[SCSI] bfa: Add PowerPC support and enable PCIE AER handling.

- Added few missing endian swap changes to support BFA on PowerPC.
- Added PCIE AER support to BFA:
  a) Implemented the PCI error handler entry points.
  b) Made changes to FCS state machine to handle STOP event from the
	 PCI error detected entry point.
  c) Made changes to the IO Controller state machine to handle SUSPEND
     event from the PCI error detected entry point.
  d) Made changes to restart the BFA operations on a slot_reset completion.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 226 insertions, 6 deletions

diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 2c8f0c713076..ab11ef0f8466 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -736,6 +736,9 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
 		}
 	}
 
+	/* Enable PCIE Advanced Error Recovery (AER) if kernel supports */
+	pci_enable_pcie_error_reporting(pdev);
+
 	bfad->pci_bar0_kva = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
 	bfad->pci_bar2_kva = pci_iomap(pdev, 2, pci_resource_len(pdev, 2));
 
@@ -806,6 +809,8 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
 		}
 	}
 
+	pci_save_state(pdev);
+
 	return 0;
 
 out_release_region:
@@ -822,6 +827,8 @@ bfad_pci_uninit(struct pci_dev *pdev, struct bfad_s *bfad)
 	pci_iounmap(pdev, bfad->pci_bar0_kva);
 	pci_iounmap(pdev, bfad->pci_bar2_kva);
 	pci_release_regions(pdev);
+	/* Disable PCIE Advanced Error Recovery (AER) */
+	pci_disable_pcie_error_reporting(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 }
@@ -1258,6 +1265,16 @@ bfad_setup_intr(struct bfad_s *bfad)
 
 		error = pci_enable_msix(bfad->pcidev, msix_entries, bfad->nvec);
 		if (error) {
+			/* In CT1 & CT2, try to allocate just one vector */
+			if (bfa_asic_id_ctc(pdev->device)) {
+				printk(KERN_WARNING "bfa %s: trying one msix "
+				       "vector failed to allocate %d[%d]\n",
+				       bfad->pci_name, bfad->nvec, error);
+				bfad->nvec = 1;
+				error = pci_enable_msix(bfad->pcidev,
+						msix_entries, bfad->nvec);
+			}
+
 			/*
 			 * Only error number of vector is available.
 			 * We don't have a mechanism to map multiple
@@ -1267,12 +1284,13 @@ bfad_setup_intr(struct bfad_s *bfad)
 			 *  vectors. Linux doesn't duplicate vectors
 			 * in the MSIX table for this case.
 			 */
-
-			printk(KERN_WARNING "bfad%d: "
-				"pci_enable_msix failed (%d),"
-				" use line based.\n", bfad->inst_no, error);
-
-			goto line_based;
+			if (error) {
+				printk(KERN_WARNING "bfad%d: "
+				       "pci_enable_msix failed (%d), "
+				       "use line based.\n",
+					bfad->inst_no, error);
+				goto line_based;
+			}
 		}
 
 		/* Disable INTX in MSI-X mode */
@@ -1470,6 +1488,197 @@ bfad_pci_remove(struct pci_dev *pdev)
 	kfree(bfad);
 }
 
+/*
+ * PCI Error Recovery entry, error detected.
+ */
+static pci_ers_result_t
+bfad_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct bfad_s *bfad = pci_get_drvdata(pdev);
+	unsigned long	flags;
+	pci_ers_result_t ret = PCI_ERS_RESULT_NONE;
+
+	dev_printk(KERN_ERR, &pdev->dev,
+		   "error detected state: %d - flags: 0x%x\n",
+		   state, bfad->bfad_flags);
+
+	switch (state) {
+	case pci_channel_io_normal: /* non-fatal error */
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		bfad->bfad_flags &= ~BFAD_EEH_BUSY;
+		/* Suspend/fail all bfa operations */
+		bfa_ioc_suspend(&bfad->bfa.ioc);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		del_timer_sync(&bfad->hal_tmo);
+		ret = PCI_ERS_RESULT_CAN_RECOVER;
+		break;
+	case pci_channel_io_frozen: /* fatal error */
+		init_completion(&bfad->comp);
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		bfad->bfad_flags |= BFAD_EEH_BUSY;
+		/* Suspend/fail all bfa operations */
+		bfa_ioc_suspend(&bfad->bfa.ioc);
+		bfa_fcs_stop(&bfad->bfa_fcs);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		wait_for_completion(&bfad->comp);
+
+		bfad_remove_intr(bfad);
+		del_timer_sync(&bfad->hal_tmo);
+		pci_disable_device(pdev);
+		ret = PCI_ERS_RESULT_NEED_RESET;
+		break;
+	case pci_channel_io_perm_failure: /* PCI Card is DEAD */
+		spin_lock_irqsave(&bfad->bfad_lock, flags);
+		bfad->bfad_flags |= BFAD_EEH_BUSY |
+				    BFAD_EEH_PCI_CHANNEL_IO_PERM_FAILURE;
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+		/* If the error_detected handler is called with the reason
+		 * pci_channel_io_perm_failure - it will subsequently call
+		 * pci_remove() entry point to remove the pci device from the
+		 * system - So defer the cleanup to pci_remove(); cleaning up
+		 * here causes inconsistent state during pci_remove().
+		 */
+		ret = PCI_ERS_RESULT_DISCONNECT;
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return ret;
+}
+
+int
+restart_bfa(struct bfad_s *bfad)
+{
+	unsigned long flags;
+	struct pci_dev *pdev = bfad->pcidev;
+
+	bfa_attach(&bfad->bfa, bfad, &bfad->ioc_cfg,
+		   &bfad->meminfo, &bfad->hal_pcidev);
+
+	/* Enable Interrupt and wait bfa_init completion */
+	if (bfad_setup_intr(bfad)) {
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "%s: bfad_setup_intr failed\n", bfad->pci_name);
+		bfa_sm_send_event(bfad, BFAD_E_INTR_INIT_FAILED);
+		return -1;
+	}
+
+	init_completion(&bfad->comp);
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	bfa_iocfc_init(&bfad->bfa);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	/* Set up interrupt handler for each vectors */
+	if ((bfad->bfad_flags & BFAD_MSIX_ON) &&
+	    bfad_install_msix_handler(bfad))
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "%s: install_msix failed.\n", bfad->pci_name);
+
+	bfad_init_timer(bfad);
+	wait_for_completion(&bfad->comp);
+	bfad_drv_start(bfad);
+
+	return 0;
+}
+
+/*
+ * PCI Error Recovery entry, re-initialize the chip.
+ */
+static pci_ers_result_t
+bfad_pci_slot_reset(struct pci_dev *pdev)
+{
+	struct bfad_s *bfad = pci_get_drvdata(pdev);
+	u8 byte;
+
+	dev_printk(KERN_ERR, &pdev->dev,
+		   "bfad_pci_slot_reset flags: 0x%x\n", bfad->bfad_flags);
+
+	if (pci_enable_device(pdev)) {
+		dev_printk(KERN_ERR, &pdev->dev, "Cannot re-enable "
+			   "PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	pci_restore_state(pdev);
+
+	/*
+	 * Read some byte (e.g. DMA max. payload size which can't
+	 * be 0xff any time) to make sure - we did not hit another PCI error
+	 * in the middle of recovery. If we did, then declare permanent failure.
+	 */
+	pci_read_config_byte(pdev, 0x68, &byte);
+	if (byte == 0xff) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "slot_reset failed ... got another PCI error !\n");
+		goto out_disable_device;
+	}
+
+	pci_save_state(pdev);
+	pci_set_master(pdev);
+
+	if (pci_set_dma_mask(bfad->pcidev, DMA_BIT_MASK(64)) != 0)
+		if (pci_set_dma_mask(bfad->pcidev, DMA_BIT_MASK(32)) != 0)
+			goto out_disable_device;
+
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+
+	if (restart_bfa(bfad) == -1)
+		goto out_disable_device;
+
+	pci_enable_pcie_error_reporting(pdev);
+	dev_printk(KERN_WARNING, &pdev->dev,
+		   "slot_reset completed  flags: 0x%x!\n", bfad->bfad_flags);
+
+	return PCI_ERS_RESULT_RECOVERED;
+
+out_disable_device:
+	pci_disable_device(pdev);
+	return PCI_ERS_RESULT_DISCONNECT;
+}
+
+static pci_ers_result_t
+bfad_pci_mmio_enabled(struct pci_dev *pdev)
+{
+	unsigned long	flags;
+	struct bfad_s *bfad = pci_get_drvdata(pdev);
+
+	dev_printk(KERN_INFO, &pdev->dev, "mmio_enabled\n");
+
+	/* Fetch FW diagnostic information */
+	bfa_ioc_debug_save_ftrc(&bfad->bfa.ioc);
+
+	/* Cancel all pending IOs */
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	init_completion(&bfad->comp);
+	bfa_fcs_stop(&bfad->bfa_fcs);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	wait_for_completion(&bfad->comp);
+
+	bfad_remove_intr(bfad);
+	del_timer_sync(&bfad->hal_tmo);
+	pci_disable_device(pdev);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static void
+bfad_pci_resume(struct pci_dev *pdev)
+{
+	unsigned long	flags;
+	struct bfad_s *bfad = pci_get_drvdata(pdev);
+
+	dev_printk(KERN_WARNING, &pdev->dev, "resume\n");
+
+	/* wait until the link is online */
+	bfad_rport_online_wait(bfad);
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	bfad->bfad_flags &= ~BFAD_EEH_BUSY;
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
 struct pci_device_id bfad_id_table[] = {
 	{
 		.vendor = BFA_PCI_VENDOR_ID_BROCADE,
@@ -1513,11 +1722,22 @@ struct pci_device_id bfad_id_table[] = {
 
 MODULE_DEVICE_TABLE(pci, bfad_id_table);
 
+/*
+ * PCI error recovery handlers.
+ */
+static struct pci_error_handlers bfad_err_handler = {
+	.error_detected = bfad_pci_error_detected,
+	.slot_reset = bfad_pci_slot_reset,
+	.mmio_enabled = bfad_pci_mmio_enabled,
+	.resume = bfad_pci_resume,
+};
+
 static struct pci_driver bfad_pci_driver = {
 	.name = BFAD_DRIVER_NAME,
 	.id_table = bfad_id_table,
 	.probe = bfad_pci_probe,
 	.remove = __devexit_p(bfad_pci_remove),
+	.err_handler = &bfad_err_handler,
 };
 
 /*