esp); (esp) = (esp)->next) + + +/* External functions */ +extern void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs); +extern struct NCR_ESP *esp_allocate(Scsi_Host_Template *, void *); +extern void esp_deallocate(struct NCR_ESP *); +extern void esp_release(void); +extern void esp_initialize(struct NCR_ESP *); +extern irqreturn_t esp_intr(int, void *, struct pt_regs *); +extern const char *esp_info(struct Scsi_Host *); +extern int esp_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); +extern int esp_abort(Scsi_Cmnd *); +extern int esp_reset(Scsi_Cmnd *); +extern int esp_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, + int inout); +extern int esp_slave_alloc(Scsi_Device *); +extern void esp_slave_destroy(Scsi_Device *); +#endif /* !(NCR53C9X_H) */ |