scsi: aacraid: Disabling TM path and only processing IOP reset

Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b
and -H flags.  Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in
aac_hba_send since iu_type, request_id and fib_flags are not populated.
Device and target reset handlers are made to send TMF commands only when
reset_state is 0.

Link: https://lore.kernel.org/r/1581553771-25796-1-git-send-email-Sagar.Biradar@microchip.com
Reviewed-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

2 files changed, 26 insertions, 10 deletions

diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index bb14a05f6d77..4725e4c763cf 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -729,7 +729,7 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
 		hbacmd->request_id =
 			cpu_to_le32((((u32)(fibptr - dev->fibs)) << 2) + 1);
 		fibptr->flags |= FIB_CONTEXT_FLAG_SCSI_CMD;
-	} else if (command != HBA_IU_TYPE_SCSI_TM_REQ)
+	} else
 		return -EINVAL;
 
 
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index d0d1f3072c0c..b1d133de29ab 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -733,7 +733,11 @@ static int aac_eh_abort(struct scsi_cmnd* cmd)
 		status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib,
 				  (fib_callback) aac_hba_callback,
 				  (void *) cmd);
-
+		if (status != -EINPROGRESS) {
+			aac_fib_complete(fib);
+			aac_fib_free(fib);
+			return ret;
+		}
 		/* Wait up to 15 secs for completion */
 		for (count = 0; count < 15; ++count) {
 			if (cmd->SCp.sent_command) {
@@ -912,11 +916,11 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host device reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -931,7 +935,12 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 	status = aac_hba_send(command, fib,
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
-
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state == 0) {
@@ -970,11 +979,11 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host target reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -991,6 +1000,13 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
 
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
+
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state <= 0) {
@@ -1043,7 +1059,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
 		}
 	}
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME);
+	pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME);
 
 	/*
 	 * Check the health of the controller