Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 749 insertions, 0 deletions

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
new file mode 100644
index 000000000000..c9b82687ba1a
--- /dev/null
+++ b/drivers/scsi/aacraid/linit.c
@@ -0,0 +1,749 @@
+/*
+ *	Adaptec AAC series RAID controller driver
+ *	(c) Copyright 2001 Red Hat Inc.	<alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ *   linit.c
+ *
+ * Abstract: Linux Driver entry module for Adaptec RAID Array Controller
+ */
+
+#define AAC_DRIVER_VERSION		"1.1.2-lk2"
+#define AAC_DRIVER_BUILD_DATE		__DATE__
+#define AAC_DRIVERNAME			"aacraid"
+
+#include <linux/compat.h>
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/syscalls.h>
+#include <linux/ioctl32.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <asm/semaphore.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsicam.h>
+#include <scsi/scsi_eh.h>
+
+#include "aacraid.h"
+
+
+MODULE_AUTHOR("Red Hat Inc and Adaptec");
+MODULE_DESCRIPTION("Dell PERC2, 2/Si, 3/Si, 3/Di, "
+		   "Adaptec Advanced Raid Products, "
+		   "and HP NetRAID-4M SCSI driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(AAC_DRIVER_VERSION);
+
+static LIST_HEAD(aac_devices);
+static int aac_cfg_major = -1;
+
+/*
+ * Because of the way Linux names scsi devices, the order in this table has
+ * become important.  Check for on-board Raid first, add-in cards second.
+ *
+ * Note: The last field is used to index into aac_drivers below.
+ */
+static struct pci_device_id aac_pci_tbl[] = {
+	{ 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */
+	{ 0x1028, 0x0002, 0x1028, 0x0002, 0, 0, 1 }, /* PERC 3/Di (Opal/PERC3Di) */
+	{ 0x1028, 0x0003, 0x1028, 0x0003, 0, 0, 2 }, /* PERC 3/Si (SlimFast/PERC3Si */
+	{ 0x1028, 0x0004, 0x1028, 0x00d0, 0, 0, 3 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
+	{ 0x1028, 0x0002, 0x1028, 0x00d1, 0, 0, 4 }, /* PERC 3/Di (Viper/PERC3DiV) */
+	{ 0x1028, 0x0002, 0x1028, 0x00d9, 0, 0, 5 }, /* PERC 3/Di (Lexus/PERC3DiL) */
+	{ 0x1028, 0x000a, 0x1028, 0x0106, 0, 0, 6 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
+	{ 0x1028, 0x000a, 0x1028, 0x011b, 0, 0, 7 }, /* PERC 3/Di (Dagger/PERC3DiD) */
+	{ 0x1028, 0x000a, 0x1028, 0x0121, 0, 0, 8 }, /* PERC 3/Di (Boxster/PERC3DiB) */
+	{ 0x9005, 0x0283, 0x9005, 0x0283, 0, 0, 9 }, /* catapult */
+	{ 0x9005, 0x0284, 0x9005, 0x0284, 0, 0, 10 }, /* tomcat */
+	{ 0x9005, 0x0285, 0x9005, 0x0286, 0, 0, 11 }, /* Adaptec 2120S (Crusader) */
+	{ 0x9005, 0x0285, 0x9005, 0x0285, 0, 0, 12 }, /* Adaptec 2200S (Vulcan) */
+	{ 0x9005, 0x0285, 0x9005, 0x0287, 0, 0, 13 }, /* Adaptec 2200S (Vulcan-2m) */
+	{ 0x9005, 0x0285, 0x17aa, 0x0286, 0, 0, 14 }, /* Legend S220 (Legend Crusader) */
+	{ 0x9005, 0x0285, 0x17aa, 0x0287, 0, 0, 15 }, /* Legend S230 (Legend Vulcan) */
+
+	{ 0x9005, 0x0285, 0x9005, 0x0288, 0, 0, 16 }, /* Adaptec 3230S (Harrier) */
+	{ 0x9005, 0x0285, 0x9005, 0x0289, 0, 0, 17 }, /* Adaptec 3240S (Tornado) */
+	{ 0x9005, 0x0285, 0x9005, 0x028a, 0, 0, 18 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
+	{ 0x9005, 0x0285, 0x9005, 0x028b, 0, 0, 19 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
+	{ 0x9005, 0x0286, 0x9005, 0x028c, 0, 0, 20 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x028d, 0, 0, 21 }, /* ASR-2130S (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
+	{ 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
+	{ 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
+	{ 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 25 }, /* Callisto Jupiter Platform */
+	{ 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 26 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
+	{ 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 27 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
+	{ 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 28 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
+	{ 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 29 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
+	{ 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 30 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
+	{ 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 31 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
+	{ 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 32 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
+	{ 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 33 }, /* AAR-2610SA PCI SATA 6ch */
+	{ 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 34 }, /* ASR-2240S (SabreExpress) */
+	{ 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 35 }, /* ASR-4005SAS */
+	{ 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 36 }, /* IBM 8i (AvonPark) */
+	{ 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 37 }, /* ASR-4000SAS (BlackBird) */
+	{ 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 38 }, /* ASR-4800SAS (Marauder-X) */
+	{ 0x9005, 0x0285, 0x9005, 0x029A, 0, 0, 39 }, /* ASR-4805SAS (Marauder-E) */
+
+	{ 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 40 }, /* Perc 320/DC*/
+	{ 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 41 }, /* Adaptec 5400S (Mustang)*/
+	{ 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 42 }, /* Adaptec 5400S (Mustang)*/
+	{ 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 43 }, /* Dell PERC2/QC */
+	{ 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 44 }, /* HP NetRAID-4M */
+
+	{ 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 45 }, /* Dell Catchall */
+	{ 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 46 }, /* Legend Catchall */
+	{ 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 47 }, /* Adaptec Catch All */
+	{ 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 48 }, /* Adaptec Rocket Catch All */
+	{ 0,}
+};
+MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
+
+/*
+ * dmb - For now we add the number of channels to this structure.  
+ * In the future we should add a fib that reports the number of channels
+ * for the card.  At that time we can remove the channels from here
+ */
+static struct aac_driver_ident aac_drivers[] = {
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 2/Si (Iguana/PERC2Si) */
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Opal/PERC3Di) */
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Si (SlimFast/PERC3Si */
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Viper/PERC3DiV) */
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Lexus/PERC3DiL) */
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Dagger/PERC3DiD) */
+	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Boxster/PERC3DiB) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "catapult        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* catapult */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "tomcat          ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* tomcat */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan-2m) */
+	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S220     ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S220 (Legend Crusader) */
+	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S230     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S230 (Legend Vulcan) */
+
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 3230S   ", 2 }, /* Adaptec 3230S (Harrier) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 3240S   ", 2 }, /* Adaptec 3240S (Tornado) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2020ZCR     ", 2 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2025ZCR     ", 2 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
+	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-2230S PCI-X ", 2 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-2130S PCI-X ", 1 }, /* ASR-2130S (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2820SA      ", 1 }, /* AAR-2820SA (Intruder) */
+	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2620SA      ", 1 }, /* AAR-2620SA (Intruder) */
+	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2420SA      ", 1 }, /* AAR-2420SA (Intruder) */
+	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "Callisto        ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2020SA       ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2025SA       ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2410SA SATA ", 1 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
+	{ aac_rx_init, "aacraid",  "DELL    ", "CERC SR2        ", 1 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2810SA SATA ", 1 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-21610SA SATA", 1 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2026ZCR     ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2610SA      ", 1 }, /* SATA 6Ch (Bearcat) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2240S       ", 1 }, /* ASR-2240S (SabreExpress) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4005SAS     ", 1 }, /* ASR-4005SAS */
+	{ aac_rx_init, "aacraid",  "IBM     ", "ServeRAID 8i    ", 1 }, /* IBM 8i (AvonPark) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4000SAS     ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4800SAS     ", 1 }, /* ASR-4800SAS (Marauder-X) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4805SAS     ", 1 }, /* ASR-4805SAS (Marauder-E) */
+
+	{ aac_rx_init, "percraid", "DELL    ", "PERC 320/DC     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
+	{ aac_sa_init, "aacraid",  "ADAPTEC ", "Adaptec 5400S   ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
+	{ aac_sa_init, "aacraid",  "ADAPTEC ", "AAC-364         ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
+	{ aac_sa_init, "percraid", "DELL    ", "PERCRAID        ", 4, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell PERC2/QC */
+	{ aac_sa_init, "hpnraid",  "HP      ", "NetRAID         ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */
+
+	{ aac_rx_init, "aacraid",  "DELL    ", "RAID            ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell Catchall */
+	{ aac_rx_init, "aacraid",  "Legend  ", "RAID            ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend Catchall */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "RAID            ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec Catch All */
+	{ aac_rkt_init, "aacraid", "ADAPTEC ", "RAID            ", 2 } /* Adaptec Rocket Catch All */
+};
+
+/**
+ *	aac_queuecommand	-	queue a SCSI command
+ *	@cmd:		SCSI command to queue
+ *	@done:		Function to call on command completion
+ *
+ *	Queues a command for execution by the associated Host Adapter.
+ *
+ *	TODO: unify with aac_scsi_cmd().
+ */ 
+
+static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+{
+	cmd->scsi_done = done;
+	return (aac_scsi_cmd(cmd) ? FAILED : 0);
+} 
+
+/**
+ *	aac_info		-	Returns the host adapter name
+ *	@shost:		Scsi host to report on
+ *
+ *	Returns a static string describing the device in question
+ */
+
+const char *aac_info(struct Scsi_Host *shost)
+{
+	struct aac_dev *dev = (struct aac_dev *)shost->hostdata;
+	return aac_drivers[dev->cardtype].name;
+}
+
+/**
+ *	aac_get_driver_ident
+ * 	@devtype: index into lookup table
+ *
+ * 	Returns a pointer to the entry in the driver lookup table.
+ */
+
+struct aac_driver_ident* aac_get_driver_ident(int devtype)
+{
+	return &aac_drivers[devtype];
+}
+
+/**
+ *	aac_biosparm	-	return BIOS parameters for disk
+ *	@sdev: The scsi device corresponding to the disk
+ *	@bdev: the block device corresponding to the disk
+ *	@capacity: the sector capacity of the disk
+ *	@geom: geometry block to fill in
+ *
+ *	Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk.  
+ *	The default disk geometry is 64 heads, 32 sectors, and the appropriate 
+ *	number of cylinders so as not to exceed drive capacity.  In order for 
+ *	disks equal to or larger than 1 GB to be addressable by the BIOS
+ *	without exceeding the BIOS limitation of 1024 cylinders, Extended 
+ *	Translation should be enabled.   With Extended Translation enabled, 
+ *	drives between 1 GB inclusive and 2 GB exclusive are given a disk 
+ *	geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive 
+ *	are given a disk geometry of 255 heads and 63 sectors.  However, if 
+ *	the BIOS detects that the Extended Translation setting does not match 
+ *	the geometry in the partition table, then the translation inferred 
+ *	from the partition table will be used by the BIOS, and a warning may 
+ *	be displayed.
+ */
+ 
+static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
+			sector_t capacity, int *geom)
+{
+	struct diskparm *param = (struct diskparm *)geom;
+	unsigned char *buf;
+
+	dprintk((KERN_DEBUG "aac_biosparm.\n"));
+
+	/*
+	 *	Assuming extended translation is enabled - #REVISIT#
+	 */
+	if (capacity >= 2 * 1024 * 1024) { /* 1 GB in 512 byte sectors */
+		if(capacity >= 4 * 1024 * 1024) { /* 2 GB in 512 byte sectors */
+			param->heads = 255;
+			param->sectors = 63;
+		} else {
+			param->heads = 128;
+			param->sectors = 32;
+		}
+	} else {
+		param->heads = 64;
+		param->sectors = 32;
+	}
+
+	param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
+
+	/* 
+	 *	Read the first 1024 bytes from the disk device, if the boot
+	 *	sector partition table is valid, search for a partition table
+	 *	entry whose end_head matches one of the standard geometry 
+	 *	translations ( 64/32, 128/32, 255/63 ).
+	 */
+	buf = scsi_bios_ptable(bdev);
+	if(*(unsigned short *)(buf + 0x40) == cpu_to_le16(0xaa55)) {
+		struct partition *first = (struct partition * )buf;
+		struct partition *entry = first;
+		int saved_cylinders = param->cylinders;
+		int num;
+		unsigned char end_head, end_sec;
+
+		for(num = 0; num < 4; num++) {
+			end_head = entry->end_head;
+			end_sec = entry->end_sector & 0x3f;
+
+			if(end_head == 63) {
+				param->heads = 64;
+				param->sectors = 32;
+				break;
+			} else if(end_head == 127) {
+				param->heads = 128;
+				param->sectors = 32;
+				break;
+			} else if(end_head == 254) {
+				param->heads = 255;
+				param->sectors = 63;
+				break;
+			}
+			entry++;
+		}
+
+		if (num == 4) {
+			end_head = first->end_head;
+			end_sec = first->end_sector & 0x3f;
+		}
+
+		param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
+		if (num < 4 && end_sec == param->sectors) {
+			if (param->cylinders != saved_cylinders)
+				dprintk((KERN_DEBUG "Adopting geometry: heads=%d, sectors=%d from partition table %d.\n",
+					param->heads, param->sectors, num));
+		} else if (end_head > 0 || end_sec > 0) {
+			dprintk((KERN_DEBUG "Strange geometry: heads=%d, sectors=%d in partition table %d.\n",
+				end_head + 1, end_sec, num));
+			dprintk((KERN_DEBUG "Using geometry: heads=%d, sectors=%d.\n",
+					param->heads, param->sectors));
+		}
+	}
+	kfree(buf);
+	return 0;
+}
+
+/**
+ *	aac_slave_configure		-	compute queue depths
+ *	@sdev:	SCSI device we are considering
+ *
+ *	Selects queue depths for each target device based on the host adapter's
+ *	total capacity and the queue depth supported by the target device.
+ *	A queue depth of one automatically disables tagged queueing.
+ */
+
+static int aac_slave_configure(struct scsi_device *sdev)
+{
+	if (sdev->tagged_supported)
+		scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, 128);
+	else
+		scsi_adjust_queue_depth(sdev, 0, 1);
+	return 0;
+}
+
+static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg)
+{
+	struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+	return aac_do_ioctl(dev, cmd, arg);
+}
+
+/*
+ * XXX: does aac really need no error handling??
+ */
+static int aac_eh_abort(struct scsi_cmnd *cmd)
+{
+	return FAILED;
+}
+
+/*
+ *	aac_eh_reset	- Reset command handling
+ *	@scsi_cmd:	SCSI command block causing the reset
+ *
+ */
+static int aac_eh_reset(struct scsi_cmnd* cmd)
+{
+	struct scsi_device * dev = cmd->device;
+	struct Scsi_Host * host = dev->host;
+	struct scsi_cmnd * command;
+	int count;
+	struct aac_dev * aac;
+	unsigned long flags;
+
+	printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", 
+					AAC_DRIVERNAME);
+
+
+	aac = (struct aac_dev *)host->hostdata;
+	if (aac_adapter_check_health(aac)) {
+		printk(KERN_ERR "%s: Host adapter appears dead\n", 
+				AAC_DRIVERNAME);
+		return -ENODEV;
+	}
+	/*
+	 * Wait for all commands to complete to this specific
+	 * target (block maximum 60 seconds).
+	 */
+	for (count = 60; count; --count) {
+		int active = 0;
+		__shost_for_each_device(dev, host) {
+			spin_lock_irqsave(&dev->list_lock, flags);
+			list_for_each_entry(command, &dev->cmd_list, list) {
+				if (command->serial_number) {
+					active++;
+					break;
+				}
+			}
+			spin_unlock_irqrestore(&dev->list_lock, flags);
+			if (active)
+				break;
+
+		}
+		/*
+		 * We can exit If all the commands are complete
+		 */
+		if (active == 0)
+			return SUCCESS;
+		spin_unlock_irq(host->host_lock);
+		ssleep(1);
+		spin_lock_irq(host->host_lock);
+	}
+	printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
+	return -ETIMEDOUT;
+}
+
+/**
+ *	aac_cfg_open		-	open a configuration file
+ *	@inode: inode being opened
+ *	@file: file handle attached
+ *
+ *	Called when the configuration device is opened. Does the needed
+ *	set up on the handle and then returns
+ *
+ *	Bugs: This needs extending to check a given adapter is present
+ *	so we can support hot plugging, and to ref count adapters.
+ */
+
+static int aac_cfg_open(struct inode *inode, struct file *file)
+{
+	struct aac_dev *aac;
+	unsigned minor = iminor(inode);
+	int err = -ENODEV;
+
+	list_for_each_entry(aac, &aac_devices, entry) {
+		if (aac->id == minor) {
+			file->private_data = aac;
+			err = 0;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	aac_cfg_ioctl		-	AAC configuration request
+ *	@inode: inode of device
+ *	@file: file handle
+ *	@cmd: ioctl command code
+ *	@arg: argument
+ *
+ *	Handles a configuration ioctl. Currently this involves wrapping it
+ *	up and feeding it into the nasty windowsalike glue layer.
+ *
+ *	Bugs: Needs locking against parallel ioctls lower down
+ *	Bugs: Needs to handle hot plugging
+ */
+ 
+static int aac_cfg_ioctl(struct inode *inode,  struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
+}
+
+#ifdef CONFIG_COMPAT
+static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long arg)
+{
+	long ret;
+	lock_kernel();
+	switch (cmd) { 
+	case FSACTL_MINIPORT_REV_CHECK:
+	case FSACTL_SENDFIB:
+	case FSACTL_OPEN_GET_ADAPTER_FIB:
+	case FSACTL_CLOSE_GET_ADAPTER_FIB:
+	case FSACTL_SEND_RAW_SRB:
+	case FSACTL_GET_PCI_INFO:
+	case FSACTL_QUERY_DISK:
+	case FSACTL_DELETE_DISK:
+	case FSACTL_FORCE_DELETE_DISK:
+	case FSACTL_GET_CONTAINERS: 
+		ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
+		break;
+
+	case FSACTL_GET_NEXT_ADAPTER_FIB: {
+		struct fib_ioctl __user *f;
+		
+		f = compat_alloc_user_space(sizeof(*f));
+		ret = 0;
+		if (clear_user(f, sizeof(*f) != sizeof(*f)))
+			ret = -EFAULT;
+		if (copy_in_user(f, (void __user *)arg, sizeof(struct fib_ioctl) - sizeof(u32)))
+			ret = -EFAULT;
+		if (!ret)
+			ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
+		break;
+	}
+
+	default:
+		ret = -ENOIOCTLCMD; 
+		break;
+	} 
+	unlock_kernel();
+	return ret;
+}
+
+static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
+{
+	struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+	return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg);
+}
+
+static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+	return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg);
+}
+#endif
+
+static struct file_operations aac_cfg_fops = {
+	.owner		= THIS_MODULE,
+	.ioctl		= aac_cfg_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl   = aac_compat_cfg_ioctl,
+#endif
+	.open		= aac_cfg_open,
+};
+
+static struct scsi_host_template aac_driver_template = {
+	.module				= THIS_MODULE,
+	.name           		= "AAC",
+	.proc_name			= "aacraid",
+	.info           		= aac_info,
+	.ioctl          		= aac_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl			= aac_compat_ioctl,
+#endif
+	.queuecommand   		= aac_queuecommand,
+	.bios_param     		= aac_biosparm,	
+	.slave_configure		= aac_slave_configure,
+	.eh_abort_handler		= aac_eh_abort,
+	.eh_host_reset_handler		= aac_eh_reset,
+	.can_queue      		= AAC_NUM_IO_FIB,	
+	.this_id        		= 16,
+	.sg_tablesize   		= 16,
+	.max_sectors    		= 128,
+#if (AAC_NUM_IO_FIB > 256)
+	.cmd_per_lun			= 256,
+#else		
+	.cmd_per_lun    		= AAC_NUM_IO_FIB, 
+#endif	
+	.use_clustering			= ENABLE_CLUSTERING,
+};
+
+
+static int __devinit aac_probe_one(struct pci_dev *pdev,
+		const struct pci_device_id *id)
+{
+	unsigned index = id->driver_data;
+	struct Scsi_Host *shost;
+	struct aac_dev *aac;
+	struct list_head *insert = &aac_devices;
+	int error = -ENODEV;
+	int unique_id = 0;
+
+	list_for_each_entry(aac, &aac_devices, entry) {
+		if (aac->id > unique_id)
+			break;
+		insert = &aac->entry;
+		unique_id++;
+	}
+
+	if (pci_enable_device(pdev))
+		goto out;
+
+	if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL) || 
+			pci_set_consistent_dma_mask(pdev, 0xFFFFFFFFULL))
+		goto out;
+	/*
+	 * If the quirk31 bit is set, the adapter needs adapter
+	 * to driver communication memory to be allocated below 2gig
+	 */
+	if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) 
+		if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
+				pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
+			goto out;
+	
+	pci_set_master(pdev);
+
+	shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev));
+	if (!shost)
+		goto out_disable_pdev;
+
+	shost->irq = pdev->irq;
+	shost->base = pci_resource_start(pdev, 0);
+	shost->unique_id = unique_id;
+
+	aac = (struct aac_dev *)shost->hostdata;
+	aac->scsi_host_ptr = shost;	
+	aac->pdev = pdev;
+	aac->name = aac_driver_template.name;
+	aac->id = shost->unique_id;
+	aac->cardtype =  index;
+	INIT_LIST_HEAD(&aac->entry);
+
+	aac->fibs = kmalloc(sizeof(struct fib) * AAC_NUM_FIB, GFP_KERNEL);
+	if (!aac->fibs)
+		goto out_free_host;
+	spin_lock_init(&aac->fib_lock);
+
+	if ((*aac_drivers[index].init)(aac))
+		goto out_free_fibs;
+
+	/*
+	 * If we had set a smaller DMA mask earlier, set it to 4gig
+	 * now since the adapter can dma data to at least a 4gig
+	 * address space.
+	 */
+	if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
+		if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL))
+			goto out_free_fibs;
+
+	aac_get_adapter_info(aac);
+
+	/*
+	 * max channel will be the physical channels plus 1 virtual channel
+	 * all containers are on the virtual channel 0
+	 * physical channels are address by their actual physical number+1
+	 */
+	if (aac->nondasd_support == 1)
+		shost->max_channel = aac_drivers[index].channels+1;
+	else
+		shost->max_channel = 1;
+
+	aac_get_config_status(aac);
+	aac_get_containers(aac);
+	list_add(&aac->entry, insert);
+
+	shost->max_id = aac->maximum_num_containers;
+	if (shost->max_id < MAXIMUM_NUM_CONTAINERS)
+		shost->max_id = MAXIMUM_NUM_CONTAINERS;
+	else
+		shost->this_id = shost->max_id;
+
+	/*
+	 * dmb - we may need to move the setting of these parms somewhere else once
+	 * we get a fib that can report the actual numbers
+	 */
+	shost->max_lun = AAC_MAX_LUN;
+
+	pci_set_drvdata(pdev, shost);
+
+	error = scsi_add_host(shost, &pdev->dev);
+	if (error)
+		goto out_deinit;
+	scsi_scan_host(shost);
+
+	return 0;
+
+out_deinit:
+	kill_proc(aac->thread_pid, SIGKILL, 0);
+	wait_for_completion(&aac->aif_completion);
+
+	aac_send_shutdown(aac);
+	fib_map_free(aac);
+	pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
+	kfree(aac->queues);
+	free_irq(pdev->irq, aac);
+	iounmap(aac->regs.sa);
+ out_free_fibs:
+	kfree(aac->fibs);
+	kfree(aac->fsa_dev);
+ out_free_host:
+	scsi_host_put(shost);
+ out_disable_pdev:
+	pci_disable_device(pdev);
+ out:
+	return error;
+}
+
+static void __devexit aac_remove_one(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+	scsi_remove_host(shost);
+
+	kill_proc(aac->thread_pid, SIGKILL, 0);
+	wait_for_completion(&aac->aif_completion);
+
+	aac_send_shutdown(aac);
+	fib_map_free(aac);
+	pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
+			aac->comm_phys);
+	kfree(aac->queues);
+
+	free_irq(pdev->irq, aac);
+	iounmap(aac->regs.sa);
+	
+	kfree(aac->fibs);
+	
+	list_del(&aac->entry);
+	scsi_host_put(shost);
+	pci_disable_device(pdev);
+}
+
+static struct pci_driver aac_pci_driver = {
+	.name		= AAC_DRIVERNAME,
+	.id_table	= aac_pci_tbl,
+	.probe		= aac_probe_one,
+	.remove		= __devexit_p(aac_remove_one),
+};
+
+static int __init aac_init(void)
+{
+	int error;
+	
+	printk(KERN_INFO "Red Hat/Adaptec aacraid driver (%s %s)\n",
+			AAC_DRIVER_VERSION, AAC_DRIVER_BUILD_DATE);
+
+	error = pci_module_init(&aac_pci_driver);
+	if (error)
+		return error;
+
+	aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops);
+	if (aac_cfg_major < 0) {
+		printk(KERN_WARNING
+		       "aacraid: unable to register \"aac\" device.\n");
+	}
+	return 0;
+}
+
+static void __exit aac_exit(void)
+{
+	unregister_chrdev(aac_cfg_major, "aac");
+	pci_unregister_driver(&aac_pci_driver);
+}
+
+module_init(aac_init);
+module_exit(aac_exit);