[SCSI] be2iscsi: Config parameters update for Dual Chute Support

On the adapter iSCSI protocol can be loaded on either one or both
the CHUTE.Check on which CHUTE iSCSI Protocol is loaded and get
configuration parameters based on which driver initization is done.

For BE-X family iSCSI protocol is loaded only on single chute.

Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 60 insertions, 17 deletions

diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 2efad040b6ae..c46a60b883eb 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -278,6 +278,18 @@ unsigned int mgmt_get_session_info(struct beiscsi_hba *phba,
 	return tag;
 }
 
+/**
+ * mgmt_get_fw_config()- Get the FW config for the function
+ * @ctrl: ptr to Ctrl Info
+ * @phba: ptr to the dev priv structure
+ *
+ * Get the FW config and resources available for the function.
+ * The resources are created based on the count received here.
+ *
+ * return
+ *	Success: 0
+ *	Failure: Non-Zero Value
+ **/
 int mgmt_get_fw_config(struct be_ctrl_info *ctrl,
 				struct beiscsi_hba *phba)
 {
@@ -291,31 +303,62 @@ int mgmt_get_fw_config(struct be_ctrl_info *ctrl,
 	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
-			   OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
+			   OPCODE_COMMON_QUERY_FIRMWARE_CONFIG,
+			   EMBED_MBX_MAX_PAYLOAD_SIZE);
 	status = be_mbox_notify(ctrl);
 	if (!status) {
+		uint8_t ulp_num = 0;
 		struct be_fw_cfg *pfw_cfg;
 		pfw_cfg = req;
+
+		for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++)
+			if (pfw_cfg->ulp[ulp_num].ulp_mode &
+			    BEISCSI_ULP_ISCSI_INI_MODE)
+				set_bit(ulp_num,
+					&phba->fw_config.ulp_supported);
+
 		phba->fw_config.phys_port = pfw_cfg->phys_port;
-		phba->fw_config.iscsi_icd_start =
-					pfw_cfg->ulp[0].icd_base;
-		phba->fw_config.iscsi_icd_count =
-					pfw_cfg->ulp[0].icd_count;
-		phba->fw_config.iscsi_cid_start =
-					pfw_cfg->ulp[0].sq_base;
-		phba->fw_config.iscsi_cid_count =
-					pfw_cfg->ulp[0].sq_count;
-		if (phba->fw_config.iscsi_cid_count > (BE2_MAX_SESSIONS / 2)) {
-			beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
-				    "BG_%d : FW reported MAX CXNS as %d\t"
-				    "Max Supported = %d.\n",
-				    phba->fw_config.iscsi_cid_count,
-				    BE2_MAX_SESSIONS);
-			phba->fw_config.iscsi_cid_count = BE2_MAX_SESSIONS / 2;
+		for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) {
+			if (test_bit(ulp_num, &phba->fw_config.ulp_supported)) {
+
+				phba->fw_config.iscsi_cid_start[ulp_num] =
+					pfw_cfg->ulp[ulp_num].sq_base;
+				phba->fw_config.iscsi_cid_count[ulp_num] =
+					pfw_cfg->ulp[ulp_num].sq_count;
+
+				phba->fw_config.iscsi_icd_start[ulp_num] =
+					pfw_cfg->ulp[ulp_num].icd_base;
+				phba->fw_config.iscsi_icd_count[ulp_num] =
+					pfw_cfg->ulp[ulp_num].icd_count;
+
+				phba->fw_config.iscsi_chain_start[ulp_num] =
+					pfw_cfg->chain_icd[ulp_num].chain_base;
+				phba->fw_config.iscsi_chain_count[ulp_num] =
+					pfw_cfg->chain_icd[ulp_num].chain_count;
+
+				beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+					    "BG_%d : Function loaded on ULP : %d\n"
+					    "\tiscsi_cid_count : %d\n"
+					    "\t iscsi_icd_count : %d\n",
+					    ulp_num,
+					    phba->fw_config.
+					    iscsi_cid_count[ulp_num],
+					    phba->fw_config.
+					    iscsi_icd_count[ulp_num]);
+			}
 		}
+
+		phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode &
+						  BEISCSI_FUNC_DUA_MODE);
+
+		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+			    "BG_%d : DUA Mode : 0x%x\n",
+			    phba->fw_config.dual_ulp_aware);
+
 	} else {
-		beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_INIT,
+		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
 			    "BG_%d : Failed in mgmt_get_fw_config\n");
+		status = -EINVAL;
 	}
 
 	spin_unlock(&ctrl->mbox_lock);