diff options
author | Krishna Gudipati <kgudipat@brocade.com> | 2011-06-25 05:28:17 +0200 |
---|---|---|
committer | James Bottomley <JBottomley@Parallels.com> | 2011-06-30 00:25:44 +0200 |
commit | 3d7fc66dcd8d510aaa46ab9b914b632bc149b05c (patch) | |
tree | 256cf906d79359a90c462b5c1d08dc1969b6b7ed /drivers/scsi/bfa/bfa_defs.h | |
parent | [SCSI] bfa: Added support for flash configuration (diff) | |
download | linux-3d7fc66dcd8d510aaa46ab9b914b632bc149b05c.tar.xz linux-3d7fc66dcd8d510aaa46ab9b914b632bc149b05c.zip |
[SCSI] bfa: Added HBA diagnostics support.
- Added diagnostics sub-module to BFA.
- Implemented interface to perform memtest/loopback test
and some other diagnostics tests.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/bfa/bfa_defs.h')
-rw-r--r-- | drivers/scsi/bfa/bfa_defs.h | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h index 97ad07c4aee0..ddf13d74e4b0 100644 --- a/drivers/scsi/bfa/bfa_defs.h +++ b/drivers/scsi/bfa/bfa_defs.h @@ -132,7 +132,9 @@ enum bfa_status { BFA_STATUS_EPROTOCOL = 6, /* Protocol error */ BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */ BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */ + BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted */ BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */ + BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */ BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */ BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */ BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */ @@ -140,19 +142,25 @@ enum bfa_status { BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported limit */ BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed setting */ BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */ + BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */ BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */ BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */ BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */ + BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port */ BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the rport */ BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists * contact support */ BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */ + BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled */ BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational */ BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version mismatch */ BFA_STATUS_DIAG_BUSY = 71, /* diag busy */ + BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */ BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */ BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */ BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */ + BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */ + BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */ BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */ BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot * configuration */ @@ -881,6 +889,56 @@ struct bfa_flash_attr_s { struct bfa_flash_part_attr_s part[BFA_FLASH_PART_MAX]; }; +/* + * DIAG module specific + */ +#define LB_PATTERN_DEFAULT 0xB5B5B5B5 +#define QTEST_CNT_DEFAULT 10 +#define QTEST_PAT_DEFAULT LB_PATTERN_DEFAULT + +struct bfa_diag_memtest_s { + u8 algo; + u8 rsvd[7]; +}; + +struct bfa_diag_memtest_result { + u32 status; + u32 addr; + u32 exp; /* expect value read from reg */ + u32 act; /* actually value read */ + u32 err_status; /* error status reg */ + u32 err_status1; /* extra error info reg */ + u32 err_addr; /* error address reg */ + u8 algo; + u8 rsv[3]; +}; + +struct bfa_diag_loopback_result_s { + u32 numtxmfrm; /* no. of transmit frame */ + u32 numosffrm; /* no. of outstanding frame */ + u32 numrcvfrm; /* no. of received good frame */ + u32 badfrminf; /* mis-match info */ + u32 badfrmnum; /* mis-match fram number */ + u8 status; /* loopback test result */ + u8 rsvd[3]; +}; + +struct bfa_diag_ledtest_s { + u32 cmd; /* bfa_led_op_t */ + u32 color; /* bfa_led_color_t */ + u16 freq; /* no. of blinks every 10 secs */ + u8 led; /* bitmap of LEDs to be tested */ + u8 rsvd[5]; +}; + +struct bfa_diag_loopback_s { + u32 loopcnt; + u32 pattern; + u8 lb_mode; /* bfa_port_opmode_t */ + u8 speed; /* bfa_port_speed_t */ + u8 rsvd[2]; +}; + #pragma pack() #endif /* __BFA_DEFS_H__ */ |