[SCSI] aacraid: remove pigs in space

I was amazed at how much embedded space was present in the aacraid
driver source files. Just selected five files from the set to clean up
for now and the attached patch swelled to 73K in size!

- Removed trailing space or tabs
- Removed spaces embedded within tabs
- Replaced leading 8 spaces with tabs
- Removed spaces before )
- Removed ClusterCommand as it was unused (noticed it as one triggered by above)
- Replaced scsi_status comparison with 0x02, to compare against SAM_STATUS_CHECK_CONDITION.
- Replaced a long series of spaces with tabs
- Replaced some simple if...defined() with ifdef/ifndef

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 153 insertions, 157 deletions

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 858b97494343..8a5b9c898e5b 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1,4 +1,4 @@
-#if (!defined(dprintk))
+#ifndef dprintk
 # define dprintk(x)
 #endif
 /* eg: if (nblank(dprintk(x))) */
@@ -50,9 +50,9 @@ struct diskparm
 /*
  *	Firmware constants
  */
- 
+
 #define		CT_NONE			0
-#define 	CT_OK        		218
+#define		CT_OK			218
 #define		FT_FILESYS	8	/* ADAPTEC's "FSA"(tm) filesystem */
 #define		FT_DRIVE	9	/* physical disk - addressable in scsi by bus/id/lun */
 
@@ -107,12 +107,12 @@ struct user_sgentryraw {
 
 struct sgmap {
 	__le32		count;
-	struct sgentry	sg[1]; 
+	struct sgentry	sg[1];
 };
 
 struct user_sgmap {
 	u32		count;
-	struct user_sgentry	sg[1]; 
+	struct user_sgentry	sg[1];
 };
 
 struct sgmap64 {
@@ -137,18 +137,18 @@ struct user_sgmapraw {
 
 struct creation_info
 {
-	u8 		buildnum;		/* e.g., 588 */
-	u8 		usec;			/* e.g., 588 */
-	u8	 	via;			/* e.g., 1 = FSU,
-						 * 	 2 = API
+	u8		buildnum;		/* e.g., 588 */
+	u8		usec;			/* e.g., 588 */
+	u8		via;			/* e.g., 1 = FSU,
+						 *	 2 = API
 						 */
-	u8	 	year;		 	/* e.g., 1997 = 97 */
+	u8		year;			/* e.g., 1997 = 97 */
 	__le32		date;			/*
-						 * unsigned 	Month		:4;	// 1 - 12
-						 * unsigned 	Day		:6;	// 1 - 32
-						 * unsigned 	Hour		:6;	// 0 - 23
-						 * unsigned 	Minute		:6;	// 0 - 60
-						 * unsigned 	Second		:6;	// 0 - 60
+						 * unsigned	Month		:4;	// 1 - 12
+						 * unsigned	Day		:6;	// 1 - 32
+						 * unsigned	Hour		:6;	// 0 - 23
+						 * unsigned	Minute		:6;	// 0 - 60
+						 * unsigned	Second		:6;	// 0 - 60
 						 */
 	__le32		serial[2];			/* e.g., 0x1DEADB0BFAFAF001 */
 };
@@ -184,7 +184,7 @@ struct creation_info
 /*
  *	Set the queues on a 16 byte alignment
  */
- 
+
 #define QUEUE_ALIGNMENT		16
 
 /*
@@ -203,9 +203,9 @@ struct aac_entry {
  *	The adapter assumes the ProducerIndex and ConsumerIndex are grouped
  *	adjacently and in that order.
  */
- 
+
 struct aac_qhdr {
-	__le64 header_addr;/* Address to hand the adapter to access 
+	__le64 header_addr;/* Address to hand the adapter to access
 			      to this queue head */
 	__le32 *producer; /* The producer index for this queue (host address) */
 	__le32 *consumer; /* The consumer index for this queue (host address) */
@@ -215,7 +215,7 @@ struct aac_qhdr {
  *	Define all the events which the adapter would like to notify
  *	the host of.
  */
- 
+
 #define		HostNormCmdQue		1	/* Change in host normal priority command queue */
 #define		HostHighCmdQue		2	/* Change in host high priority command queue */
 #define		HostNormRespQue		3	/* Change in host normal priority response queue */
@@ -286,17 +286,17 @@ struct aac_fibhdr {
 	u8 StructType;		/* Type FIB */
 	u8 Flags;		/* Flags for FIB */
 	__le16 Size;		/* Size of this FIB in bytes */
-	__le16 SenderSize;	/* Size of the FIB in the sender 
+	__le16 SenderSize;	/* Size of the FIB in the sender
 				   (for response sizing) */
 	__le32 SenderFibAddress;  /* Host defined data in the FIB */
-	__le32 ReceiverFibAddress;/* Logical address of this FIB for 
+	__le32 ReceiverFibAddress;/* Logical address of this FIB for
 				     the adapter */
 	u32 SenderData;		/* Place holder for the sender to store data */
 	union {
 		struct {
-		    __le32 _ReceiverTimeStart; 	/* Timestamp for 
+		    __le32 _ReceiverTimeStart;	/* Timestamp for
 						   receipt of fib */
-		    __le32 _ReceiverTimeDone;	/* Timestamp for 
+		    __le32 _ReceiverTimeDone;	/* Timestamp for
 						   completion of fib */
 		} _s;
 	} _u;
@@ -311,7 +311,7 @@ struct hw_fib {
  *	FIB commands
  */
 
-#define 	TestCommandResponse		1
+#define		TestCommandResponse		1
 #define		TestAdapterCommand		2
 /*
  *	Lowlevel and comm commands
@@ -350,10 +350,6 @@ struct hw_fib {
 #define		ContainerCommand64		501
 #define		ContainerRawIo			502
 /*
- *	Cluster Commands
- */
-#define		ClusterCommand	 		550
-/*
  *	Scsi Port commands (scsi passthrough)
  */
 #define		ScsiPortCommand			600
@@ -375,19 +371,19 @@ struct hw_fib {
  */
 
 enum fib_xfer_state {
-	HostOwned 			= (1<<0),
-	AdapterOwned 			= (1<<1),
-	FibInitialized 			= (1<<2),
-	FibEmpty 			= (1<<3),
-	AllocatedFromPool 		= (1<<4),
-	SentFromHost 			= (1<<5),
-	SentFromAdapter 		= (1<<6),
-	ResponseExpected 		= (1<<7),
-	NoResponseExpected 		= (1<<8),
-	AdapterProcessed 		= (1<<9),
-	HostProcessed 			= (1<<10),
-	HighPriority 			= (1<<11),
-	NormalPriority 			= (1<<12),
+	HostOwned			= (1<<0),
+	AdapterOwned			= (1<<1),
+	FibInitialized			= (1<<2),
+	FibEmpty			= (1<<3),
+	AllocatedFromPool		= (1<<4),
+	SentFromHost			= (1<<5),
+	SentFromAdapter			= (1<<6),
+	ResponseExpected		= (1<<7),
+	NoResponseExpected		= (1<<8),
+	AdapterProcessed		= (1<<9),
+	HostProcessed			= (1<<10),
+	HighPriority			= (1<<11),
+	NormalPriority			= (1<<12),
 	Async				= (1<<13),
 	AsyncIo				= (1<<13),	// rpbfix: remove with new regime
 	PageFileIo			= (1<<14),	// rpbfix: remove with new regime
@@ -420,7 +416,7 @@ struct aac_init
 	__le32	AdapterFibAlign;
 	__le32	printfbuf;
 	__le32	printfbufsiz;
-	__le32	HostPhysMemPages;   /* number of 4k pages of host 
+	__le32	HostPhysMemPages;   /* number of 4k pages of host
 				       physical memory */
 	__le32	HostElapsedSeconds; /* number of seconds since 1970. */
 	/*
@@ -481,7 +477,7 @@ struct adapter_ops
 
 struct aac_driver_ident
 {
-	int 	(*init)(struct aac_dev *dev);
+	int	(*init)(struct aac_dev *dev);
 	char *	name;
 	char *	vname;
 	char *	model;
@@ -489,7 +485,7 @@ struct aac_driver_ident
 	int	quirks;
 };
 /*
- * Some adapter firmware needs communication memory 
+ * Some adapter firmware needs communication memory
  * below 2gig. This tells the init function to set the
  * dma mask such that fib memory will be allocated where the
  * adapter firmware can get to it.
@@ -531,29 +527,29 @@ struct aac_driver_ident
  *	physically contigous block. The host structure that defines the
  *	commuication queues will assume they are each a separate physically
  *	contigous memory region that will support them all being one big
- *	contigous block. 
+ *	contigous block.
  *	There is a command and response queue for each level and direction of
  *	commuication. These regions are accessed by both the host and adapter.
  */
- 
+
 struct aac_queue {
-	u64		 	logical;	/*address we give the adapter */
+	u64			logical;	/*address we give the adapter */
 	struct aac_entry	*base;		/*system virtual address */
-	struct aac_qhdr 	headers;       	/*producer,consumer q headers*/
-	u32	 		entries;	/*Number of queue entries */
+	struct aac_qhdr		headers;	/*producer,consumer q headers*/
+	u32			entries;	/*Number of queue entries */
 	wait_queue_head_t	qfull;		/*Event to wait on if q full */
 	wait_queue_head_t	cmdready;	/*Cmd ready from the adapter */
-                  /* This is only valid for adapter to host command queues. */ 
-	spinlock_t	 	*lock;		/* Spinlock for this queue must take this lock before accessing the lock */
+		/* This is only valid for adapter to host command queues. */
+	spinlock_t		*lock;		/* Spinlock for this queue must take this lock before accessing the lock */
 	spinlock_t		lockdata;	/* Actual lock (used only on one side of the lock) */
-	struct list_head 	cmdq;	   	/* A queue of FIBs which need to be prcessed by the FS thread. This is */
-                                		/* only valid for command queues which receive entries from the adapter. */
+	struct list_head	cmdq;		/* A queue of FIBs which need to be prcessed by the FS thread. This is */
+						/* only valid for command queues which receive entries from the adapter. */
 	u32			numpending;	/* Number of entries on outstanding queue. */
 	struct aac_dev *	dev;		/* Back pointer to adapter structure */
 };
 
 /*
- *	Message queues. The order here is important, see also the 
+ *	Message queues. The order here is important, see also the
  *	queue type ordering
  */
 
@@ -565,12 +561,12 @@ struct aac_queue_block
 /*
  *	SaP1 Message Unit Registers
  */
- 
+
 struct sa_drawbridge_CSR {
-				/*	Offset 	|  Name */
+				/*	Offset	|  Name */
 	__le32	reserved[10];	/*	00h-27h |  Reserved */
 	u8	LUT_Offset;	/*	28h	|  Lookup Table Offset */
-	u8	reserved1[3];	/* 	29h-2bh	|  Reserved */
+	u8	reserved1[3];	/*	29h-2bh	|  Reserved */
 	__le32	LUT_Data;	/*	2ch	|  Looup Table Data */
 	__le32	reserved2[26];	/*	30h-97h	|  Reserved */
 	__le16	PRICLEARIRQ;	/*	98h	|  Primary Clear Irq */
@@ -589,8 +585,8 @@ struct sa_drawbridge_CSR {
 	__le32	MAILBOX5;	/*	bch	|  Scratchpad 5 */
 	__le32	MAILBOX6;	/*	c0h	|  Scratchpad 6 */
 	__le32	MAILBOX7;	/*	c4h	|  Scratchpad 7 */
-	__le32	ROM_Setup_Data;	/*	c8h 	|  Rom Setup and Data */
-	__le32	ROM_Control_Addr;/*	cch 	|  Rom Control and Address */
+	__le32	ROM_Setup_Data;	/*	c8h	|  Rom Setup and Data */
+	__le32	ROM_Control_Addr;/*	cch	|  Rom Control and Address */
 	__le32	reserved3[12];	/*	d0h-ffh	|  reserved */
 	__le32	LUT[64];	/*    100h-1ffh	|  Lookup Table Entries */
 };
@@ -603,7 +599,7 @@ struct sa_drawbridge_CSR {
 #define Mailbox5	SaDbCSR.MAILBOX5
 #define Mailbox6	SaDbCSR.MAILBOX6
 #define Mailbox7	SaDbCSR.MAILBOX7
-	
+
 #define DoorbellReg_p SaDbCSR.PRISETIRQ
 #define DoorbellReg_s SaDbCSR.SECSETIRQ
 #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ
@@ -617,19 +613,19 @@ struct sa_drawbridge_CSR {
 #define DOORBELL_5	0x0020
 #define DOORBELL_6	0x0040
 
-	
+
 #define PrintfReady	DOORBELL_5
 #define PrintfDone	DOORBELL_5
-	
+
 struct sa_registers {
 	struct sa_drawbridge_CSR	SaDbCSR;			/* 98h - c4h */
 };
-	
+
 
 #define Sa_MINIPORT_REVISION			1
 
 #define sa_readw(AEP, CSR)		readl(&((AEP)->regs.sa->CSR))
-#define sa_readl(AEP,  CSR)		readl(&((AEP)->regs.sa->CSR))
+#define sa_readl(AEP, CSR)		readl(&((AEP)->regs.sa->CSR))
 #define sa_writew(AEP, CSR, value)	writew(value, &((AEP)->regs.sa->CSR))
 #define sa_writel(AEP, CSR, value)	writel(value, &((AEP)->regs.sa->CSR))
 
@@ -646,21 +642,21 @@ struct rx_mu_registers {
 	__le32	IMRx[2];    /*	1310h  | 10h | Inbound Message Registers */
 	__le32	OMRx[2];    /*	1318h  | 18h | Outbound Message Registers */
 	__le32	IDR;	    /*	1320h  | 20h | Inbound Doorbell Register */
-	__le32	IISR;	    /*	1324h  | 24h | Inbound Interrupt 
+	__le32	IISR;	    /*	1324h  | 24h | Inbound Interrupt
 						Status Register */
-	__le32	IIMR;	    /*	1328h  | 28h | Inbound Interrupt 
-					 	Mask Register */
+	__le32	IIMR;	    /*	1328h  | 28h | Inbound Interrupt
+						Mask Register */
 	__le32	ODR;	    /*	132Ch  | 2Ch | Outbound Doorbell Register */
-	__le32	OISR;	    /*	1330h  | 30h | Outbound Interrupt 
+	__le32	OISR;	    /*	1330h  | 30h | Outbound Interrupt
 						Status Register */
-	__le32	OIMR;	    /*	1334h  | 34h | Outbound Interrupt 
+	__le32	OIMR;	    /*	1334h  | 34h | Outbound Interrupt
 						Mask Register */
 	__le32	reserved2;  /*	1338h  | 38h | Reserved */
 	__le32	reserved3;  /*	133Ch  | 3Ch | Reserved */
 	__le32	InboundQueue;/*	1340h  | 40h | Inbound Queue Port relative to firmware */
 	__le32	OutboundQueue;/*1344h  | 44h | Outbound Queue Port relative to firmware */
-			    /* * Must access through ATU Inbound 
-			     	 Translation Window */
+			    /* * Must access through ATU Inbound
+				 Translation Window */
 };
 
 struct rx_inbound {
@@ -716,12 +712,12 @@ struct rkt_registers {
 typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
 
 struct aac_fib_context {
-	s16	 		type;		// used for verification of structure	
-	s16	 		size;
+	s16			type;		// used for verification of structure
+	s16			size;
 	u32			unique;		// unique value representing this context
 	ulong			jiffies;	// used for cleanup - dmb changed to ulong
 	struct list_head	next;		// used to link context's into a linked list
-	struct semaphore 	wait_sem;	// this is used to wait for the next fib to arrive.
+	struct semaphore	wait_sem;	// this is used to wait for the next fib to arrive.
 	int			wait;		// Set to true when thread is in WaitForSingleObject
 	unsigned long		count;		// total number of FIBs on FibList
 	struct list_head	fib_list;	// this holds fibs and their attachd hw_fibs
@@ -740,9 +736,9 @@ struct sense_data {
 	u8 EOM:1;		/* End Of Medium - reserved for random access devices */
 	u8 filemark:1;		/* Filemark - reserved for random access devices */
 
-	u8 information[4];	/* for direct-access devices, contains the unsigned 
-				 * logical block address or residue associated with 
-				 * the sense key 
+	u8 information[4];	/* for direct-access devices, contains the unsigned
+				 * logical block address or residue associated with
+				 * the sense key
 				 */
 	u8 add_sense_len;	/* number of additional sense bytes to follow this field */
 	u8 cmnd_info[4];	/* not used */
@@ -752,7 +748,7 @@ struct sense_data {
 	u8 bit_ptr:3;		/* indicates which byte of the CDB or parameter data
 				 * was in error
 				 */
-	u8 BPV:1;		/* bit pointer valid (BPV): 1- indicates that 
+	u8 BPV:1;		/* bit pointer valid (BPV): 1- indicates that
 				 * the bit_ptr field has valid value
 				 */
 	u8 reserved2:2;
@@ -786,24 +782,24 @@ struct fib {
 	/*
 	 *	The Adapter that this I/O is destined for.
 	 */
-	struct aac_dev 		*dev;
+	struct aac_dev		*dev;
 	/*
 	 *	This is the event the sendfib routine will wait on if the
 	 *	caller did not pass one and this is synch io.
 	 */
-	struct semaphore 	event_wait;
+	struct semaphore	event_wait;
 	spinlock_t		event_lock;
 
 	u32			done;	/* gets set to 1 when fib is complete */
-	fib_callback 		callback;
-	void 			*callback_data;
+	fib_callback		callback;
+	void			*callback_data;
 	u32			flags; // u32 dmb was ulong
 	/*
 	 *	And for the internal issue/reply queues (we may be able
 	 *	to merge these two)
 	 */
 	struct list_head	fiblink;
-	void 			*data;
+	void			*data;
 	struct hw_fib		*hw_fib_va;		/* Actual shared object */
 	dma_addr_t		hw_fib_pa;		/* physical address of hw_fib*/
 };
@@ -813,7 +809,7 @@ struct fib {
  *
  *	This is returned by the RequestAdapterInfo block
  */
- 
+
 struct aac_adapter_info
 {
 	__le32	platform;
@@ -832,7 +828,7 @@ struct aac_adapter_info
 	__le32	biosrev;
 	__le32	biosbuild;
 	__le32	cluster;
-	__le32	clusterchannelmask; 
+	__le32	clusterchannelmask;
 	__le32	serial[2];
 	__le32	battery;
 	__le32	options;
@@ -922,13 +918,13 @@ struct aac_bus_info_response {
 #define AAC_OPT_HOST_TIME_FIB		cpu_to_le32(1<<4)
 #define AAC_OPT_RAID50			cpu_to_le32(1<<5)
 #define AAC_OPT_4GB_WINDOW		cpu_to_le32(1<<6)
-#define AAC_OPT_SCSI_UPGRADEABLE 	cpu_to_le32(1<<7)
+#define AAC_OPT_SCSI_UPGRADEABLE	cpu_to_le32(1<<7)
 #define AAC_OPT_SOFT_ERR_REPORT		cpu_to_le32(1<<8)
-#define AAC_OPT_SUPPORTED_RECONDITION 	cpu_to_le32(1<<9)
+#define AAC_OPT_SUPPORTED_RECONDITION	cpu_to_le32(1<<9)
 #define AAC_OPT_SGMAP_HOST64		cpu_to_le32(1<<10)
 #define AAC_OPT_ALARM			cpu_to_le32(1<<11)
 #define AAC_OPT_NONDASD			cpu_to_le32(1<<12)
-#define AAC_OPT_SCSI_MANAGED    	cpu_to_le32(1<<13)
+#define AAC_OPT_SCSI_MANAGED		cpu_to_le32(1<<13)
 #define AAC_OPT_RAID_SCSI_MODE		cpu_to_le32(1<<14)
 #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO	cpu_to_le32(1<<16)
 #define AAC_OPT_NEW_COMM		cpu_to_le32(1<<17)
@@ -948,7 +944,7 @@ struct aac_dev
 
 	/*
 	 *	Map for 128 fib objects (64k)
-	 */	
+	 */
 	dma_addr_t		hw_fib_pa;
 	struct hw_fib		*hw_fib_va;
 	struct hw_fib		*aif_base_va;
@@ -959,24 +955,24 @@ struct aac_dev
 
 	struct fib		*free_fib;
 	spinlock_t		fib_lock;
-	
+
 	struct aac_queue_block *queues;
 	/*
 	 *	The user API will use an IOCTL to register itself to receive
 	 *	FIBs from the adapter.  The following list is used to keep
 	 *	track of all the threads that have requested these FIBs.  The
-	 *	mutex is used to synchronize access to all data associated 
+	 *	mutex is used to synchronize access to all data associated
 	 *	with the adapter fibs.
 	 */
 	struct list_head	fib_list;
 
 	struct adapter_ops	a_ops;
 	unsigned long		fsrev;		/* Main driver's revision number */
-	
+
 	unsigned		base_size;	/* Size of mapped in region */
 	struct aac_init		*init;		/* Holds initialization info to communicate with adapter */
-	dma_addr_t		init_pa; 	/* Holds physical address of the init struct */
-	
+	dma_addr_t		init_pa;	/* Holds physical address of the init struct */
+
 	struct pci_dev		*pdev;		/* Our PCI interface */
 	void *			printfbuf;	/* pointer to buffer used for printf's from the adapter */
 	void *			comm_addr;	/* Base address of Comm area */
@@ -990,11 +986,11 @@ struct aac_dev
 	struct fsa_dev_info	*fsa_dev;
 	struct task_struct	*thread;
 	int			cardtype;
-	
+
 	/*
 	 *	The following is the device specific extension.
 	 */
-#if (!defined(AAC_MIN_FOOTPRINT_SIZE))
+#ifndef AAC_MIN_FOOTPRINT_SIZE
 #	define AAC_MIN_FOOTPRINT_SIZE 8192
 #endif
 	union
@@ -1015,7 +1011,7 @@ struct aac_dev
 	/* These are in adapter info but they are in the io flow so
 	 * lets break them out so we don't have to do an AND to check them
 	 */
-	u8			nondasd_support; 
+	u8			nondasd_support;
 	u8			cache_protected;
 	u8			dac_support;
 	u8			raid_scsi_mode;
@@ -1078,14 +1074,14 @@ struct aac_dev
 /*
  *	Define the command values
  */
- 
+
 #define		Null			0
-#define 	GetAttributes		1
-#define 	SetAttributes		2
-#define 	Lookup			3
-#define 	ReadLink		4
-#define 	Read			5
-#define 	Write			6
+#define		GetAttributes		1
+#define		SetAttributes		2
+#define		Lookup			3
+#define		ReadLink		4
+#define		Read			5
+#define		Write			6
 #define		Create			7
 #define		MakeDirectory		8
 #define		SymbolicLink		9
@@ -1181,19 +1177,19 @@ struct aac_dev
 
 struct aac_read
 {
-	__le32	 	command;
-	__le32 		cid;
-	__le32 		block;
-	__le32 		count;
+	__le32		command;
+	__le32		cid;
+	__le32		block;
+	__le32		count;
 	struct sgmap	sg;	// Must be last in struct because it is variable
 };
 
 struct aac_read64
 {
-	__le32	 	command;
-	__le16 		cid;
-	__le16 		sector_count;
-	__le32 		block;
+	__le32		command;
+	__le16		cid;
+	__le16		sector_count;
+	__le32		block;
 	__le16		pad;
 	__le16		flags;
 	struct sgmap64	sg;	// Must be last in struct because it is variable
@@ -1201,26 +1197,26 @@ struct aac_read64
 
 struct aac_read_reply
 {
-	__le32	 	status;
-	__le32 		count;
+	__le32		status;
+	__le32		count;
 };
 
 struct aac_write
 {
 	__le32		command;
-	__le32 		cid;
-	__le32 		block;
-	__le32 		count;
-	__le32	 	stable;	// Not used
+	__le32		cid;
+	__le32		block;
+	__le32		count;
+	__le32		stable;	// Not used
 	struct sgmap	sg;	// Must be last in struct because it is variable
 };
 
 struct aac_write64
 {
-	__le32	 	command;
-	__le16 		cid;
-	__le16 		sector_count;
-	__le32 		block;
+	__le32		command;
+	__le16		cid;
+	__le16		sector_count;
+	__le32		block;
 	__le16		pad;
 	__le16		flags;
 #define	IO_TYPE_WRITE 0x00000000
@@ -1231,7 +1227,7 @@ struct aac_write64
 struct aac_write_reply
 {
 	__le32		status;
-	__le32 		count;
+	__le32		count;
 	__le32		committed;
 };
 
@@ -1334,10 +1330,10 @@ struct aac_srb_reply
 #define		SRB_NoDataXfer		 0x0000
 #define		SRB_DisableDisconnect	 0x0004
 #define		SRB_DisableSynchTransfer 0x0008
-#define 	SRB_BypassFrozenQueue	 0x0010
+#define		SRB_BypassFrozenQueue	 0x0010
 #define		SRB_DisableAutosense	 0x0020
 #define		SRB_DataIn		 0x0040
-#define 	SRB_DataOut		 0x0080
+#define		SRB_DataOut		 0x0080
 
 /*
  * SRB Functions - set in aac_srb->function
@@ -1360,7 +1356,7 @@ struct aac_srb_reply
 #define	SRBF_RemoveDevice	0x0016
 #define	SRBF_DomainValidation	0x0017
 
-/* 
+/*
  * SRB SCSI Status - set in aac_srb->scsi_status
  */
 #define SRB_STATUS_PENDING                  0x00
@@ -1519,17 +1515,17 @@ struct aac_get_container_count_resp {
  */
 
 struct aac_mntent {
-	__le32    		oid;
+	__le32			oid;
 	u8			name[16];	/* if applicable */
 	struct creation_info	create_info;	/* if applicable */
 	__le32			capacity;
-	__le32			vol;    	/* substrate structure */
-	__le32			obj;	        /* FT_FILESYS, etc. */
-	__le32			state;		/* unready for mounting, 
+	__le32			vol;		/* substrate structure */
+	__le32			obj;		/* FT_FILESYS, etc. */
+	__le32			state;		/* unready for mounting,
 						   readonly, etc. */
-	union aac_contentinfo	fileinfo;	/* Info specific to content 
+	union aac_contentinfo	fileinfo;	/* Info specific to content
 						   manager (eg, filesystem) */
-	__le32			altoid;		/* != oid <==> snapshot or 
+	__le32			altoid;		/* != oid <==> snapshot or
 						   broken mirror exists */
 	__le32			capacityhigh;
 };
@@ -1546,7 +1542,7 @@ struct aac_query_mount {
 
 struct aac_mount {
 	__le32		status;
-	__le32	   	type;           /* should be same as that requested */
+	__le32		type;           /* should be same as that requested */
 	__le32		count;
 	struct aac_mntent mnt[1];
 };
@@ -1616,7 +1612,7 @@ struct aac_delete_disk {
 	u32	disknum;
 	u32	cnum;
 };
- 
+
 struct fib_ioctl
 {
 	u32	fibctx;
@@ -1630,10 +1626,10 @@ struct revision
 	__le32 version;
 	__le32 build;
 };
-	
+
 
 /*
- * 	Ugly - non Linux like ioctl coding for back compat.
+ *	Ugly - non Linux like ioctl coding for back compat.
  */
 
 #define CTL_CODE(function, method) (                 \
@@ -1641,7 +1637,7 @@ struct revision
 )
 
 /*
- *	Define the method codes for how buffers are passed for I/O and FS 
+ *	Define the method codes for how buffers are passed for I/O and FS
  *	controls
  */
 
@@ -1652,15 +1648,15 @@ struct revision
  *	Filesystem ioctls
  */
 
-#define FSACTL_SENDFIB                  	CTL_CODE(2050, METHOD_BUFFERED)
-#define FSACTL_SEND_RAW_SRB               	CTL_CODE(2067, METHOD_BUFFERED)
+#define FSACTL_SENDFIB				CTL_CODE(2050, METHOD_BUFFERED)
+#define FSACTL_SEND_RAW_SRB			CTL_CODE(2067, METHOD_BUFFERED)
 #define FSACTL_DELETE_DISK			0x163
 #define FSACTL_QUERY_DISK			0x173
 #define FSACTL_OPEN_GET_ADAPTER_FIB		CTL_CODE(2100, METHOD_BUFFERED)
 #define FSACTL_GET_NEXT_ADAPTER_FIB		CTL_CODE(2101, METHOD_BUFFERED)
 #define FSACTL_CLOSE_GET_ADAPTER_FIB		CTL_CODE(2102, METHOD_BUFFERED)
 #define FSACTL_MINIPORT_REV_CHECK               CTL_CODE(2107, METHOD_BUFFERED)
-#define FSACTL_GET_PCI_INFO               	CTL_CODE(2119, METHOD_BUFFERED)
+#define FSACTL_GET_PCI_INFO			CTL_CODE(2119, METHOD_BUFFERED)
 #define FSACTL_FORCE_DELETE_DISK		CTL_CODE(2120, METHOD_NEITHER)
 #define FSACTL_GET_CONTAINERS			2131
 #define FSACTL_SEND_LARGE_FIB			CTL_CODE(2138, METHOD_BUFFERED)
@@ -1669,7 +1665,7 @@ struct revision
 struct aac_common
 {
 	/*
-	 *	If this value is set to 1 then interrupt moderation will occur 
+	 *	If this value is set to 1 then interrupt moderation will occur
 	 *	in the base commuication support.
 	 */
 	u32 irq_mod;
@@ -1698,11 +1694,11 @@ extern struct aac_common aac_config;
  *	The following macro is used when sending and receiving FIBs. It is
  *	only used for debugging.
  */
- 
+
 #ifdef DBG
 #define	FIB_COUNTER_INCREMENT(counter)		(counter)++
 #else
-#define	FIB_COUNTER_INCREMENT(counter)		
+#define	FIB_COUNTER_INCREMENT(counter)
 #endif
 
 /*
@@ -1734,17 +1730,17 @@ extern struct aac_common aac_config;
  *
  *	The adapter reports is present state through the phase.  Only
  *	a single phase should be ever be set.  Each phase can have multiple
- *	phase status bits to provide more detailed information about the 
- *	state of the board.  Care should be taken to ensure that any phase 
+ *	phase status bits to provide more detailed information about the
+ *	state of the board.  Care should be taken to ensure that any phase
  *	status bits that are set when changing the phase are also valid
  *	for the new phase or be cleared out.  Adapter software (monitor,
- *	iflash, kernel) is responsible for properly maintining the phase 
+ *	iflash, kernel) is responsible for properly maintining the phase
  *	status mailbox when it is running.
- *											
- *	MONKER_API Phases							
  *
- *	Phases are bit oriented.  It is NOT valid  to have multiple bits set						
- */					
+ *	MONKER_API Phases
+ *
+ *	Phases are bit oriented.  It is NOT valid  to have multiple bits set
+ */
 
 #define	SELF_TEST_FAILED		0x00000004
 #define	MONITOR_PANIC			0x00000020
@@ -1767,8 +1763,8 @@ extern struct aac_common aac_config;
  *	For FIB communication, we need all of the following things
  *	to send back to the user.
  */
- 
-#define 	AifCmdEventNotify	1	/* Notify of event */
+
+#define		AifCmdEventNotify	1	/* Notify of event */
 #define			AifEnConfigChange	3	/* Adapter configuration change */
 #define			AifEnContainerChange	4	/* Container configuration change */
 #define			AifEnDeviceFailure	5	/* SCSI device failed */
@@ -1792,11 +1788,11 @@ extern struct aac_common aac_config;
 #define			AifDenVolumeExtendComplete 201 /* A volume extend completed */
 #define		AifReqJobList		100	/* Gets back complete job list */
 #define		AifReqJobsForCtr	101	/* Gets back jobs for specific container */
-#define		AifReqJobsForScsi	102	/* Gets back jobs for specific SCSI device */ 
-#define		AifReqJobReport		103	/* Gets back a specific job report or list of them */ 
+#define		AifReqJobsForScsi	102	/* Gets back jobs for specific SCSI device */
+#define		AifReqJobReport		103	/* Gets back a specific job report or list of them */
 #define		AifReqTerminateJob	104	/* Terminates job */
 #define		AifReqSuspendJob	105	/* Suspends a job */
-#define		AifReqResumeJob		106	/* Resumes a job */ 
+#define		AifReqResumeJob		106	/* Resumes a job */
 #define		AifReqSendAPIReport	107	/* API generic report requests */
 #define		AifReqAPIJobStart	108	/* Start a job from the API */
 #define		AifReqAPIJobUpdate	109	/* Update a job report from the API */
@@ -1815,8 +1811,8 @@ struct aac_aifcmd {
 };
 
 /**
- * 	Convert capacity to cylinders
- *  	accounting for the fact capacity could be a 64 bit value
+ *	Convert capacity to cylinders
+ *	accounting for the fact capacity could be a 64 bit value
  *
  */
 static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)