[SCSI] aacraid: Reset adapter in recovery timeout

Received from Mark Salyzyn

If the adapter is in blinkled (Firmware Assert) when error recovery
timeout actions have been triggered, perform an adapter warm reset and
restart the initialization.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 258 insertions, 0 deletions

diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index c67da1321133..53add53be0bd 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -40,8 +40,10 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
+#include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
 #include <asm/semaphore.h>
 
 #include "aacraid.h"
@@ -1054,6 +1056,262 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 
 }
 
+static int _aac_reset_adapter(struct aac_dev *aac)
+{
+	int index, quirks;
+	u32 ret;
+	int retval;
+	struct Scsi_Host *host;
+	struct scsi_device *dev;
+	struct scsi_cmnd *command;
+	struct scsi_cmnd *command_list;
+
+	/*
+	 * Assumptions:
+	 *	- host is locked.
+	 *	- in_reset is asserted, so no new i/o is getting to the
+	 *	  card.
+	 *	- The card is dead.
+	 */
+	host = aac->scsi_host_ptr;
+	scsi_block_requests(host);
+	aac_adapter_disable_int(aac);
+	spin_unlock_irq(host->host_lock);
+	kthread_stop(aac->thread);
+
+	/*
+	 *	If a positive health, means in a known DEAD PANIC
+	 * state and the adapter could be reset to `try again'.
+	 */
+	retval = aac_adapter_check_health(aac);
+	if (retval == 0)
+		retval = aac_adapter_sync_cmd(aac, IOP_RESET_ALWAYS,
+		  0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
+	if (retval)
+		retval = aac_adapter_sync_cmd(aac, IOP_RESET,
+		  0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
+
+	if (retval)
+		goto out;
+	if (ret != 0x00000001) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	index = aac->cardtype;
+
+	/*
+	 * Re-initialize the adapter, first free resources, then carefully
+	 * apply the initialization sequence to come back again. Only risk
+	 * is a change in Firmware dropping cache, it is assumed the caller
+	 * will ensure that i/o is queisced and the card is flushed in that
+	 * case.
+	 */
+	aac_fib_map_free(aac);
+	aac->hw_fib_va = NULL;
+	aac->hw_fib_pa = 0;
+	pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
+	aac->comm_addr = NULL;
+	aac->comm_phys = 0;
+	kfree(aac->queues);
+	aac->queues = NULL;
+	free_irq(aac->pdev->irq, aac);
+	kfree(aac->fsa_dev);
+	aac->fsa_dev = NULL;
+	if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) {
+		if (((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) ||
+		  ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_32BIT_MASK))))
+			goto out;
+	} else {
+		if (((retval = pci_set_dma_mask(aac->pdev, 0x7FFFFFFFULL))) ||
+		  ((retval = pci_set_consistent_dma_mask(aac->pdev, 0x7FFFFFFFULL))))
+			goto out;
+	}
+	if ((retval = (*(aac_get_driver_ident(index)->init))(aac)))
+		goto out;
+	if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT)
+		if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK)))
+			goto out;
+	aac->thread = kthread_run(aac_command_thread, aac, aac->name);
+	if (IS_ERR(aac->thread)) {
+		retval = PTR_ERR(aac->thread);
+		goto out;
+	}
+	(void)aac_get_adapter_info(aac);
+	quirks = aac_get_driver_ident(index)->quirks;
+	if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) {
+ 		host->sg_tablesize = 34;
+ 		host->max_sectors = (host->sg_tablesize * 8) + 112;
+ 	}
+ 	if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) {
+ 		host->sg_tablesize = 17;
+ 		host->max_sectors = (host->sg_tablesize * 8) + 112;
+ 	}
+	aac_get_config_status(aac, 1);
+	aac_get_containers(aac);
+	/*
+	 * This is where the assumption that the Adapter is quiesced
+	 * is important.
+	 */
+	command_list = NULL;
+	__shost_for_each_device(dev, host) {
+		unsigned long flags;
+		spin_lock_irqsave(&dev->list_lock, flags);
+		list_for_each_entry(command, &dev->cmd_list, list)
+			if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
+				command->SCp.buffer = (struct scatterlist *)command_list;
+				command_list = command;
+			}
+		spin_unlock_irqrestore(&dev->list_lock, flags);
+	}
+	while ((command = command_list)) {
+		command_list = (struct scsi_cmnd *)command->SCp.buffer;
+		command->SCp.buffer = NULL;
+		command->result = DID_OK << 16
+		  | COMMAND_COMPLETE << 8
+		  | SAM_STAT_TASK_SET_FULL;
+		command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
+		command->scsi_done(command);
+	}
+	retval = 0;
+
+out:
+	aac->in_reset = 0;
+	scsi_unblock_requests(host);
+	spin_lock_irq(host->host_lock);
+	return retval;
+}
+
+int aac_check_health(struct aac_dev * aac)
+{
+	int BlinkLED;
+	unsigned long time_now, flagv = 0;
+	struct list_head * entry;
+	struct Scsi_Host * host;
+
+	/* Extending the scope of fib_lock slightly to protect aac->in_reset */
+	if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
+		return 0;
+
+	if (aac->in_reset || !(BlinkLED = aac_adapter_check_health(aac))) {
+		spin_unlock_irqrestore(&aac->fib_lock, flagv);
+		return 0; /* OK */
+	}
+
+	aac->in_reset = 1;
+
+	/* Fake up an AIF:
+	 *	aac_aifcmd.command = AifCmdEventNotify = 1
+	 *	aac_aifcmd.seqnum = 0xFFFFFFFF
+	 *	aac_aifcmd.data[0] = AifEnExpEvent = 23
+	 *	aac_aifcmd.data[1] = AifExeFirmwarePanic = 3
+	 *	aac.aifcmd.data[2] = AifHighPriority = 3
+	 *	aac.aifcmd.data[3] = BlinkLED
+	 */
+
+	time_now = jiffies/HZ;
+	entry = aac->fib_list.next;
+
+	/*
+	 * For each Context that is on the
+	 * fibctxList, make a copy of the
+	 * fib, and then set the event to wake up the
+	 * thread that is waiting for it.
+	 */
+	while (entry != &aac->fib_list) {
+		/*
+		 * Extract the fibctx
+		 */
+		struct aac_fib_context *fibctx = list_entry(entry, struct aac_fib_context, next);
+		struct hw_fib * hw_fib;
+		struct fib * fib;
+		/*
+		 * Check if the queue is getting
+		 * backlogged
+		 */
+		if (fibctx->count > 20) {
+			/*
+			 * It's *not* jiffies folks,
+			 * but jiffies / HZ, so do not
+			 * panic ...
+			 */
+			u32 time_last = fibctx->jiffies;
+			/*
+			 * Has it been > 2 minutes
+			 * since the last read off
+			 * the queue?
+			 */
+			if ((time_now - time_last) > aif_timeout) {
+				entry = entry->next;
+				aac_close_fib_context(aac, fibctx);
+				continue;
+			}
+		}
+		/*
+		 * Warning: no sleep allowed while
+		 * holding spinlock
+		 */
+		hw_fib = kmalloc(sizeof(struct hw_fib), GFP_ATOMIC);
+		fib = kmalloc(sizeof(struct fib), GFP_ATOMIC);
+		if (fib && hw_fib) {
+			struct aac_aifcmd * aif;
+
+			memset(hw_fib, 0, sizeof(struct hw_fib));
+			memset(fib, 0, sizeof(struct fib));
+			fib->hw_fib = hw_fib;
+			fib->dev = aac;
+			aac_fib_init(fib);
+			fib->type = FSAFS_NTC_FIB_CONTEXT;
+			fib->size = sizeof (struct fib);
+			fib->data = hw_fib->data;
+			aif = (struct aac_aifcmd *)hw_fib->data;
+			aif->command = cpu_to_le32(AifCmdEventNotify);
+		 	aif->seqnum = cpu_to_le32(0xFFFFFFFF);
+		 	aif->data[0] = cpu_to_le32(AifEnExpEvent);
+			aif->data[1] = cpu_to_le32(AifExeFirmwarePanic);
+		 	aif->data[2] = cpu_to_le32(AifHighPriority);
+			aif->data[3] = cpu_to_le32(BlinkLED);
+
+			/*
+			 * Put the FIB onto the
+			 * fibctx's fibs
+			 */
+			list_add_tail(&fib->fiblink, &fibctx->fib_list);
+			fibctx->count++;
+			/*
+			 * Set the event to wake up the
+			 * thread that will waiting.
+			 */
+			up(&fibctx->wait_sem);
+		} else {
+			printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
+			kfree(fib);
+			kfree(hw_fib);
+		}
+		entry = entry->next;
+	}
+
+	spin_unlock_irqrestore(&aac->fib_lock, flagv);
+
+	if (BlinkLED < 0) {
+		printk(KERN_ERR "%s: Host adapter dead %d\n", aac->name, BlinkLED);
+		goto out;
+	}
+
+	printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
+
+	host = aac->scsi_host_ptr;
+	spin_lock_irqsave(host->host_lock, flagv);
+	BlinkLED = _aac_reset_adapter(aac);
+	spin_unlock_irqrestore(host->host_lock, flagv);
+	return BlinkLED;
+
+out:
+	aac->in_reset = 0;
+	return BlinkLED;
+}
+
+
 /**
  *	aac_command_thread	-	command processing thread
  *	@dev: Adapter to monitor