Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 151 insertions, 0 deletions

diff --git a/drivers/scsi/aha1542.h b/drivers/scsi/aha1542.h
new file mode 100644
index 000000000000..c402351dc79a
--- /dev/null
+++ b/drivers/scsi/aha1542.h
@@ -0,0 +1,151 @@
+#ifndef _AHA1542_H
+
+/* $Id: aha1542.h,v 1.1 1992/07/24 06:27:38 root Exp root $
+ *
+ * Header file for the adaptec 1542 driver for Linux
+ *
+ * $Log: aha1542.h,v $
+ * Revision 1.1  1992/07/24  06:27:38  root
+ * Initial revision
+ *
+ * Revision 1.2  1992/07/04  18:41:49  root
+ * Replaced distribution with current drivers
+ *
+ * Revision 1.3  1992/06/23  23:58:20  root
+ * Fixes.
+ *
+ * Revision 1.2  1992/05/26  22:13:23  root
+ * Changed bug that prevented DMA above first 2 mbytes.
+ *
+ * Revision 1.1  1992/05/22  21:00:29  root
+ * Initial revision
+ *
+ * Revision 1.1  1992/04/24  18:01:50  root
+ * Initial revision
+ *
+ * Revision 1.1  1992/04/02  03:23:13  drew
+ * Initial revision
+ *
+ * Revision 1.3  1992/01/27  14:46:29  tthorn
+ * *** empty log message ***
+ *
+ */
+
+#include <linux/types.h>
+
+/* I/O Port interface 4.2 */
+/* READ */
+#define STATUS(base) base
+#define STST	0x80		/* Self Test in Progress */
+#define DIAGF	0x40		/* Internal Diagnostic Failure */
+#define INIT	0x20		/* Mailbox Initialization Required */
+#define IDLE	0x10		/* SCSI Host Adapter Idle */
+#define CDF	0x08		/* Command/Data Out Port Full */
+#define DF	0x04		/* Data In Port Full */
+#define INVDCMD	0x01		/* Invalid H A Command */
+#define STATMASK 0xfd		/* 0x02 is reserved */
+
+#define INTRFLAGS(base) (STATUS(base)+2)
+#define ANYINTR	0x80		/* Any Interrupt */
+#define SCRD	0x08		/* SCSI Reset Detected */
+#define HACC	0x04		/* HA Command Complete */
+#define MBOA	0x02		/* MBO Empty */
+#define MBIF	0x01		/* MBI Full */
+#define INTRMASK 0x8f
+
+/* WRITE */
+#define CONTROL(base) STATUS(base)
+#define HRST	0x80		/* Hard Reset */
+#define SRST	0x40		/* Soft Reset */
+#define IRST	0x20		/* Interrupt Reset */
+#define SCRST	0x10		/* SCSI Bus Reset */
+
+/* READ/WRITE */
+#define DATA(base) (STATUS(base)+1)
+#define CMD_NOP		0x00	/* No Operation */
+#define CMD_MBINIT	0x01	/* Mailbox Initialization */
+#define CMD_START_SCSI	0x02	/* Start SCSI Command */
+#define CMD_INQUIRY	0x04	/* Adapter Inquiry */
+#define CMD_EMBOI	0x05	/* Enable MailBox Out Interrupt */
+#define CMD_BUSON_TIME	0x07	/* Set Bus-On Time */
+#define CMD_BUSOFF_TIME	0x08	/* Set Bus-Off Time */
+#define CMD_DMASPEED	0x09	/* Set AT Bus Transfer Speed */
+#define CMD_RETDEVS	0x0a	/* Return Installed Devices */
+#define CMD_RETCONF	0x0b	/* Return Configuration Data */
+#define CMD_RETSETUP	0x0d	/* Return Setup Data */
+#define CMD_ECHO	0x1f	/* ECHO Command Data */
+
+#define CMD_EXTBIOS     0x28    /* Return extend bios information only 1542C */
+#define CMD_MBENABLE    0x29    /* Set Mailbox Interface enable only 1542C */
+
+/* Mailbox Definition 5.2.1 and 5.2.2 */
+struct mailbox {
+  unchar status;		/* Command/Status */
+  unchar ccbptr[3];		/* msb, .., lsb */
+};
+
+/* This is used with scatter-gather */
+struct chain {
+  unchar datalen[3];		/* Size of this part of chain */
+  unchar dataptr[3];		/* Location of data */
+};
+
+/* These belong in scsi.h also */
+static inline void any2scsi(u8 *p, u32 v)
+{
+	p[0] = v >> 16;
+	p[1] = v >> 8;
+	p[2] = v;
+}
+
+#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
+
+#define xany2scsi(up, p)	\
+(up)[0] = ((long)(p)) >> 24;	\
+(up)[1] = ((long)(p)) >> 16;	\
+(up)[2] = ((long)(p)) >> 8;	\
+(up)[3] = ((long)(p));
+
+#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
+		      + (((long)(up)[2]) <<  8) +  ((long)(up)[3]) )
+
+#define MAX_CDB 12
+#define MAX_SENSE 14
+
+struct ccb {			/* Command Control Block 5.3 */
+  unchar op;			/* Command Control Block Operation Code */
+  unchar idlun;			/* op=0,2:Target Id, op=1:Initiator Id */
+				/* Outbound data transfer, length is checked*/
+				/* Inbound data transfer, length is checked */
+				/* Logical Unit Number */
+  unchar cdblen;		/* SCSI Command Length */
+  unchar rsalen;		/* Request Sense Allocation Length/Disable */
+  unchar datalen[3];		/* Data Length (msb, .., lsb) */
+  unchar dataptr[3];		/* Data Pointer */
+  unchar linkptr[3];		/* Link Pointer */
+  unchar commlinkid;		/* Command Linking Identifier */
+  unchar hastat;		/* Host Adapter Status (HASTAT) */
+  unchar tarstat;		/* Target Device Status */
+  unchar reserved[2];
+  unchar cdb[MAX_CDB+MAX_SENSE];/* SCSI Command Descriptor Block */
+				/* REQUEST SENSE */
+};
+
+static int aha1542_detect(Scsi_Host_Template *);
+static int aha1542_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int aha1542_abort(Scsi_Cmnd * SCpnt);
+static int aha1542_bus_reset(Scsi_Cmnd * SCpnt);
+static int aha1542_dev_reset(Scsi_Cmnd * SCpnt);
+static int aha1542_host_reset(Scsi_Cmnd * SCpnt);
+#if 0
+static int aha1542_old_abort(Scsi_Cmnd * SCpnt);
+static int aha1542_old_reset(Scsi_Cmnd *, unsigned int);
+#endif
+static int aha1542_biosparam(struct scsi_device *, struct block_device *,
+		sector_t, int *);
+
+#define AHA1542_MAILBOXES 8
+#define AHA1542_SCATTER 16
+#define AHA1542_CMDLUN 1
+
+#endif